RequiredExperience with Government
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Mobile Toilet ( 2 pieces ) Technical Specifications * As per GeM Category Specification 1/8 Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use Number of Compartments 6-seater mobile toilet 6-seater mobile toilet Type of WC Indian with steel base Indian with steel base Number of WC 6 6 Number of Bathrooms 0 0 Number of Urinals 0 0 Water facility By mean of overhead tank(Capacity 500Ltrs) By mean of overhead tank(Capacity 500Ltrs) Wash basin 2 Nos. outside the Unit with common facility 2 Nos. outside the Unit with common facility Sewage facility Sludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater) Sludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater) ventilation Full size cross ventilation Full size cross ventilation Top(roof) shape Slanting/tapper * Projection of Roof 100mm projection from front and 50mm projection on other sides(slanting shape) 100mm projection from front and 50mm projection on other sides(slanting shape) Installation and commissioning To be done by seller To be done by seller Plumbing and Sanitation fitting connections To be done by seller To be done by seller Electrical connections To be done by Consignee himself To be done by Consignee himself Waste extraction fitting To be done by seller To be done by seller Civil foundation No foundation required No foundation required TRAILER STRUCTURAL MATERIAL Trailer frame(Chassis) material with support material including pathway 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) 2/8 MS angle for 4-seater/6 -seater/8-seater and 10-seater MS angle for 4-seater/6 -seater/8-seater and 10-seater Railing material 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required8-seater & 10-seater) Trailer understructure Spring leaves 710mm with 9 leaves for 4-seater and 6-seater Spring leaves 710mm with 9 leaves for 4-seater and 6-seater Turn table/rotor 100mm X 50mm MS channel and 10mm thick MS plate plus spring ply 40mm X 5mm * Pathway passage/slide platform Aluminum chequerd sheet having width of 455mm * Stairs frame material 35mm x 35mm X 5mm MS angle and 25mm x 25mm x 3mm MS angle with 25mm x 3mm MS Flat * Stairs size 710mm X 230mm having 4-step for 1420mm Height and 735mm width stair * Locking Locking pins to be provided for lock the platform * Tow bar Made of 100 X 50 mm channel section with easy detachable and connect with turn table Made of 100 X 50 mm channel section with easy detachable and connect with turn table FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) Top(roof) frame material 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle Top(roof) support frame structure 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat 3/8 Partition frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS * Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe 50mm X 25mm of 14-16gauge rectangular MS hollow pipe Support material for Door panel fixing Aluminium U-channel of 18gauge Aluminium U-channel of 18gauge Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS * Tank holder frame material 1125mm X 820mm outer ring(tubular structure)-MS 1125mm X 820mm outer ring(tubular structure)-MS PANEL MATERIAL Side panel material 18 gauge MS sheet 18 gauge MS sheet Top(Roof) panel material 4mm polycarbonate sheet with U channel for water drain 4mm polycarbonate sheet with U channel for water drain Door panel material Fitted with plastic light weight LLDPE roto moulded Fitted with plastic light weight LLDPE roto moulded partition panel material Single layer 3mm thick FRP Single layer 3mm thick FRP Floor material Anti skid tile finish floor inside toilet Anti skid tile finish floor inside toilet DIMENSION Size of each cubical(LXWXH) ± 25mm 890mm X 840mm X 1980mm 890mm X 840mm X 1980mm Door size(WxH) ± 20mm 610mm X 1750mm * Ventilation size(WXH) ± 10mm 650mm X 40mm * Partition height ± 20mm 1830mm * Single pan size ± 10mm 580mm X 440mm with built in platform/footrest * Overall Length(mm) ± 25mm 3955mm for 6-seater 3955mm for 6-seater Overall Width including pathway(mm) ± 25mm 2700mm for 4/6/8 and 10-seater 2700mm for 4/6/8 and 10-seater 4/8 Total height ± 25mm 3155mm * SEWAGE SUCTION UNIT Capacity of sewage suction unit N.A * Length of sewage suction unit ± 25mm N.A * Width of sewage suction unit ± 15mm N.A * Capsule Diameter N.A * Capsule Thickness N.A * Chassis size of sewage suction unit N.A * Suction pump N.A * Valve for sewage suction unit N.A * Axle for sewage suction unit N.A * Tyres for sewage suction unit N.A * Spring leaves for sewage suction unit N.A * MISC Door locking bolts Size 100mm of MS * Tower bolt locking Tower bolt of MS size 75mm * Overhead Tank material made of PVC * Wash basin material made of SS 304 * WC material made of SS 304 * Towel rail/ring made of SS * Cloth hook made of SS 304 * P-trap material made of PVC(75mm) * Footrest(WC) material made of FRP integrated with Indian WC and floor made of FRP integrated with Indian WC and floor Sewage tank material Sludge tank made of FRP 4mm(for 4-seater/6 -seater/8-seater & 10-seater) * Mirror size 380mm X 255mm 380mm X 255mm Electric provision By mean solar energy * Sewage provision Sucked by sewage suction unit * Level indicator provision N.A * 5/8 Water supply connection UPVC pipe connection with all toilet interconnecting * Seat cistern fitting NO cistern NO cistern Soap stand SS 304 made Size:125 X 75 mm * Tap material PVC push cock * Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) * Trailer Movement facility Two axle of 50mm X 50mm X 1828mm with 4-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater Two axle of 50mm X 50mm X 1828mm with 4-tyres of size 6.00 X 16 with hubs and bearings for 4-seater and 6-seater Provision for vent pipe From sludge/Septic tank * Water mug(standard size) Plastic made * Electric point 1 No. electric point to be provided in all toilet 2 watt LED * Stand provision to keep mobile toilet in static position N.A * COLOUR & FINISH Colour of cabin As per buyer's choice * Finish With Primer and Paint * CERTIFICATION Test reports to be furnished to buyer's on demand YES * OEM of offered product is ISO 9001:2015 certified YES * WARRANTY Warranty period in number of years 1 1 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
