Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹75 L
EMD Value
₹75,000
Closing Date
7 Feb 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COMMISSIONER JUNAGADH MUNICIPAL CORPORATION
Annual Rate Contract for Provinding , Erecting And Maintenance work of Different Size of Electrical Pumping Machinery ( Electro- Mechanical Work) and Handpump repairing at Junagadh Municipal Corporation area
265168
E-Tender No.JuMC /WW /NIT No.11
Open
Electrical and Maintenance Works
Works
Junagadh
12 documents required · 12 mandatory
₹5,000
Yes
Commissioner,Municipal Corporation Junagadh
₹75,000
Yes
19 Jan 2026
19 Jan 2026
19 Jan 2026
7 Feb 2026
19 Jan 2026
Name Of Work:- Annual Rate Contract for Provinding , Erecting And Maintenance work of
Different Size of Electrical Pumping Machinery ( Electro- Mechanical Work) and Handpump
repairing at Junagadh Municipal Corporation area
Motor Pump Starters & Starter Accessories
Item No Description Unit Qty Rate (Excl.
Providing and erecting AC-3 duty 3 pole power
contactor with 2 NO & 2 NC aux contacts complete
with 415V/220V operating coil suitable for (L&T,
BCH,T.C., Siemens, C&S make).
(a) for 25 / 32 A rating Ea. 1.00
(b) for 40 A rating Ea. 1.00
(c) for 60 / 70 A rating Ea. 1.00
(d) For 80 / 95 A Rating Ea. 1.00
(e) for 110 A rating Ea. 1.00
Providing and erecting AC-3 duty 3 pole power
2 contactors spare kits (L & T, C&S, BCH,T.C. Siemens,
(a) for 25 / 32 A rating Ea. 1.00
(b) for 40 A rating Ea. 1.00
(c) for 60 / 70 A rating Ea. 1.00
(d) For 80 / 95 A Rating Ea. 1.00
(e) for 110 A rating Ea. 1.00
Providing and erecting AC-3 duty 3 pole power
3 contactor thermal over load relay ( L & T BCH /
Siemens, / C & S / Alstom make)
(a) For 4 - 15 Amp. rating Ea. 1.00
(b) For 25 Amp rating, Ea. 1.00
(c) For 32 Amp. rating Ea. 1.00
(d) For 40 Amp. Ea. 1.00
[e] For 48 to 70 Amp. Ea. 1.00
(f) For 80 to 110 Amp. Ea. 1.00
Providing and erecting AC-3 duty 4 pole A.C. Coil with
2 NO & 2 NC aux contacts complete with 415V/220V
operating coil suitable for (L&T, BCH,T.C., Siemens,
(a) for 25 / 32 A rating Ea 1.00
(b) for 40 A rating Ea 1.00
(c) for 60 / 70 A rating Ea 1.00
(d) For 80 / 95 A Rating Ea 1.00
(e) for 110 A rating Ea 1.00
Pro. & erecting electronic overload relay with single
5 phasing preventer [ (L&T, Alstom, BCH,T.C.,
Siemens, C&S make).
[a] for 30 to 50 Amp. Ea 1.00
[B[ for 48 to 150 Amp. Ea 1.00
Providing and erecting operating coil for power
(a) for 32A/40A Ea. 1.00
(b) for 70A/110A Ea. 1.00
Pro. & erecting motor protection circuit breaker with
shock proof enclosure (IP 65) erected as per direction
for following motor HP 3 phase 440V A.C.
[A] up to 5 Hp 7 to 10 Amp. Ea 1.00
[B] up to 7.5 HP / 10 HP 12 to 18 Amp. Ea 1.00
[C] up to 15 HP 18 to 26 Amp. Ea 1.00
[D] up to 20 HP 24 to 36 Amp. Ea 1.00
Meters & Panel Accessories
Supplying and erecting approved make Analog type
voltmeter moving iron with square/ Round Dial,
8 flush/pedestal mounting pattern for A.C.Voltage 0 to Ea. 1.00
500 Volt range, erected on panel board with all
connection, wiring etc.
Supplying and erecting approved make panel
mounting type Digital Voltmeter having 3 digits LED
9 display, 0 to 750 AC Volts range erected on existing Ea. 1.00
panel board with all connection, wiring etc .with
manufacturers calibration certificate.
Supplying and erecting approved make Analog type
moving iron Ammeter direct reading type 0-30A AC
10 current, 500 V square /. Round dial, flush or Ea. 1.00
projection type complete erected with connection and
Supplying and erecting approved make panel
mounting type Digital Ammeter having 3 digits LED
display, external CT operated, calibrated for 0 to
11 Amps suitable to operate on 500 Volt AC , erected on Ea. 1.00
existing panel board with all connection, wiring etc
.with manufacturers calibration certificate.
Supplying and erecting approved make Analog type
moving iron C.T operated Ammeter A C Current
12 suitable slide in scale 0- 400 Amp. with 3 Nos. of Ea. 1.00
Current Transformer erected on panel board with
Supplying and erecting Ammeter / Voltmeter selector
13 switch for 3 phase AC Supply 500 V on existing panel Ea. 1.00
board with necessary connections.
Providing & erecting L.T. Current Transformer with
bar primary 50/5 to 1000/5 ratio 15 VA burden erected
in existing CRCA box duly secured with insulating
materials connected to the meter
Supplying & erecting approved make Power Factor
Meter 150mm dia flush/projection type/ balanced &
unbalanced load to work with appropriately provided
15 CT’s 100/5A to 400/5A ratio & other accessories Ea. 1.00
complete erected in M.S. box & connected to the
circuit by means of PVC copper Core leads.
Supplying and erecting approved make set of
indicator lamps of LED type lamp, lens cover, Bakelite
holder complete erected with necessary connections.
Supplying & erecting directly operated single phasing
17 preventer complete erected and connected to supply Ea. 1.00
up to 45 Amp. Range.
SECTION 4-6 / CABLE GLANDS.
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(a) 2 to 4 core 2.5 Sq. mm Ea. 1.00
(b) 2 to 4 core 4 Sq. mm Ea. 1.00
(c) 2 to 4 core 6 Sq. mm Ea. 1.00
(d) 2 to 4 core 10 Sq. mm Ea. 1.00
(e) 2 to 4 core 16 Sq. mm Ea. 1.00
(f) 2 to 4 core 25 Sq. mm Ea. 1.00
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(a) 3 core 35/50 Sq. mm Ea. 1.00
(b) 3 core 70 Sq. mm Ea. 1.00
(c) 3 core 95 Sq. mm Ea. 1.00
(d) 3 core 120 Sq. mm Ea. 1.00
(e) 3 core 150 Sq. mm Ea. 1.00
(f) 3 core 185 Sq. mm Ea. 1.00
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(C) 3 & 1/2 core 70 Sq. mm Ea. 1.00
(D) 3 & 1/2 core 95 Sq. mm Ea. 1.00
(E) 3 & 1/2 core 120 Sq. mm Ea. 1.00
(F) 3 & 1/2 core 150 Sq. mm Ea. 1.00
(G) 3 & 1/2 core 185 Sq. mm Ea. 1.00
(H) 3 & 1/2 core 240 Sq. mm Ea. 1.00
(I) 3 & 1/2 core 300 Sq. mm Ea. 1.00
(J) 3 & 1/2 core 400 Sq. mm Ea. 1.00
(K) 3 & 1/2 core 500 Sq. mm Ea. 1.00
SECTION / CABLE LUGS.
Solderless crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly
21 crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated nut
bolts in an approved manner.
Solderless crimping type Copper lugs conforming to
IS suitable for cable of following size evenly crimped
22 with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an
approved manner.
CABLE END TERMINATION BOXES.
Providing and erecting 18 G. M.S. Cable end
termination box, indoor type suitable for switch
complete erected with clamp, bolt, nut etc.. of
following size of TPN.
(A) Suitable for 63/100 Amp. TPN Ea. 1.00
(B) Suitable for 200 Amp. TPN Ea. 1.00
(C) Suitable for 250/300 Amp. TPN Ea. 1.00
(D) Suitable for 400 Amp. TPN Ea. 1.00
(E) Suitable for 600 Amp. TPN Ea. 1.00
(F) Suitable for 800 Amp. TPN Ea. 1.00
Providing and erecting 18 G. M.S. termination box
outdoor type suitable for- 1.1 KV PVC insulated
armoured cable complete erected with clamp, bolts,
nuts etc. suitable of following size of cables.
(A) 3 core 70 / 95 Sq. mm Ea. 1.00
(C) 3 core 240 / 300 Sq. mm Ea. 1.00
(D) 3 core 400 / 500 Sq. mm Ea. 1.00
Providing and erecting Epoxy Outdoor / Indoor end
termination Kit suitable for LT PVC insulated
armoured cable1.1 KV grade complete with ferrule
bushing and accessories and suitable clamps duly
erected and connected to the supply for all cores
cables of following size.
SECTION / CABLE JOINTS
Disconnecting the cable connection and Providing
straight joint with PVC mould using epoxy compound
Insulating material and making the joint complete
26 using necessary in line connectors, hardener, earth
continuity connection, spacers etc. and reconnecting
the same & ensure the joint resistance within the limits
(A) up to 25 Sq mm Cable Ea. 1.00
(B) 35 to 95 Sq. mm cable. Ea. 1.00
(C) 120 to 300 Sq. mm cable. Ea. 1.00
Disconnecting the cable connection and Providing T
joint with PVC mould using epoxy compound
Insulating material and making the joint complete
27 using necessary in line connectors, hardener, earth
continuity connection, spacers etc. and reconnecting
the same & ensure the joint resistance within the limits
(A) up to 25 Sq mm Cable Ea. 1.00
(B) 35 to 95 Sq. mm cable. Ea. 1.00
(C) 120 to 300 Sq. mm cable. Ea. 1.00
SECTION / SWITCHGEARS WITH REWIRABLE FUSES
Approved make Double Pole Plastic Switch and fuse
28 250V., 30A confirming to IS erected on Polished Ea. 1.00
wooden block as directed.
Providing Approved make Double Pole Cast Iron
29 Clad Switch & rewirable Fuse 240 / 250 V confirming
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Erection & connection charges for 16A / 32 A DP as
(a) on existing wooden block / A.I. frame Ea. 1.00
(b) on polished wooden block. Ea. 1.00
(c) on angle iron frame duly painted with Red Oxide
Providing Approved make Triple Pole Cast Iron Clad
31 Switch & rewirable Fuse with neutral link 415/500 V
confirming to IS
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Erection & connection Charges For 16A/32A TP as
(a) on existing wooden block / A.I.frame Ea. 1.00
(b) on polished wooden block. Ea. 1.00
(c) on angle iron frame duly painted with Red Oxide
Providing Approved make Triple Pole Metal / Iron
33 Clad Switch & Fuse with neutral link 415/500 V
confirming to IS
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Erection & connection Charges for 63A/100A TP as
(a) on existing wooden block / A.I.frame Ea. 1.00
(b) Erection on angle iron frame duly painted with Red
SECTION / SWITCHGEARS WITH HRC FUSES.
Providing Approved make Triple Pole Metal Clad
35 Switch Fuse Unit 415/500 V. with HRC fuse of
suitable load and neutral link confirming to IS.
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Providing Approved make Triple Pole Metal Clad
36 Switch Fuse Unit 415/500 V. with HRC fuse of
suitable load and neutral link confirming to IS
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Providing Approved make Triple Pole metal clad
37 switch fuse unit 415 / 500V. 400 A with HRC fuse of
suitable load and neutral link confirming to IS
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Erection & connection charges for 32A/ 63 A / 100 A
HRC TPN as following
(a)on existing wooden block / A.I.frame Ea. 1.00
(b)Erection on New angle iron frame duly painted with
Erection & connection Charges for 200A/ 250A/ 300 A
/325/400 A HRC TPN as following
(a)on existing wooden block / A.I. frame Ea. 1.00
(b)Erection on New angle iron frame duly painted with
SECTION / PANEL MOUNTING SWITCHGEARS
Providing Approved make panel mounting front fixing
rotary switch (CAM Switch) with face plate with double
pair of contacts with two fix and a moving contacts,
40 operated by means of slide, rest on disk with grooves
for sequential operation rotated by switch handle,
square shaft and knob for Two way with off
Approved make Three Phase & Neutral LT Heavy
Duty Switch Disconnector Fuse Unit Cubical type for
panel mounting complete with operating mechanism
41 suitable to operate on 415V A.C. , 23A duty With HRC
fuses of suitable load confirming to IS. 13947 (Part I
& III). of following capacities.
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
(c) 100Amp/125 Amp
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Approved make Four Pole LT Heavy Duty Switch
Disconnector Fuse Unit Cubical type for panel
mounting complete with operating mechanism suitable
to operate on 415V A.C. With HRC fuses of suitable
load confirming to IS. 13947 (Part I & III). of following
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Cat.II Ea. 1.00
Cat.III Ea. 1.00
Supplying & erecting following spare parts for panel
mounting Switch Disconnector Fuse Units
44 Operational Handle Assembly Complete for
45 Operating Shaft (Extensible) for
46 Cable Terminal ( ‘Z" Type) Set of Two for
(iii) 630 / 800 Amps Ea. 1.00
47 Cable Terminal ( ‘Plain" Type)Set of Four for
(iii) 250 / 320 Amps Ea. 1.00
48 HRC Fuse Contacts Set of six for
(ii) 125 Amps Ea. 1.00
Moving Contact finger of Set of Six for 32 / 63 /
Moving Contact finger of Set of Eight for 200 / 250 /
51 Neutral Link for
SECTION / MOULDED CASE CIRCUIT BREAKERS
Note:- Add Rs. 500/- extra for housing of MCCB for Item No 3-4-1 to 3-4-12
Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 25 KA. at
415 V,having normal current rating up to 25 A to
52 100A. with Fixed thermal & magnetic release suitable
to work on A.C. supply 50 c/s. with all internal
connections & complete erected in existing 16 G.M.S.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 35 KA. at
415 V. having normal current rating up to 125A. with
53 Fixed thermal & magnetic release suitable to work on
A.C.supply 50 c/s. with all internal connections &
complete erected in existing 16 G.M.S. housing.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 35 KA. at
415 V. having Normal current rating up to 200A.with
54 variable Thermal & magnetic release suitable to work
on A.C.supply 50 c/s. with all internal connections &
complete erected in existing 16 G.M.S.housing
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 35 KA. at
415 V . having normal current rating up to 250A. with
55 variable thermal & magnetic release suitable to work
on A.C.supply 50 c/s. with all internal connections &
complete erected in existing 16 G.M.S. housing.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 50 KA at
V having Normal current rating up to 400A. with
56 variable Thermal & magnetic release suitable to work
on A.C.supply 50 c/s. With all internal connections &
complete erected in existing 16 G.M.S. housing.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 50 K.A. at
415 V having normal current rating up to 630A. with
57 variable thermal & magnetic release suitable to work
on A.C.supply 50 c/s. with all internal connections &
complete erected in existing 16 G.M.S. housing
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Four pole moulded case circuit
breaker having breaking capacity ICU of 50 K.A. at
415 V having normal current rating up to 800A.with
58 variable thermal & magnetic release suitable to work
on A.C.supply 50 c/s. with all internal connections &
complete erected in existing 16 G.M.S.housing.
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Three pole moulded case circuit
breaker having breaking capacity ICU of 25 K.A. at
415 V having normal current rating up to 25 A to
59 100A. with Fixed thermal & magnetic release suitable
to work on A.C. supply 50 c/s. with all internal
connections & complete erected in existing 16 G.M.S.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Three pole moulded case circuit
breaker having breaking capacity/strength ICU of
K.A. at 415 V. having normal current rating up to
60 125A.with Fixed thermal & magnetic release suitable
to work on A.C.supply 50 c/s. with all internal
connections & complete erected in existing 16 G.M.S.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Three pole moulded case circuit
breaker having breaking capacity/strength ICU of
K.A. at 415 V. having Normal current rating up to
61 200A.with variable Thermal & magnetic release
suitable to work on A.C.supply 50 c/s. with all internal
connections & complete erected in existing 16 G.M.S.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Three pole moulded case circuit
breaker having breaking capacity/strength ICU of
K.A. at 415V. having normal current rating up to 250A.
62 with variable thermal & magnetic release suitable to
work on A.C.supply 50 c/s. with all internal
connections & complete erected in existing 16 G.M.S.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Three pole moulded case circuit
breaker having breaking capacity/strength ICU of
K.A. at 415 V having Normal current rating up to
63 400A.with variable Thermal & magnetic release
suitable to work on A.C.supply 50 c/s. With all internal
connections & complete erected in existing 16 G.M.S.
Cat-ll Ea. 1.00
ICS=100% of ICU only Cat III Ea. 1.00
Approved make Earth fault Relay suitable to mount
with inter connection to moulded case circuit breaker
having CT ratio & MCCB rating as following along
with shunt trip 220V AC. with all internal connections
& complete erected in existing M.S.housing..
SECTION / PANEL MOUNTING BUSBARS
Supplying and erecting triple pole & neutral 440V/
500V panel mounting Aluminium Busbars with four
equal Nos. of bus having current density not more
than 0.8 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for
phase sequence of following current carrying capacity,
erected with necessary bus bar supports /insulators,
main cable socket to each busbar,erected in existing
cubical panel with necessary connections.
(A) Suitable for 100 Amp. Capacity Rn.Mtr 1.00
(B) Suitable for 200 Amp. Capacity Rn.Mtr 1.00
(C) Suitable for 300 Amp. Capacity Rn.Mtr 1.00
(D) Suitable for 400 Amp. Capacity Rn.Mtr 1.00
(E) Suitable for 630 Amp. capacity Rn.Mtr 1.00
(F) Suitable for 800 Amp. capacity Rn.Mtr 1.00
(G) Suitable for 1200 Amp.capacity Rn.Mtr 1.00
Supplying and erecting triple pole & neutral 440V /
500V panel mounting Copper Busbars with four equal
Nos. of electrolyte bus having current density not
more than 1.6 Amp. / sq.mm (Rated current / cross
section area) duly wrapped with colour insulating tape
for phase sequence of following current carrying
capacity, erected with necessary bus bar supports
/insulators, main cable socket to each bar, erected in
existing cubical panel with necessary connections.
(A) Suitable for 100 Amp. Capacity Rn.Mtr 1.00
(B) Suitable for 200 Amp. capacity Rn.Mtr 1.00
(C) Suitable for 300 Amp. capacity Rn.Mtr 1.00
(D) Suitable for 400 Amp. capacity Rn.Mtr 1.00
(E) Suitable for 630 Amp. capacity Rn.Mtr 1.00
(F) Suitable for 800 Amp. capacity Rn.Mtr 1.00
(G) Suitable for 1200 Amp. Capacity Rn.Mtr 1.00
SECTION / FUSES.
Supplying KITKAT pattern porcelain cut-out with base
67 of following current capacity erected on existing block
Supplying and erecting approved make 415V bakelite
fuse fittings for front connection / busbar type, to
accommodate HRC fuse link, with spin - riveted brass
contact, having thermo plastic inflammable material &
single piece extruded brass box contact to lock with
adequate cable hole to accommodate aluminium
conductors suitable for (without HRC fuse)
(A) 16 Amp. Ea. 1.00
(B) 32 Amp. Ea. 1.00
(C) 63 Amp. Ea. 1.00
Supplying Knife / Blade / DIN type HRC fuse link
69 capable to withstand 80 K.A. confirms to I.S.
for following current capacity
(A) 63 Amp. to 100 Amp.(Size 000 ) Ea. 1.00
(B) 63 Amp to 100 Amp (Size 00) Ea. 1.00
(C) 125 Amp to 160 Amp (Size 00) Ea. 1.00
(D) 100 Amp to 200 Amp (Size 0) Ea. 1.00
(E) 125 Amp to 200 Amp (Size I ) Ea. 1.00
(F) 250 Amp (Size I ) Ea. 1.00
(G)200 Amp to 400 Amp (Size II ) Ea. 1.00
(H)400 Amp to 630 Amp (Size III ) Ea. 1.00
(I) 800 Amp (Size III ) Ea. 1.00
Supplying Bolted Connections (BS type) HRC fuse
70 link capable to withstand 80KA confirms to I.S.
for following current capacity
(A) up to 32 Amp. Ea. 1.00
(B) 36 Amp. to 63 Amp. Ea. 1.00
(C) 80 Amp. to 125 Amp. Ea. 1.00
(D) 126 Amp. to 200 Amp. Ea. 1.00
(E) 250 Amp. to 315 Amp. Ea. 1.00
(F) 400 Amp. to 450 Amp. Ea. 1.00
(G) 500 Amp. to 630 Amp. Ea. 1.00
Insulated Fuse Pulling Handle for Knife / Blade / DIN /
71 Bolted Type HRC Fuse Link from 63 A to 800 A Ea. 1.00
SECTION / EARTH LEAKAGE CIRCUIT BREAKERS
Approved make ELCBs / RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 6 KA and suitable for
operation on single phase 240 V. having characteristic
of quick action & tripping with all advance feature & do
not incorporate any electronic component. for
following Max. rating erected as directed
Cat. I Ea. 1.00
Cat. II Ea. 1.00
Cat. III Ea. 1.00
(ii) 40Amps. DP
Cat. I Ea. 1.00
Cat. II Ea. 1.00
Cat. III Ea. 1.00
(iii) 63 Amps. DP
Cat. I Ea. 1.00
Cat. II Ea. 1.00
Cat. III Ea. 1.00
Approved make ELCBs / RCCBs conforming to IS:
12640 and having sensitivity of 30 mA and Short
Circuit withstand capacity of 6 KA and suitable for
operation on 3 phase and neutral 415V. having
characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic
component for following Max. rating erected as
Cat. I Ea. 1.00
Cat. II Ea. 1.00
Cat. III Ea. 1.00
(ii) 40Amps. FP
Cat. I Ea. 1.00
Cat. II Ea. 1.00
Cat. III Ea. 1.00
(iii) 63 Amps. FP
Cat. I Ea. 1.00
Cat. II Ea. 1.00
Cat. III Ea. 1.00
(iv) 100 Amps. FP (100 mA Sensitivity)
Cat. II Ea. 1.00
Cat. III Ea. 1.00
Supplying & erecting approved make RCCB + MCB
(Electro magnetic type only) working on residual
current device having 6 KA short circuit breaking
capacity and 30 mAmp. Sensitivity & 30 mili sec.
74 tripping time conforming to IS 12640 test knob facility
trip free mechanism operating for rated leakage at
nominal ten volt, complete erected including all
materials lugs screws etc. completed.
[a] 6A / 10A / 16A / 20A / 25A 2 pole single phase
[b] 32A / 40A, 2 pole Single Phase
[c] 63 A, 2 pole Single Phase
[d] 6A to 25 A, 4 Pole Three Phase
[e] 32A to 40 A, 4 Pole Three Phase
[f] 63A, 4 pole Three Phase
Supplying & fixing box for housing ELCB / ELCB +
MCB combination made of 18 SWG sheet steel duly
75 powder coated with gasket, dust & vermin proof
bakelite shield two earthing terminals for following
type of RCCB, ELCB, ELCB + MCB
[a] For 2 pole Ea. 1.00
[b] For 4 Pole Ea. 1.00
SECTION / EARTHING
Providing and erecting required size Aluminium strip
for earthing of H.T. , OCB / ACB / Transformer, LT
panel board, Motors etc. using copper clamp.
Providing and erecting required size HOT deep
Galvanised iron strip for earthing of H.T. , OCB/ ACB/
Transformer LT panel board, Motors etc. using proper
Providing and erecting required size Copper strip for
78 earthing of H.T. OCB / ACB/ Transformer, LT panel Kg. 1.00
board, Motors etc. using copper clamp.
Providing and erecting Annealed bare Copper wire
Providing and erecting HOT deep Galvanised iron
strip wire 8 to 16 SWG.
Pipe type earthing having 150 cms.long and 2.5 cms.
dia. galvanised iron pipe with coupling and buch
buried in specially prepared earth pit complete with
necessary 8 SWG earth wire.
Pipe type earthing with 40 mm dia 2.5 mtr long 'B'
grade G.I. pipe with necessary coupling buch buried in
82 specially prepared earth pit & G.I. earth wire of 8 Ea. 1.00
SWG erected & connected as directed (For panel)
For using salt and charcoal / coke as required for pipe
Add Extra for excavation in Semi hard rock (Murrum)
84 by dry and wet blasting and chiselling for pipe type Ea. 1.00
Add Extra for excavation in Hard rock by dry and wet
blasting and chiselling for pipe type earthing.
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free G.I.Pipes having Outer
pipe dia of 50mm having 80-200 Micron galvanising,
86 Inner pipe dia of 25 mm having 200-250 Micron
galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for
following type of applications.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
(b)For Electrical installation up to 11 KV in normal
Length of Pipe : 2.00 mtrs
Back filling Compound :1 no. Bag of 25 Kg.
(c) For Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation, SCADA)
i.e independent Earthing in normal soil.
Length of Pipe : 3.00 mtrs
Back filling Compound :2 nos Bags of 25 Kg.
Supplying & erecting in earthpit of minimum bore dia.
225mm size ASH or approved make Safe Earthing
Electrode consisting Pipe-in-Pipe Technology as
per IS 3043-1987 made of corrosion free G.I.Pipes
having Outer pipe dia of 80 mm having 80-200
87 Micron galvanising, Inner pipe dia of 40 mm having
200-250 Micron galvanising, connection terminal dia
of 14 mm with constant ohmic value surrounded by
highly conductive compound with high charge
dissipation suitable for following type of applications.
[A] For electrical installation up to 440 V
Length of Pipe - 1 Mtr Ea. 1.00
Back filling compound - 1 Nos. of Bag of 15 Kgs.
[B] For Electrical installation up to 11 KV located in
other than normal soil i.e. Soft Rock, Marshy Soil
-Length of Pipe : 2 mtr
-Back filling Compound :1 no. Bag of 25 Kg.
[C] For Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation,
SCADA)i.e. independent Earthing located in other
than normal soil i.e. Soft Rock, Marshy Soil etc..
-Length of Pipe : 3 Mtrs.
-Back filling Compound :2 nos Bags of 25 Kg.
Providing one bag of 25 Kg. Additional Back Filling
88 Compound (BFC) suitable for safe earthing device. Ea. 1.00
Supplying & erecting funnel type earthing having earth
plate of following size burred in specifically prepared
earth pit 3 mtr. below ground with 40 kg. charcoal and
salt with alternate layers of charcoal & salt, 20mm.dia.
G.I. pipe with Funnel with a wire mesh for watering &
bricks masonry block, C.I. Cover complete as per
para 7.3 of IS 3043 with necessary length of double
Galvanised Iron / copper earth wire No 6 SWG bolted
with lug to the plate and covered in 12 mm dia. G.I.
pipe 2.5 mtr long complete connected to the nearest
switch gear with end socket as per direction & duly
tested by earth tester confirming to IS (As per
drawing) with following specification
(A) With 30 x 30 x 0.35 cms: C.I. earth plate Ea. 1.00
(B) With 45 x 45 x 0.35 cms. C.I. earth plate Ea. 1.00
(C) with 60 x 60x 0.315 cms. Copper earth Plate Ea. 1.00
ADD Extra for excavation in Semi hard rock (Murrum)
90 by dry and wet blasting and chiselling for funnel type Ea. 1.00
earthing of above
ADD Extra for excavation in Hard rock by dry and wet
91 blasting and chiselling for funnel type earthing of Ea. 1.00
Cast iron earth plate size 30 X 30 X 0.35 cms. buried
in specially prepared 2.5 Mtr. deep earth pit complete
92 with necessary G.I. strip in G.I. pipe 2 Mtr. long with Ea. 1.00
coupling and G.I. plug for earthing of switch gear,
conduit run or power plug etc.
Cast iron earth plate size 45 X 45 X 0.35 cms.
buried in specially prepared 2.5 Mtr. Deep earth Pit
complete with necessary G.I. strip in G.I. pipe 2 Mtr.
long with coupling and G.I. plug for earthing of switch
gear, conduit run or power plug etc.
SECTION 12-1 / REPAIRING OF MONO BLOCK PUMP MOTORS
Removing the pump set from foundation after
removing suction & discharge connection pipes & all
wiring connections taking it to workshop & open it for
fault finding , refitting the same, after carrying out
repairing, taking back on site refitting on foundation
with pipe & wiring connections & put in working
condition. (Excludes cost of repairing. Includes to &
from transportation)
(a) Up to 3 HP Job 1.00
(b) Above 3 HP to 7.5 HP Job 1.00
(c) 10 Hp to 20 HP Job 1.00
Removing deteriorated gasket, gland packing, washer
nuts & bolts before refitting of motor pump set.
(b) Above 3 HP to 7.5 HP Ea. 1.00
Rewinding of 230V single phase motor as per original
winding design by using super enamelled copper Wire
and putting the same in working condition as per
(B) Upton 0.75 HP Ea. 1.00
(C) Upton 1.0 HP Ea. 1.00
Rewinding of 3 phase 440V motor as per original
winding design by using super enamelled copper Wire
and putting the same in working condition as per
Rewinding of 3 H.P., 3 phase 440V motor as per
original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 5 H.P., 3 phase 440V motor as per
original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 7.5 H.P., 3 phase 440V motor as per
original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 10 H.P., 3 phase 440V motor as per
original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 12.5 H.P., 3 phase 440V motor as per
original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 15 H.P., 3 phase 440V motor as per
original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 20 H.P., 3 phase 440V motor as per
original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Replacing burnout unserviceable ball bearing /roller
105 bearing suitable for following motors for mono block
(A) For 1 H.P. motor/pump Ea. 1.00
(B) For 2 H.P. motor/pump Ea. 1.00
(C) For 3 H.P. motor/pump Ea. 1.00
(D) For 5 H.P. motor/pump Ea. 1.00
(E) For 7.5 H.P. motor/pump Ea. 1.00
(F) For 10/12.5 H.P. motor/pump Ea. 1.00
(G) For 15 H.P. motor/pump Ea. 1.00
(H) For 20 H.P. motor/pump Ea. 1.00
REPAIRING OF OPEN WELL HORIZONTAL MONO PUMP SETS
Dewatering sump well by hiring pump sets &
106 temporary pipe connections of following sump
(a) up to 5000 Ltr Job 1.00
(b) Above 5000 Ltr to 20000 Ltr Job 1.00
(c) Above 20000 Ltr to 1 Lac Ltr Job 1.00
(d) Above 1 Lac Ltr Job 1.00
Opening the open well sub. mono pump set for fault
finding , carry out required repairs refitting the same
with necessary oiling, greasing & overhauling &
making pump set in good working condition.
(Excludes cost of repairing. Includes to & from
transportation)
(iii) Above 15HP Ea. 1.00
Rewinding single phase 230V motor for open well
horizontal mono pump set by using polycab copper
winding wire & putting the same in working order for
pump capacity of
Rewinding 3 phase, 440V motor for open well
horizontal mono pump set by using poly. cap copper
winding wire & putting the same in working order for
pump capacity of
Replacement of S.S. sleeves for shaft of open well
horizontal submersible pump sets for
(iii) Above 15HP Ea. 1.00
Replacement of Stainless Steel bushing fitted in end
shield for open well horizontal submersible pump set
(iii) above 15 HP Ea. 1.00
Replacement of Gun metal /Bronze bushing for open
well horizontal submersible pump set
(iii) above 15 HP Ea. 1.00
Replacing gasket, oil, nuts, bolts & washers for open
well horizontal submersible pump sets.
(iii) above 15 HP Ea. 1.00
Replacement of Bronze / Carbon thrust bearing with
114 fibber plate & bushing suitable for open well horizontal
submersible pump set for
(iii) above 15 HP Ea. 1.00
Replacement of cast iron impeller for openwell
horizontal submersible pump pump sets
(iii) above 15 HP Ea. 1.00
Replacement of Bronze / Gunmetal impeller for open
well horizontal submersible pump set
(iii) above 15 HP Ea. 1.00
Rewinding of 25 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 30 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 35 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 40 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 50 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 60 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 80 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 100 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.(RA)
Rewinding of 150 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 220 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
Rewinding of 268 H.P., 3 phase 440V motor rotor as
per original winding design by using super enamelled
copper Wire and putting the same in working condition
as per original.
128. Materials Section
A Motor coupling. No. 1.00
B Motor Oil Seal Set 1.00
C Sand Guard No. 1.00
D Motor Stud & Nut No. 1.00
E Motor rotor blazing Job. 1.00
F Connecting piece with couple key. Job. 1.00
G Drain plug No. 1.00
H Motor Base Complete Job. 1.00
Motor rotor through machining and varnishing etc.
I complete Job. 1.00
J Motor cable guard mm 1.00
K Replacement Stud nut No. 1.00
L Pump NRV No. 1.00
M Sand Guard No. 1.00
N Pump L&Key bolt / lock No. 1.00
O Pump shaft couple No. 1.00
P Stud and nut SS No. 1.00
Pump opening servicing fitting etc. labour charge
R K-type Job. 1.00
S Q type Job. 1.00
Pump Set compleet per stage SS
T per stage 1.00
Pump Set compleet per stage GM
U per stage 1.00
V V-4 Signle phase sub pums section Case No. 1.00
W V-4 Signle phase sub pums section Bush No. 1.00
X V-4 Signle phase sub pum Couple No. 1.00
Y V-4 Signle phase sub pum Bowl No. 1.00
Z V-4 Signle phase sub pum Bowl (Lubi) No. 1.00
AA V-4 Signle phase sub pum Bush No. 1.00
AB V-4 Signle phase sub pum bush lubi No. 1.00
AC V-4 Signle phase sub pum slive No. 1.00
AD V-4 Signle phase sub pump Support SS No. 1.00
V-4 Signle phase sub pump Pipe SS
AE per stage 1.00
V-4 Signle phase sub pump Lath work Labour
AF per stage 1.00
AG Sub Pump Connection Cable 2.5 mm Rmt. 1.00
AH Sub Pump Connection Cable 4 mm Rmt. 1.00
AI NVC Up to 2 HP Motor Startor No. 1.00
AJ NVC Up to 7.5 HP Motor Startor No. 1.00
AK NVC Up to 20 HP Motor Startor No. 1.00
AL NVC Up to 30 HP Motor Startor No. 1.00
AM Relay Unit MK-1 No. 1.00
AN Relay Unit ML-2 No. 1.00
AO Relay Unit ML-3 No. 1.00
AP Relay Unit ML-4 No. 1.00
AQ Contact Kit MK-1 No. 1.00
AR Contact Kit ML-2 No. 1.00
AS Moving Patti No. 1.00
AT Volte Meter No. 1.00
AU Ampier Meter No. 1.00
AV Volte Meter Gard No. 1.00
AW Ampier Meter Gard No. 1.00
AX Push Button Square No. 1.00
AY Starting Button No. 1.00
AZ Moving Contect Bridge Up to 2 HP Motor Startor No. 1.00
BA Moving Contect Bridge Up to7.5 HP Motor Startor No. 1.00
BB Moving Contect Bridge Up to 20 HP Motor Startor No. 1.00
BC Moving Contect Bridge Up to 30 HP Motor Startor No. 1.00
BD Fix Contect Bridge Up to 2 HP Motor Startor No. 1.00
BE Fix Contect Bridge Up to7.5 HP Motor Startor No. 1.00
BF Fix Contect Bridge Up to 20 HP Motor Startor No. 1.00
BH Fix Contect Bridge Up to 30 HP Motor Startor No. 1.00
BI 1-Phase Starting Capacitor No. 1.00
BJ 36 MFD capacitor No. 1.00
BK 32 A Connector No. 1.00
BL 63 A Connector No. 1.00
Verticle Turbine Pump At Anandpur Dem
1 Pump Housing SS No. 1.00
2 Pump Full Fitting Labour work No. 1.00
3 Pump main shaft 2620 X 47mm No. 1.00
4 G Support Brass Bushing No. 1.00
5 Pump Bottom long bush GM No. 1.00
6 Section SS Sleeve short No. 1.00
7 Section SS Sleeve long No. 1.00
8 Section PU bushing No. 1.00
9 Fasteners Kg 1.00
10 Packing kits Set 1.00
11 Pump glan housing Set 1.00
12 Bearing No.6824 SKF No. 1.00
13 Bearing No.29322E SKF No. 1.00
14 Gland Dori No. 1.00
15 Sheet No. 1.00
16 Tube No. 1.00
17 Nut Bolt (12 X 50) High Quality No. 1.00
18 Coupler No. 1.00
19 Couple Bush No. 1.00
20 Bolt (22 X 75) High Quality No. 1.00
21 Bolt (16 X 75) High Quality No. 1.00
22 Nut, Bolt, Vicer (20 X 75) No. 1.00
23 Gland No. 1.00
24 Gland Collar No. 1.00
25 Shafting Machining (Through) No. 1.00
26 Pump Housing Dismantling through Hydraulic No. 1.00
27 S.S. Nipple for Hdpe pipe incl. fitting, labour,etc.
28 Chapdo suitable for;
29 S.S. Pump jari
30 Suitable For V4 pump. No. 1.00
31 Suitable For V6 pump. No. 1.00
32 T Bolt for submercible pump. No. 1.00
34 Suitable For V4 pump No. 1.00
35 Suitable For V6 pump incl; double door No. 1.00
36 S.S. nipple 12 inch
37 Flange pair (HM8Mf) No. 1.00
38 V4 Pump repairing labour per stage No. 1.00
39 V6 pump repairing labour per stage No. 1.00
40 V4 pump ampular( rotter) per unit No. 1.00
41 V8 pump ampular (rotter) per unit No. 1.00
42 V8 Pump bowl per unit No. 1.00
43 Foot valve/ non return valve per unit No. 1.00
44 mibil oil No. 1.00
Lifting work of single phase submersible pump
machionary from bore with unloading different size
130 pipes, starter, cable from bore site of junagadh Ea. 1.00
municipal corporation & loading to water works store /
ware house (with cleaning site if necessary)
Lowering work of single submersible pump
machionary in bore with loading different size pipes,
131 starter, cable from water works store/ ware house & Ea. 1.00
unloading at bore site of junagadh municipal
corporation area. (with cleaning site if necessary)
Lifting work of three phase submersible pump
machionary from bore with unloading different size
132 pipes, starter, cable from bore site of junagadh Ea. 1.00
municipal corporation & loading to water works store /
ware house (with cleaning site if necessary)
Lowering work of three submersible pump machionary
in bore with loading different size pipes, starter, cable
133 from water works store/ ware house & unloading at Ea. 1.00
bore site of junagadh municipal corporation area. (with
cleaning site if necessary)
Lifting work of Three phase sub-pump from well with
unloading different size pipes, starter, cable from bore
134 site of junagadh municipal corporation & loading to Ea. 1.00
water works store / ware house (with cleaning site if
Lowering work of Three phase sub-pump in well with
loading different size pipes, starter, cable from water
135 works store/ ware house & unloading at bore site of Ea. 1.00
junagadh municipal corporation area. (with cleaning
site if necessary)
Lifting work of unsafe(O;FI[,) single phase sub-pump/
Handpump from bore/well and unloading pipes, saliya,
starter, cable to water works store room/ ware house.
(with cleaning site if necessary)
Lifting work of unsafe(O;FI[,) Three phase sub-pump
to bore/well with unloading different size pipes,
137 starter, cable from bore/well site of junagadh Job. 1.00
municipal corporation & loading to water works store /
ware house. (with cleaning site if necessary)
Loading/Un Loading of Heavy pump set as following
lowering and lifting deepwel for water works branch
139 as per req. Job. 1.00
lowering and lifting with reparing deepwel for water
140 works branch as per req. Job. 1.00
Motor Pump CI type pin bush Couple joto
Opening the submersible pump set for fault finding
carry out required repairs refitting the same with
142 necessary oiling, greasing & overhauling & making
pump set in good working condition. (Excludes cost of
repairing. Includes to & from transportation)
(iii) 20HP to 35 HP Ea. 1.00
(iv) Above 35 HP Ea. 1.00
Rewinding of submersible motor by using approved
make PVC insulated copper winding Cores of suitable
143 size complete with connection. Capacity Suitable for
pump of following size. Dismantled Materials to be
retained by agency.
Replacement of bronze/ carbon thrust bearing with
fibre plate & housing for
(i) 150 mm. dia. Ea. 1.00
(ii) 200 mm. dia. Ea. 1.00
(i)150 mm. dia. Ea. 1.00
(ii)200 mm. dia Ea. 1.00
(i) 150 mm. dia. Ea. 1.00
(ii) 200 mm. dia. Ea. 1.00
145 Replacement of stage casing bowl with nuts and bolts.
(i)150 mm. dia. Ea. 1.00
(ii)200 mm. dia Ea. 1.00
(i) 150 mm. dia. Ea. 1.00
(ii) 200 mm. dia. Ea. 1.00
146 Replacement of Bronze impeller with neck ring.
(i) 150 mm. dia. Ea. 1.00
(ii) 200 mm. dia. Ea. 1.00
147 Replacement of Shaft sleeve stainless steel.
(i) 150 mm. dia. Ea. 1.00
(ii) 200 mm. dia. Ea. 1.00
148 Replacement of Bowl bearing/ bush
(i)150 mm. dia. Ea. 1.00
(ii)200 mm. dia Ea. 1.00
(i) 150 mm. dia. Ea. 1.00
(ii) 200 mm. dia. Ea. 1.00
149 Replacement of S.S.Shaft for
(A) 3 stage pump
(i)150 mm. dia. Ea. 1.00
(ii)200 mm. dia Ea. 1.00
(B) Add per stage
(i) 150 mm. dia. Ea. 1.00
(ii) 200 mm. dia. Ea. 1.00
150 Replacement of suction strainer
(i)150 mm. dia. Ea. 1.00
(ii)200 mm dia. Ea. 1.00
Supplying and erecting Direct - On - Line Starter with
18 A. rating contactor and with 3.5 Amp. 18A range
directly operated in totally insulated elegant enclosure
for single phase operation up to 3 HP as per IS
complete erected on P.W. Block with necessary
SUBMERSIBLE PUMPS
Supplying of single phase submersible pump set
suitable for 100 mm size or more dia bore well having
motor capacity and discharge as under with necessary
(a) Motor rating 1 HP (12 stage) pump having capacity
of 50 LPM at 43 to 45 mtr head suitable for 32 mm
dia. delivery pipe
Cat.II Ea. 1.00
(b) Motor rating 1.5 HP (16 stage) pump having
capacity of 50 LPM at 60 mtr head suitable for 32 mm
dia. delivery pipe
Cat.II Ea. 1.00
Design, Supplying, installing, testing of factory
fabricated ready made Three phase APFC Panel
Cubical Panel fabrication should be type tested as per
IEC 61921, 61439:1&2 Capacitor Duty Contactor for
switching as per following Steps Incomer Switch of
MCCB type Icu=Ics=50KA at 400/440 Volts, with OC,
SC, internal earth fault protection Incomer Switch of
MCCB type Icu=Ics=50KA at 400/440 Volts, with OC,
SC, internal earth fault protection,Copper tinned
insulated Busbar,Cubical panel should be indoor type
with IP 43 and IK 10,Metalized polypropylene film tye3-
phase 550Volt Capacitor,De tuning Reactor for each
capacitor,Panel having Short Circuit and Overload
protection,Each step Capacitor having suitable MCB
with Sc, OL, internal earth fault relay,Each stage
having Stage Contactor (Capacitor load rating),PF
regulator master controller having suitable steps with
LCD display, Rs 485 Communication port, Indication
LED Lamps for main incomer and ON-OFF for each
capacitor bank,MS Chanel for Floor mounting, Cable
entry as per site situation,Cooling fans for panel
(A)50KVAR Ea. 1.00
(B)75KVAR Ea. 1.00
(C)100KVAR Ea. 1.00
(D)125KVAR Ea. 1.00
(E)150KVAR Ea. 1.00
(f)200KVAR Ea. 1.00
(g)250KVAR Ea. 1.00
Supply at Site, Storage , Erection, Installation, Testing
& Commissioning of LV MCC Panel with of
160 KW (01 Incomer and 03 Outgoing
Feeders) of LV MCC Panel totally enclosed,
dust & bermin proof, indoor type, minimum
degree of protection - IP 52 as per IS:
operation on 3-Phase, 4 Wire, 415V, 50Hz,
Neutral effectively grounded, with
instrumentation compartments accomodating
LED type indicating lamps, control contactors
as per IS: 13947, CT of accuracy class- I as
per IS: 2705, relays, meters & control MCBs,
air insulated electrolitic grade Aluminum bus
154 bar for three phase & neutral system with
incomming breaker-1000Amp.
microprocessor based Air Circuit
Breakers (electrically operated drawout
type)/ air break fixed type MCCB with trip
free mechanism, current limiting type as per
IS: 8828, Motor Contractor (as per type -2
coordination), Overload Relay with built-in
single phasing prevention feature & auxiliary
feeders as per SLD drawings, momentary
contact type push buttons, equipment
fittings, bus bars, cable boxes, cable gland,
incoming & ougoing cable connection for
1100V grade, Aluminium/ Copper conductor
Microprocessor based Soft Starter with built-in by
pass contactor, Semi conductor Fuses, Harmonic
Filters, cast resin type CT, Digital MFM, Analogue
Ammeter & minimum 10 Channel Temperature
Scanner with RS 485 communication port Rate as per
mech Sor 2022-23 item 41 41.2-f page no.73
Supply, installation, testing & commissioning of 415 V
Fully automatic Microprocessor based soft starter with
built in bypass arrangement for pump control
application as per general specification as
under:Control Method -Torque Control, Input voltage-
415 V, 3 Phase, Input frequency - 50/ 60 Hz (± 5%),
155 Confirmative to standard - IEC 61947-4- 2UL, CSA,
CE, Motor protection - inbuilt Thermal Protection,
Starter protection - SC UV, Phase unbalance, Phase
failure, EMC Std- IEC 61000-4-2 Level- 3 & IEC
61000-4-3-Level-3, Built in communication as per RS
485.Rate as per mech Sor 2022-23 item no 22-22.1-
item for handpump reaparing
ITEM DESCERIPTION Unit Rate
1 Handpump repairing including all type of Each
Dimolition cost,driver,
work diesel, labour
of Handpump cost etc..as
Foundation Auta Job
C.C. and R.C.C. Job
including excavation and Labour cost required
etc. for repairing handpump (L.S)
3 Handpump Foundation Auta repairing job / new Each
auta work including excavation and conctrete Job
plaster and masonary work with drainage Outler
Supplying All Marked
type material and All
(Embossed) type of size
following Labour cost
duty “C” Class G.I .
Pipe with couplings as per reuired & erecting as directed by
Engineer-in-charge with necessary plumbing as desired.
(B) 32 mm dia 1 Mtr.
5 Handpump Parts (India Mark-II) Heavy
Head With Cover 1 No.
Handle Only 1 No.
Handle Complete 1 No.
Front Cover 1 No.
Extra Plate 1 No.
Water Tank 1 No.
Stand Normal 1 No.
Stand Telescope 1 No.
6 Handpump & Cylinder Parts (India Mark-II) Heavy
Excel (SS) 1 No.
Cylinder Welded Rod 1 No.
Upper Flower (1.2 Kg GM) 1 No.
Lower Flower 1 No.
CI Set (0.8 Kg CI) 1 No.
Upper valve (0.15 Kg Brass) 1 No.
lower valve (0.2 Kg Brass) 1 No.
Cylinder Body (5.4 Kg BR. Liner) 1 No.
Cylinder Nut 1 No.
Slive S.S. (0.3 Kg Brass) 1 No.
Leather Washer (Shakti ) 1 No.
Rubber Washer Kit 1 No.
Rubber Washer (42 mm) 1 No.
Rubber Ring Big 1 No.
Rubber Tikdi Big 1 No.
Rubber Ring small 1 No.
Nut & Bolt 1 No.
Rod Nut 12 mm" x 12 mm" 1 No.
Brass Footvalve 1.1/4" 1 No.
Tools Kit for installation special (3 Lifter ISI) 1 No.
Tools kit for Pipe wise 1 No.
Tools Kit for rod wise (Medium) 1 No.
Tools kit for lifter (Medium) 1 No.
7 Prividing and supplying Hand pump cylinder SS. Body
8 Prividing and supplyingHand pump break bite saliya.
road cuplin 1 No.
9 Prividing and supplying general item for dipwell and
1.25" vicer 1 No.
2.5 " vicer 1 No.
upper valve 1 No.
lower valve 1 No.
flvar upar na complet 1 No.
cyylinder nut 1 No.
dabba danki pin shafteen 1 No.
dabba danki set with cylinder 1 No.
dipwell glan 1 No.
chapla (dipwell rod pakadvana) 1 No.
bering 6204 1 No.
bering 6205 1 No.
mibil oil 1 No.
dabba danki chain 1 No.
oil for dipwel 1 No.
handpump na hata 1 No.
handpump water tank 1 No.
foundation stand 1 No.
Labour charges for removing existing old handpump,
submersible pump / deep well & Fixing of handpump
with all the connecting road, GI pipes with all related
materials from Water works branch's store room / ware
10 house/ as per instructed location to the required location Per Job
including all type of transporation charges..etc complete.
& deposit all the scrap materials / related materials to
water works store room.
11 Labour charges for Welding work required in Per Job
reparing of handpump as per required
12 Labour charges for Removing of existing trapped
handpump along with GI pipes, rods, couplings,
etc….complete and trasport to water works store 1 No.
room. Ware house or as per directed by Einginner In
13 Labour charges for Taking up the foundation of hanpump 1 No.
above from ground level with rquired excavation/digging,
demolition of existing auta, constrcting new auta with
required pipe with complete fittings.
Any extra required Electrical Items not included above
Schedule-B Electrical latest S.O.R.
Extra Note:- G.S.T. will be paid as per used S.O.R. and its OR
Item terms and condition for the G.S.T. If the rate is GWSSB Electro-
including the G.S.T. then such tax will be not paid Mechanical latest
additionally, else such tax will be paid additionally
Say Total Tender Amount Rs. (Excluding G.S.T.) 7500000+GST
I / WE AM/ARE WILLING TO CARRY OUT OF WORK AT…………………….………….% ABOVE / BELOWE
……………………….………% (SHOULD BE WRITTEN IN FIGURE AND WORDS) BELOW / ABOVE THE
ESTIMATED RATES MENTIONED ABOVE.
AMOUNT OF MY / OUR TENDER WORKS OUT AS UNDER :-
ESTIMATED AMOUNT PUT TO TENDER : (ABOVE)
ESTIMATED AMOUNT PUT TO TENDER : (BELOW)
[1] All work shall be carried out as per specification or in case of diversion, as directed by E-I-C.
[2] Rate quoted includes clearance of site ( Prior to commencement of work and its closed) in all
[3] respects and held
The contractor gross
shall for under
exhibits all as
a board condition sitecircular
per Govt. moistureNo.weathers etc./ 1657 N Dt. 26-01-73 with
One of specification
percent and details
of bill Amount of work
for subject workand amount
shall involvedfrom
be recovered at site
contractany paymentas
[5] Labour cessmaterial
Necessary " in terms of Gujarat
testing Govt.Gazette
& certificates will beextra
done & ordinary dated
produced 12/12/2004atimplementations
by contractors its own cost. of
[6] On the event of time laps necessary penalty shall be charged & recovered by the authority without
[7] anyallprior
At time,intimation, though
as directed if genuine reasons Written
by Engineer-in-charge. will be produced
progress, /certificates
existing, the decisions
which ever willbebeleft
demanded by the authority shall be bound to the tenderer without any objection.
Signature of Contractor's
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
EM and Hand Pump Maintanance tender.pdf
SCH-B EM and Handpump maintanance.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .