Modernization of President and Vice President Chambers including Interior Furnishing, Wall Panelling, False Ceiling and Allied Works at Nagar Seva Sadan Tharad. Dist. Vav -Tharad Grant: - SJMMSVY-UDP-88- 2026-27

No. But may be estimated

more or less In Figure in Words quantities

A Building

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of Rupees One Hundred TwentyTwo Paise

unserviceable materials with all lead and lift.(ii) In Cement NinetyFour Only

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Super

Rupees Four Thousand Five Hundred

2.0 8.00 structure above plint level up to two level in Cement 4538.16 Cu.M

ThirtyEight Paise Sixteen Only

Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional @

First Floor

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos Rupees Seven Hundred Fifty Paise

of 6mm Mild steel round bars after every three course SeventySix Only

embedded in Cement Mortar in sup

Providing 15mm thick plaster in on brick / concrete wall for

Rupees Two Hundred Seven Paise SixtyThree

4.0 92.00 interior plastering mala finished even and smooth (i) 207.63 Sq.Mt

Cement Mortar 1:3 ( 1 Cement : 3 sand) @ First Floor

Providing and fixing extruded aluminum window having

extruded aluminum Colour anodized section frame main

outer size 127mm x 38.10mm x 1.35mm (of Jindal Section Rupees Two Thousand One Hundred Fourty

no:2443,@ Wt.1.384 Kg/mt),horizontal Four track member Paise ThirtyThree Only

size 122.20mm x 31.75mm x 1.10mm (of Ji

P & L Mirror polished Green Marble Stone slab 20 mm

(Average) thick for stair steps and riser as per design incl.

Rupees Two Thousand Seven Hundred Seven

6.0 9.00 full moulded round front edge in trade of steps laid on 20 2707.81 Sq.Mt

Paise EightyOne Only

mm thick cement mortar 1:6 ( 1 Cement :6 coarse sand )

jointed with grey cement sl

Providing and fixing Safety grills of required pattern for

windows / Door using 16mm dia M.S plished bars and

Rupees One Hundred Twelve Paise

7.0 270.00 Rectangular CRC pipes of size 50 x 30 x 2mm at required 112.72 K.g

SeventyTwo Only

spacing as per design and hold fasting with coach bolts

including one coat of primer and

Pro. And fixing single layer water proof gypsum board

mm thick sections using water proof board of size

mm x 1830 mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with intermediate channel

og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to

center ceiling section of size 40 mm x 35 mm x 0.55 mm at

8.0 78.00 457 mm c/c and perimeter channel A of size 20 mm x 27 606.95 Rupees Six Hundred Six Paise NinetyFive Only Sq.Mt

mm x 30 mm x 0.5 mm at edges & drops incl.paper tap

sand sofit cleat, anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per

detail drawing as directed

Providing and applying approved imported pattern interior

spray texture plaster finish of required shade and design

using polymer modified acrylic/cement based texture

material by mechanical spray pump/hopper system over

properly prepared surface including cleaning, surface

Rupees One Thousand One Hundred SixtyOne

9.0 41.00 preparation, primer coat, bonding agent, machine spray 1161.50 Sq.Mts

Paise Fifty Only

application, pattern development, levelling, edge finishing,

curing, scaffolding, compressor/pump equipment, labour,

tools & plants, protective coating and all leads & lifts

complete as directed by Engineer-in-Charge.

Providing, fabricating and fixing wall panelling work using

19 mm thick BWP grade plywood framework with 6 mm

backing wherever required, finished with 1.0 mm thick

decorative laminate of approved shade and make on

exposed surfaces and balancing laminate on internal

surfaces, including 2 mm PVC edge banding, necessary

10.0 28.00 10605.00 Rupees Ten Thousand Six Hundred Five Only Sq.Mts

wooden battens / MS support wherever required, screws,

adhesives, nails, cutting, fabrication, edge finishing,

polishing, transportation, loading and unloading, handling,

fixing at site, scaffolding (if required), wastage, all labour,

tools and plants, complete in all respects as per drawings,

specification and direction of Engineer-in-Charge.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

11.0 147.00 give an even shade including thoroughly brushing the 40.59 Rupees Fourty Paise FiftyNine Only Sq.Mts

surface free from mortar dropping and other foreign matter

and sand papered smooth

B Furniture

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

It. Estimated (in Rs.) according to

Description of Item Unit

No. But may be estimated

more or less In Figure in Words quantities

Providing and Supplying High Back Executive President

Chair with ergonomic design, cushioned seat and back,

premium upholstery (leather/fabric), adjustable height

Rupees TwentyFour Thousand Seven Hundred

12.0 2.00 mechanism, synchro tilt, fixed/adjustable armrests, heavy- 24745.00 Each

FourtyFive Only

duty chrome/nylon base with castor wheels, complete in all

respects as approved by the Engineer-in-Charge.

Providing and Supplying Visitor Chair with upholstered

seat and back, ergonomic design, powder-coated/MS

tubular frame or chrome finish frame, cushioned armrests

12.0 8.00 5050.00 Rupees Five Thousand Fifty Only Each

(if applicable), durable fabric/leatherette upholstery,

complete in all respects as approved by the Engineer-in-

Providing and Supplying 3-Seater Sofa with kiln-seasoned

hardwood/internal frame, high-density foam cushioning,

premium fabric/leatherette upholstery, ergonomic back

Rupees TwentyFive Thousand Two Hundred

12.0 2.00 support, polished legs/base, including all fittings, 25250.00 Each

Fifty Only

accessories, transportation, loading, unloading and

installation complete as approved by the Engineer-in-

Providing and Supplying Round Glass Meeting Table with

toughened clear glass top (minimum 12 mm thick),

decorative edge finish, heavy-duty powder-coated Rupees Fifteen Thousand One Hundred Fifty

MS/chrome-finished base, complete with all fittings, Only

hardware, transportation, loading, unloading and

installation as approved by the Engineer-in-Charge.

Providing and Fixing 12 mm Thick Toughened Glass Door

made from clear toughened safety glass, including

premium grade SS 304 hardware comprising floor spring,

12.0 5.00 patch fittings, D-handle, top & bottom pivots, lock 7070.00 Rupees Seven Thousand Seventy Only Sq.Mts

arrangement, rubber gaskets, necessary fixtures and

fasteners, complete in all respects as approved by the

Engineer-in-Charge.

Providing and Fixing Roller Blind / Curtain System of

approved design, colour and texture, made from high-

quality blackout/sunscreen fabric, including aluminium

Rupees One Thousand Five Hundred Fifteen

12.0 23.00 powder-coated head rail, operating mechanism, brackets, 1515.00 Sq.Mts

accessories, fittings, labour, transportation and installation

complete as approved by the Engineer-in-Charge.

C Electric

Rep old and U/S by new Point wiring for Light / Bell with

2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth

Rupees Five Hundred ThirtyNine Paise

13.0 10.00 continuity of following type, erected on PVC / Metallic box, 539.34 Pts.

ThirtyFour Only

single mounting base frame covered with textured/metallic

front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid

PVC pipe and accessories Cat.III

Providing new Point wiring for FAN with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in /

flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic

fan regulator with separately mounted and accessories Rupees Seven Hundred SixtyFive Paise

with earth continuity of following type erected on PVC / FiftyEight Only

Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid

PVC pipe and accessories Cat.III

Providing New Point wiring for Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

15.0 4.00 Metallic box, single mounting base frame covered with 309.06 Rupees Three Hundred Nine Paise Six Only Pts.

textured / metallic front plate modules erected on / in wall

/ ceiling with following type accessories Cat.III

Providing & erecting Switch board for Computer or

electric apparatus consisting of following items in single

board erected on PVC / Metal board with 3 mm thick PC

(Polycarbonate) / Acrylic sheet erected as directed

Rupees One Thousand One Hundred

16.0 2.00 1 no. 6A/16A universal plug-switch combined. 1133.22 Ea.

ThirtyThree Paise TwentyTwo Only

4 nos. 6A Switch

4 nos. 6A 5 pin Plug [B] For Modular Type Accessories

Quantity Estimated Rate Total Amount

Quantity Estimated Rate Total Amount

It. Estimated (in Rs.) according to

Description of Item Unit

No. But may be estimated

more or less In Figure in Words quantities

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

Rupees One Thousand Seven Hundred

17.0 10.00 LED driver efficiency > 85 % 1794.77 Ea.

NinetyFour Paise SeventySeven Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.) (B) LED Panel Light

with provision for Plane front frame with translucent cover

fixed to housing complete.IP20 (vi) 36 watts, 24" x 24",

Surge- 2KV Cat-lll

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Rupees One Thousand Nine Hundred

having 3blades with aluminium blades with , canopy & 30 FourtyEight Paise TwentyNine Only

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

19.0 2.00 108.07 Rupees One Hundred Eight Paise Seven Only Ea.

complete with necessary 24/ O.20, 3 core flexible wire with

Providing Fan clamp of 30 x 5 mm flat of required length &

20.0 2.00 10 mm M.S. Bolt & Nuts erected with necessary hook of 10 98.98 Rupees NinetyEight Paise NinetyEight Only Ea.

mm M.S. Round Bar.

Providing and erecting Inverter based approved make split

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper Rupees SixtyOne Thousand Nine Hundred

insulated copper tubing,drain PVC pipes suitable for ( cost EightyNine Paise SeventySix Only

includes Eco Friendly green gas charging and 15A plug top

& Remote Control & MS Stand) with necessary core

cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (C)

for 1.7 to 2 ton capacity - Premium Cat.

In Words Rupees Nine Lakh FourtyThree Thousand Four Hundred FiftySix Paise NinetyNine Only

I/We am/are willing to carry out the work at ………………………………………………………………………% above/below

Percent (should be written in figures and words ) of the estimated rates mentioned above. Amount of my/our tender works out as under:-

* Estimated amount * Estimated amount

Put to tender................................... Rs. ………………….. Put to tender......................................... Rs. …………………..

Deduct : ............................% below Rs. ………………….. Add ……............................... % above Rs. …………………

Net.................................................. Rs. ………………….. Total ...................................................... Rs. …………………

In words ………………………………………….............................................................

In words …………………………………………........................................................................

* (Please strike out whicheve is not applicable).

Note 1- All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

Note 2- All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

Note 3- Rates quoted include clearance of site (prior commencement of work and at itscolose) in all respects and hold good for work under all conditions, site, moisture,

weather etc.

Note 4- To be continued on additional sheets, if found necessary.

Note 5- GST at 18% will be charged on the bill generated.

Chief Officer

Nagarpalika Tharad