Const. of Community Hall at Paragatisil Jana Mancha No. 1 Kalaigaon under Chengapathar VCDC in Udalguri District. (TN_78_1_R)

Amount

2.8 Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) etc. 2.8.1 All kinds of soil.

11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mortar incl. etc.

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 4.1.5. In prop. 1:3:6 aggregate 20mm nominal size

5.22 Steel reinforcement for R.C.C. works including straightening, cutting, bending, placing in position and binding all complete. 5.22.4 Hot rolled deformed bars

5.9 centering and shuttering including strutting, propping etc and removal of form for: 5.9.1 Foundations, footings, bases of columns etc for mass concrete.

5.9.6 mass Column, Pillars, Piers, Abutments, Post & Struts.

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.

5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All works up to plinth level. 5.1.2 1:1.5:3 aggregate 20mm nominal size.

5.2 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, etc excluding the cost of centering, shuttering, finishing and reinforcement- All works up to plinth level. 5.2.2 1:1.5:3 aggregate 20mm nominal size.

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in. 6.1.1 Cement mortar 1:4

2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

10.16 Steel work in built up tubular (round, square, or rectangular hollow tubes etc) trusses etc, including cutting, hosting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes. 60 mm x 40mm x 3.2mm thick Rectangular iron Pipes.

12.1 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or I hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers etc. 12.1.3 0.63 mm thick with zinc coating not less than 275gm/ m2.

12.4 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or I hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers etc 12.4.2 0.63 mm thick with zinc coating not less than 275gm/m2

13.2 15 mm cement plaster on the rough side of single or half brick wall of mix: 13.2.1 1:4 (1 cement : 4 fine sand).

11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 finished with a floating coat of neat cement. 11.6.1 18 mm thick.

13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on new wall surface. 13.43.1 water thinnable cement primer.

13.44 Finishing wall with water proofing cement paint of required shade: 13.44.1 New work (Two or more coats applied @ 3.84kg/10sqm).

2.25(a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

MADAN DEBNATH