Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹53.8 L+₹7.2 L (15.5%)Rejected-AOC KATTUPADATH H AZHEEKAL PO VYPEEN 682508 | KOCHI | ERNAKULAM | KERALA | 682508 | L2 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | MS BUILDERS L2 | AMRITH ENGINEERS L1 |
|---|---|---|---|---|---|
| 1.00 | M&L for preparing of old steel surfaces of any description over 10 cm in width or girth not otherwise described including removing old paint by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth and applying 2 coats of anti-corrosive epoxy paint over a coat of epoxy primer at any height all as specified including all necessary scaffolding work upto 36m height & complete all as specified and directed | 100 | Sqm | 150 ₹15,000 | 95 ₹9,500 Lowest |
| 2.00 | Dismantling wrought iron or mild steel work of any description complete all as specified | 100 | Qtl | 450 ₹45,000 | 50 ₹5,000 Lowest |
| 3.00 | S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete all as specified and directed | 1,000 | KG | 140 ₹1,40,000 | 120 ₹1,20,000 Lowest |
| 4.00 | Material & Labour for providing and fixing stainless steel (Grade 316 L) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed | 4,000 | KG | 750 ₹30,00,000 | 700 ₹28,00,000 Lowest |
| 5.00 | S & F for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. conforming with Fe-290(Gde- E-165) complete all as specified and directed | 5,000 | KG | 150 ₹7,50,000 | 110 ₹5,50,000 Lowest |
| 6.00 | M&L for preparing of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of anti-corrosive paint over a coat of epoxy primer at any height all as specified and as directed. | 300 | Sqm | 225 ₹67,500 | 90 ₹27,000 Lowest |
| 7.00 | M&L for running welding in repairs, the thickness of metal to be welded is 6mm to 9mm complete all as specified and directed | 25 | 10 RCM | 100 ₹2,500 Lowest | 250 ₹6,250 |
| 8.00 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. | 1 | Cum | 450 ₹450 Lowest | 600 ₹600 |
| 9.00 | M&L for precast cement concrete block masonry in type B1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed. | 1 | Cum | 10,000 ₹10,000 | 9,600 ₹9,600 Lowest |
| 10.00 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 25 | Sqm | 90 ₹2,250 | 42 ₹1,050 Lowest |
Tender Value
₹46.3 L
EMD Value
₹92,600
Closing Date
23 Oct 2025, 6:00 pmClosed
Shri RK Singh IDSE CWE(NW) Kochi
CWE(NW) Kochi
SPECIAL REPAIRS TO 10M TANK AT DIVING SCHOOL NAVAL BASE KOCHI
2025_MES_733440_1
CWE(NW)KOCHI/81595
Open Tender
Civil Works
Item Rate
180 days
Kochi
As per NIT
6 documents required · 6 mandatory
₹500
GE(NW) Kochi
₹92,600
Yes
16 Dec 2025
30 Sept 2025
25 Oct 2025
30 Sept 2025
23 Oct 2025
16 Oct 2025
M&L for preparing of old steel surfaces of any description over 10 cm in width or girth not otherwise described including removing old paint by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth and applying 2 coats of anti-corrosive epoxy paint over a coat of epoxy primer at any height all as specified including all necessary scaffolding work upto 36m height & complete all as specified and directed
Dismantling wrought iron or mild steel work of any description complete all as specified
S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete all as specified and directed
Material & Labour for providing and fixing stainless steel (Grade 316 L) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed
S & F for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. conforming with Fe-290(Gde- E-165) complete all as specified and directed
M&L for preparing of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of anti-corrosive paint over a coat of epoxy primer at any height all as specified and as directed.
M&L for running welding in repairs, the thickness of metal to be welded is 6mm to 9mm complete all as specified and directed
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.
M&L for precast cement concrete block masonry in type B1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed.
Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.
M&L for Machine cut Kota stone slab 18-20mm thick as in floor/ treads of steps (single piece) laid over and including 15mm thick screed in CM 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing complete all as specified and directed.
M&L for machine cut Kota stone slab 18-20 mm thick (single piece) as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar 1:3, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.
M&L for Non skid Endura coloured tiles 8-10mm thick (square/rectangular) grade-4, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm over and including 15mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in Epoxy joint filling minimumum 5mm depth and 4mm thick spacer width complete all as specified and directed.
M & L for epoxy tile joint filling for item No 16 using Kerapoxy of MPAEI or equivalent on floor and walls. All complete as per the manufactures instructions
M&L Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor for levelling of floor as required portion complete all as specified and directed.
M & L for preparation of new plastered external wall surface and applying two coats of weather proof (Apex Ultima protek) paint over a base coat of primer complete all as specified and as directed.
M&L Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a base coat of suitable primer complete all as specified and as directed. Note:- Application of paint, primer shall be as per manufacturer's instruction.
M&L Complete removal of existing surface finishes of wall, preparation of surface and Finishing walls with two coat of epoxy water proofing paint epilux 78 HBTL Paint or equivalent and over priming coat of floor sealer complete all as specified.
Dismantling plain or corrugated steel sheeting any gauge, thickness complete in roofing complete all as specified and directed
S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed
M&L 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having finished with resin coat on both surfaces at 150 gm/ sqm and tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.
S & F 10MM thick toughened glass partition including all fixing items complete all as specified
M&L for opening pressure filter of capacity 62 Cum/hr, drain out water remove all filters media(sand & pebbles) cleaning the internal surface and applying one coat of anti corrosive bituminious paint pebbles duly washed and cleaned with fresh water and reassembly the filter testing and commissioning complete all as specified and directed.
M&L Quartz sand in two grades replacement in the filter grade size 16/30 mm or 6/3 mm complete all as specified and directed.
M&L for disconnecting suction and delivery pipe lines from 10 HP monoblok Pump Set and opening the pump cleaning replacing the worn out part like - ball bearing, gun metal bush, pump shaft repair by lath, repairing of impeller by grinding/polishing water sealant of any type and necessary gland packing etc. which ever be required to making 100% serviceable of pump sets coupled with motor and installed at site as per existing including painting of pump and motor all as specified and directed.
M&L for servicing of the three phase main electric panel including two coat enamel painting as existing color complete all as specified and directed
Supply and laying of 62.5 mm inner dia CPVC Schedule 80 pipes & plain CPVC Schedule 80 fittings on walls/ceiling or laying in floors complete all as specified including taking down old pipes complete all as specified and directed
All as per item No 32 here in above, but 100 mm dia complete all as specified and directed
All as per item No 32 here in above, but 40mm outer dia but with SDR 13.5 pipes & plain CPVC SDR 11 fittings complete all as specified and directed
All as per item No 32 here in above, but 25mm dia complete all as specified and directed
Supply and fixing 40 mm outer dia CPVC Ball valves complete all as specified and directed including taking down old valve complete all as specified and directed
All as per item No 36 here in above, but 25 mm bore valve complete all as specified and directed
Supply and fix Y type strainer in suction line of pump set all as specified and directed.
S & F in repair Ductile Iron Pipes 300 mm(12") dia bore centrifugally cast (spun) including jointing in standard length, with flanged ends, Class "K9" conforming to IS 8329-2000 (latest version) in any length laid in trenches including taking down unserviceable old one, all as specified and directed.
S & F in repair 300 mm bore Cast iron sluice valve with flanged ends of type PN 1.6 conforming to IS 14846 with cast iron wheel and brass spindle, all as specified and directed
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15cm thickness, below or above ground level complete all as specified and directed
Material and labour, plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed.
Dismantling of stone slabs/ tiles of any description or thickness laid and bedded in any mortar complete all as specified and as directed.
M&L for cement concrete 1:4:8, type D2 using 40mm graded stone aggregates as in sub base of floor/ pavement, 75mm thick all as specified and as directed.
Taking down carefully existing copper/ alumn point wiring for light/ fan/ belli socket 5/15 Amp points F complete with fitting and fixtures such as switches, sockets c/rosess holders and bracket fittings with battens/ conduits/ wires T/L fittings and making good the disturbed surfaces of walls and roofs etc and to match with existing colour complete all as specified and directed
Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified
S&F point wiring with 1.5 Sqmm PVC insulated sheathed FRLS multistranded single core copper P conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/roof except beam, column and RCC roof including chases cutting inci suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc inxi 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed
M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed. Make for modular switches and sockets for item Nos. 4 to 6: Legrand/Siemens/ Schneider
S&F Ceiling rose surface type, 240 volts, 50 Hz. 6A. Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed
Supply and fixing LED light fitting 1 x 20 Watt. 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
S&F LED flood light fitting of 100W, warm white, 240 Volts, single phase complete with driver suitable for roof ceiling/ wall including connecting up with driver three core flexible copper conductor of size 23/00.0076 all as specified and directed Make- Luker, Model- ALCOR SG, Cat Part No-LFLSL100NSG or euivalent in Crompton/ Bajaj
M&L for Sub main wiring with two single core 2x4 sqmm FRLS insulated and sheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed. (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length)
S&F in replacement of Factory made sheet metal enclosures for DB's when MCB's to be used single phase and neutral, double door distribution board 4 way, bus bar of capacity 200 Amps, suitable for use on 240V Make for modular MCBS, DBs and MCCBs for item Nos. 9 to 11 Legrand/Siemens/ Schneider
S&F MCB SPN, 32 Amps 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.
S&F MCB SP, 6A-32 Amps, 240 volts, "C" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.
S&F XLPE insulated, armoured, 1100 volts grade, heavy duty cable of size 6 Sqmm nominal cross section, 2 core, aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor on pole including jointing with double compression copper stain less steel gland at DBs and testing. complete all as specified
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.62 MB
Tenderdocument.pdf
Tender Documents • 1.41 MB
BOQ_821230.xls
BOQ • 0.37 MB
Criticaldates.pdf
PDF • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .