REPAIR AND CLEANING OF SEWAGE LINE MANHOLES SEPTIC TANKS SOAKAGE WELLS WATER TANK CLEANING CLEANING OF DRAIN PIPES ETC UNDER GE EAST BAREILLY

Amount

Demolition and breaking up of drain pipe 100 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up of drain pipe 150 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up of drain pipe 200mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up of drain pipe 450 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition of cement concrete un-reinforced of any description and in any portion not otherwise specifically provided for sewage line bed and manhole complete all as specified and directed.

Demolition of reinforced cement concrete (reinforced cut as required to facilitate to demolition) of any sescription and in any portion not otherwise specified complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc,and rubbish off the premisses complete all as specified and directed.

Taking down cement plaster of any description on brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling water storage tank exceeding 250 litre and not exceeding 500 litre capacity and removing from site complete all as specified and directed.

Dismantling water storage tank exceeding 500 litre and not exceeding 1000 litre capacity and removing from site complete all as specified and directed.

Taking down eaves gutters and rain water pipes(any size or pattern) including all fittings heads shoes, bends necks, etc including removal from site (measured overall fixed along the centre line over fittings and accessories) complete all as specified and directed.

Dismantling of 75mm bore cast iron / pvc drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.50 Sqm but not exc 4 sqm each complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portionin Concrete, brick work, masonry, etc. and making good disturbed ground in Concrete, brick work, masonry, etc.

Dismantling of old barbed wire fencing

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in Soft /Loose soil complete all as specified and directed.

All as per item no 19 above but depth exc 1.5m and n.exc 3m complete all as specified and directed.

All as per item no 19 above but depth exc 3 m and n.exc 4.5 m complete all as specified and directed.

All as per item no 19 above but depth exc 4.5 m and n.exc 6 m complete all as specified and directed.

Returning filling in, Including spreading, levelling,. Watering and well ramming soil in layers not exceeding 25 cm thick, complete all as specified and directed.

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed

M&L Plain Cement Concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and and as directed by Engr-in- Charge.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and and as directed by Engr-in- Charge

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 , including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipe of 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in concrete bed to drain pipe of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate) concrete bed to drain pipe of 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate) concrete bed to drain pipe of 450 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M & L 100 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.

M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes complete all as specified and directed.

M & L 200 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes as specfified

M & L 450 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointescomplete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate ) as in coping/benching including necessary form work complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) for slab supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slab, manhole cover and in shelves and the like complete all as specified and directed.

M&L formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exe 200mm thick (horizontal or slooping for rough finished surface of concrete complete all as specified and directed.

M & L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide with fair finished surfaces complete all as specified and directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 600x600x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 complete all as specifide and directed by Engr -in - Charge . (Make:- (i) Super cement articles MIDC Satpur, Nashik (ii) JR Cover company Borivali west, Mumbai (iii) BRHC pipe Industuries Ballabhgarh, Faridabad (iv) Terra firma Development (P) Ltd. Lodi Colony, New Delhi or equalvalent as approved by GE.

M&L factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 700x700x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 complete all as specifide and directed by Engr -in - Charge .(Make:- (i) Super cement articles MIDC Satpur, Nashik (ii) JR Cover company Borivali west, Mumbai (iii) BRHC pipe Industuries Ballabhgarh, Faridabad (iv) Terra firma Development (P) Ltd. Lodi Colony, New Delhi or equalvalent as approved by GE.

M&L factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage ,with carrying handle size 1200x400x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 complete all as specifide and directed by Engr -in - Charge .(Make:- (i) Super cement articles MIDC Satpur, Nashik (ii) JR Cover company Borivali west, Mumbai (iii) BRHC pipe Industuries Ballabhgarh, Faridabad (iv) Terra firma Development (P) Ltd. Lodi Colony, New Delhi or equalvalent as approved by GE.

M&L factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 1000 x 500x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 complete all as specifide and directed by Engr -in - Charge .(Make:- (i) Super cement articles MIDC Satpur, Nashik (ii) JR Cover company Borivali west, Mumbai (iii) BRHC pipe Industuries Ballabhgarh, Faridabad (iv) Terra firma Development (P) Ltd. Lodi Colony, New Delhi or equalvalent as approved by GE.

M&L factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,size 900x600x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 complete all as specifide and directed by Engr -in - Charge .(Make:- (i) Super cement articles MIDC Satpur, Nashik (ii) JR Cover company Borivali west, Mumbai (iii) BRHC pipe Industuries Ballabhgarh, Faridabad (iv) Terra firma Development (P) Ltd. Lodi Colony, New Delhi or equalvalent as approved by GE.

M&L factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle,siz1000x500x75 mm thick square shape , heavy duty factory made confirmig to IS - 12592 complete all as specifide and directed by Engr -in - Charge .(Make:- (i) Super cement articles MIDC Satpur, Nashik (ii) JR Cover company Borivali west, Mumbai (iii) BRHC pipe Industuries Ballabhgarh, Faridabad (iv) Terra firma Development (P) Ltd. Lodi Colony, New Delhi or equalvalent as approved by GE.

M&L factory made RCC manhole covers of concrete M30 reinforced with steel fiber,provided with mild steel rims for protected edges from damage with carrying handle ,size 650 mm dia & 75 mm thick Circular shape , heavy duty factory made confirmig to IS - 12592 complete all as specifide and directed by Engr -in - Charge .(Make:- (i) Super cement articles MIDC Satpur, Nashik (ii) JR Cover company Borivali west, Mumbai (iii) BRHC pipe Industuries Ballabhgarh, Faridabad (iv) Terra firma Development (P) Ltd. Lodi Colony, New Delhi or equalvalent as approved by GE.

S&F in repairs vitreous china water closet pan (Pedestal pattern), white with and including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flush pipe, anti syphonage pipe, etc. complete all as specified & directed. ( Make : Parryware Model C0252 or equivalent as approved by GE)

S&F in repair vitreous China squatting pan 'Orissa pattern', size 580 x 440 mm white, with integral foot rests and cast iron 'P' or 'S' trap 100mm dia, front or back inlet including connections to flush pipe including making good to floor with existing finish complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for gazed ceramic coloured tiles of size 300x200x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white or coloured cement and pigment to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F in repair PVC (SWR) pipe 110mm bore single socketed with rubber ring joint fixed to walls including mild steel Stack clamps made out of 50mmx 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof surface complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75mm bore single socketed with rubber ring joint fixed to walls including mild steel stack clamps made out of 50mmx 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof surface complete all as specified and directed.

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

S&F in repair bend PVC (SWR) with oval excess door 110mm bore complete all as specified and directed.

S&F in repair bend PVC (SWR) with excess door 75mm bore complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

M&L for cleaning of RCC or PVC water tank at any height (on accessible / inaccessible of roofs) by removing all scale, dirt, mud etc. from tanks capacity exc 500 ltrs but not exc 1000 ltrs unpluging flushing out and cleaning proporly internally and externally with detergent powder complete, and again cleaning with fresh water including plugging back from mouths of circulating pipes & change if nipple, union etc. complete all as specified and directed

S & F in repair for ISI marked Ball valves high pressure of PTMT 15mm bore with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Minimum weight 210gms) complete all as specified and directed

S&F in repair service tank lid / cover of size 0.45 m dia and 0.20 m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity incl necessary nut, bolts washers and locking arrangement complete all as specified and directed.

S&F rotational moulded polythene water tank of 500 Ltrs capacity (cylindrical vertical with closed top) triple layer, ISI marked hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge.

S&F 1000 litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer ISI marked hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 2 1 0 gms ) complete all as specified and directed

Pumping out of liquid sludge etc, from septic tank/soak well/ manhole complete all as specified and directed.Note- The unit rate quoted under this item shall deemed to include the arrangements of Sewage pump and delevery pipe minimum 60 mtr length and all necessary T&P with man and material and safety equipment etc complete all as specified and as directed by Engineer-in-Charge

De watering from Sump well up to 26' feet deep and up to 8 mtr dia by portable pumping set and taking out manually waste material like sludge , mud ,soil , sanitory a material and other dirts etc from inner sump and outer housing sump by using labour/ equipment and depositing the same waste material at low lying area by digging pits all as , cleaning and washing the surface area of sump well with wire brush and removing the algae growth including removal of grass/tree roots including one coat brush of bleaching powder at wall of sump etc all as spedified and directed by Engr - in - charge

Cleaning/clearing blocked sewage lines 100 mm bore (PVC/ SGSW/RCC hume pipe ) any depth by rodding between manhole to manhole manually incl pumping out sludge, water from manholes, (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 60 metre delivery pipe daily at 0830 hrs to 1700 hrs including disposal of debris, spoils and sludge hygienically complete all as specified and directed. Notes : (i) The contractor/ his authorise supervisor of the work will report daily at complaint cell AGE B/R III Bareilly (for zone A ,B,C & D) at 0830 Hours to receive day to day complaints. ii) All sewage complaints must be attended immediately on receipt but not later than 24 hour. iii) Recovery (Penalty) for not attending complaint beyond 24 hours shall be Rs 200.00 per complaint per day delayed.)

Cleaning/clearing blocked sewage lines 150 mm bore (PVC/ SGSW/RCC hume pipe ) any depth by rodding between manhole to manhole manually incl pumping out sludge, water from manholes, (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 60 metre delivery pipe daily at 0830 hrs to 1700 hrs including disposal of debris, spoils and sludge hygienically complete all as specified and directed. Notes : (i) The contractor/ his authorise supervisor of the work will report daily at complaint cell AGE B/R III Bareilly (for zone A ,B,C & D) at 0830 Hours to receive day to day complaints. ii) All sewage complaints must be attended immediately on receipt but not later than 24 hour. iii) Recovery (Penalty) for not attending complaint beyond 24 hours shall be Rs 200.00 per complaint per day delayed.)

Cleaning/clearing blocked sewage lines 200 mm bore (PVC/ SGSW/RCC hume pipe ) any depth by rodding between manhole to manhole manually incl pumping out sludge, water from manholes, (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 60 metre delivery pipe daily at 0830 hrs to 1700 hrs including disposal of debris, spoils and sludge hygienically complete all as specified and directed. Notes : (i) The contractor/ his authorise supervisor of the work will report daily at complaint cell AGE B/R III Bareilly (for zone A ,B,C & D) at 0830 Hours to receive day to day complaints. ii) All sewage complaints must be attended immediately on receipt but not later than 24 hour. iii) Recovery (Penalty) for not attending complaint beyond 24 hours shall be Rs 200.00 per complaint per day delayed.)

Cleaning/clearing blocked sewage lines 450 mm bore (PVC/ SGSW/RCC hume pipe ) any depth by rodding between manhole to manhole manually incl pumping out sludge, water from manholes, (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 60 metre delivery pipe etc, daily at 0830 hrs to 1700 hrs including disposal of debris, spoils and sludge hygienically complete all as specified and directed. Notes : (i) The contractor/ his authorise supervisor of the work will report daily at complaint cell AGE B/R III Bareilly for( zone A ,B,C & D) at 0830 Hours to receive day to day complaints. ii) All sewage complaints must be attended immediately on receipt but not later than 24 hour. iii) Recovery (Penalty) for not attending complaint beyond 24 hours shall be Rs 200.00 per complaint per day delayed.)

Cleaning/clearing blocked sewage lines 75mm to 150mm bore (PVC/ SGSW/RCC hume pipe ) any depth by rodding manually incl pumping out sludge, water from trap etc. (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 60 metre delivery pipe including clearing spot blockages of floor traps , Nahani trap, Gully trap and drainage pipe etc, daily at 0830 hrs to 1700 hrs incl disposal of debris, spoils and sludge hygienically complete all as specified and directed. NOTE : (i) The contractor/ his authorise supervisor of the work will report daily at complaint cell AGE B/R III Bareilly (zone A ,B,C & D) at 0830 Hours to receive day to day complaints. ii). All sewage complaints must be attended immediately on receipt but not later than 24 hour. iii). Recovery (Penalty) for not attending complaint beyond 24 hours shall be Rs 200.00 per complaint per day delayed.)

Cleaning/clearing blocked sewage lines 75mm to 150mm bore (PVC/ SGSW/RCC hume pipe ) any depth by rodding between WC to First Manhole manually incl pumping out sludge, water from manholes etc. (where required) including providing trolley mounted pump set with suction pipe of adequate length and minimum 60 metre delivery pipe including clearing spot blockages of WC, etc, daily at 0830 hrs to 1700 hrs incl disposal of debris, spoils and sludge hygienically complete all as specified and directed. NOTE : (i) The contractor/ his authorise supervisor of the work will report daily at complaint cell AGE B/R III Bareilly( zone A ,B,C & D) at 0830 Hours to receive day to day complaints. ii). All sewage complaints must be attended immediately on receipt but not later than 24 hour. iii). Recovery (Penalty) for not attending complaint beyond 24 hours shall be Rs 200.00 per complaint per day delayed.)

Excavating in post holes (or similar holes) each n. exc. 0.5 cum, gettting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance n exc. 50 mtr and making good surface complete all as specified and as directed.

M &L PCC (1 :2:4) type B2 (using 40mm graded crushed stone aggregate) as in post holes complete all as specified and directed.

S&F mild steel Posts and struts in fencing (size angle 65x65x6) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagnal faces of each pannel to be intertwined with Chainlink fencing, and fixed to posts with MS nut bolts and washers including all necessary drilling bolting etc, and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces,manhole covers fream etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work and similar work con- forming to Fe.290.Gde-E-165,fixing with welding etc.complete all as specified and directed

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates,fixing with welding conforming to Fe 410 -W (Gde- E- 250) quality- A etc.complete all as specified and directed

Fixing only chain link fencing including line wire any mesh size and type of standards raills, starining bolts ewtc including provisioning of binding wire complete all as specified and directed .

Supply only chain link M S galvanised fencing (IS-272) mesh 75 x75 mm (Minimum dia 4 mm and weight of mesh n.exc 4.0 kg/sqm) complete all as specified and directed

S & F Mild steel screw bots (machine made ) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but not exc 15 cm and 15mm dia complete all as spd & directed..

M & L Expanded metal, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight per Sqm Exc 4 kg complete all as specified and directed

S & F 1.25 mm thick Mild steel, plain black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required complete including cutting out of existing sheet if required complete all as specified and directed

M&L for Cement concrete type B2 1:2:4 (40 mm graded crushed stone aggregate) as in foundations, filling and mass-concrete for embedded in fencing post to post above & below GL complete all as specified and directed

S & F formwork to sides of Rough finished surfaces of concrete of concrete foundations, footings, sides and soffits above/below GL concrete complete all as specified and directed

M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L for Machine pressed cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 Grade, machine pressed of pattern and colour as approved by GE complete all as specified and directed.Make : M/s Mayur tiles , M/s Jain tiles industries or equivalent as approved by GE.

M&L for PCC (1:2:4) type B1 using 20mm graded agg for machine pressesd precast cement concrete kerb stone of size 300x150x450mm including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone as directed.

M & L Preparation of new steel surfaces exc 10 cm width or girth and applying two coats of syntetic enamel paint over one coat of red oxide of zinc chrome primer complete all as specified and directed .

M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint over and including one coat of cement wash primer complete all as specified and directed

UTTRAKHAND BUILDERS

M/S Gupta Builders