Construction of Jail Complex near Nerchowk at Mandi Distt Mandi HP SH Construction of Kitchen Dispensary Canteen block including internal WS SI development of site and 5000 liters capacity rain water harvesting tank

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed by Engineer-in -charge, with all lead and lift. All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material in all leads and lifts. - All work up to plinth level.

1:2:4 (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size)

1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)

1:8:16 (1cement: 8sand:16graded stone aggregate 20mm. nominal size)

Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in String courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of material in all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form work including carriage of material in all leads and lifts.

Foundation, footings basis of columns etc. and mass concrete

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etc. upto 200mm in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like.

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Stair cases with sloping or stepped soffits excluding landing

Edges of slabs and breaks in floor and walls. Above 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of material in all leads and lifts..

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of material in all leads and lifts..

Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Add for using extra cement in the items of design mix over and above the specified cement content therein. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. Extra for providing richer mixes at all floor levels. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) including carriage of material in all leads and lifts.

All works upto plinth level

All works above plinth level

Providing & laying cement concrete having strength of M-20 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in chajjas upto any thickness upto all heights i/c finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand) to give a smooth and even surface i/c centering/form work and curing complete but excluding cost of reinforcement including carriage of material in all leads and lifts.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg. per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including carriage of material in all leads & lifts.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. of cement per sq.metre of floor area before laying cementconcrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:-Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :- In Cement Mortar 1:6 (1 Cement : 6 Sand).

Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material in all leads and lifts. in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Random rubble masonry/polygonal rubble masonry (un-coursed/ brought to course) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level.including carriage of material in all leads and lifts:- In Cement mortor 1:6 (1;cement 6:sand).

Boulder filling dry hand packed tightly as in and under floor including watering,ramming and consolidating complete including carriage of material in all leads and lifts.

Providing and fixing fully glazed shutter for window, ventilators and clerestory windows top rail and bottom rail 75mm width and chamfered edged beading 20mmx10mm for glass panes including bright finished black enameled iron butt hinges with necessary screws etc. complete 40mm thick 2nd class deodar wood including carriage of material in all leads and lifts.

Providing and fixings glass panes with putty and nails:- Plain glass 4mm thick including carriage of material in all leads and lifts.

Providing and fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 –G with wire of dia 0.56mm for doors, windows and clerestory windows and chamfered edged beading 20x12mm including bright finished black enameled iron hinges with necessary screws including carriage of material in all leads and lifts:- 40 mm thick 2nd class deodar wood.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material in all leads and lifts:- Plain grill.

Providing and fixing flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak plyveneering with vertical grains or cross bends and face vencering on both faces of shutter including carriage of material in all leads and lifts:- 40mm thick including black enamelled M.S. butt hinges.

Providing and fixing stainless steel power coated sliding door bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts:- 250X16mm

Providing and fixing stainless steel power coated tower bolts (barrel type) of required shade and colour with screws, etc. complete including carriage of material in all leads and lifts:-

Providing and fixing stainless steel power coated handles to required colour and shade with necessary screws, etc. complete including carriage of material in all leads and lifts:-

Providing and fixing stainless steel power coated hooks and eyes:- 150mm including carriage of material in all leads and lifts.

Providing and fixng 100mm bright finished stainless steel power coated floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads and lifts.

Providing and fixing bright finished or/and black enamelled iron (Helical door spring 150mm) including carraige of material in all leads and lifts.

Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick White makrana marble/Baroda green including carriage of material in all leads and lifts.

Digital tiles in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of material in all leads and lifts.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles any size/colour manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.

Providing and laying Duro stone vetrified tiles (any size ) 10mm thick any /coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.

Providing and laying Duro stone vetrified tiles (any size ) 8mm thick in grey/coloured or of approved shade in skirting, riser of step and dado on 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.

50mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement including carriage of material in all leads and lifts.

Painting top of roofs with bitumen of approved Quality at 17kg for 10 Sqm. Impregnated with a coat of sand at 0.06cum per 10sqm. Including cleaning the slab surface with brushed and finally with a piece of cloth lightly soak in kerosene oil complete with residual type perroleum bitumen of penetration 80/100 including carriage of material in all leads & lifts.

Providing and fixing 19mm thick commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc completee including carriage of material in all leads and lifts.

Providing and fixing 4mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately).including carriage of material in all leads and lifts.

Providing and fixing MS holder bat clamps of approved design to CI or PVC pipe embedded in and including cement concrete blocks 10x10x10cms of 1:2:4mix(1cement:2sand:4graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the walls etc. including carriage of material in all leads and lifts;-100mm diameter CI/PVC pipe.

Providing and fixing on wall faces PVC (D-Plast) for rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. including carriage of material in all leads and lifts:- 100 mm dia pipes

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads and lifts

PVC Plain bend 100mm dia

PVC shoe 100mm dia

Prokviding and fixing 65x35mm. special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. complete. (Indian make of approved quality). including carriage of material in all leads and lifts.

Providing and fixing steel hydroluics hinges with screws, nuts, bolts etc. complete including carriage of material in all leads and lifts.

Providing and fixing catcher with screws, nuts, bolts etc. complete including carraige of material in all leads and lifts.

Providing and fixing bright finished brass handles with screws etc. complete including carriage of material in all leads and lifts.;- 125mm

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts:-

In gratings, framed guard, bars, ladders, railings, brackets and similar work.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely. including carraige of material in all leads and lifts.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge including carraige of material in all leads and lifts.

PROFILE -A

PROFILE -B

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material in all leads and lifts:- With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters including carriage of material in all leads and lifts:- Enamel white paint other than white.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting including carriage of material in all leads and lifts:- Readymixed paint brushing wood primer pink.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of material in all leads and lifts:- With white enamel pain tother than white.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood fille.

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriaage of material in all leads and lifts:- In Cement mortar 1:3 (1cement:3sand).

Extra over item above for finishing with floating coat of neat cement slury including carriage of material in all leads and lifts.

CEMENT PLASTER (IN FINE SAND) 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.

CEMENT PLASTER (IN FINE SAND) 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.

Extra cost for providing and mixing polyester triangular synthetic fibres in specified ration 6-18mm length designed for melting point 240-260 degree centigrade and having specific gravity of 1.33-140 as per IS-456 amendment August 2007 & IRC 44- 2008 @ 125 grams/50kg of cement bag in all types of CC, RCC, plastering and flooring work etc.including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops,dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated on ceiling and/or sloping roofs. surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material in all leads and lifts.

Finishing wall with weather proof exterior grade mulsion of approved design (Apexultima) or its quarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.) including carriage of material in all leads and lifts.

Supplying and fixing expended metal to wood or steel members in partitions etc.;-Weight exceeding 5kg. and not exceeding 8kg. per square metre including carriage of material in all leads and lifts.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe)including carriage of material in all leads and lifts.

Providing and fixing to wall ceiling and floor Polyethene- Aluminium- Polyethene (PE-AL-PE composit pressure pipes confirming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80 degree C, including all special fittings of composite materiial (Engineering plastic blend and brass inserts whereever required) e.g. elbows, tees, reducers, couplers and connectors etc. with clamps at 1.0 metre spacing. This includes testing of joints complete as per directions of the Engineer-in-charge including carriage of material in all leads and lifts:-20mm outer dia.

Providing and fixing to wall ceiling and floor galvanised mild steel tube (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor including carriage of material in all leads and and lifts;-20mm nominal size

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts.

1000 litres net capacity tank

2000 litres net capacity tank

Proviidng and fixing sand cast/cast iron spun and spigot and socket soil waste and ventilating pioe (lead caualked joints to be measured and paid for separately) including carriage of material in all leads and lifts:- 100mm nominal bore.

Providing and fixing cast iron cowl 100mm nominal size including carriage of material in all leads and lifts.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm thick bolts and nutscomplete including fixing with approved adhsive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts;-110 mm X 75 mm.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of material in all leads and lifts;-Ordinary closet.

Providing and fixing PTMT Coloured/white high density polyethylene/poly propylene 10 litres capacity (full flush) European standred control low level flushing cistern with fittings with a pair of brackets with fitting such as lead valve,syphon,15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet outlet and over flow pipe,40mm dia C.P flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts;-610 X 510 mm with bowl depth 200mm

Providing and fixing P.V.C connection with brass unions including carriage of material in all leads and lifts, 300/450mm length ;-15mm dia

Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg including carriage of material in all leads and lifts,Square Mouth Traps;-100mmX100mm size P or R type.

Providing and fixing vitreous China wash basin with single/double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads and lifts;-Flat back 550mmx400mm.

Providing and fixing C.P. Brass waste for wash basin or sink including carriage of material in all leads and lifts;-32mm dia

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads and lifts.

Providing and fixing 100 dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of material in all leads and lifts.

Providing and fixing G.I./M.I Union of following sizes (where not included in the items) including carriage of material in all leads and lifts;-20mm

Providing and fixing 32 mm P.V.C. waste pipe for wash basin or sink including brass check nut including carriage of material in all leads and lifts.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of material in all leads and lifts;-white plastic seat and cover.

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed towooden plugs with C.P. Brass screws including carriage of material in all leads and lifts ;-600mmX20mm.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of material in all leads and lifts.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top including carriage of material in all leads and lifts

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of material in all leads and lifts

Providing and fixing brass full way valve with wheel including carriage of material in all leads and lifts;-20mm nominal bore

Providing and fixing C.P.brass bib tap with capaction head including carriage of material in all leads and lifts ;-15mm dia

Providing and fixing C.P.brass pillar tap with capaction head including carriage of material in all leads and lifts ;-15mm dia.

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe including carriage of material in all leads and lifts.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts.

Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs. Depth of cutting including carriage of material in all leads and lifts;-Holes upto and including 400 Sq.cm in area.

Constructing man hole with RCC top slab in 1 : 2 : 4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 15 mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing i/c carriage of material in all leads & lifts ncluding carriage of material in all leads & lfits.

Inside size 800x800mm and 500mm deep with steel S.F.R.C frame cover (medium duty) 560mm internal diameters total weight of cover and frame not to be less 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick wall of bricks masonary using common brunt clay building bricks in cement mortar 1:3 (1 cement : 3 sand).

Inside size 800x800mm and 1000mm deep with steel S.F.R.C frame cover (medium duty) 560mm internal diameters total weight of cover and frame not to be less 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick wall of bricks masonary using common brunt clay building bricks in cement mortar 1:3 (1 cement : 3 sand).

Providing and laying , jointing and testing in trenches centrifugally cast spun ductile iron pipes conforming to BIS 8329-2000 (latest with up to date amendments ) in a length of 5.50 meters class K7 with cement mortar ning in side duty ISI marked including cost of Tyton (push or joints) fitting including testing of joints and rubber gasket (S&R guality) conforming to IS-92820-1989(Earth work in trenches to be measured and paid for separetely);-150mm dia in all leads and lifts.

Proviidng 200mm wide cast iron rungs with chequered or ribbed non-slip surface including fixing in manholes septic tank with 200mmx200mmx100mm cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.

Supplying and fixing cast iron cover with frame for manhole of internal diamensions 450x610mm rectangular C.I cover (light duty) single seal pattern-I, the weight of cover and frame to be not less than 38kg. (Weight of cover 23kg and weight of frame 15kg), including carriage of material in all leads and lifts.

Gaurav Chaudhary

Rajesh Kumar