Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹74.9 L
EMD Value
₹1.5 L
Closing Date
20 Oct 2026, 3:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer PWD RnB
Executive Engineer PWD RnB Mohanpur Division
Bamboo Palasiding,Earth Filiing,Carpeting,Retaining wall,,RCC Drain etc Complete from ch 0.00 km to 2.30km
2026_CEPWD_78088_1
78/R/DNIe-T/SE-IV/PWD/2026-27
Open Tender
Civil Works - Roads
Percentage
180 days
Mohanpur
As per DNIT
7 documents required · 7 mandatory
₹4,000
₹1.5 L
13 Oct 2026
13 Oct 2026
20 Oct 2026
13 Oct 2026
20 Oct 2026
14 Oct 2026
13 Oct 2026 - 16 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Single bamboo palasiding/walling of whole 2nd class bambo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying with wire complete and struts 1.5 m apart longitudinally and providing bitumen drum sheet walling fixed with nails as per drawing and MORD technical specification caluse 1302.5.
A) driven at least 900 mm below ground and 1200 mm above ground on average. | 120 | mtr | 1,149.4 | ₹1,37,928 |
| 2 | Construction of Embankment with Material Obtained from Borrow Pits .Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m,transporting to site, spreading, grading to required slope
and compacting to meet requirement of Tables 300.1 and300.2 with a lead upto 1000 m as per MoRD TechnicalSpecification Clause 301.5. | 147.05 | cum | 313.4 | ₹46,085.47 |
| 3 | Excavation for Structures A. Without dewatering. Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including settingout,construction of shoring &bracing, removal of stumps & other deleterious material and disposal upto a lead of 50m,dressing of sides & bottom and back filling in trenches with excavated suitable material. Ordinary Soil (i) Upto 3 m depth | 302 | cum | 458.2 | ₹1,38,376.4 |
| 4 | Filling in foundation trenches as per drawing & MoRD
technical specification Clause 305.3.9, 1200. I) Sand filling | 24.7 | cum | 1,364.4 | ₹33,700.68 |
| 5 | Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including
centering, shuttering, staging etc. but excluding reinforcement P.C.C grade M 10 ii)Nominal mix 1:3:6 (Hand mixing) | 22.3 | cum | 9,612.1 | ₹2,14,349.83 |
| 6 | Plain/reinforced cement concrete in substructure complete
including formwork as per drawings & MoRD technical
specification Clauses 802, 804, 805, 806, 807, 900, 1202 &
1204. (including centering, shuttering, staging etc. but
excluding reinforcement) R.C.C grade M-20 (1:2:4) (Nominal mix) i) upto 5 m height | 78.23 | cum | 12,223.15 | ₹9,56,155.91 |
| 7 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructurecomplete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202. | 9.39 | tone | 91,867.3 | ₹8,62,358.35 |
| 8 | Backfilling behind abutment, wing wall & return wall
complete as per drawings & MoRD technical specification
Clause 1204.3.8.I) Sandy material | 99.66 | cum | 1,592.1 | ₹1,58,668.69 |
| 9 | Providing & laying reinforced cement concrete in superstructure as per drawings & MoRD technical specifications Clauses 800, 900, 1205.4 & 1205.5 (includingcentering, shuttering, stagingetc.butexcluding
reinforcement). (I) R.C.C grade M 20 (i) For nominal mix 1:2:4 | 9.63 | cum | 13,211.85 | ₹1,27,164.06 |
| 10 | Supplying, fitting, &placingThermo-Mechanically treatedbar/ Cold twisted deformed steel bar reinforcement in super structure complete as perdrawing&MoRDtechnical specifications Clauses 1002, 1010 & 1202 | 1.16 | tone | 93,619 | ₹1,08,129.95 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.96 MB
BOQ_79499.xls
BOQ • 0.29 MB
dd.pdf
Tender Documents • 3.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .