NEW DRAINAGE LINE AND SWD LINE MAINTANANCE WORK AND UPGRADATION WORK at KKNagar Road, Karmacharinagar Road, CPNagar Road, Ghatlodia Gam Road and Other Diff. Area of Ghatlodia Ward in North West Zone. (ARC)

Providing and laying in position Ready Mixed

M200 grade concrete for reinforced cement

conctere work , using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to site

of work in transit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of

29 5.00 laying, excluding the cost of centering 4793.10 Cu.M.

shuttering finishing and reinforcement including

cost of admixtures in recommended proportions

as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS

shall be maintained) (R &B SOR 2023-24

Ahmedabad cit; Item no. 5055 Page no. 66)

Labour charger for lowering existing

Ventilating column safely with the help of

required capacity of hydra crane or any type of

required capacity of crane. Item also includes

welding machine , gas cutter , electric cutter

30 5.00 breaker etc necessary machineries required for 5803.57 No

this work with out damage and item also

includes carting the same to the AMC store. etc.

comp as directed.(Based on Drainage SOR

Constructing Bombay Pattern Type Catch Pit of

size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick

brick maso. wall in the prop. of CM (1:6) with

40 mm thick IPS flooring in the prop M15 at

bottom and 15 mm thick cement plaster inside

the catch pit in the proportion of CM (1:3) with

out jali etc. comp. as directed.(Based on

Drainage SOR 2009-10)After Deduction 12 %

CatchPit Jali Fixing P/F FRC catch pit jali with

frame 600mm x 600mm clear opening etc.

32 5.00 comp. As directed by engineer in charge. 1383.92 No

(Based on Drainage SOR 2009-10)After

Deduction 12 % GST)

Providing, laying and jointing in true line and

level U.P.V.C pipe (SCH - 40) of following dia.

including fittings of standard make as approved

by Engineer - in - charge. Pipe shall be fixed on

the wall with the help of clamp at every shall

33 be concealed as directed including necessary

Tee ,bend, any joint & any fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including cost

of all materials ((R &B SOR 2023-24 page no.

A 5.00 15 mm (I.code no. 23061) 71.93 RMT

B 5.00 25 mm (I.code no. 23062) 90.93 RMT

C 5.00 32 mm (I.code no.23063) 117.93 RMT

D 5.00 40 mm (I.code no. 23064) 146.65 RMT

E 5.00 50 mm (I.code no. 23065) 193.73 RMT

F 5.00 110mm (I.code no. 23067) 826.88 RMT

G 5.00 160 mm (I.code no. 23066) 822.99 RMT

Providing, supplying & fixing to wall ceiling

and floor 10.0 kg. F/Cm2 working pressure

polythelene pipes of the following outside dia.

Low density. Complete with special flange

34 empression type fittings. Wall clips etc. incl.

making good the wall ceilling and floor. ( Item

Code 23004F & 23004G No 23.8 PG No.164

.Ahmedabad City S.OR.2023-24

Providing and operation dewatering Pump

including fuel charges & operator Charges etc.

as directed etc. comp. (Shift for Eight Hour)

(For Each Pump Set, No payment should be

allowed for non working condition of

Dewatering by pumping set

Dewatering by pumping set of required capacity

including temporary platform carting pumping

36 15.00 at site and fixing the same in position including 18.32 H.P/Hr

all accessories, and fuel and labour etc.

complete. (GWSSB SOR 2022-23 (revised)

Section 2E item no. 1 on page no. 104)

Hiring and operating the 20 KV 3 Phase Electric

Generator for operating desilting machinery,

and lighting and other requirements with

Arranging diesel to run the D.G. Set Do As

37 10.00 Directed. 8 Hrs Shift. (No payment should be 2500.00 Shift

allowed for non working condition of

machinery) (Based on Drainage SOR 2009-

10)After Deduction 12 % GST)

Providing & Supplying JCB Machine on rental

basis in case of emergency situation and break

down type work & also during unavoidable

condition as per instruction of engg. in charge,

rate includes all nece. shifting, fuel and

38 10.00 operating charges and stacking of useful & non- 535.71 Hour

useful materials separately up to store. (No

payment should be allowed for non working

condition of machinery and for pipe line

excavation and laying work) (Based on Drainage

SOR 2009-10)After Deduction 12 % GST)

Supplying Pneumatic Breaker Machine for RCC

Slab or Asphalt Demolishing Work on site by

using Operator, fuel, power Supply etc.

Complete as Directed. (No payment should be

39 10.00 allowed for non working condition of 535.71 HR.

machinery and for pipe line excavation and

M.H. work. Allowed only for break down work)

(Based on Drainage SOR 2009-10)After Deduction

Providing & Supplying Hitachi Machine-110

capacity on rental basis in case of emergency

situation and break down type work & also

during unavoidable condition as per instruction

40 10.00 of engg. in charge, rate includes all nece. 1785.71 HR.

shifting, fuel and operating charges . (No

payment should be allowed for non working

condition of machinery)

Providing & Supplying Hitachi Machine-200

capacity on rental basis in case of emergency

situation and break down type work & also

during unavoidable condition as per instruction

41 10.00 of engg.incharge , rate includes all nece. 2471.20 HR.

shifting, fuel and operating charges. (No

payment should be allowed for non working

condition of machinery) (Based on Drainage

SOR 2009-10)After Deduction 12 % GST)

Providing & Supplying hydra carne Machine of

12 tone capacity on rental basis in case of

emergency situation and break down type work

& also during unavoidable condition as per Per

42 5.00 instruction of engg. in charge, rate includes all 3334.49 hr

nece. shifting, fuel and operating charges. (No Shift

payment should be allowed for non working

condition of machinery) (GWSSB SOR 2022-23

(revised) Section 2E item no. 7 on Page no. 105)

43 Providing F.R.C. MH seat cover incl. carting

to the work site etc. comp. Directed. (Rates are

based on Central Store circular no. 01/2025

F.R.C. Extra Heavy Duty (EHD-35)

Manhole Covers & Frames Cover : 728mm ø &

100 mm thick circular cover, 35.00 MT load

design, 100x2mm MS flat allround, 16mm ø

plain round bar for lifting the cover & should

be fitted with plastic cups. Frame : 560 mm ø

clear opening, outer size- 888x888x175 mm.

On the upper periphery of frame 25 x 3 mm

wide MS flat should be well embed in concrete

to protect the edges of frame. FRC E.H.D.-35

manhole cover & frame described as above

( Only Cover ) F.R.C. Extra Heavy Duty

[EHD-35] Machinehole Covers & Frame-

b 2.00 560mm ø clear opening, The dimension of 3885.59 No.

frame and cover as Directed

( Only Frame ) F.R.C. Extra Heavy Duty

[EHD-35] Machinehole Covers & Frame-

c 2.00 560mm ø clear opening, The dimension of 3029.66 No.

frame and cover as per Directed

44 F.R.C. Heavy Duty [HD-20] Machinehole

(SET cover and frame) F.R.C. Heavy Duty

[HD-20] Machinehole Covers & Frames-

560mm ø clear opening, The dimension of

frame and cover as per mentioned in Amend

No.1 to IS 12592 : 2002 table

(Only Cover) F.R.C. Heavy Duty

[HD-20] Machinehole Covers & Frames-

B 2.00 560mm ø clear opening, The dimension of 3177.97 No

frame and cover as per mentioned in Amend

No.1 to IS 12592 : 2002 table 1 (Only Cover)

(Only Frame ) F.R.C. Heavy Duty

[HD-20] Machinehole Covers & Frames-

C 2.00 560mm ø clear opening, The dimension of 3029.66 No

frame and cover as per mentioned in Amend

No.1 to IS 12592 : 2002 table 1 (Only Frame )

45 F.R.C. Medium Duty [MD-10] Machine hole

(SET cover and frame) F.R.C. Medium Duty

[MD-10] Machinehole Covers & Frames-

560mm ø clear opening, The dimension of

frame and cover as per mentioned in Amend

No.1 to IS 12592 : 2002 table 1 (SET cover and

(Only Cover ) F.R.C. Medium Duty

[MD-10] Machinehole Covers & Frames-

B 2.00 560mm ø clear opening, The dimension of 2224.58 No.

frame and cover as per mentioned in Amend

No.1 to IS 12592 : 2002 table

(Only Frame ) F.R.C. Medium Duty

[MD-10] Machinehole Covers & Frames-

C 2.00 560mm ø clear opening, The dimension of 2076.27 No

frame and cover as per mentioned in Amend

No.1 to IS 12592 : 2002 table

F.R.C. Strom water Grating Set Grating (jali)

740 x 740 X 90 mm Square Jali. 20.00 MT

Load Design , 90 X2 mm MS Flat Around,

Frame : 600 X 600 mm clear opening, outer

size 900 x 900 x165 mm. om upper

46 5.00 periphery of frame 25 x 3 mm wide MS Flate 5173.73 No

Should be well embded in concrete to protect

the edge Frame comp.. As directed by engineer

in charge. (Rates are based on Central

Store circular no. 02/2024-25 Dt.

F.R.C. Strom water Grating Set Grating (jali)

690 x 690X 70 mm Square Jali. 20.00 MT Load

Design , 70 X2 mm MS Flat Around, Frame :

600 X 600 mm clear opening, outer size 800 x

800 x120 mm. om upper periphery of frame

47 1.00 25 x 3 mm wide MS Flate Should be well 4741.53 No

embded in concrete to protect the edge Frame

comp.. As directed by engineer in charge.

(Rates are based on Central Store

circular no. 02/2024-25 Dt. 14.10.2024)

F.R.C. Strom water Grating Set Grating (jali)

620 x 620 X 75 mm Square Jali. 20.00 MT

Load Design ,75 X1.2 mm MS Flat Around,

Frame : 500 X 500 mm clear opening, outer

size 770 x 770 x135 mm. om upper

48 1.00 periphery of frame 25 x 31.5 mm wide MS 4734.75 No

Flate Should be well embded in concrete to

protect the edge Frame comp.. As directed by

engineer in charge. (Rates are based on

Central Store circular no. 02/2024-25 Dt.

Filling in plinth with sand under floors

49 10.00 watering ramming, consolidating and dressing 455.53 Cmt

complete (R &B SOR 2023-24 Ahmedabad cit;

Item no. 4.24; 04007A Page no. 48)

Providing, laying, spreading and compacting

graded stone aggregate to wet mix macadam

specification including premixing the Material

with water at OMC in mechanical mix plant

50 carriage of mixed Material by tipper to site,

laying in uniform layers in sub- base / base

course on well prepared surface and compacting

with vibratory roller to achieve the desired

density as per Codal Provision.

a 10.00 Production & Supply of WMM 1975.00 Cmt

b 5.00 Laying of WMM 35.00 Cmt

Corrugated DWC HDPE pipes (Non-pressure

Providing and supplying,Lowering, Laying &

Joining of Class SN8 Structured Wall

polyentheiene piping systems (Pipe with

online/offline coupler and elastomeric sealing

ring) with non-smooth external annular

corrugated and smooth internal surface (Double

central taxes, transportation, freight charges,

octroi, inspection charges, loading, unloading,

coveyance to the departmental stores etc.

complete-Road Project Approved Rate

Drilling of 900mm dia Horizontal borehole for

watermain pipeline crossing under the road incl

in all strata with required lenth incl fixing of

52 800mm dia M.S/RCC casing pipe with pushing

etc complete various size for 406.4 to 508 mm

dia watermain (For 45 mt Length)

RCC Casing pipe in place of MS pipe+Water

Providing & Constructing Precast RCC

Manhole in RCC M-40 grade Controlled

concrete as per drawing, in OPC including

53 excavation, 80 mm thick P.C.C. in M 15,

Reinforcement in TMT-500, PVC Foot steps,

Providing & fixing FRC Manhole frame &

cover including inside epoxy paint complete etc.

For 300, 450 & 600 dia. Pipe(upto 4 m. depth)

1.00 (i) 1.2 dia x 2.0m Depth 39937.00 No

1.00 (i) 1.2 dia x 3.0m Depth 51514.00 No

For 300,450 & 600 dia. Pipe (More than 4.0 mt.

depth) & for 900 mm dia.pipe for any depth

0.00 (i) 1.5 dia x 4.0m Depth 69388.00 No

Constructing Scrapper Slab Type M.H.

Chamber of following size incl. excavation,

refilling, brick bats cement concrete (1:5:10) of

thickness 15 C.M., C.C. channel (1:2:4) of

thickness 10 C.M., finished 15 mm thick cement

plaster inside (SRC) & outside (only for shaft)

in C.M.1:3, finishing with cement slurry, P/F

54 mm dia M.S Steel HDPE coated steps 35 cm c/c

at 35 cm staggered Masonry in C.M. 1:5, RCC

slab in CC 1 : 1.5 : 3 of thickness 23 C.M,

including Cantering & reinforcement (double

jalli at 15 C.M c/c bothway 12 mm dia.) but

excluding the cost of Manhole seat cover etc.

completed (Inside Clear, M.H. length should be

parallel to the flow,

Extra rate over item of Constructing Scrapper

Slab Type M.H. Chamber of following size for

55 constructing M.H. Chamber,per 1.00 Decimeter

of additional depth or part there of etc.

complete. (inside) and depth from

For Pipe dia. <= 1000 mm

1.00 1.6 m x 1.6 m Manhole depth from 4.0 to 5. 0 m 663.71 DM

1.00 1.6 m x 1.6 m Manhole depth from 6.0 to 7. 0 m 682.65 DM

For Pipe dia. <= 1200 mm

1.00 1.8 m x 1.8 m Manhole depth from 4.0 to 5. 0 m 732.25 DM

1.00 1.8 m x 1.8 m Manhole depth from 6.0 to 7. 0 m 753.89 DM

Total Estimated Tender Rs.