PROVN OF GEYSER FOR JCOS NCOS ORS MD ACCN AGAINST DEFI AND OPEN SHED OF SIZE OF 29 x 22 FOR ARMR SHOP OF QM SEC FOR UTILIZATION AS ARMR REPAIR BAY AT IMA DEHRADUN.

Amount

S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit ISI marked not less than 25 mm dia in concealed / surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Rate for cutting chases and making good to the disturbed surface as per exisitng specifications are included in the quoted rate. 2 x 4Sqmm + 1 x 4 sqmm

S & F sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, including connection with suitable size copper lugs complete all as directed

Supply and fix Electric water heater vertical type ,storage type steel body with Stainless steel inner tank and heating element upto 2 kw capacity 25 ltr BEE 5 star rating complete with all acessories such safety valve ,thermostate,NRV ,connection pipe complete as per IS 2082 : 1993 all as specified and directed by GE.

S & F MCB SP 6 to 32 Amp , 240 volts 'C' Curve 10 KA complete all as directed and conforming to relevant IS of approved make.

M & L for Drilling and Tapping water mains ( in position) for branch connectionby inseting Tee as per site requirement including saddle piece and nuts and bolts.

Supply and Fix GI Tube medium grade 15mm bore dia with all fittings and fixed complete to wall and ceiling of laid under floors all as specified and directed.

Supply and fix Hot water pipe duly insulated with glass wool and alluminium clading 15mm bore dia complete insulation of pipe as conforming to relevent IS.

Supply and Fix plug type bib taps, cast copper alloy,chromium plated 15mm dia complete all as specified and directed of approved make.

Supply and Fix stop angle valve cast copper alloy, screwed down for iron pipe and fixed chromium plated 15mm dia complete all as specified and directed of approved make.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in any type of soil

Excavating in post holes ( or similar holes ) each n exc 0.5 cum, getting out hard dense soil , returning , filling in and ramming earth or brocken rubble mixed with earth around , in layers not exceeding 25 cm.

M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete all as specified.

M&L for hard core of brokenstone or of gauge exc 63 mm but n,exc 100 mmdeposit,spread and levelled in layers n.exc 15 cm thick,water and rolled /rammed to tru surface

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 bricks all complete all as specified.

M&L for Rendering 15mm thick in two layer (10+5 mm) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

M&L for preparation of new plastered or brick masonry surfaces of wall, applying two coat of cement base paint (snowcem) complete all as specified.

Providing cement concrete 1:2:4 type B-1(20mm graded aggregate) as in coping, foundation etc all as specified and directed by Engr-in-charge.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for roof trusses (framed) , trussed , purlins,crane gantries , rails and fastening and heavy bracket framing ( beam, tee, angle, channel or flat section) including distance pieces.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete all as specified.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in non rigid PVC Conduit concealed in surface of wall not less than 25 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular PVC l flush box and modular cover and frame for mounting modular switch, regulators etc complete for the following. Make of wire: Finolex, Havells, Polycabon Note: Point wiring & earth wire shall be connected to each & every sunken box.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 25 above but with stranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix modular switch 1 way 6A, 1 Module

Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp

Supply and fix modular socket 6A, 2/3 pin combined 2 Module

Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed.

Supply and Fix LED batten light fitting 4 feet of lumens 2500 lumens, wall mounted ,high pressure die cast alluminium, fully diffused ,system efficacy 125L/W ,polycarbonated diffuser,IP-20 ,high bright LED lamp, colour temp not less than 5700 Cool Day Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2.5KV including,connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose complete all as specified and directed .

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(one earthing for each DB )

S & F MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed of capacity, SPN, 12 Ways .

S & F MCB SP /SPN complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speification/ technical documents from OEM shall be provided at the time of bidding of following capacity:- MCB SPN 240 volts, 50 Hz of capacity 40 Amps

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core laid in 50 mm dia LDPE pipe in trench up 45 cm depth all as specified and directed

Supply and fix ceiling Fan complete with blades,down rods ,230 volts ,1200 mm sweep ,min air delivery 210 CFM with service value 6.00 BEE ,with Brushless direct current motor (BLDC) including taking down non BLDC fan and deposited to the MES store.

Mani Control System (BID ID -3369680)

PARADISE INFRA POWER COMPANY (BID ID -3368712)

RAMSONS DEVELOPERS (BID ID -3369428)

V r traders (BID ID -3369537)

Deven Associates (BID ID -3366761)

FORTUNE STAR (BID ID -3369947)

M/S SEWA AND SERVE BUILDERS (BID ID -3370284)

M/s RAM RATAN AND SONS (BID ID -3370331)

Bhanu Prakash (BID ID -3367156)

Meher enterprises (BID ID -3365489)