SPECIAL REPAIR/ REPLACEMENT OF BRANCH PIPE LINE, SERVICE LINES AND GATE VALVE AT BW LINES UNDER GE (E) BAREILLY

Amount

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in hard/dence soil for laying of under ground cable and foundation of poles complete all as specified and directed.

Returning, filling in, including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing of excavated soft/loose soil not exc 50 m & depositing where as directed at a level n.exc 1.5 m above from starting point complete all as specified and directed.

Supply & laying/fixing 3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size (a) PN-16, 32mm OD (SDR– 7.4) including taking out old rusted GI pipe of 25mm dia.

Supply & laying/fixing 3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size (a) PN-16, 63mm OD (SDR– 7.4) including taking out old rusted GI pipe of 50mm dia.

Supply & laying/fixing 3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size (a) PN-16,110mm OD (SDR– 7.4) including taking out old rusted GI pipe of 100mm dia.

Making connection of PP-R distribution branches with GI main of 80mm dia by providing and fixing PPR fitting tee 50 to 75mm bore including cutting and making fusion joint etc complete all as specified and directed.

Making connection of PP-R distribution branches with GI main of 32mm dia by providing and fixing PPR fitting tee 16 to 40 mm bore including cutting and making fusion joint etc complete all as specified and directed.

Making connection of PP-R distribution branches with GI main of 100mm dia by providing and fixing PPR fitting tee 100 mm bore including cutting and making fusion joint etc complete all as specified and directed.

S&F PPR gate valve (brass insert) of size 32 mm dia including connection and testing complete all as specified and directed including taking out old unserviceable gun metal gate valve 25mm dia.

S&F PPR gate valve (brass insert) of size 63 mm dia including connection and testing complete all as specified and directed including taking out old unserviceable gun metal gate valve 50mm dia.

S&F PPR gate valve (brass insert) of size 110 mm dia including connection and testing complete all as specified and directed including taking out old unserviceable gun metal gate valve 100mm dia.

M&L for construction of brick masonry valve pit of size 90x90x90cm (internal dimension) one brick complete all as specified and directed. thick wall built in CM (1:4) on 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation, and 15mm thick rendering in cement mortar (1:4) both externally and internally, external plaster shall be up to 15cm below GL, providing valve pit cover made of 3.15mm thick MS sheet/plate, including provision of hinges, handle and locking arrangement including 40 X 40 X 5mm angle iron frame fixed on top of valve pit by means of MS hold fast 40x5mm and 150mm long, embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including two coats of anti-corrosive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil including demolition of old unserviceable existing valve pit & pit cover complete all as specified & directed.

Note : Tenderers may note that amount of credit Rs 30,850.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

K.S.Traders

v v associates

SONI ENTERPRISES