Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC BLDG NO XXVIII 378A NORTH CHAMPANOOR ANGAMALI SOUTH P O PIN 683 573 | ANGAMALI | ERNAKULAM | KERALA | 683573 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹12.7 L+₹65,920 (5.49%)Rejected-Finance 18 837 KILIYARAA HOUSE PERUMPADAPPU PALLURUTHY PO KOCHI 682 006 | KOCHI | ERNAKULAM | KERALA | 682006 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹13.1 L+₹1.1 L (8.83%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹15.9 L+₹3.9 L (32.4%)Rejected-Finance KORAMANGALATH HOUSE TOMY LANE SOUTH PANAMBILLY NAGAR KADAVANTHRA P O KOCHI 682 020 | KOCHI | ERNAKULAM | KERALA | 682020 | L4 | Rejected-Finance Not Being Lowest |
Tender Value
₹16.5 L
EMD Value
₹33,000
Closing Date
5 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
MISC REPAIRS TO CONCERTINA COIL, PLINTH PROTECTION, HARD STANDING PATHS ETC AT INS DRONACHARYA UNDER AGE B/R-I OF GE FORT KOCHI
2024_MES_636051_1
8986/E8/GE_FORT_KOCHI
Open Tender
Civil Works
Item Rate
270 days
FORT KOCHI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE FORT KOCHI
₹33,000
Yes
6 Apr 2024
6 Jan 2024
7 Feb 2024
6 Jan 2024
5 Feb 2024
22 Jan 2024
Amount
Demolition of PCC (un re-inforced) of any description and in any position not otherwie specifically provide for plinth protection and drain etc. complete all as specified and directed and removal of rubbish out of MoD land.
M&L for Plain Cement Concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filing and mass concrete etc. complete all as specified and as directed.
M & L for 100 mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) .etc furnished even and fair complete all as specified & directed.
M & L for 100 mm Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) .etc furnished even and fair complete all as specified & directed.
M & L Hard core broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick and watered and rammed to a true surface complete all as specified and directed.
M&L PCC 75 mm thick, 1:3:6 (Type C1) using 20mm graded crushed stone aggregate as in plinth protection and finishing cement concrete surface even and smooth w/o using extra cement etc. complete all as specified and directed. Note:PCC shall be laid in alternate panels n exc 2 sqm
Forming 6 mm wide joints throughout the thickness at every 3 m or change in direction, filled with mastic filling 1:3 (bitumen & sand)/sealing compound grade 'A' etc. complete all as specified and directed.
Dismantling floor including paver blocks, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including Carefully taking up or down and removing without damage, in case of dismantling, as defined .etc complete all as specified.
Renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete etc. complete all as specified and directed.
M & L for 6.30 mm and below graded coarse aggregate deposited,spread and levelled in layers not exceeding 15 cm thick ,rolled to a true surface complete all as specified.
Fixing only machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness,M-35 grade fixed with grey cement and no pigments .etc complete all as specified.
M&L machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60 mm thickness,M-35 grade fixed with grey cement and no pigments etc. complete all as specified.
Providing cement concrete type B0 1:2:4 (12.5 mm graded stone aggregate) as in kerbs,mud stops ,rounded or chamfered on edges complete all as specified and directed. Note: The rates include for use of formwork
M&L 20 mm thick screed bedding layers in cement mortar 1:4 for laying kota stone in stairs/cooking platform complete all as specified and directed.
M&L for heavy duty designer paver tiles, 20 cm x 20 cm x 25 mm thick, set, jointed and pointed with neat cement slurry in floors fixed with white cement and pigments. Note : Colour and pattern and size to be approved by GE.
Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed and removal of rubbish out of MoD land.
M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement etc. complete all as specified and directed.
Demolition of brick masonry built in cement mortar or cement lime mortar etc. complete all as specified and directed and removal of rubbish out of MoD land.
M & L precast cement concrete block masonary with solid blocks ,exc. 10 cm in width and setting in CM 1:6 type C1 1:3:6 (20 mm graded stone aggragate) etc. complete all as specified and directed.
Labour only for precast cement concrete block masonarywith solid blocks ,exc. 10 cm in width and setting in CM 1:6 type C1 1:3:6 (20 mm graded stone aggragate) etc. complete all as specified and directed.
M&L PCC 1:2:4 type B1 (20 mm graded aggregate) as in copings, water troughs and the like including weathering, slightly rounded chamfered angles and throating etc. complete all as specified and as directed. Note : The rates include for use of formwork
M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in bed blocks for fixing hold fasts etc. complete all as specified Note : The rates include for use of formwork
S&F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to wall/floor etc including taking down old unserviceable pipe all as specified and directed.
S&F 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to floor etc including taking down old unserviceable pipe all as specified and directed.
S & F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps including taking down old unserviceable pipe all as complete all as specified.
S & F 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps including taking down old unserviceable pipe complete all as specified.
M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Proffesional pack of Asian paints) over a coat of external wall care piutty n.exc 2 mm thick on new plastered external surfaces and including scafoldings and cradles including hoisting and lowering as required with bracing , support etc. complete all as specified and directed.
M&L for making surface good with two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Proffesional pack of Asian paints) over a coat of external wall care piutty n.exc 2 mm thick on old decorated/ treated surfaces of external wall (shaft) by complete removal of existing treatment by scrapping , washing , rubbing down and stopping of surfaces of wall and including use of scaffolding and cradles including hoisting and lowering as required with bracing , support complete all as specified. and including scafoldings and cradles including hoisting and lowering as required with bracing , support in any portion and any height including leakage arrest in pipes using chemical compound complete all as specified.
M&L PCC 1:3:6 (Type C1) using 20mm graded crushed stone aggregate as in surface channels and drain etc. complete all as specified and directed.
Cleaning the existing covered drains (after removing the RCC covers) of width exceeding 250 mm and not exceeding 500 mm by clearing all rubbish silt and vegetation (Average depth 150 mm)removing and depositing the debris to a distance not exceeding 150m and refixing the covers to its original position complete all as specified and directed and removal of rubbish out of MoD land.
Cleaning the existing drains of width exceeding 250 mm and not exceeding 500 mm by clearing all rubbish silt and vegetation (Average depth 150 mm)removing and depositing the debris to a distance not exceeding 150m complete all as specified and directed and removal of rubbish out of MoD land.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
S & F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, zinc coating at 12-18 micron, dipped with bitumen paint for metal corrosion resistant before fixing each including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, (each line wire to be measured) etc. complete all as specified and directed.
Restraining, resecuring including making good staples etc. for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins (each line wire to be measured) as in repair etc. complete all as specified and directed.
Dismantling barbed wire etc. complete all as specified and directed.
Dismantling wrought iron or mid steel work of any description not otherwise provided for etc. all as specified and as directed.
S & F for framed balusters; walk ways; railings; y brackets , posts etc , puching drilling holes without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde E- 250) quality A etc. complete all as specified and as directed.
M & L for 1000 to 1200 mm outer dia Punched concertina coil hot dipped galvanised coil high strength made out of not less than 2.50 mm dia spring steel core having zinc coating at 12-18 micron, dipped with bitumen paint for metal corrosion resistant before fixing each coil having a min 50 turns, average wt 15 kg per coil including handle and spikes at both end of coil, fixed on top of compound wall and tied to barbed wire and angle iron post with suitable binding GI wire, complete all as specified and directed.
Labour only for Restraining, resecuring including making good staples etc. for punched concertina coil in any size hot dipped galvanised coil high strength made out of not less than 2.50 mm dia spring steel core and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.
M & L for preparation of new steel surface over 10 cm width or girth and applying two coat of VX polymer based anti corrosive paint over a coat of anti corrosive primer etc. complete all as specified and as directed.
Anaswara Constructions
JESWIN BUILDERS
K.V.GEORGE AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .