WBPWD/AE/BHESD/ELEC/NIQ- 05/25-26

Amount

SITC of LED illumination sign board fabricated by 26’×5’ (ft) × 4” (inch) depth ACP box supported with 1"×1" MS hollow square pipe of 18 swg all around. The 3 mm ACP facial should be provided with Laser cutting 6 mm thick acrylic letters out of which 3 mm rising from the surface of the ACP board. 6 mm letters should be fixed on another 3 mm acrylic sheet on back side of the ACP facial. Border line of the front portion and back portion should be covered by 1.5” Aluminum channel as per the direction of EIC. The sign board should be glow from back side of letters by 1.5W/2.0 LED 2/ 3 / 4 module cool white in colour( Make as per direction of EIC) and LED must be covered in box made of 3 mm thick sun board. 4” with part of the four side of board should be covered by ACP after bending excess part from front side. Back side of the board should be covered with 22 swg AIu. sheet protect rain water. The sign board should be fixed on existing position of the premises with suitable supporting arrangement on Concrete Pillars and mending good damages as per direction of EIC. Colour and make of APC & letter will be as per direction of EIC. The cost of transportation and scaffolding charges are included. The sign board should be as per the following inscription as per direction of EIC – Probably to be provided (I) national emblem. (II) State logo. etc. beside these the probable (actual as per authority approval) Supply & fixing of SMPS /LED light Driver(As Per Original Requirement) input 240 Volt and Output 12 Volt make Korea/ Union Rohos/ others etc. EIC approved with supply and laying of Internal wiring for connection by 20 mm. dia PVC Rigid conduit pipe (Precision make) 1.1 KV grade PVC insulated multistranded copper wire of 3 x 1.5 sqmm PVC cable approved make -- Finolex/ RR Kabel/ Gloster etc. Fixing of the LED signage board supported with MS angle iron of 50 x 50 x 6mm and MS flat of 50 x 6mm from back side and bottom side of the wall/supporting structure along with necy. nos. nut-bolts, washers, screws, clamp etc. including fabrication, welding, necessary painting incl. scafolding arrangement as per direction of EIC.

(Rates should be Quoted inclusive of all taxes & duities )

R L COMPANY (BID ID -6621842)

R D ENTERPRISE (BID ID -6624137)

ELECTROTECH (BID ID -6612584)

MAHALAKSHMI ENTERPRISE (BID ID -6663323)

A. B. ELECTRIC AND SOUND (BID ID -6663136)

R.R. ENTERPRISE (BID ID -6637383)