483/22-23, 782/20-21 Providing re-electrification in the Anganvadi, Ward committee office and Community Hall in Mudavanmugal ward

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory Conduit of minimum size 20mm conforming to IS 9537 Part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade including providing switch board main and continuous earthing with 1.5 sqmm green coloured FR wire required quantity of copper earth socket, brass bolt and nuit crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type ROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.(ROHS Complaint modular accessories)

Single control light point with 6A, 3 plate ceiling rose.

90.2.1.2 Twin control light point with 3 plate ceiling rose.

90.2.1.3 Single control light point without ceiling rose

90.2.1.4 Single controll ceiling fan point with 6A.3 plate ceiling rose and with socket typepped electronic regulator

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points

Independent plug

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required. 25 mm dia with HG company fabricated clamps

(MR1183) 36/40 W 4000 lumen LED, IP66 street light fittings with Aluminium housing stove enameled CRCA sheet, Steel reflector cover, acrylic cover complete with THD <10%, power factor>0.98, RoHS complaint duly wired up for use on 230 V ac supply

Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

Supply conveyance, installation, testing and commissioning (Havells/Philips/Bajaj) make recessed mounted, copmact vertical, round shaped down lighter with removable driver suitable for low ceiling lights 15W LED 4000K(white)

Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. 1200 mm 1X20W LED Lamp with box type fixture

Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. 1200 mm 2X20W LED Lamp with box type fixture

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. 1200 mm sweep (category B) 5 star rated.

Conveyance installation testing and commissioning ceiling fan of all sizes using standard accessories excluding resistance type regulator wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or extending the original wiring etc. as required.

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

(90.6.4.12)1.50 sqmm 2 run

(90.6.4.13) 1.5sq mm 3 run

(90.6.4.16) 1.5 sq.mm. 6 run

(90.6.4.22) 2.50 sq.mm. 2 run

(90.6.4.32) 4.00 sq.mm. 4 run

(90.6.4.44) 6.00 sq.mm. 4 run

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 sq mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 sq mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. Module (125 x 125mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 Amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 Amp switch.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supply and drawing bare copper conductors of the following sizes along the wiring cables and giving connections etc as required. 3.15.00mm copper conductor (14 SWG)

Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised alumi8nium body, epoxy powder coated, heat resistant prismatic glass cover suitable for 9 W CFL to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheather 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required

Supplying and fixing following pre wired TP&N , MCB distribution board of sheet steel for 415 volts, on surface/recess complete with loose wire box, terminal connector for all incoming and outgoing circuits duly pre wired with suitable size FRLS PVC insulated copper conductor upto terminal blocks, tinned copper bus bar neutral link earth bar detachable gland plates intetconnections powder painted including earthing etc required (but without MCBI/RCCB/Isolator) 6 way (4+18 ) double door

Supplying and fixing following way single pole and neutral sheet steel MCB DB 240V on surface/recess complete with tinned copper bus bar neutral bus bar earth bar din bar intetconnections powder painted including earthing etc required (but without MCBI/RCCB/Isolator) 16 way double door

Supplying and fixing following way single pole and neutral sheet steel MCB DB 240V on surface/recess complete with tinned copper bus bar neutral bus bar earth bar din bar intetconnections powder painted including earthing etc required (but without MCBI/RCCB/Isolator) 8 way double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel MCB distribution board 415 volts,on surface/recess, complete with tinned copper bus bar, common neutral link, earth bar, din barfor interconnections, powder painted including earthing etc. as required. (but without MCB/RCCB/Isolator) 4 way (4+18 ) double door

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supply and fixing following ratings 3 pole (three phase and netural( 415V residual current circuit breaker (RCCB) having a sensityvity current upto 300mA in the existing MCB DB complete with connections tsting and commissioning etc as required 63A

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps

Supplying and fixing following rating, double pole, 240 volts, residual current circuit breaker (RCCB) having a sensityvity current upto 300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

or Supply and fixing angle/ straight brass lined skirt type , bakelite batten holderwithout shade and giving connections with 10 W LED bulb.

MR 1302 Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc, as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS, 305 mm sweep 1400 rpm Heavy duty exhaust fan working on 230V AC.

MR 1195 200mm sweep light duty exhaust fan in plastic body with self opening lowers working on 230V single phase A/C supply.

Conveyance installation testing and commissioning exhaust fans of size upto 450 mm in the existing opening fixing necessary anchor boltd/ bolt and nuts etc. as required including giving connections with the supplied wire along with the exhaust fan.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc as required (in ordinary soil)

3.15.00mm copper conductor (14 SWG)

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of following size suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment knock out for cable entry and exit. 600x300x214mm

S&F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following ratings. 63A

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of following size suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment knock out for cable entry and exit. 450x300x214mm

S&F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following ratings. 32A SP SDF AC23 TPN SDF

or supply and fixing the following accessoried in the existing meter board and goving connections etc. 63A 415V DIN type fuse base.

63A 415V Backlite fuse fittings.

63A 415V 2 way netutral link mounted on DMC/SMC base.

32A 415V 2 way netutral link mounted on DMC/SMC base.

Amount remitted to KSEB for obtaining Power supply (actual amount will be reimpersed on prodution of original receipts)

SURESH T