Road repair works and construction of compound wall at KINFRA Small Industries Park, Kasaragod

Amount

Construction of compound wall

Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 nominal size)

Laterite masonry with neatly dressed laterite stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.

Laterite masonry with neatly dressed laterite stone of size 40x20x15cm or nearest size in cement mortar 1:6 for superstructure above plinth level upto floor two level including all cost of materials, labour charges etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level : 1:1.5:3 (1 Cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, etc, and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

12mm cement plaster of mix 1:4 (1 Cement : 4 fine sand)

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces . Two coats

Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc

Road works

Supplying and stacking 36mm size hard broken stone in standard heaps for measurement

Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

Supplying and stacking 6mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface

Providing pre mix bitumen levelling coarse having thickness between 20mm and 40mm with 12mm departmental by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen (vg 30) with pressure sprayer at the rate of 48kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roller and other sundry stores

Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom

Providing, laying and rolling of open graded premix carpet of 20 mm thickness with 0.27 cum of 12 mm departmental aggregates premixed with 12.96 kg of bitumen per 10 sqm using penetration grade bitumen to required line, grade and level on a previously prepared base, after priming the existing surface with 5 kg of bitumen (VG 30) 10 sqm including mixing in a suitable plant, laying and rolling with a three wheel static roller of 80-100 KN capacity, finished to required level and grades, followed by a seal coat of 0.09 cum of 6 mm departmental aggregates premixed with 8.64 Kg of bitumen per 10 sqm.By manual means

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. the finished surface to be level, uniform and free from streaks and holes

Maintenance of Earthen Shoulder (filling with fresh soil) making up loss of material/irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment.

abdul javad m

JAFAR SADIK M

JASIR CA

VITTAL CONSTRUCTIONS

SIVA SHANKARA M.G

SQ Engineering Contractors Pvt. Ltd