Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹43.3 LAccepted-AOC | 1 | Accepted-AOC Award of Contract | |
| 2 | 2₹47.8 L+₹4.0 L (9.06%)Rejected-Finance | 2 | Rejected-Finance Not Being Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
9 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
INTEGRATED COMPREHENSIVE AND WELCOME MAINT OF OFFICER MARRIED ACCN IN AGE B/R-II UNDER GE (NORTH) AHEMDNAGAR
2024_MES_645659_1
8837/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (North) Ahmednagar
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineers (North) Ahmednagar
₹98,000
Yes
10 May 2024
8 Mar 2024
11 Apr 2024
8 Mar 2024
9 Apr 2024
27 Mar 2024
Amount
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Demolition of cement concrete(un-reinforced) in ground floor & paving n.exc 15 cm thick below or above ground level
M & L for preparation of newly plastered surface of wall and apply two coats of OBD over a coat of primer any height including scaffholding etc complete all as directed.
M & L for preparation of newly plastered surface of wall and apply three coats of white wash any height including scaffholding etc complete all as directed.
M & L for preparation of newly plastered surface of wall and apply two coats of cement based paint any height including scaffholding etc complete all as directed.
M & L for preparation of newly plastered surface of ceiling and apply three coats of white wash any height including scaffholding etc complete all as directed.
M & L for preparation of old plastered surface of wall and apply one coats of cement based paint any height including scaffholding etc complete all as directed.
M & L for preparation of old plastered or unplastered surface of walls including cornices etc by brooming down or steel wire brushing scraping down smook soot,moulds,moss and efflorescent salt,trading oil and greasy spots and apply one coats of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge..
All as per item No 8 (here-in-before) but on ceiling.
M & L for preparation of old plastered surface of walls and apply one coats of OBD,finished with roller finish on plastered surface of wall any height including scaffholding etc complete all as directed.
M & L for preparation of old plastered treated surface of walls by brooming down and apply one coats of wheather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces complete all as directed.
M & L for complete removal of old distempered and painted surface of walls and apply two coat of luster (any tint) over 3 mm thick layer of wall care putty & a coat of suitable primer complete all as specified and directed.
M&L 2 mm thick wall care putty on wall (One layer)
M&L 2 mm thick wall care putty on ceiling (One layer)
M&L for preparation of old surfaces of wood of any description exc 10cm width/girth incl cleaning applying one or more coat of french polish all as specified directed by Engineer-in-charge.
M&L for preparation of old painted Wood or wood based surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed.
All as per item No 16 above but on Steel or Iron surfaces without roller finish.
Taking down chowkats or frames not exc 1.5 Sq m but with shutters (without taking off shutters from the frames) all as directed.
All as per item No 18 above but exc 1.5 Sqm but not exc 4 Sq m.
Taking down shutters of any description not exc 1 Sq. m each all as directed.
All as per item No 20 above but exc 1 Sqm but not exc 2 Sq m.
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, all as directed.
M&L for 32 mm Mild steel Chromium plated curtain rods with end brackets and fixing stand/globe of choice,of same material,heavy duty all as directed by engineer-in-charge.
Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face
S&F18/19mm thick colour PVC Prelaminated board fixed to timber frame work as in cup board shutter/Shelves palmet box and similar items fixed in repair complete all as specified and directed.
S&F for 12 mm thick Vennered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work for cupboards of bedroom/kitchen
Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm
Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised as in cupboard shutter 30 mm
Supply and fix aluminium anodised handles of extruded section 150mm long.
Supply and fix 40mm dia cupboard knobs fixed with nut, screws and washer of brass, polished fixed in repairs.
Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long.
Supply and fix aluminium anodised barrel tower bolt of extruded section 75mm long.
Supply and fix IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge
Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including decorative skin 1.00 mm thick etc complete all as specified and directed by Engineer-in-Charge
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
S&F galvanised MS wire cloth 0.56 nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples
Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge
M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
S & F powder coated aluminium frame for fixing doors, windows, ventilaters with one or more rebate with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge
S&F for powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified
Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:3 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed inclucing taking down existing slab and disposing outside MD land.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar sitution all as directed
Material and labour for machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed inclucing taking down existing slab and disposing outside MD land.
Supply and fix in repairs stainless steel kitchen sink matt finish with draining over all size 915 X 510 mm and bowl size 510 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap complete all as specified and directed.
M&L for Steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed by engineer-in-charge
S&F In repair galvanised MS wire cloth 0.56 nominal dia of wire & average width of aperture 1.00mm & fixed with tinned tacks or galvanised wire staples
S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality.
S&F in repairs PVC Seat Cover with hinges complete all as specified.
S&F in repairs corner glass shelf 200mm size
S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas specified
S&F in repairs Soap Dish wired type all as directed.
Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane including Hacking out Old broken glass etc all as directed.
Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each paneetc all as directed.
S&F in repairs looking mirror of size 800 mm X 600 mm etc complete all as specified and directed by Engineer-in-charge.
Preparation of new steel and iron surfaces, of any description, over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide primer
Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed.
Supply and fix 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.
Supply and fix in repairs 15 mm dia pillar tap(Swine neck), cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.
Supply and fix in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.
Supply and fix in repairs bib tap(long body), 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.
S&F in repairs fancy type twin (Two way) bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC flexible 32 mm waste pipe for WHB,Sink etc complete all as specified.
S&F in repairs Sink coupling PTMT(half or full threated), with rubber washer etc complete all as specified. Minimum weight 32mm-45Gms/40mm-60Gms
Supply and fix in repair stop valve/angle cock/two way cock, 15 mm dia, cast copper alloy,screwed down high pressure screwed down high pressure with cruitch or butterfly handle screwed both ends for iron pipe or for unions all as directed.
S&F in repair PVC (SWR) 110mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps etc complete all as specifed and directed.
.-Ditto- as per item no 67 above but as in trenches or floor
S&F in repair PVC (SWR) 75mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps etc complete all as specifed and directed.
.-Ditto- as per item No 69 above but as in trenches or floor
S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed
S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed
S&F PVC (SWR) junction single, (Single T) equal or un equal 110mm bore
S&F PVC (SWR) junction single, (Single T) equal or un equal 75mm bore
S&F PVC (SWR) junction single, (double Y) equal or un equal 110mm bore
S&F PVC (SWR) vent cowl110mm bore
Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed.
Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed.
S&F fix in repairs wash hand basin with pedestal vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs vitreous china wash down water closet (Pedestral pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device etc complete all as specified and directed by Engineer-in-Charge connecting to P or S trap etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs vitreous integrated one peice floor mounted china wash down water closet (Pedestral pattern) white as approved by GE including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device etc complete all as specified and directed by Engineer-in-Charge connecting to P or S trap etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs ceremic table top wash hand basin vitreous China, as approved by GE,including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap all as directed.
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed
Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth with 3 mm thick wall care putty on walls all as specified and directed.
Preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk white primer on walls
Taking up or down steel tubing and connections,15 mm bore
All as per item No 86 but 20mm bore
S&F of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings.
All as per item No 88 but 20mm outer dia etc
Supply and fix 15 mm bore Tubes medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors
-ditto- as item no 90 above but 20 mm bore
Supply and fix in repair telephonic hand shower with flexible tube wall mounted / hooked all as directed.
Supply and fix in repair health faucet with 1.5m tube & hook cat No BEA-84 of prayag polymers pvt ltd & all as directed.
Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed.
Supply and fixing PVC mirror cabinet all as directed.
S&F in repairs PVC connections of Hot and cold water through 15 mm size with Stainless steel Nuts of length 600mm all as directed.
S&F for stainless steel grating without waste holes 100 mm dia all as directed.
S&F for stainless steel grating with waste holes 100 mm dia all as directed.
S&F in repair wall mixture, with provn for hand/overhead shower all as directed
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.
M&L for 30-40mm thick rough dressed Shahabad stone as in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed
Fixing only 30-40mm thick rough dressed Shahabad stone as in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 including dismantling complete all as specified and directed
M&L for coloured glazed ceramic tiles digitally printed 300x450mm, 7-8 mm thick as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.
Material and labour for joint free / rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile 400x400mm , as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.
M&L for joint free anti skid ceramic coloured tiles 300x300mm 7-8mm thick matching to dado tiles area of each tile, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.
M&L for Virified Ceramic tiles dark shed/Double Charged/ultrachared 10 mm thick (square/rectangular) polished, Size of each tiles 600X1200mm, in floors etc. laid over and including roughning existing surface, making good the damaged surface, levelling and fixing with cement based tile adhesive (make FOSROC, DR FIXIT) as per the manufacture's instructions and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed by Engr-in-Charge.
M&L for joint free / rectified vitrified/ ceramic coloured tiles 8-10 mm thick as approved by GE (square /rectangular) area of each tile 600x600mm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6 ) set and jointed with white or coloured cement to match the shade of tile etc complete all as specified and as directed
All as per item No 107 but as in dado/skirting on vertyical surfaces over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.
Material and labour for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and no pigment ,any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed.
M&L for roofing tile,manglore pattern interlocking at sides joints laid dry
All as item no.110 but except manglore pattern tiles
M&L Ridge or hip tiles to suit manglore pattern of roofing tiles,bedded and jointed in cement mortar 1:6
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge all as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screwsaas specified etc all as directed.
Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as directed.
M&L for Cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified by Engr-in-charge., etc Note:- The quoted rate shall include dismantling and refixing of water tank and check float valve refixed or provide new as applicable as etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve,high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and directed.
All as per item No 117 above but 1000 ltrs all as directed.
M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.
M & L for providing water proofing treatment on roofs, as per manufacturere's instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge
(a) Cleaning the newly plasterd surfaces with wire brushes and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface.
(b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint.
Material and labour for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mied with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement.
S&F in repairs Steel Pulley operated cloth drying system, aluminium anodised 20 mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4mm dia HDFE double core & fittings material etc complete all as specifed and directed
M&L for RCC 1:2:4 (Nominal Mix) B-1 (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete
M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to
Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage
M&L for point wiring complete concealed type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn through and including PVC rigid conduit not less than 20 mm dia with its accessories with Flush mounting modular metal boxes (upto 18 module suitble for Mylinc series of Legrand with and including white plates with frame upto 18 module of make suitable for Mylinc Series) for fixing switches/socket/regulators etc with and including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Wiring shall be done as per complaints received from user 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc
One light point controlled by switch 5 Amp single pole one way
One fan point controlled by switch 5 Amp single pole one way
One bell point controlled by switch 5 Amp single pole one way on independent board
One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
One light point controlled by switch 5 Amp single pole two way
All as per Item No 128 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 18 module suitble for Mylinc series of Legrand including white plates with frame upto 18 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc
One light point controlled by switch 5 Amp single pole one way
One fan point controlled by switch 5 Amp single pole one way
One bell point controlled by one switch 5 Amp single pole, one way on independent board
One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
All as per Item No 136 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
S&F Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge
S&F Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-Charge
S&F bell push piano flush, single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
S&F bell ding dong elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.
S & F electronic dimmers,as per existing wattage, 250V flush type on the exiting phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Switch, 16 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Socket Outlet 6 Amp, 3 pin, combined two module etc as per existing complete all as specified and directed by Engineer-in-Charge.
S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module as per existing etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
S&F Socket outlet ,3 Pin ,6 A etc complete all as specified and directed by Engineer-in-Charge
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,Concealed in wall protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.
Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.
Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fixing MCBs, SPN, AC, 240 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Taking out old PVC/Wooden/metal switch board ,wire connection from the wall and fix new PVC Modular box including connecting wire suitable for fixing switch/Socket/fan regulater of following sizes .(Note.Damaged Switch/Socket/regulator will be measured and paid Seperately)
(a) 100 x100x 50 mm
(b) 100 x175x 50 mm
(c) 200 x150x 50 mm
(d) 250 x200x 50 mm
(e) 350 x300x 50 mm
Supply and fix Decorative ultra slim square profile LED lighting fixture with extruded metal batten with refreshing design, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 22 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix 10 Watt LED batten with square profile with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge
S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit 10 W LED luminaire comprising of high brightness LEDs complete with all accessories prewired and including connecting up with & including twin core twisted flexible copper conductor cable of suitable size etc complete all as specified and directed by Engineer-in-Charge
Supply & fix replacemnt industrial type switch socket for Geysers with 20 Amp MCB etc complete all as specified and directed by Engineer-in-Charge
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 2.5 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding must be utilize for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 2.5 sq.mm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit
Taking out/down carefully and opening of existing water Geysers of 25 Ltrs capacity,from any position, of any make etc & refixing after reassembling and after repair /replacement of spare parts/ material/items ( such as outer and inner tank) at the desired location and making necessary water inlet, outlet & electric connections to make it functional with including using material/parts of minor nature such as screws, insulation tape, nuts, bolts, washers etc including cleaning and painting with spray painting to required gloss with white synthetic enamel paint on complete body & writing MES No with black synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement element 2 KW, rubber gasket type with & including rubber gasket complete suitable for 25 Ltrs Geysers of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement PVC insulated cable 40/0.0076, 3 core copper conductor cable for connection from geyser to top plug etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement indicator lamps(set of two -green & red) AC, 220 volts suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement thermostat switch , pointer type with adjustable knob, suitable for 25/50 ltrs capacity vertical type geyser & etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix PVC connection pipe for Geysers complete with brass end terminal size 300 mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix PVC connection pipe for geysers complete with brass end terminal size 450 mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fixing in replacement thermal cut out suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge.
Taking out/down existing ceiling fans upto 1400 mm sweep,from any position, of any make etc and handover to user to deposit E/M Store yard & refixing Serviceable fan at the desired location making electric connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length with & including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement capacitor 2.5 mfd, 250 volts , AC etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of rubber reel, bolt, nut including pin etc complete all as specified and directed by Engineer-in-Charge.
Supply only conopy (top and bottom) of ceiling fan , of any sweep, any make etc complete all as specified and directed by Engineer-in-Charge.
S & F for modular plates white colour with frame of 3 module including removal of old unserviceable one complete complete all as specified and as directed
S & F for modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and as directed
S & F for modular plates white colour with frame of 8/10 module including removal of old unserviceable one complete complete all as specified and as directed
S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed
S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed
S & F blanking plates round/square in wall for fixing Ceiling roses,etc as specified and as directed
Ms. M.D. Auty
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .