REVIVAL OF SCOUR POINTS OF TWSS

Amount

Revival of Scour Points

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

100.98.1008:Engaging Coolie.

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

10.17:Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

19.15.1:Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) as per standard design.With 20x20 mm square bar

Servicing of Valve Joints

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

OD25434/2024-2025:Replacing Damaged/Rusted Nut and Bolts of flanged joints up to M12 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD25435/2024-2025:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M12 to M16 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD25436/2024-2025:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M16 to M22 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD25437/2024-2025:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M24 to M30 and size up to 150mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

OD25438/2024-2025:Replacing Damaged/Rusted Nut and Bolts of flanged joints from M30 to M36 and size up to 200mm (Grade up to 8.8) by Galvanized Nut and bolts without disturbing existing joint including bolt removing charges, cutting-grinding-cleaning charges, cost of all materials (nut, bolt, washer etc.), labor charges, hire charges of tools and plants etc. complete.

14.46:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

R S SAJITHRAJ (BID ID -2126410)

Bidder Name

R S SAJITHRAJ

P ANIL KUMAR