Kerala

Technical Eval

Works

Civil Works - Buildings

GENERAL-RT KOTHAMANGALAM-RETROFITTING - RT KOTHAMANGALAM-CIVIL WORKS-General Civil Work

Kerala State Housing Board

Revenue tower kothamangalam | Ernakulam, Kerala

Amount: ₹33.7 LCloses: 9 Sept 2026Closed

Timeline

Published1 Sept 2026
Closed9 Sept 2026
Technical Evaluation15 Sept 2026
Award—

Bids

1 Bid15 Sept 2026

#	Company	Status
1	NAUSHAD PS Accepted-Technical	Accepted-Technical L1

Tender Value

₹33.7 L

EMD Value

₹50,000

Closing Date

9 Sept 2026, 5:15 pmClosed

Tender Inviting Organisation

Name

Executive Engineer KSHB Ernakulam Division

Address

KSHB Ernakulam Division Revenue tower 5th Floor

Work Description

KSHB Ernakulam Division Revenue Tower Kothamangalam Retrofitting RT Kothamangalam Civil Works General Civil Work

Tender Information

Tender ID

2026_KSHB_862331_3

Reference Number

01/2026-27/KSHB/EKM

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

Revenue tower kothamangalam

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

RequiredBIDDOCUMENT (.pdf)

RequiredADDITIONAL DOCUMENTS (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

EMD Fee Amount

₹50,000

Important Dates

Last Activity

15 Sept 2026

Published

1 Sept 2026

Bid Opening

11 Sept 2026

Download Starts

1 Sept 2026

Download Ends

9 Sept 2026

Submission Starts

1 Sept 2026

Clarification Period

1 Sept 2026 - 9 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (65 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Site Clearance and Demolition Works
1.001	15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm	1	sqm	-	-
1.002	15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)	1	cum	-	-
1.003	14.78:Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.	-	sqm	-	-
1.004	OD107776/2026-2027:Removal of sand from sunken portioin of toilets by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated material lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.	-	cum	-	-
1.005	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	-	each	-	-
1.006	OD107775/2026-2027:Engaging Labour For Cleaning of common area and office space portion and clearing of drainage line etc. complete as per the direction of engineer in charge	-	Day	-	-
1.007	15.60:Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved	-	cum	-	-
2Building and Toilet Maintenance
2.001	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	-	kg	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

BOQ_1467757.xls

BOQ • 0.35 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

NAUSHAD PS

Accepted-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Site Clearance and Demolition Works
1.001	15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm	1	sqm	-	-
1.002	15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)	1	cum	-	-
1.003	14.78:Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.	-	sqm	-	-
1.004	OD107776/2026-2027:Removal of sand from sunken portioin of toilets by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated material lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.	-	cum	-	-
1.005	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	-	each	-	-
1.006	OD107775/2026-2027:Engaging Labour For Cleaning of common area and office space portion and clearing of drainage line etc. complete as per the direction of engineer in charge	-	Day	-	-
1.007	15.60:Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved	-	cum	-	-
2Building and Toilet Maintenance
2.001	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	-	kg	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Site Clearance and Demolition Works

1.001

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

sqm

1.002

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)

cum

1.003

14.78:Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

sqm

1.004

OD107776/2026-2027:Removal of sand from sunken portioin of toilets by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated material lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

cum

1.005

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

each

1.006

OD107775/2026-2027:Engaging Labour For Cleaning of common area and office space portion and clearing of drainage line etc. complete as per the direction of engineer in charge

Day

1.007

15.60:Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

cum

2Building and Toilet Maintenance

2.001

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)