80 KADAMBARA LEKSHAM VEED COLONY ROAD RE TARRING WARD 14 RETENDER

Amount

Retarring

5.2.1a : Tack Coat<br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

5.5.B.2a : Modified Penetration Macadam 75 mm thick using Bitumen S-65 <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. <br> (B) 75 mm thick :- (II) Bitumen (S-65)

75.5.9.1.2Z : 20mm thick Open-Graded Premix Carpet using Bitumen S-65 and Antistripping Agent <br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. <br> Case - I By Manual Means <br> (II) Bitumen (S-65)

75.5.12.A.3.2Z : Seal Coat - Manual Means - Type C - Bitumen S-65 and Antistripping Agent <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case - III : Type C <br> (II) Bitumen (S-65)

od48192/2019_2020 : Construction of plain cement concrete pavement ,thickness as per design,over a prepared subgrade /&lt;br&gt;sub base,with 43 gradecement or any other type as per clause 1501.2.2 M 20 (grade),coarse and fine&lt;br&gt;aggregates conforming to IS383,maximum size of coarse aggregate not exceeding 25 mm,mixed in a&lt;br&gt;concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix&lt;br&gt;design,laid in approved fixed sideformwork(steel channel, wedges,steel plates including levelling the&lt;br&gt;formwork as per drawing),spreading the concrete with showels,rakes,compacted using needle vibrators&lt;br&gt;and finished in continuous operation including provision of contractionand expansion ,construction joints,&lt;br&gt;curing of concrete slabs for 14 days with water finishing to lines and grade as per drawing and Technical&lt;br&gt;Specifications clause 1501 (Concrete without form work.)

od49196/2019_2020 : S/F name board of size 75*60cm installed in the appropriate place visible to the public made of brick wall with granite plaque should be incerted an engraving letters complete as per the direction of deptl . officers at site .&lt;br&gt;

Bidder Name

VINOD S O