Asian Infrastructure Investment Bank (AIIB) - Andhra Pradesh Urban Water Supply and Septage Management Improvement Project (APUWS and SMIP)

Addanki Municipality

Construction of Intake well of 8.0m dia cum Pump house of 8m dia at Gundlakamma Reservoir near Thammavaram Village (Left Over Works & Wing Walls)

Earthwork in excavation by Mechanical Means for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification etc., complete as per SS and as directed by the departmental officers incharge of the work - up to 3 m depth

RBR-FNDN-1- (IV) - Hard rock (blasting prohibited) -up to 3.00Mts. below GL: Excavation in Hard Rock in habitant areas where conventional blasting can not be done for structures as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 305 MoRD / 304 MoRTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water pipe lines including divertion of traffic and disposal of rock upto a lead of 50 m, including all incidental and operational charges etc., complete

P.C.C. (1:4:8) using 40 mm graded HBG metal from approved quarry including cost, conveyance of all materials to work site, labour charges, mixing with machine, laying in position, ramming, neat finishing, curing etc complete as per SS and as directed by the departmental officer-in-charge of work. But excluding seigniorage charges.

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Bottom Raft Slab of Intake (below bed level 3-4m depth)

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Wing Walls of Intake Well - WALLS

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Floor Slab of Pump Room (20cm th.)

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Roof Beams of intakewell

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Side Wall of Pump room (20cm th.) (0-3 m Above G.L)

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Side Wall of Pump room (20cm th.) (3-4 m Above G.L)

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Side Wall of Pump room (20cm th.) (4-5 m Above G.L)

Laying VRCC in M 30 Grade design mix using 20mm SS-5 graded HBG m/c metal , coarse and fine aggregates conforming to IS: 383, and OPC (cement content 400 kg/cum as per IRC mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges, centering, vibration, curing for 21 days and all incidental & operational charges etc. complete conforming to standard specification 1 Cum Roof Slab over Pump room (25 cm th.) (0-5 m Above G.L)

Providing VRCC in CC M 30 design mix using 20mm graded SS-5 HBG m/c metal and OPC (cement content between 330 to 350 kg/cum as per IRC mix design for Fair degree of quality control), coarse and fine aggregates conforming to IS:383, including cost and conveyance of all materials, machinery, labour, centering, vibration, curing for 21 days and all incidental charges etc. complete but excluding cost of steel and its fabrication, conforming to standard specification - 1 Cum a) for Lintels, Rolling shutter, Windows, Ventilators

Providing VRCC in CC M 30 design mix using 20mm graded SS-5 HBG m/c metal and OPC (cement content between 330 to 350 kg/cum as per IRC mix design for Fair degree of quality control), coarse and fine aggregates conforming to IS:383, including cost and conveyance of all materials, machinery, labour, centering, vibration, curing for 21 days and all incidental charges etc. complete but excluding cost of steel and its fabrication, conforming to standard specification - 1 Cum b) RCC Sun shades 0.60m wide ,0.10m thick at fixed end and 0.05m at free end unit 1.00 Rmt GF upto 3.66m height cement content 400 kgs/cum M30 design mix for for Rolling shutter, Windows,

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.

Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials, labor charges, curing scafolding charges, all taxes, other incidental charges etc complete as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges.

White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply & fixing of Rolling shutter made of 80 x 1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spn: 1108

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work.

Manufacture, Supply of Structural steel / I - Sections including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of Plate Girder beams to support Pumps & Motors, Gantry Girder Beams

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Bailing out water from the trenches with oil engine driven pumpsets, including hire charges and wages for Driver and Helper.

Carting away the surplus excavated earth from the work site with a lead of 1 km beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete

Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application..(PN 2.5 (MPa)) 350mm dia PN 2.5 (MPa)

Lowering, keeping in position and fixing CI / DI sluice valves (with cap / with hand wheel & reflex valves) excluding cost of bolts, nuts, rubber insertion, sluice valve and tail pieces PH-CISP-15

Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code No 1 ) including transportation.

Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete. Double flanged pipe(350) - 2 mtr

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour charges

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT

Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete

Labour charges Fixing of 20W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete.

Supply and erection of 3 Nos of of 29.84 Kw VT Pumpsets each with a duty of 78.50 LPS and a total 25 m( two working and one stand bye). for pumping of Raw water from proposed Raw water Intake well cum pump house in Gundlakamma Reservoir to Aerator at WTP

Providing Raw Water Pumping system at Gundlakamma balancing reservior by supply, delivery and erection of VT pump set with specifications of Head range of 25 mtrs, discharge of 283 M3/Hr for Raw Water (2 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.

Erection of pump: Errection, testing and commissioning of above VT pump set with Lowering of the pump with necessary grider arrangement, lowering of Column pipes and Shafts, flanges fixing with suitable packings and coupling to true to allignment, pump foot base erection on Gridrs, fixing of motor, alignment with sutable dial guage equipment, grouting of foundation bolts, CC plingth finishing with masionery works if required, given electrical connections and testing .

Valves & Accessories for Pipe lines at Pump House:A. Arranging of Non return & Gate/Butterfly valve and SS Expansion bellow for delivery lines of individual pump.B. Arranging of Gate/Butterfly valve & Expansion Bellow on common header at out side of the pump house.C. fixing of suitable dia Vacume and pressure guages with Gliseron filled by providing safety cock on Suction, Individual Pump Delivery and common header.

Control MCC & PCC : Fabrication, supply, fixing, errection, termination, testing and commissioning of indoor type, dust and weather proof MCC & PCC Panel fabricating with 16 SWG CR sheet, making individual compartments for components, making internal wiring with suitable al busbars (Concider 0.9 Amp per Sq.MM area) and copper wires for internal wirings as per IE rules, internal and external surface coating with epoxy powder coating with seven tank process and fixing following components complete

Suitable capacity of MCCB with- 55 kA - 3 Pole, MPR, spreader links and ROM set for Incomer 1 Nos

Suitable Capacity of MCCB 36KA 4P MPR, spreader links and ROM set for SCADA & Spare 2 Nos

Suitable Capacity of MCCB 36KA 3P MPR, spreader links and ROM set with capacitor bank with Capacitor contactor and Time delay relay to maintan greaterthan 0.9 PF while full runnig of the Pumping station 1 Nos

Providing DOL feeder with MPCB, CONTACTOR, add on blocks and other accessories for Vacuum and dewatering pumps 2 Nos

Multifunction metering set with Analog voltmeter and other necessary indication lamps and necessary MCB's for control wiring including Power transformer etc., complete for total control panel 1 Nos

Supply, laying, termination and testing suitable capacity of 1.0 core PVC sheeted, Copper flexible cable (Concider 1.6 Amps per Sq.MM) for in coming power to Drive control centre and to motors, laying with suitable size of cable trays/ PVC conduits according to site condition to fixing wall on groung with necessary angle frame work, laying of cable, tiening, both ends crimping, termination and testing (For laying the erath continouty of 1 run from VFD to Motor should be equal to other conductors to motor termination) - 1 No 1 Nos

Providing earthing to all control panels, Pump motors and all electrical equipment as per the IE rules with necessary earth pits, Copper/GI earth flats etc., complete. - 1 Nos 1 Nos

Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc;

Ring Spanner 3/16 to 1" - 1 Nos

Double end spanner set 3/16" to 1" - 1 Nos

Pipe Wrench 18" & 4" - 2 Nos

Screw drivers 6", 10" & 12" - 3 Nos

Cutting Plier 12" - 1 Nos

2 Kgs Hammer with Handle - 1 Nos

Nose Plier - 1 Nos

Flat and Half round smooth file - 2 Nos

Adjustable Spanner 6" - 1 Nos

Column pipe Clamps - 2 Nos

Line Shaft Clamps - 1 Nos

Line rope and clamps double the weight of pump - 2 Nos

Gland thghtening Spanner - 1 Nos

Spitter removing Spanner - 1 Nos

Supply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; complete - 0 Nos

Fire extiguisher 3Kg capacity - 2 Nos

Rubber Mat 6" x 4" - 2 Nos

Fire Buckets with stand and three buckets - 1 Nos

Rubber Hand Gloves - 1 Nos

Danger Board Plates - 4 Nos

First aid kit with chart - 1 Nos

Shock Treatment Chart - 1 Nos

Portable rechargeble torch light - 1 Nos

Supply and delivery of indigeneous make 500 V.. insulation tested a portable type technometer and megger etc; - 1 Nos

Supply, delivery and erection of suitable capacity (Capacity of the Crane should be two times than the total weight of each pump unit) girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of standard make, including the required MS ISMC, MS angular iron, travelling trolley and chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., - 1 Nos

All Civil Works Such as anchor Blocks, Thrust Blocks, Platform for Pannel Board and Cable trench etc Complete as directed by the Field Engineer - 1 Nos

Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection - 1 Job

Supply, delivery and erection of VFD Control Panels for Pump sets with the following specifications as below and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.

Suitable capacity of three Pole SFU WITH 1NO+1NC ADD ON BLOCKS with semi conductor fuses for Main pump feeder 1 Nos

Suitable capacity of AC3 duty, TP, POWER CONTACTOR WITH 2NO+2NC ADD ON BLOCKS (COIL 230V AC) for Main pump feeder 1 Nos

Power transformer, required push buttons and MFM for each Main pump feeder 1 Nos

Laying of 500mm dia DI Raw Water Pumping Main from Prop. Intake Well to Prop. WTP Aerator at Foot of the Thammavaram Hillock.

Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.

Providing Sand for filling from approved source including cost and conveyance of all materials to work spot and labour charges for spreading, sectioning, watering, and ramming etc., complete as per SS and as directed by the departmental officer incharge of the work. but excluding Seigniorage Charges

Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side (K9) including transportation ,loading,unloading, stacking,CED, etc complete 500 mm dia DI K9

Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 500 mm dia DI K9

Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987 500 mm dia DI K9

Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 250mm dia 2.00m long DI DF pipes for scour

Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 500mm dia 2.00m long DI DF pipes at intake well cum pump house

Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 500mm dia 1.00m long DI DF pipes for sluice and check valves 8+2

Supply, delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 250 mm dia

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 500 mm dia

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 500 mm dia

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 250 mm dia

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 150 mm dia

Supply, delivery, of DI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 250mm Ø DI D/F valve - PN16 for scour

Supply, delivery, of DI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 150mm Ø DI D/F valve - PN16 for Air valves and Air release valves

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc complete ISI marked PN 1.6 (MPa) 500mm Ø DI D/F valve - PN16

Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S 150mm dia. PN16

Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressure 150mm dia. PN16

Manufacture, Supply and delivery of DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per IS:1538. Specification and Dimensions as per I.S 5312 or equivalent codes. 500 mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 500 mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 250 mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 150 mm dia

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 150 mm dia

Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. For Thrust Blocks

Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20 For Anchor Blocks

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work for thurst blocks

Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 500 mm dia

Construction of PCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 250 mm dia

Construction of PCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work For 150 mm dia. Air Valves

Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete 500mm dia mm

Construction of WTP including Recycling of Back wash water unit @ WTP

Design and Construction of 12.00 MLD Rapid Gravity Filtration Plant including all civil, mechanical and electrical works using Gravel & sand as filter media, compatible duly following relevant CHPEEO Manual & IS codes in the design of plant components taking in to consideration 25% overloading including chlorine contact tank and including trial running for 90 days etc.,as per the appended Technical Specification of the tender document and also as per specifications of PHSSR 2025-26. All valves in the Filtration Plant should be compatable for operation with motorised Actuators integrated to SCADA

Providing Recycling arrangements, Centrifuge, Sludge Thickner for WTP

Construction of 100 KL Collecting Sump at Wtp

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - in Ordinary soil - by Mechanical means

Laying of CC (1:3:6) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing for 21 days etc.complete -

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Raft Slab

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Sidewalls of Sump 250mm th

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Ring Beams

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Roof slab 200mm thick

Supply and Delivery of HYSD Fe 415 grade reinforcement steel including cost and conveyance to site and labour charges, cutting, bending, fabrication, binding of reinforcement including cost of binding wire etc. complete as per SS but Excluding all taxes

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.

White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply & Delivery and fixing of H.D.-20 with 560mm dia. Clear opening manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes as per BIS:12592 (Part 1&2) etc., complete and as directed by the Engineer-in-Charge of the work.

Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST

Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) charge of the Tender Document including cost and conveyance 150 mm dia Sluice Valve

Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves. 150mm dia Sluice Valve

Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete. 150mm dia flanged joints

Construction of 200 KL Settling Sump at Wtp

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m

Laying of CC (1:3:6) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing for 21 days etc.complete - 1 cum for Bed

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Floor Slab

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Sidewalls of Sump 250mm th

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Ring Beams

RCC in M 30 Grade design mix using 20mm down graded SS-5 HBG m/c metal , coarse and fine aggregates conforming to IS: 383, as per mix design for Fair degree of quality control) including cost and conveyance of all materials, machinery, all labour charges Roof slab 200mm thick

Supply and Delivery of HYSD Fe 415 grade reinforcement steel including cost and conveyance to site and labour charges, cutting, bending, fabrication, binding of reinforcement including cost of binding wire etc. complete as per SS but Excluding all taxes

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD.

White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply & Delivery and fixing of H.D.-20 with 560mm dia. Clear opening manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes as per BIS:12592 (Part 1&2) etc., complete and as directed by the Engineer-in-Charge of the work.

Manufacture, supply and delivery of Ductile Iron pipes and fittings (spls). Conforming to IS No.7181/1986, 5531/1988, 3950/1979 confirming to IS no.8794/1988 at site of work anywhere in A.P. including loading, unloading, transportation to site of work s

Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) charge of the Tender Document including cost and conveyance 150 mm dia Sluice Valve

Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves. 150mm dia Sluice Valve

Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete. 150mm dia flanged joints

Provision for 4 No 6 Kw Pumpsets Pump back wash water from sump to Aerator

Supply ,delivery,and erection of 4 Nos of Centrifugal pumpsets of 6 KW capacity Centrifugal pump sets having discharge of 9 lps againt head of 16 mts with combined efficiency of 60% to pump Back Wash Water from Sump to 12MLD WTP with 100% stand by of standard make including suction, and delivery connections , Panel boards, cables, earthing arrangements, Non return valves, Butter fly valves , Providing thrust blocks, M.S specials and pipes connection upto puming main, , all taxes and duties, and all labour charges etc., complete including delivery connections upto pumping main.

Provision for Sludge Ponds -2 Nos

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Hard rock (blasting prohibited).

Laying of CC (1:3:6) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing for 21 days etc.complete - 1 cum for Bed

RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement a) Floor Slab

RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement b) Sidewalls of Sump

Supply and Delivery of HYSD Fe 415 grade reinforcement steel including cost and conveyance to site and labour charges, cutting, bending, fabrication, binding of reinforcement including cost of binding wire etc. complete as per SS but including all taxes

Plastering with CM (1:3), 12 mm thick using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

Construction of Clear Water Sump of 300 KL capacity at WTP

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- upto 3m depth

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil-- 3-6.00m depth

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for foundations RBR-FNDN-2(1)

Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Raft slab

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer For side walls circular 0.30m thick initial height 3.00 m below GL

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer For side walls circular 0.30m thick above GL

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Columns

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Roof beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Roof slab 0.15m thick 0.786*(13.10^2-6.00^2)

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer Roof dome slab 0.15m thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Colour washing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)

Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Construction of Clear water Pump Room at WTP

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete Column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete Pedestals

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete Columns

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete Plinth beam 3.50-0.30

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete Lintel beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete Roof Beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete Roof slab 0.125m thick,

Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss Ground floor

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss 1st floor Parapet wall 2(15.90+8.6)=40.66

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside Ground floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor Parapet wall

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for ceiling

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for flooring

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Windows 1.50x1.20m

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

Supply and erection of Clear Water Pumpsets

Supply, delivery and erection of HSC pump set with specifications of Head range of 40 mtrs, discharge of 256 M3/Hr for Clear Water (1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. From Clear Water Sump to OHBR

Supply, delivery and erection of HSC pump set with specifications of Head range of 34 mtrs, discharge of 158 M3/Hr for Clear Water (1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. from Clear Water Intermediate Sump to Different Zones as per approved Designs.

Supply, delivery and erection of HSC pump set with specifications of Head range of 71 mtrs, discharge of 158 M3/Hr for Clear Water (1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.from Clear Water Intermediate Sump to Different Zones as per approved Designs.

Supply, delivery and erection of HSC pump set with specifications of Head range of 35 mtrs, discharge of 270 M3/Hr for Clear Water (1 Working + 1 Strandby) Pumping station with the following specifications and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer. from Clear Water Intermediate Sump to Different Zones as per approved Designs.

Erection of pump: Errection, testing and commissioning of above HSC pump set with construction of suitable size concrete base with VRCC M 30 grade, motor and pump unit erected on channel base, lowering on CC base, alignment with sutable dial guage equipment, grouting of foundation bolts, CC plingth finishing with masionery works, given electrical connections and testing 1 Cum

Valves & Accessories for Pipe lines at Pump House:A. Arranging of Non return & Gate/Butterfly valve and SS Expansion bellow for delivery lines of individual pump.B. Arranging of Gate/Butterfly valve & Expansion Bellow for Suction line where ever the pumping system under possitive suction.C. Arranging of Gate/Butterfly valve & Expansion Bellow on common header at out side of the pump house.D. fixing of suitable dia Vacume and pressure guages with Gliseron filled by providing safety cock on Suction, Individual Pump Delivery and common header 1 Each

Vaccume Pumping: Suitable size of Vaccume pump set with 100% Standby and connected Vaccume pipe lines with suitable GI line and providing heavy duty gate valves for individual pump. Necessary Electrical connections, Suitable coolent tank as required with necessary civil works etc., complete 1 Nos

Control MCC & PCC : Fabrication, supply, fixing, errection, termination, testing and commissioning of indoor type, dust and weather proof MCC & PCC Panel fabricating with 16 SWG CR sheet, making individual compartments for components, making internal wiring with suitable al busbars (Concider 0.9 Amp per Sq.MM area) and copper wires for internal wirings as per IE rules, internal and external surface coating with epoxy powder coating with seven tank process and fixing following components complete 1 Nos

Suitable capacity of MCCB with- 55 kA - 3 Pole, MPR, spreader links and ROM set for Incomer

Suitable Capacity of MCCB 36KA 4P MPR, spreader links and ROM set for SCADA & Spare

Suitable Capacity of MCCB 36KA 3P MPR, spreader links and ROM set with capacitor bank with Capacitor contactor and Time delay relay to maintan greaterthan 0.9 PF while full runnig of the Pumping station

Providing DOL feeder with MPCB, CONTACTOR, add on blocks and other accessories for Vacuum and dewatering pumps

Multifunction metering set with Analog voltmeter and other necessary indication lamps and necessary MCB's for control wiring including Power transformer etc., complete for total control panel

Supply, laying, termination and testing suitable capacity of 1.0 core PVC sheeted, Copper flexible cable (Concider 1.6 Amps per Sq.MM) for in coming power to Drive control centre and to motors, laying with suitable size of cable trays/ PVC conduits according to site condition to fixing wall on groung with necessary angle frame work, laying of cable, tiening, both ends crimping, termination and testing (For laying the erath continouty of 1 run from VFD to Motor should be equal to other conductors to motor termination)

Providing earthing to all control panels, Pump motors and all electrical equipment as per the IE rules with necessary earth pits, Copper/GI earth flats etc., complete.

Supply and delivery of necessary suitable errection tools of reputed make mounted on polished teak wood board including cost of materials and all taxes and duties etc; 1 Nos

Ring Spanner 3/16 to 1" 1 Nos

Double end spanner set 3/16" to 1" 1 Nos

Pipe Wrench 18" & 4" 2 Nos

Screw drivers 6", 10" & 12" 3 Nos

Cutting Plier 12" 1 Nos

2 Kgs Hammer with Handle 1 Nos

Nose Plier 1 Nos

Flat and Half round smooth file 2 Nos

Adjustable Spanner 6" 1 Nos

Column pipe Clamps 2 Nos

Line Shaft Clamps 1 Nos

Line rope and clamps double the weight of pump 2 Nos

Gland thghtening Spanner 1 Nos

Spitter removing Spanner 1 Nos

Supply and delivery of necessary safety equipments as per IE Rules including cost of materials and all taxes and duties etc; complete 0 Nos

Fire extiguisher 3Kg capacity 2 Nos

Rubber Mat 6" x 4" 2 Nos

Fire Buckets with stand and three buckets 1 Nos

Rubber Hand Gloves 1 Nos

Danger Board Plates 4 Nos

First aid kit with chart 1 Nos

Shock Treatment Chart 1 Nos

Portable rechargeble torch light 1 Nos

Supply and delivery of indigeneous make 500V insulation tested a portable type technometer and megger etc; 1 Nos

Supply, delivery and erection of suitable capacity (Capacity of the Crane should be two times than the total weight of each pump unit) girder gantry arrangements to move and lift the installations of the pump house one way with required MS ISMB of standard make, including the required MS ISMC, MS angular iron, travelling trolley and chain pulley block with chains of suitable capacity for lifting and moving arrangements to length of 10.00 m rate is inclusive of the cost of materials, labour charges, site welding etc., 1 Nos

All Civil Works Such as anchor Blocks ,Thrust Blocks, Platform for Pannel Board and Cable trench etc Complete as directed by the Field Engineer 1 Job

Testing and maintanance of the complete equipment covered and trial run for 30 days at 8 hours per day after completion of errection 1 Job

Supply, delivery and erection of VFD Control Panels for Pump sets with the following specifications as below and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.

Supply, delivery and erection of VFD Control Panels for Pump sets with the following specifications as below and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.

Supply, delivery and erection of VFD Control Panels for Pump sets with the following specifications as below and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.

Supply, delivery and erection of VFD Control Panels for Pump sets with the following specifications as below and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.

Suitable capacity of three Pole SFU WITH 1NO+1NC ADD ON BLOCKS with semi conductor fuses for Main pump feeder 1 Nos

Suitable capacity of AC3 duty, TP, POWER CONTACTOR WITH 2NO+2NC ADD ON BLOCKS (COIL 230V AC) for Main pump feeder 1 Nos

Power transformer, required push buttons and MFM for each Main pump feeder 1 Nos

Laying of 450 mm dia with - DI K9- Clear Water Pumping main from proposed WTP to proposed ELBR

Earth work excavation in all soils up to SDR & stone matrix by machinery as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material as per Technical Specification No.305 MORD/304 MORTH up to initial lift of 3.0ms. For Pipe line trenches.

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Manufacture supply delivery,of centrifugally cast (spun) ductile iron pipes for water with SOCKET SPIGOT ENDS CONFIRMING TO IS NO 8329/2000 in standard lengths of 4.00,5.00,5.50,6.00m suitable for push-on-joint (rubber gasket D jointing) with cement mortor lining inside and zinc coating out side (K9) including transportation ,loading,unloading, stacking,CED, etc complete 450 mm dia DI K9

Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S (Plain)ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.

Jointing the C.I,D.I. Pipes, fittings and valves with rubber gasket(push-on-joint) including the cost of the gasket but including all sundries, filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/1994/12888/1987

Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to I.S.: 8329/2000 in standard working Lengths of 1,2,3, 4, 5 mts. for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating. The rates are including transportation, taxes etc. complete. 200mm dia 2.00m long DI DF pipes for scour

450mm dia 2.00m long DI DF pipes at intake well cum pump house

450mm dia 1.00m long DI DF pipes for sluice and check valves 8+2

Supply, delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities.

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 200 mm dia

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. 450 mm dia

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 450 mm dia

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 200 mm dia

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 150 mm dia

Supply, delivery, of DI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 200mm Ø DI D/F valve - PN16 for scour

Supply, delivery, of DI D/F Gate Valve (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. The rate including cost, CST, Excise duty and conveyance to work spot and stacking care fully at site etc.complete as per S.S 150mm Ø DI D/F valve - PN16 for Air valves and Air release valves

Supply, Delivery of D.I double flanged Sluice Valves conforming to IS- 14846 (with up to date amendments, if any) including gear arrangements for the following dia. as per test pressure having Body, Bonnet, Dome, Stool cover,Wedge, Stuffing box, Gland, Thrust plate, Cap/Hand wheel with D.I; Stem,Body seat ring, Wedge facing ring, Bushes, Bolts, Nuts, Pinion and Pinion shaft with Stainless steel (IS 6603) ; Wedge nut, Shoe, Channel with Leaded Tin Bronze ( IS 318 ); Gasket with Neoprene Rubber; Gland packing with Rubber;Gear, Gear housing with Cast Steel excluding all taxes and transportation, etc complete ISI marked PN 1.6 (MPa) 450mm Ø DI D/F valve - PN16

Supply, delivery and fixing in position of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. The rate including all taxes and duties and labour charges for placing and fixing in position etc.complete as per S.S 150mm dia. PN16

Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory including trasportation, Central Excise duty and sale tax etc., complete15 kg/sqcm test pressure 150mm dia. PN16

Manufacture, Supply and delivery of DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces resilient seat, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per IS:1538. Specification and Dimensions as per I.S 5312 or equivalent codes. 450 mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 450 mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 200 mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 150 mm dia

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 150 mm dia

Construction of R.C.C. thrust blocks using using VRCC M20 Gr. nominal mix using 20mm HBG metal from approved quarry including cost and conveyance of all materials at site, seignorage charges, labour charges for machine mixing, laying, vibrating including centering charges but excluding cost of steel for reinforcement and its fabrication including curing etc., complete. For Thrust Blocks

Providing concrete for plain/reinforced concrete in open foundations using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix for Anchor Blocks PCC M20 For Anchor Blocks

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work

Construction of RCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 450 mm dia

Construction of RCC Sluice/scour Valve chambers suitable to the sluice/scour valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work 200 mm dia

Construction of RCC Air Valve chambers suitable to the Air Valve including cost and conveyance of all materials and all labour charges etc.complete as per S.S for finished item of work

Manufacture, Supply and delivery of MS. Dismantling Joints with both side flange end suitable for installation in between flange end pipes. Thickness as per IS: 7322. These rates are excluding Excise duty, Taxes and transportation charges etc., complete 450mm dia mm

Construction of Compound wall for WTP @Thamma varam

RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto

Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 da

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix unit 1.00cum for footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix unit 1.00cum for plinth beam.

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix unit 1.00cum for columns

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix unit 1.00cum for columns (gate pillars)

Suply of HYSD Fe 415 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcement including cost of binding wire etc. complete for reinforcement - 1 kg

Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum

Plastering with CM (1:3), 12 mm thick using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work

Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work

Supply delivery and erection of MS Railing including cost and conveyance of all materials and labour for erection etc., complete for finished item of work

Rising of WTP area with Gravel Filling

Supply and delivery of Gravel/Quarry spall from approved quarries incl.cost, and conveyance to work spot including labour charges for stacking at site to departmentalgauge. The rate including spreading, sectioning of collected Crusher dust including all labour charges for filling, sectioning, watering and rolling with P.R etc., complete as per S.S.

Providing CC Roads in WTP Site

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B))

Compacting Original Ground - Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Granular sub-base/base/surface course with local materials (Table 400.2) Construction of granular sub-base by providing local material spreading in uniform layers with on prepared surface, mixing by mix in place method at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 GRADE -1 PRR RBR-SBBS-2 Page No 318

Granular sub-base/base/surface course with GSB Grading-II (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD. using crusher stone dust unit 1.00 cum

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Mecadem specification including cost, seignorage of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper of site, laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to achieve the desired density etc, as directed by Engineer-in-Charge as per MORT&H specification. 406 (4th version) for finished item of work (Pavement based on levels for finished item of work) RBR -SBBS- II (B)

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type and grade as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side form work,125 micron thick polythene film, spreading the concrete with sholvels, rakes, compacted using needle, plate vibrators and finished in continuous operation with power trovellor including provision of contraction and expansion, construction joints, primer, sealant, and curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Finishing of Cement Concrete pavement surface with Power Trovellor including all charges of T&P, all operational, Incidental and labour charges etc., complete for finished item of work

Supply,Delivery and placing of MS Dowel bars of S240 Grade as per drawings and technical specification of 25 mm dia including wastage, . This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental officer in-charge of the Work.

Supplying,fitting and placing HYSD bar reinforcement (FE 415) grade as per drawings and technical specification for bars below 36mm dia including over laps and wastage, where they are not welded. This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental technical higher authorities.

Providing CC Drain in WTP Site

Bailing out water from the pipe line trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper unit HP hour

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (Page No.484) By Mechanical means 70%

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (Page No.484) By Manual means 30%

Filling Sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH ( Page No. 488) RBR FN-DN-2

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., (Page No.661) BLD-CSTN-2-5

RCC M-20 Design mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert bed blocks and slabs Drain bed

RCC M-20 Design mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert bed blocks and slabs Drain body walls

RCC M-30 Design mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert bed blocks and slabs bed

RCC M-30 Design mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert bed blocks and slabs body walls

RCC M-30 Design mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering for culvert bed blocks and slabs culvert slab

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded (BLD-CSTN-2-18)

Clear Water Elevated Level Balancing Reservoir of 150 KL capacity with 30M staging at the Foot of the Thammavaram Hllock

Earthwork excavation by machinery and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel and soft disintegrated rock, like shelves,stonematrix, removable by pickaxes and crow bars for pipeline trenches and as per specification, drawings and as directed by the departmental officer with an initial lead of 50 M and with all lifts and delifts for pipe line trenches including all incidental and operational charges etc., complete. as follows Ordinery soils-Mechanical Means Upto 3 m depth

Earthwork excavation by machinery and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel and soft disintegrated rock, like shelves,stonematrix, removable by pickaxes and crow bars for pipeline trenches and as per specification, drawings and as directed by the departmental officer with an initial lead of 50 M and with all lifts and delifts for pipe line trenches including all incidental and operational charges etc., complete. as follows Ordinary rock (not requiring blasting) Manual means upto 3.00m depth

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per SS and as directed by the departmental officer incharge of work.

Plain Cement Concrete (1:4:8) using 40mm graded metal (2/3 rd) & 20mm graded nominal size (1/3rd) HBG machine crushed metal (1 Cement : 4 Sand : 8 Coarse aggregate) including cost and conveyance of all materials, seignorage charges, labour charges, mixing charges, consolidation, levelling, centering charges etc., complete. for bed concrete

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Raft

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Below GL shaft side wall

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Ring beam over door

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 0 - 3 Mts for shaft

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 3 - 4 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 4 - 5 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 5 - 6 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 6-7 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 7-8 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 8-9 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 9-10 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 10-11 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 11-12 Mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 12-13mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 13-14mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 14-15mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 15-16mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 16-17mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 17-18mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 18-19mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 19-20mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 20-21mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 21-22mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 22-23mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 23-24mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 24-25mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 25-26mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 26-27mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 27-28mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 28-29mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows 29-30mts

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Bottom dome

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Bottom ring beam

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Conical Side wall

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Top ring Beam

Providing RCC M30 Grade Design Concrete Mix corresponding to IS 456 using / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) other incidental charges etc., complete.as per SS and as directed by the departmental officer incharge of work as follows Top Dome

Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site, seignorage charges and labour charges for mixing of mortar, plastering and curing scaffolding , lifting,other incidental charges etc., complete as per S.S as per ss and as directed by the departmental officer in charge of work for flooring

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 Coats (All Colours) over a base coat of aproved cement primer making 3 coats in total including cost of all , conveyance charges of materials and other incidental charges, scaffolding, lifting and as directed by the departmental officer in charge of work. for Pump House

Supply and delivery and fixing in postion of MS spiral Ladder to the OHSR of Height 30m made with MS tubes,MS angles,MS squares etc including all fabrication and all fixing charges and other incidental charges power charges welding rod etc complete as per ss and as directed by the dept authorities

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying., including and other all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating. Inlet DI pipes 350 mm x 2.00m DIK9 D/F pipes

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating. Inlet DI pipes 350mm x 1.00m DIK9 D/F pipes

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating. Outlet DI pipes 400mm x 2.00m DIK9 D/F pipes

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating. Outlet DI pipes 400mm x 1.00m DIK9 D/F pipes

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating. Overflow DI pipes 400mm x 2.00m DIK9 D/F pipes

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating. Overflow DI pipes 400mm x 1.00m DIK9 D/F pipes

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating Scour DI pipes 200mm x 2.00m DIK9 D/F pipes

Supply and Delivery of Centrifugally cast (Spun) Ductile Iron Pressure pipes with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating Rates are ex-factory, including transportation and other incidental charges, excluding all taxes etc complete as per SS and as directed by the departmatal officer incharge of work for fixing at 90 KL OHBR 30 Mts stating Scour DI pipes 200mm x 1.00m DIK9 D/F pipes

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) PN 1.6(Mpa) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 and transportation and other incidental charges etc,as per ss and as directed by the departmental officer incharge of work as follows

Inlet DI pipes

200mm dia Sluice valve PN 1.6

Outlet DI pipes

200mm dia Sluice valve PN 1.6

Supply and delivery of Centrifugally cast (spun) Ductile Iron Fittings of DI double socket branch flange Tee, DI All Socket Tees, DI Double socket Tapers (Reducer), DI Flanged Socket, DI Flanged Spigot, DI Double Socket Duck Foot Bend, DI Double Flange Duck/Foot bend, DI All socket Cross, DI All Flange Tee, DI All Flange Cross, DI Double Flange Reducer, Blank Flange, Mechanical Joints, DI Double Socket Bends, DI Double Flanged Bends and DI Manhole Frame & cover conforming to IS:9523/2000 having dimensions Up to 500 x 500 mm dia. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing as per class 13/IS 9523/2000) ( ex-works) including Transportation and as per ss and as directed by the departmental officer incharge of work as follows

200mm dia DI D/F Duck foot bend

Supply and delivery of Bolts and Nuts with double washers excluding taxes and including conveyance etc., complete as per SS and as directed by the departmental officer incharge of work.

Supply and delivery of 6 mm thick Rubber Packing excluding taxes and including conveyance etc., complete ss per SS and as directed by the departmental officer incharge of work.

Supply, delivery and fixing of Water Levl Indicator, Name Board,Lighting Arrester other incidental item,Fly Proof Arrester etc as directed by the departmental officer incharge of work for 90 KL OHBR at 30 mtr staging

Laying of 600mm dia DI Clear Water Gravity Main from Prop. Balancing Reservoir at Thammavaram Village to Market Yard centre in Addanki.

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5

RBR-FNDN-1- (IV) - Hard rock (blasting prohibited) -up to 3.00Mts. below GL: Excavation in Hard Rock in habitant areas where conventional blasting can not be done for structures as per drawings and technical specifications including setting out, constru

Providing of compacted sand bed complying with specifications for spreading for pipeline works - 1 Cum

Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K7 suitable for push-onjoint (rubber gasket d jointin

600mm dia DI - K7

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N

Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/

Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and Integral Body seat face of nickel-chromium overlay welding (Fusion Bonded) micro finished, 100 % leak tight in both directions, Medium free bearings and with minimum thickness of 250 microns Fusion bonded food grade epoxy coating and 1200mm dia. and above food grade liquid Epoxy coating of minimum 150 microns applied on both body and disc inside and outside. Face to face dimensions as per EN558-1/IS 13095 body or IS: 13095 long body design standard as per EN 593/IS 5163 Flange drilling as per EN 1092-2/ IS 1538 the Valve should be suitable for buried application. PN 1.6 (MPa)

600mm dia Butterfly valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass. 200mm dia Scour valve

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass. 150 mm dia Isolated valve for air valve

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes and transportation.. PN 1.6 (MPa) 150mm dia Air Valve

Labour Charges for lowering and keeping in position of CI sluice valves reflux valves and scour valves dia of vale in mm a) 600mm dia Sluice Valve

Labour Charges for lowering and keeping in position of CI sluice valves reflux valves and scour valves dia of vale in mm 200mm dia Scour valves

Labour Charges for jointing of DI Kinetic air valves with isolating sluice valves doubhle air valves / air cushion valve excluding cost of jointing materials such as boits nuts and rubber insertions etc complete For 150mm dia air valve

Jointing the C.I/D.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc complete a) 600mm dia Sluice Valve

Jointing the C.I/D.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc complete 200mm dia Scour valves

Jointing the C.I/D.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc complete For 150mm dia air valve

Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code

600mm dia Bends

Supply and placing of the M20 grade Concrete with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., t

For Thrust Blocks

Construction of R.C.C.valve chamber in M20 Grade concrete as per Type design including cost & conveyance of all materials , labour charges, formwork,machine mixing,vibration , curing etc.complete but excluding cost of Manhole cover ,reinforcement & its

600mm dia Sluice valve

200mm dia Scour valve

150mm dia Air valve

Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes

Bailing out water from the trenches with oil engine driven pumpsets, including hire charges and wages for Driver and Helper.

Clear water intermediate sump at Agriculture market yard

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations upto 3.00m depth Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--

upto 3m depth

3-6.00m depth

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for foundations RBR-FNDN-2(1)

Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M30 design mix concrete with concrete mixer

Raft slab

For side walls circular 0.30m thick initial height 3.00 m below GL

For side walls circular 0.30m thick above GL

Columns0.30 x 0.30 ,

Roof beams

Roof slab 0.15m thick 0.786*(13.10^2-6.00^2)

Roof dome slab 0.15m thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Colour washing two coats Using snowcem including cost and conveyance of all labour charges etc.,complete as per (in and out side)

Supply and delivery and fixing in position M S gril of any design including all fabrication and all fixing charges etc compalete as per ss and as directed by the dept authorities

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Clear Water Pump House at Market Yard

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH-sand filling

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix concrete

Column footings

Pedestals

Columns

Plinth beam 3.50-0.30

Lintel beams

Roof Beams

Roof slab 0.125m thick,

Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Ground floor

1st floor Parapet wall 2(15.90+8.6)=40.66

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

Ground floor

1st floor Parapet wall

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for ceiling

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for flooring

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work

Windows 1.50x1.20m

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 20 W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

LAYING OF DI K9 CLEAR WATER Pumping MAINS FROM Market Yard Centre TO ZONAL RESERVOIRS (ZONE-1, ZONE-2,BOMMANAPADU,NAGULAPADU) (150mm dia/ 200mm/ 250mm dia)

Cutting open cement concrete road surface including depositing of excavated materials for water supply line trench work including labour charges and all incidental and operational charges etc., complete..

Cutting open bituminous tar road surface including depositing of excavated materials for sewer line trench work including labour charges and all incidental and operational charges etc., complete.

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - in Ordinary soil

Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum

Providing of compacted crusherdust bed complying with specifications for spreading for pipeline works - 1 Cum

Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9suitable for push-onjoint (rubber gasket d jointing

150mm DI K9

200mm DI K9

250mm DI K9

300mm DI K9

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N

150 mm DI K9

200 mm DI K9

250 mm DI K9

300 mm DI K9

Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/

150 mm DI K9

200 mm DI K9

250 mm DI K9

300 mm DI K9

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.

Sluice Valves

100 mm dia isolating Sluice valves for Air Valves

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.

Scour Valves

150mm dia

Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves. Dia of Valve in mm. including vat. PHE - CISV - 15

100 mm dia isolating Sluice valves for Air Valves

Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewage conforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding center excise duty and VAT complete as per S.S. and as directed by the departmental authorities.

150mm dia 2.00 m long

200 mm DI DF Pipes 1 m Long

250 mm DI DF Pipes 1 m Long

300 mm DI DF Pipes 1 m Long

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.

150mm dia 2.00 m long

200 mm DI DF Pipes 1 m Long

250 mm DI DF Pipes 1 m Long

300 mm DI DF Pipes 1 m Long

for Tees

For scour tees

150mm dia

For Air tees 100 mm dia

Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete.

100 mm dia isolating Sluice valves for Air Valves

100mm dia

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes and transportation.. PN 1.6 (MPa).

100mm dia

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. Dia of Air Valve in mm

100mm dia

Manufacture, supply and delivery of 700mm dia 8mm thick M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP, but excluding all taxes. for encasing to Road crossings and Drain crossings

Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code

All Flanged Tee & tapers upto 500x500mm

Bends above 300mm dia

Bends upto 300mm dia

RCC (M 20) Nominal Mix :using 20mm graded metal using concrete mixer including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement.

For Thrust Blocks

Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes

Construction of R.C.C.valve chamber in M20 Grade concrete as per Type design including cost & conveyance of all materials , labour charges, formwork, machine mixing , vibration , curing etc.complete but excluding cost of Manhole cover , reinforcement &

100mm dia Air valve chamber

PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. (CC pavement)

LAYING OF DI K9 CLEAR WATER Pumping MAINS FROM Market Yard Centre TO ZONAL RESERVOIRS (ZONE5, ZONE6 and Velamuripadu) (150mm dia/ 200mm/ 250mm dia)

Cutting open bituminous tar road surface including depositing of excavated materials for sewer line trench work including labour charges and all incidental and operational charges etc., complete.

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - in Ordinary soil

Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum

Providing of compacted crusherdust bed complying with specifications for spreading for pipeline works - 1 Cum

Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9suitable for push-onjoint (rubber gasket d jointing

150 mm Dia K9

200 mm Dia K9

250 mm Dia K9

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N

150 mm dia

200 mm Dia

250 mm Dia

Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/

150 mm dia

200 mm Dia

250 mm Dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.

Sluice Valves

150 mm Dia

200 mm Dia

100 mm dia isolating Sluice valves for Air Valves

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.

Scour Valves

150mm dia

Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves. Dia of Valve in mm. including vat. PHE - CISV - 15

150 mm Dia Sluice Valve

200 mm Dia Sluice Valve

250 mm Dia Sluice Valve

100 mm dia isolating Sluice valves for Air Valves

Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewage conforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding center excise duty and VAT complete as per S.S. and as directed by the departmental authorities.

150mm dia 2.00 m long

DIDF 1.00m long pipes for sluice and non return valves

200 mm Dia

250 mm Dia

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.

150mm dia 2.00 m long

200 mm dia

250 mm dia

for Tees

For scour tees

150mm dia

For Air tees 100 mm dia

Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete.

150 mm Dia

200 mm Dia

250 mm Dia

100 mm dia isolating Sluice valves for Air Valves

100mm dia

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes and transportation.. PN 1.6 (MPa).

100mm dia

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. Dia of Air Valve in mm

100mm dia

Manufacture, supply and delivery of 700mm dia 8mm thick M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP, but excluding all taxes. for encasing to Road crossings and Drain crossings

Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code

All Flanged Tee & tapers upto 500x500mm

RCC (M 20) Nominal Mix :using 20mm graded metal using concrete mixer including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement.

For Thrust Blocks

Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes

Construction of R.C.C.valve chamber in M20 Grade concrete as per Type design including cost & conveyance of all materials , labour charges, formwork, machine mixing , vibration , curing etc.complete but excluding cost of Manhole cover , reinforcement &

150 mm Dia

200 mm Dia

250 mm Dia

100mm dia Air valve chamber

PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. (CC pavement)

LAYING OF DI K9 CLEAR WATER Pumping MAINS FROM Market Yard Centre TO ZONAL RESERVOIRS (ZONE3, ZONE4) (300mm/ 350mm dia)

Cutting open cement concrete road surface including depositing of excavated materials for water supply line trench work including labour charges and all incidental and operational charges etc., complete..

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH - in Ordinary soil

Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum

Providing of compacted crusherdust bed complying with specifications for spreading for pipeline works - 1 Cum

Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5 5.5 & 6 meter for classification K9suitable for push-onjoint (rubber gasket d jointing

300 mm Dia K9

350 mm Dia K9

Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS N

300 mm Dia K9

350 mm Dia K9

Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket, all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/

300 mm Dia K9

350 mm Dia K9

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.

Sluice Valves

150 mm Dia

200 mm Dia

300 mm Dia

350 mm Dia

100 mm dia isolating Sluice valves for Air Valves

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties and transportation. PN1.6 Mpa - 1 A) Without By-Pass.

Scour Valves

150mm dia

Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves. Dia of Valve in mm. including vat. PHE - CISV - 15

150 mm Dia

200 mm Dia

250 mm Dia

300 mm Dia

350 mm Dia

100 mm dia isolating Sluice valves for Air Valves

Supply and delivery of Centrifugally cast (SPUN) ductile iron pressure pipes with flanged ends for water, gas and sewage conforming to I.S, 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 suitable for push on joint (Rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating, rates are ex-factory, including transportion and excluding center excise duty and VAT complete as per S.S. and as directed by the departmental authorities.

150mm dia 2.00 m long

DIDF 1.00m long pipes for sluice and non return valves

200 mm Dia

250 mm Dia

300 mm Dia

350 mm Dia

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.

150mm dia 2.00 m long

200 mm Dia

250 mm Dia

300 mm Dia

350 mm Dia

for Tees

For scour tees

150mm dia

For Air tees 100 mm dia

Jointing the CI/DI Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500m and testing to required pressure complete.

150 mm Dia

200 mm Dia

250 mm Dia

300 mm Dia

350 mm Dia

100 mm dia isolating Sluice valves for Air Valves

100mm dia

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and inclusive of all taxes and transportation.. PN 1.6 (MPa).

100mm dia

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. Dia of Air Valve in mm

100mm dia

Manufacture, supply and delivery of 700mm dia 8mm thick M.S Spirally Welded Pipes conforming to IS: 3589/2001 including in lining with cement mortar (1:2) 15mm thick using 4 numbers of 6mm dia. M.S. Rings at each end of the pipe and out coating with cement mortar (1:3) 30mm thick by short crating or gunetting duly providing wire mesh of size 50x50x3mm including cost of all materials, labor charges, transportation to anywhere in AP, but excluding all taxes. for encasing to Road crossings and Drain crossings

Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code

All Flanged Tee & tapers upto 500x500mm

RCC (M 20) Nominal Mix :using 20mm graded metal using concrete mixer including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement.

For Thrust Blocks

Supply and delivery of HYSD Fe 500 grade reinforcement steel including cost and conveyance to site and labour charges cutting bending fabrication binding of reinforcement including cost of binding wire etc., complete as per SS but excluding all taxes

Construction of R.C.C.valve chamber in M20 Grade concrete as per Type design including cost & conveyance of all materials , labour charges, formwork, machine mixing , vibration , curing etc.complete but excluding cost of Manhole cover , reinforcement &

150 mm Dia

200 mm Dia

250 mm Dia

300 mm Dia

350 mm Dia

100mm dia Air valve chamber

PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed

Using Concrete mixture up to Plinth Level : Plain Cement concrete nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine Crushed Graded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration.

Construction of 500KL ELSR with 18 M Staging in Zone -1 near NTR nagar

Design and Construction of 500 KL Capacity M30 Grade desing mix VRCC ELSR 18.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.m and as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 in Zone 1 near NTR Nagar

Construction of 500 KL ELSR with 18 m staging at Bommanapadu

Design and Construction of 500 KL Capacity M30 Grade desing mix VRCC ELSR 18.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits, construciton of approved design compound wall not less than 150 Rmt and construction of approved desing watchman quarters not less than 40 Sq.m and as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 at Bommanapadu

Construction of 300 KL ELSR with 15m staging at Velamuripadu

Design and Construction of 300 KL Capacity M30 Grade desing mix VRCC ELSR 15.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits and as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 at Velamuripadu

Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.

Inlet Arrangements

250mm Dia

250x2.00m long DI DF pipes

250x1.00m long DI DF pipes

Outlet Arrangements

250x2.00m long DI DF pipes

250x1.00m long DI DF pipes

Over flow 150mm

200x2.00m long DI DF pipes

200x1.00m long DI DF pipes

Scour 100mm

150x2.00m long DI DF pipes

150x1.00m long DI DF pipes

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. for 250mm DI DF pipes

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. for 200mm DI DF pipes

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94. for 150mm DI DF pipes

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85

250mm dia

200mm dia

150mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass 250mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass Scour 150mm dia

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete.

Incoming 250mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 250mm dia

Scour 150mm dia

Construction of Sluice Valve chambers with RCC M20 nominal mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S and for finished item of work. 250mm dia

Scour 150mm dia

Construction of 300 KL ELSR with 15m staging at Nagulapadu

Design and Construction of 300 KL Capacity M30 Grade desing mix VRCC ELSR 15.00 Mts Staging raft foundation with wind presssure not less than 250 Kg/Sq.m and seisimic zone as per IS code 1893 latest amendment including doglegged staircase, DI inlet/outlet/Scour/overflow arrangements, DI valves and specials, Valve pits and as per the appended Technical Specification of the Tender Document and also as per specifications of PHSSR 2025-26 at Nagulapadu

Centrifugally cast (Spun) Ductile Iron pressure pies with flanged (welded) ends for water, gas, sewage conforming to IS: 8329/2000 in standard working lengths of 1,2,3, 4, 5 mts for classification K9 with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation but excluding taxes & duties etc complete.

Inlet Arrangements

250mm Dia

250x2.00m long DI DF pipes

250x1.00m long DI DF pipes

Outlet Arrangements

250x2.00m long DI DF pipes

250x1.00m long DI DF pipes

Over flow 150mm

200x2.00m long DI DF pipes

200x1.00m long DI DF pipes

Scour 100mm

150x2.00m long DI DF pipes

150x1.00m long DI DF pipes

250 Duck foot bends for incoming and outgoing & over flow

for scour 150 duck foot bend

Supply, delivery of D.I. fittings confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site. The rate excluding VAT and other duties etc.,complete as per S.S. and as directed by the departmental authorities. (Upto 500mm dia)

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.250mm Dia

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.200mm Dia

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.150mm Dia

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85

250mm dia

200mm dia

150mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass 200mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation.PN 1.6 - 1 A) Without By-Pass 150mm dia

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes complete. 250mm dia

Labour charges for lowering and keeping in position of C.I./DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. 250mm dia

Scour 150mm dia

Construction of Sluice Valve chambers with RCC M20 nominal mix suitable to the sluice valves including cost and conveyance of all materials and all labour charges etc.complete as per S.S and for finished item of work. 250mm dia

Scour 150mm dia

Construction of Compound wall for 1400 KL ELSR - Jr College

RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. for footings, by manual means,

Filling of Foundation trenches with Sand Filling including all Material,labour,water Charges etc.,

Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 days etc.complete - 1 cum for Bed

Supply and placing of the Design Mix Concrete RCC M25 Grade corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content(350 Kg per Cum) as per IS code from standard suppliers approved by the department including pumping, centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Footings

Columns

Below GL

Aove GL

Below GL

Aove GL

Plinth Beam

Tie Beam

Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum

Plastering with CM (1:3), 12 mm thick using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work

Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work

Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the ulleys to guide and fixed with locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105 (BMT-F.30)

Painting with two Coats with ready mixed first quality synthetic Enamel paint including cost and conveyance all materials , labour charges etc. complete as per ss

Fixing MS angular sections of 1.20 m length of size 50mm x 50mm x 6mm confirming to IS 226 and IS 808 as directed by the departmental officers including placing in position in the concrete for the purpose of fixing barbed wire fencing and painting the angles with two coats of Synthetic anamel painting including cost and conveyance of all materials, labour charges etc., complete at the top of the compound wall after raising the wall

BLD-CSTN-15-7(307): Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Suply of HYSD Fe 500 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcement including cost of binding wire etc. complete for reinforcement - 1 kg

Construction of Compound wall for 1200 KL ELSR - NSP Office

RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. for footings, by manual means,

Filling of Foundation trenches with Sand Filling including all Material,labour,water Charges etc.,

Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 days etc.complete - 1 cum for Bed

Supply and placing of the Design Mix Concrete RCC M20 Grade corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content(350 Kg per Cum) as per IS code from standard suppliers approved by the department including pumping, centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Footings

Columns

Below GL

Aove GL

Below GL

Aove GL

Plinth Beam

Tie Beam

Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.

Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work

Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work

Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105

Painting with two Coats with ready mixed first quality synthetic Enamel paint including cost and conveyance all materials , labour charges etc. complete as per ss

Fixing MS angular sections of 1.20 m length of size 50mm x 50mm x 6mm confirming to IS 226 and IS 808 as directed by the departmental officers including placing in position in the concrete for the purpose of fixing barbed wire fencing and painting the angles with two coats of Synthetic anamel painting including cost and conveyance of all materials, labour charges etc., complete at the top of the compound wall after raising the wall

BLD-CSTN-15-7(307): Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Suply of HYSD Fe 415 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcement including cost of binding wire etc. complete for reinforcement - 1 kg

Construction of Compound wall for 900 KL ELSR - Market Yard

RBR-FNDN-1 -manual means : Earthwork excavation for structures in all types of soil as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH. for footings, by manual means,

Filling of Foundation trenches with Sand Filling including all Material,labour,water Charges etc.,

Laying of VCC (1:4:8) using 40 mm (SS-5) graded HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, vibration, centering, laying in position, curing for 21 days etc.complete - 1 cum for Bed

Supply and placing of the Design Mix Concrete RCC M20 Grade corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content(350 Kg per Cum) as per IS code from standard suppliers approved by the department including pumping, centering with steel scaffolding Pipes, Jack pipes, Steel Centering Plates, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Footings

Columns

Below GL

Aove GL

Below GL

Aove GL

Plinth Beam

Tie Beam

Brick Masonry work in CM 1:6 using Second class Bricks including cost and conveyance of all materials and labour charges, curing etc. complete as per standard specification - 1 Cum

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.

Painting to external walls with snow cem paint of approved colour in two coats over one coat of suryacem primer including cost of materials and labour charges etc, complete for finished item of the work

Supply delivery and erection of MS gate of approved size including cost and conveyance of all materials and labour for erection etc., complete for finished item of work

Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105

Painting with two Coats with ready mixed first quality synthetic Enamel paint including cost and conveyance all materials , labour charges etc. complete as per ss

Fixing MS angular sections of 1.20 m length of size 50mm x 50mm x 6mm confirming to IS 226 and IS 808 as directed by the departmental officers including placing in position in the concrete for the purpose of fixing barbed wire fencing and painting the angles with two coats of Synthetic anamel painting including cost and conveyance of all materials, labour charges etc., complete at the top of the compound wall after raising the wall

BLD-CSTN-15-7(307): Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Suply of HYSD Fe 415 grade steel including cost and conveyance to site and labour charges including cutting, bending, binding, fabrication of reinforcement including cost of binding wire etc. complete for reinforcement - 1 kg

Construction of Watchman Quarters Single type at 1400 KL ELSR - Jr College

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns 1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beams Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab 0.125m thick with 0.30m extension all sides

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss a) Ground Floor

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss 1st floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors -D - 1.20X2.10 m

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors D1 - 1.00X2.10m

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work Toilet door D2

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for floorring

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20 mm dia nominal bore -from jn for of individual lines to toilets & Kitchen

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 15 mm dia nominal bore -for internal

S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

S& F GI union Ist Quality 19.05mm

S& F GI union Ist Quality 25.40mm

Watchman Quarters

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for cover slabs

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Construction of Watchman Quarters Single type at 1200 KL ELSR - NSP Office

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns 1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beams Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab 0.125m thick with 0.30m extension all sides

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss a) Ground Floor

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss 1st floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors -D - 1.20X2.10 m

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors D1 - 1.00X2.10m

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work Toilet door D2

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for floorring

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20 mm dia nominal bore -from jn for of individual lines to toilets & Kitchen

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 15 mm dia nominal bore -for internal

S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

S& F GI union Ist Quality 19.05mm

S& F GI union Ist Quality 25.40mm

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for cover slabs

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Construction of Watchman Quarters Single type at 900 KL ELSR - Market Yard

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns 1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beams Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab 0.125m thick with 0.30m extension all sides

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss a) Ground Floor

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss 1st floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors -D - 1.20X2.10 m

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors D1 - 1.00X2.10m

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work Toilet door D2

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for floorring

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20 mm dia nominal bore -from jn for of individual lines to toilets & Kitchen

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 15 mm dia nominal bore -for internal

S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

S& F GI union Ist Quality 19.05mm

S& F GI union Ist Quality 25.40mm

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for cover slabs

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Construction of Office cum Stores at WTP

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns 1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beams Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab 0.125m thick with 0.30m extension all sides

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss a) Ground Floor

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss 1st floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors -D - 1.20X2.10 m

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors D1 - 1.00X2.10m

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work Toilet door D2

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for floorring

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20 mm dia nominal bore -from jn for of individual lines to toilets & Kitchen

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 15 mm dia nominal bore -for internal

S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

S& F GI union Ist Quality 19.05mm

S& F GI union Ist Quality 25.40mm

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for cover slabs

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Construction of Watchman Quarters Single type at WTP

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns 1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beams Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab 0.125m thick with 0.30m extension all sides

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss a) Ground Floor

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss 1st floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors -D - 1.20X2.10 m

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors D1 - 1.00X2.10m

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work Toilet door D2

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for floorring

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20 mm dia nominal bore -from jn for of individual lines to toilets & Kitchen

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 15 mm dia nominal bore -for internal

S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

S& F GI union Ist Quality 19.05mm

S& F GI union Ist Quality 25.40mm

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for cover slabs

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Construction of Staff Quarters at Intakewell

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix column footings

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc b) Columns 1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc c) Plinth beam

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc d) Lintle beams Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc e) Roof Beams

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc f) Roof slab 0.125m thick with 0.30m extension all sides

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc h) Loft slab 0.075m thick kitchen

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss a) Ground Floor

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss 1st floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside 1st floor

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors -D - 1.20X2.10 m

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Doors D1 - 1.00X2.10m

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work Toilet door D2

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for floorring

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessoriesof makes Wipro / G.E. / Phillips / Crompton / Bajaj.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20 mm dia nominal bore -from jn for of individual lines to toilets & Kitchen

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 15 mm dia nominal bore -for internal

S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

S& F GI union Ist Quality 19.05mm

S& F GI union Ist Quality 25.40mm

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering for cover slabs

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Providing Transformer of 250 KVA Capacity at Intake well

Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113

Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111

Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110

Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps

Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105

Providing jumper connections with I/O' SWG HDBC wire between the 11 KV equipment on the outdoor structures

Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097

Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:

A) Earth Electrodes

B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146

C) Epoxy insulators

D) No.'8' SWG Copper wire. MAT 04141

Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04044c 250KVA

1. Quantity : 1

2. Rated KVA : 250 KVA

3. Service & Location: Continuous Outdoor Distribution Transformer

4. Mounting : Plinth.

5. Wound : Copper Double wound

6. Type : Core type oil immersed

7. Cooling : ONAN

8. Temp Rise : 40⁰C in oil 45⁰C by resistance

9. Vector Group: Dyn 11

10. Primary Connection : Delta

11. Nominal Voltage / Current : ______

12. Highest system Voltage: 12000V

13. Primary Frequency :50 HZ +/- 3%

14. Number of Phases : 3

15. Primary wires: 3

16. Secondary connection : Star

17. Secondary Volts / Current : 433V

18. Secondary phases : 3

19. Secondary wires: 4

20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps)

21. Terminal arrangement.

a.HV: HT terminal box as per the site condition.

b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable

22. LV:One separate terminal for earthing.

23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats

24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats

25. Percentage Impedance at 75 deg C AT 4.5

26. No load Current Less than 2% of full load Current

27. Standrad Fittings & Accessories.

a. Rating and terminal marking plate: One

b. Lifting Lugs:Two

c. Off-circuit tap switch :One

d. Earthing Terminals :Two

e. Radiators ( Attachable) :Adequate

f. Explosion vent with Diaphragm :One

g. Conservator with Drain plug:one

h. Oil filling hole with cap :One

i. Oil level indicator : One

j. Dehydrating Silicagel Breather : One

k. Terminal Arrangement: HV With Treminal Box

l. Terminal Arrangement : LV Cable Box

m. Separate Neutral Bushing : One

n. Filter valve with blanking plate : One

o. Drain cum filter valve with blanking plate : One

p. Air release device : One

q. Thermometer Pocket : One

r. Four :Unidirectional flat rollers

s. One :10Cm dial thermometer(Rigid stem type)

Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431

LT panel

Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976

Supply and fixing of Electrolytic grade copper bus bar bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978

Incoming

a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980

e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983

g).3RYB Phase indication lamps with leds

h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986

Out-Going

630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for Space Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

.KWH digital meter fro lighting section

Supply of 32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879

Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938

Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998

1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.

Supply and Laying of 3C X50 Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03457b

Transformer yard

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means - Ordinary Soil - up to 3m depth.

Collecton, Supply and filling with Sand complying with standard specifications including cost and conveyance of Sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm size hard, machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs/cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work.

Column footings

Columns 1.20-0.10-0.10-0.30+1.80

Plinth beam 2(15+12)=54-gate3.00=51.00

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 caots over one coat Priming Coat, making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe-500/500D/550D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Manufacture, Supply, delivery of MS grill gates, window ornamental safety grill, made with MS flats, MS angles, MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete

Painting two coats with Synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply and filling with Aggregates 40 mm nominal size complying with standard specifications including cost and conveyance of Aggregates 40 mm nominal size to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.

Errection of 315 KVA transformer at WTP with Transformer yard 15.00x12.00m

Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113

Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111

Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110

Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps

Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105

Providing jumper connections with I/O' SWG HDBC wire between the 11 KV equipment on the outdoor structures

Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097

Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:

A) Earth Electrodes

B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146

C) Epoxy insulators

D) No.'8' SWG Copper wire. MAT 04141

Supply and Transportation of ISI marked copper wound Transformers11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating.Makes : As per list of recommended brands as category I. MAT-04045D 315 KVA

1. Quantity : 1

2. Rated KVA : 315 KVA

3. Service & Location: Continuous Outdoor Distribution Transformer

4. Mounting : Plinth.

5. Wound : Copper Double wound

6. Type : Core type oil immersed

7. Cooling : ONAN

8. Temp Rise : 40⁰C in oil 45⁰C by resistance

9. Vector Group: Dyn 11

10. Primary Connection : Delta

11. Nominal Voltage / Current : ______

12. Highest system Voltage: 12000V

13. Primary Frequency :50 HZ +/- 3%

14. Number of Phases : 3

15. Primary wires: 3

16. Secondary connection : Star

17. Secondary Volts / Current : 433V

18. Secondary phases : 3

19. Secondary wires: 4

20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps)

21. Terminal arrangement.

a.HV: HT terminal box as per the site condition.

b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable

22. LV:One separate terminal for earthing.

23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats

24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats

25. Percentage Impedance at 75 deg C AT 4.5

26. No load Current Less than 2% of full load Current

27. Standrad Fittings & Accessories.

a. Rating and terminal marking plate: One

b. Lifting Lugs:Two

c. Off-circuit tap switch :One

d. Earthing Terminals :Two

e. Radiators ( Attachable) :Adequate

f. Explosion vent with Diaphragm :One

g. Conservator with Drain plug:one

h. Oil filling hole with cap :One

i. Oil level indicator : One

j. Dehydrating Silicagel Breather : One

k. Terminal Arrangement: HV With Treminal Box

l. Terminal Arrangement : LV Cable Box

m. Separate Neutral Bushing : One

n. Filter valve with blanking plate : One

o. Drain cum filter valve with blanking plate : One

p. Air release device : One

q. Thermometer Pocket : One

r. Four :Unidirectional flat rollers

s. One :10Cm dial thermometer(Rigid stem type)

Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431

LT panel

Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976

Supply and fixing of Electrolytic grade copper bus bar bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978

Incoming

a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980

e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983

g).3RYB Phase indication lamps with leds

h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986

Out-Going

630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for Space Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

.KWH digital meter fro lighting section

Supply of 32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879

Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938

Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998

1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.

Supply and Laying of 3C X 70 Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03458

Transformer yard

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etc M25 design mix concrete

column footings

Columns 1.20-0.10-0.10-0.30+1.80

Plinth beam 2(15+12)=54-gate3.00=51.00

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete

Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss

supply and filling the transformer yard with 40mm HBG metal m/c

Providing Transformer of 100 KVA Capacity at Clear Water Intermediarte Sump at Market yard

Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113

Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111

Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110

Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps

Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105

Providing jumper connections with I/O' SWG HDBC wire between the 11 KV equipment on the outdoor structures

Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097

Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:

A) Earth Electrodes

B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146

C) Epoxy insulators

D) No.'8' SWG Copper wire. MAT 04141

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under.Makes : As per list of recommended brands as category I. MAT-04042 a 100KVA

1. Quantity : 1

2. Rated KVA : 100 KVA

3. Service & Location: Continuous Outdoor Distribution Transformer

4. Mounting : Plinth.

5. Wound : Copper Double wound

6. Type : Core type oil immersed

7. Cooling : ONAN

8. Temp Rise : 40⁰C in oil 45⁰C by resistance

9. Vector Group: Dyn 11

10. Primary Connection : Delta

11. Nominal Voltage / Current : ______

12. Highest system Voltage: 12000V

13. Primary Frequency :50 HZ +/- 3%

14. Number of Phases : 3

15. Primary wires: 3

16. Secondary connection : Star

17. Secondary Volts / Current : 433V

18. Secondary phases : 3

19. Secondary wires: 4

20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps)

21. Terminal arrangement.

a.HV: HT terminal box as per the site condition.

b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable

22. LV:One separate terminal for earthing.

23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats

24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats

25. Percentage Impedance at 75 deg C AT 4.5

26. No load Current Less than 2% of full load Current

27. Standrad Fittings & Accessories.

a. Rating and terminal marking plate: One

b. Lifting Lugs:Two

c. Off-circuit tap switch :One

d. Earthing Terminals :Two

e. Radiators ( Attachable) :Adequate

f. Explosion vent with Diaphragm :One

g. Conservator with Drain plug:one

h. Oil filling hole with cap :One

i. Oil level indicator : One

j. Dehydrating Silicagel Breather : One

k. Terminal Arrangement: HV With Treminal Box

l. Terminal Arrangement : LV Cable Box

m. Separate Neutral Bushing : One

n. Filter valve with blanking plate : One

o. Drain cum filter valve with blanking plate : One

p. Air release device : One

q. Thermometer Pocket : One

r. Four :Unidirectional flat rollers

s. One :10Cm dial thermometer(Rigid stem type)

Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431

LT panel

Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976

Supply and fixing of Electrolytic grade copper bus bar bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978

Incoming

a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980

e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983

g).3RYB Phase indication lamps with leds

h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986

Out-Going

630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for Space Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

.KWH digital meter fro lighting section

Supply of 32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879

Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938

Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998

1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.

Supply and Laying of 3C X 35 Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03456

Transformer yard

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means - Ordinary Soil - up to 3m depth.

Collecton, Supply and filling with Sand complying with standard specifications including cost and conveyance of Sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) using coarse aggregate 40mm size hard, machine crushed granite from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work.

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs/cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, centering using steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work.

Column footings

Columns 1.20-0.10-0.10-0.30+1.80

Plinth beam 2(15+12)=54-gate3.00=51.00

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 caots over one coat Priming Coat, making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe-500/500D/550D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Manufacture, Supply, delivery of MS grill gates, window ornamental safety grill, made with MS flats, MS angles, MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete

Painting two coats with Synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply and filling with Aggregates 40 mm nominal size complying with standard specifications including cost and conveyance of Aggregates 40 mm nominal size to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work.

Providing Transformer of 100 KVA Capacity at Intake Well

Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113

Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111

Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110

Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps

Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105

Providing jumper connections with I/O' SWG HDBC wire between the 11 KV equipment on the outdoor structures

Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097

Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below:

A) Earth Electrodes

B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146

C) Epoxy insulators

D) No.'8' SWG Copper wire. MAT 04141

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under.Makes : As per list of recommended brands as category I. MAT-04042 a 100KVA

1. Quantity : 1

2. Rated KVA : 100 KVA

3. Service & Location: Continuous Outdoor Distribution Transformer

4. Mounting : Plinth.

5. Wound : Copper Double wound

6. Type : Core type oil immersed

7. Cooling : ONAN

8. Temp Rise : 40⁰C in oil 45⁰C by resistance

9. Vector Group: Dyn 11

10. Primary Connection : Delta

11. Nominal Voltage / Current : ______

12. Highest system Voltage: 12000V

13. Primary Frequency :50 HZ +/- 3%

14. Number of Phases : 3

15. Primary wires: 3

16. Secondary connection : Star

17. Secondary Volts / Current : 433V

18. Secondary phases : 3

19. Secondary wires: 4

20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps)

21. Terminal arrangement.

a.HV: HT terminal box as per the site condition.

b. LV: Cable box suitable to receive ------------Sq.mm XLPE cable

22. LV:One separate terminal for earthing.

23. Total Losses at 50% Loading [Watts] [Max] : 955 Wats

24. Total Losses at 100% Loading [Watts] [Max] : 2750 Wats

25. Percentage Impedance at 75 deg C AT 4.5

26. No load Current Less than 2% of full load Current

27. Standrad Fittings & Accessories.

a. Rating and terminal marking plate: One

b. Lifting Lugs:Two

c. Off-circuit tap switch :One

d. Earthing Terminals :Two

e. Radiators ( Attachable) :Adequate

f. Explosion vent with Diaphragm :One

g. Conservator with Drain plug:one

h. Oil filling hole with cap :One

i. Oil level indicator : One

j. Dehydrating Silicagel Breather : One

k. Terminal Arrangement: HV With Treminal Box

l. Terminal Arrangement : LV Cable Box

m. Separate Neutral Bushing : One

n. Filter valve with blanking plate : One

o. Drain cum filter valve with blanking plate : One

p. Air release device : One

q. Thermometer Pocket : One

r. Four :Unidirectional flat rollers

s. One :10Cm dial thermometer(Rigid stem type)

Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431

LT panel

Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976

Supply and fixing of Electrolytic grade copper bus bar bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves MAT 03978

Incoming

a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980

e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983

g).3RYB Phase indication lamps with leds

h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986

Out-Going

630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for Space Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

.KWH digital meter fro lighting section

Supply of 32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3Makes: As per list of recommended brands as category I.MAT-02879

Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2Makes: As per list of recommended brands as category I MAT-02938

Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998

1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.

Supply and Laying of 3C X 35 Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03456

Transformer yard at Intake well

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etc M25 design mix concrete

column footings

Columns

Plinth beam

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint 2 caots over one coat Priming Coat, making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars ( Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete

Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss

supply and filling the transformer yard with 40mm HBG metal m/c

NH/R&B/Railway crossings by Trenchless Technology

Railway crossing/road crossings/canal crossings by trenchless technology tunneling work through specialized pipe jacking method in co-ordination with concerned authorities for as per approved drawings, installing to correct level gradient and alignment by hydraulic pipe jacking technique complete including tunneling excavation drive and receive pits , excavation and all machines transportation charges and other required materials but excluding cost of encasing pipe

800mm dia CWM towards Kakanipalem ELSR @ Rama nagar junction.

CWM to 500 KL ELSR Zone-1 near NTR Colony

CWM to 250 KL ELSR @ Nagulapadu

Manufacture, Supply and Delivery of M.S Pipes Conforming to IS 3589/2001 including in lining with Cement motor(1:2)12mm thick using 4 numbers of 6mm dia M.S.Rings at each end of the pipe and Out coating cement motor(1:3)30mm thick by shorcreting or Guniting duly providing wire mesh of size 50x50x3mm including cost of all materials,Labour charges, transportation to anywhere in AP, but including taxes & duties, etc. unit 1.00 Rmt - SOR Rate

800MM DIA

Cost of Laying, Jointing, Hydrostatic filed test pressure, including cost of site welding, jointing materials and cost of transportation of water including emptying pipe line after completion of filed testing unit 1.00 Rmt . SOR Rate

800MM DIA

Providing Service Road to Intakewell to WTP at Thammavram Hillock & Head Water Works to ELBR

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B))

Compacting Original Ground - Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Granular sub-base/base/surface course with local materials (Table 400.2) Construction of granular sub-base by providing local material spreading in uniform layers with on prepared surface, mixing by mix in place method at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 GRADE -1 PRR RBR-SBBS-2 Page No 318

Granular sub-base/base/surface course with GSB Grading-II (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD. using crusher stone dust unit 1.00 cum

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix Mecadem specification including cost, seignorage of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper of site, laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to achieve the desired density etc, as directed by Engineer-in-Charge as per MORT&H specification. 406 (4th version) for finished item of work (Pavement based on levels for finished item of work) RBR -SBBS- II (B)

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type and grade as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side form work,125 micron thick polythene film, spreading the concrete with sholvels, rakes, compacted using needle, plate vibrators and finished in continuous operation with power trovellor including provision of contraction and expansion, construction joints, primer, sealant, and curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Finishing of Cement Concrete pavement surface with Power Trovellor including all charges of T&P, all operational, Incidental and labour charges etc., complete for finished item of work

Supply,Delivery and placing of MS Dowel bars of S240 Grade as per drawings and technical specification of 25 mm dia including wastage, . This rate includes cost and conveyance of steel and binding wire to work site, labour charges for cutting and bending, fabrication of steel etc., complete as per SS and as directed by the Departmental officer in-charge of the Work.

Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for suction, Delivery and common Header with specifications of Water Application: Range: 0-16 Bar / Power Supply: 24 V DC / Output: 4-20 mA / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and conveyance of all material and labor excluding cost of taxes and duties and as per SS and as directed by the department officer

For Raw Water Pumping Station as per the above specification

For Clear Water Pumping Station - 1 as per the above specification

For Clear Water Pumping Station - 2 as per the above specification

For Clear Water Pumping Station -3 as per the above specification

For Clear Water Pumping Station - 4 as per the above specification

Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensors make of SIEMENS/ ABB/ BAUMER/ DANFOSS with specifications of body construction with standard construction, measuring upto 6.00 Mtr depth, protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote communication protocol of 4 to 20 ma, temperature safety is in-built to comprehensive over temperature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

For Raw Water Pumping Station as per the above specification

For Clear Water Pumping Station - 1 as per the above specification

For Clear Water 150KL ELBR

For Clear Water SUMP Inlet

For Clear Water Pumping Station - 2 as per the above specification

For Clear Water Pumping Station - 3 as per the above specification

For Clear Water Pumping Station - 4 as per the above specification

Supply and delivery of 25 MM Dia electrical actuated valves for Vaccume operation for each pump with specification of Thread end, 24 V.. DC and required limit switches and manual override facility complete charges including cost and convayance of all the material, labor etc., complete and excluding cost of Taes and duties

For Clear Water Pumping Station - 1 as per the above specification

For Clear Water Pumping Station - 2 as per the above specification

For Clear Water Pumping Station - 3 as per the above specification

For Clear Water Pumping Station - 4 as per the above specification

Supply and delivery of DI D/F hydraulic and self-medium operated double chamber diaphragm control valve for the functions of pump control i.e. to ensure smooth startup and shutdown of pumps. Valve shall be activated by line pressure and 24V DC solenoid for its operation. Non-return function in built to prevent surges due to pump trip events. Valve closure started as soon as solenoids are deenergized and limit switch of valve position indicator triggered. The valve can be manually overridden to check function. The main valve body internals shall consist of three basic parts i.e. body, diaphragm assembly and top cover with a spring inside main body. The nylon reinforced natural rubber diaphragm of the valve shall close on a seating arrangement. The control tubing shall include inline filter unit. The coating shall be of epoxy BLUE. Charges including cost and conveyance of all material and labor excluding cost of taxes and duties per SS and as directed by the department officer

DN 200 - PN 16 pump control valve for Raw Water Pumping Station as per the above specification

DN 200 - PN 16 pump control valve for Clear Water Pumping Station-1 as per the above specification

DN 200 - PN 16 pump control valve for Clear Water Pumping Station-4 as per the above specification

DN 150 - PN 16 pump control valve for Clear Water Pumping Station -2 as per the above specification

DN 400 - PN 16 pump control valve for Clear Water Pumping Station-3 as per the above specification

Supply and delivery of separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.

200MM Dia Above Specification.

Outlet of Clear Water Pumping main at Pumping station-2

250MM Dia Above Specification.

Outlet of Clear Water Pumping main at Pumping station-4

300MM Dia Above Specification.

Proposed SUMP Inlet

Outlet of Clear Water Pumping main at Pumping station-3

400MM Dia Above Specification.

Outlet of Clear Water Pumping main at Pumping station-1

outlet of Raw Water Pumping Station at Gundlakamma Balancing reservior

Inlet of Raw Water main at WTP

Proposed 150KL ELBR

Supply and testing of panel mounted 96 mmx 48 mm size on line mounted pH Analyser with Display (4 Digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring Range: 0-14 pH, Process pressure range : 1 bar @ 50 Deg C, Measuring method : Reference, Solution ground : Graphite, electrode body: Glass body (tip), Wetted Parts : Glass tip plastic shaft protection Operating Temp: 0 to 50 Deg C, Protection Class : IP 65 (front) & IP 20 (rear), Communication : RS485, Voltage : 24 V.. DC Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.

Raw Water Inlet of Water Treatment plant

Clear Water outlet of Water Treatment plant

Supply and testing of wall mounted 120(w), 140(H), 77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.

Raw Water Inlet of Water Treatment plant

Clear Water outlet of Water Treatment plant

Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Conductivity/ TDS sensor with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: .1 to approx. 1000 μS/cm, Cell constant : 0.1, Process pressure range : 5 bar @ 50 deg c, Measuring method : Conductive 2 electrode, Sampling : 500 msec, Measurands : Conductivity / TDS, Operating temp : -5 to +80 °C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor case: Stainless Steel 1.4571, Body material: PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.

Raw Water Inlet of Water Treatment plant

Clear Water outlet of Water Treatment plant

Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7), Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.

Clear Water outlet-1 of Water Treatment plant

Clear Water outlet-2 of Water Treatment plant

Clear Water outlet-3 of Water Treatment plant

Clear Water outlet-4 of Water Treatment plant

Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Raw Water Inlet of Water Treatment plant

Clear Water outlet of Water Treatment plant

Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panel is suitable for the Control & Monitoring the Level, Flow & Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valves with specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panel is suitable for the above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.

Raw Water inlet and clear water outlet at WTP

Supply, errection, Testing & Commissioning of In door type Scada based RTU control panel for Opearating and monitoring of the Raw Water and Clear Water Pumping stations in auto logic and manual operations including synchornize with SCADA and the specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, arrangement of required PLC/ Controller, Ethernet Switch, Required I/O Modules and DI, DO modules, all components powered by 24 V. DC with necesssary control MCB's, Relay cards, fixing of all termination with FTB's, Internal wiring by all power cables with suitable guage of Single core copper PVC sheated cables and all communication cables with SS Brided cables, and the panel having logic for the following and erection with required civil works as per site conditions etc., complete charges including all materials and labour and excluding of taxes and duties and as per SS and as directed by the department officer.

For Raw Water Pumping Station as per the above specification

For Clear Water Pumping Station as per the above specification

Logic for RTU opeartaions:1. RTU panel for local operaion of the pumps in manual and Auto Mode.2. All the equipment like Pumps, PCC, MCC, VFD Control panels, Pump Control Valves, Vaccume Valve, Pressure and flow sensors connected to RTU through the cabling with necessary power and communication cables.3. The pumps can be opearte in Auto mode by the pumping sequence including monitor and opearte the Vacumization, SumpLevels, Suction, Delivery pressures, Pump Monitoting and PCV operating according to site conditions. 4. In Auto management, the pumps can be operate based on the field demand through control the VFD panels according to pump curves.5. Monitoring the suction and delivery pressures of the pumps and operate under limits assigned.6. Check all the reservoir demands and switch on and switch off the pumps according to demand under limits of pump curves.7. In manual opeartion, all the equiment can be run through PLC panel by individual operations.8.The RTU connected with SCADA for remote monitoring and operation.9. The RTU have a adequated facility to modify any sequence at any time demanded by the department incharge.

Reservoir Inlet Management ::

supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.

100MM Dia Above Specification.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

150 MM Dia Above Specification.

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

200 MM Dia Above Specification.

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

250 MM Dia Above Specification.

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply and delivery of separate version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.

100MM Dia Above Specification.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

150 MM Dia Above Specification.

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

200 MM Dia Above Specification.

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

250 MM Dia Above Specification.

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply and delivery of Electrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit to functions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SS including cost and convayance of all material and labor excluding cost of taxes and duties and as per SS and as directed by the department officer

100MM Dia Above Specification.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

150 MM Dia Above Specification.

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

200 MM Dia Above Specification.

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

250 MM Dia Above Specification.

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

100MM Dia Above Specification.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

150 MM Dia Above Specification.

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

200 MM Dia Above Specification.

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

250 MM Dia Above Specification.

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply, errection, testing and commissioning of Ultra sonic/ Altitude Level sensors make of SIEMENS/ ABB/ BAUMER/ DANFOSS / KELLER with specifications of body construction with standard construction, mesuring upto 6.00 Mtr depth, protection clause of IP 65, accuracy is +/- 5%, input power supply is 24 V.. DC, remote comunication protocol of 4 to 20 ma, temperature safety is in-built to comperhencive over temprature range with in the -40 Deg to +80 Deg, installed in both conditions i.e., indoor and outdoor, charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and duties and as per SS and as directed by the department officer

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply and testing of panel mounted 96 mm x 48 mm size on line mounted Chlorine Analyzer with display (4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 0-10 PPM, Cell constant : 0.1, Process pressure range : 1 bar @ 50 deg c, Measuring method : 2 and 3 Electrode principle, Response time : Approx. 2 min, pH Dependency (loss of slope) : In the range from pH 5 to 7: no loss of slope, at pH 8 about 10%, at pH 9 about 20%, (starting from pH 7), Operating temp : 0 to 50°C, Protection class : IP 67, Communication : RS 485, Voltage : 24 v.. DC, Sensor Case: PVC, Body material : PEI, Cable : 10 Mtrs of Polyimide and the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply and testing of wall mounted 120(w), 140(H), 77(D) Turbidity analyser with display(4 digit) make of FM/ JUMO / ABB/ SIEMENS/ HACH with the technical specifications of Measuring range: 1-4000 Ntu, Process pressure range : 2 bar @ 50 deg c, Measuring method : Infrared light 90 deg scatter light method, Max. sampling rate for measured values: 1 Hz, Resolution : 0.01 to 1 depending on measuring range , Measurands : Turbidity & Temperature Operating temp: 0 to 50 deg c, Protection class : IP 67, Communication : RS 485/4-20 mA, Voltage : 24 v.. DC, Sensor case : PVC/POM-C, Optical window: PMMA, Cable : 10 mtrs of Poly made the charges are including test and calibration certificate, cost and conveyance of all material, labor and excluding cost of taxes.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply laying and fixing of tubing for Inlet and out let of raw water and clear water to the analyzers with necessary pipes with compressed fittings charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panel is suitable for the Control & Monitoring the Level, Flow,Pressure and Quality Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valves with specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panel is suitable for the above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply laying and jointing of 4 Sq.MM - 2 core PVC sheeted cable make of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automation at Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR's and laying with necessary cable trays/Condutes/ Civil works from each and every panel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cable make of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automation at Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and every panel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Erection, testing and commissioning of Reservoir Management unit including dejointing of Proposed pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece, lifting the said pipe, cleaning & returning to the departmental store as per direction of the Engineer-in-charge and lowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,) charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

Integration of PLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of 200 KL Proposed ELSR at Nagulapadu NPI layout

Inlet of 250 KL Proposed ELSR at Bommanapadu NPI layout

Inlet of 250 KL Proposed ELSR at Velamuripadu NPI layout

Inlet of 500 KL Proposed ELSR at Kakanipalem

Inlet of 500 KL Proposed ELSR at NTR Nagar

Inlet of 400 KL Proposed ELSR at Zone-6

Inlet of 1200 KL Proposed ELSR at NSP office

Inlet of 900 KL Proposed ELSR at Zone-5

Inlet of 1400 KL Proposed ELSR at Jr. college

24 x 7 Water Supply :: DMA Management ::

supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and including transportation.

200MM Dia Above Specification.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Supply and delivery of Separate Version Electro Magnetic Flow Meter MAG 5100 model or equilant with the specification of flow body as per company standards, electrodes of SS316, accuracy of +/- 2%, cable length of 20 Mtrs, end connection of ANSI flanges as IS/DIN standards, flow bore protection is IP68, earth rings of SS ( If required as per site condition) flow transmitter body as per company standard and two line display, transmitter having 4-20mA, RS485 and modbus communication for data transfer through any network, power supply of 24 volts DC , and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.

200MM Dia Above Specification.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Supply and delivery of Electrically switched, DI D/F hydraulic and self-medium operated diaphragm Control valve for the functions of Pressure & Flow control at Tank inlet with the function to maintain a constant downstream flow and pressure by controlling the differential pressure between the inlet and outlet of an orifice plate, regardless of pressure variations. The valve shall be of globe pattern inline or angular pattern with a main valve body of full or reduced bore designed for full differential pressure. The seat shall be of stainless steel which is replaceable.The valve can use manually and electrically with 24 V.. AC/DC for operation. The control tubing with self cleaning filter unit to functions as per customer requirement. The internal & external coating with liquid/Powder form epoxy coating, all fastners with SS including cost and convayance of all material and labor excluding cost of taxes and duties and as per SS and as directed by the department officer

200MM Dia Above Specification.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Supply ad delivery of M.S. Dismantling Joints /SS, D/F expansion bellows with specifications of bellow with SS ASTM A 240 TP 304 grade, tie rods with EN8/IS-2062 Grade, End connection flanges with IS 2062 Gr.B Sorf plate, Drilling and dimensions as per approved drawing as required by customer at the time of order confirmation charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

200MM Dia Above Specification.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range: 0-10 Bar / Power Supply: 24 V DC / Output: 4-20 mA / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67 . The cost also includes the calibration of all the sensors manifold etc., complete including cost and convayance of all material and labor excluding cost of taxes and duties and as per SS and as directed by the department officer

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Supply, errection, Testing & Commissioning of Out door type PLC/Controller based Automation and communication Panel fabricating with 16 SWG CR sheet, internal and external surface coating with Epoxy powder coating, making internal wiring with suitable wires including nomenclature. The panel is suitable for the Control & Monitoring the Level, Flow, Pressure and Qaulity Parameters and Comunicating with Central SCADA for Auto logic, Local and Remote operation of the valves with specifications of fabricating with 16 SWG CR sheet, internal and external surface coating with powder coating, making internal wiring with suitable wires including nomenclature. The panel is suitable for the above operations with PLC/Controller, communication modules, HMI, Power back up and necessary modules and as per site conditions etc., complete charges including all material and labor and excluding of taxes and duties and as per SS and as directed by the department officer.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Supply laying and jointing of 4 Sq.MM - 2 core PVC sheeted cable make of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automation at Raw water and clear water pumping with in the Head works compound/ pumping stations/Individual OHSR's and laying with necessary cable trays/Condutes/ Civil works from each and every panel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Supply laying and jointing of 0.75 Sq.MM - 4 core SS Brided and PVC sheeted cable make of LAPP/Orbit/Polycab/Finolex for solar / Raw power for the instrumantation and automation at Raw water and clear water pumping/ with in the Head works compound/ pumping stations/ Individual OHSR,s and laying with necessary cable trays/Condutes/ Civil works from each and every panel through side walls/cealing / floorings etc., where ever is necessary with all related civil works etc., charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Erection, testing and commissioning of DMA management unit including dejointing of Proposed pipeline / flange joints, taking out already laid DI/MS or any kind of pipe barrel piece, lifting the said pipe, cleaning & returning to the departmental store as per direction of the Engineer-in-charge and lowering, aligning & placing the flow Meter unit, jointing the same with fabricating of fittings, reducers, flanges with necessary MS material as per flow meter manufacturer standards and as per the site conditions with necessary lifting equiment, fabrication works, fixing with new Nuts , bolts and Rubber insertion with arrangment of necessary earth work excavations, MS clamp brackets, lifting equipment, retrofit works to complete the job as per site condition (Excluding cost of Meter, Valve& Expansion bellow etc.,) charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Pressure points at Highest Point, Lowest Point & Furthest Point

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

Under 500 KL ELSR at NTR Nagar

Under 500 KL ELSR at Kakani palem

Under 1200 KL ELSR at NSP Office

Under 400 KL ELSR at Market yard (Existing)

Under 900 KL ELSR at Market yard (AIIB)

Integration of PLC panels with Developing necessary softwares and programming as per field condition and user interface, communicated from each panel and intigrated with central SCADA station charges excluding cost of taxes and duties including cost and conveyance of all material including transport and labor etc., complete and as directed by the dept., officer.

Inlet of DMA-1&2 under 1400 KL ELSR at Jr College

AMI Water Meter Management.

Providing, Installing and satisfactory field testing of domestic Water Meter with AMR Compatible Mechanical Water Meters with the specifications of minimum Dynamic ratio (Q3/Q1) of 160:1, fully body made up of composite material/ Brass/ Bronze, the metal Material that come in contact with the water supply shall withstand 2 ppm (Parts per million) of chlorine residual in the water supply and shall be resistant to corrosion, mechanical inferential type, multi jet, magnetically coupled, having dry dial, protection class of IP-68, Class ’B’ confirming to IS-779: 1994 with up to date amendments or ISO 4064:2014 standard with ISI/EEC/OIML/MID/CE certification mark shall be with meter and offer 5 years warranty and submittion of manufacturer test and calbrationreports charges and all charges including cost and conveyance of all material , freight, transport and labour etc and excluding of GST etc., complete, and as directed by the dept., officer.Note: Detailesd technical specifications enclosed as Anexure-A.

DN 15 - PN 16 AMR Compatible Mechanical Water Meter as per above specification for all reservoirs comman area

Under DMA-1,2&3 under 1000 KL ELSR at Govt. College & Junior College with above specifications

Supplying and Fixing water meter BOX- with Weather resistant FRP box, press fitted Lid fixing & locking and locked with built-in or external lock. Charges including breather, NBR bushes for pipe entry, SS Grouting screws etc., complete and as directed by the departmment officer.

Local SCADA Control Sation:

Establishment of HARDWARE for Individual Local Control Station at Individual ULB ::

Supply, erection, testing, commissioning of Hard ware for the SCADA system for Local control station where the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMA and AMI meter management where the instrumantation and automation developed under this project and synchornization by deploying the following components including cost and convayance of all material, user licences, communication networks, etc., complete and as directed by the department officer.

Desktop PC Station with specification of I7 Processor, 8 GB Ram, ,512 GB SSD, Licensed OS, 21" Screen with Mouse, keyboard, and relevant accessories make of LENOVO/ HP/ DELL

55" LED Display make of Sony/Samsung/ LG or equilant with ethernet/HDMI/VGA supported for front end view by connecting with PC in dual mode operation and View the SCADA screens with required cables and connectors etc., complete.

Modem with specifications of Fibre Port having ILL, PON & Network Features, Speed 100/1000, LAN Ports, Fibre port x 1 N0make of CISCO/ HP/ FF/ONV/PHOENIX/Dlink/ Suggested by the telecom provider

3 KVA Stabilizer with specifications of 220 V.AC Input/ 220 V.AC output, necessary terminal wires etc., complete complete

3 KVA online ups with specifications of 220 V.AC Input/ 220 V.AC output, Static By pass with isoltion transformer, Required Battery bank, make of Vertex/EATON/ BPE/ NUMERIC /RIELLO / ENERTECH complete

3 in one on line B/W A4 Lazer Jet printer

Network for all local control stations and central station with registration with any communication provider and payment of minimum one year subscription and establishment of communication

Establishment of Local SCADA station at Addanki Municipality with the above specifications.

Development of Softwares for Individual Local Control Station at Individual ULB ::

Design, Development, Deploy, testing & commissioning of Firmware for the WEB based SCADA system for Local control station where the SCADA room will be developed by the local ULB for operting & View from Service Reservoirs, DMA and AMI meter management and where the instrumantation and automation developed under this project by synchornization with the field instruments, configuration with the following features including cost and convayance of all material, user licences, communication networks, etc., complete and as directed by the department officer.

Development and providing the WEB based SCADA for Operation and Monitoring by the individual ULB where implemented the Reservoir management to AMI management. (Expandable upto Source to end user)

Development of front end view monitoring and operating application in Digital Twin Mode with 3D & 2D model including designing, animation, drawings and integration of SCADA with field devices through MQTT/ MODBUS/ TCPIP protocol etc., complete.

Develop, Supply, install and commissioning of customized WEB applications for Data analytics, Visulation, Trends, Data auditing, generating the reports as required by the customer at the time of commissioning

Develop, Supply, install and commissioning of Anroid & IO's application for data monitoring by through Mobi-APP as required by the customer at the time of commissioning complete

Establishment of Local SCADA station at Addanki Municipality with the above specifications.

Construction of Clear Water SCADA Room 8.00 x 12.00 Size.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Manual Means.

Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work (APDSS No.101).

Laying Cement concrete (1:4:8) using 40mm nominal size HBG metal M/C including cost and conveyance of all materials from approved quarry, machine mixing, vibrating, laying, levelling, ramming, curing and labour charges etc., complete. As per APSS 402 (BLD-CSTN-2-5).

Construction of RR Masonary in C.M (1: 6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.

Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete for Bed.

Plain Cement concrete (M 25) Nominal Mix using 20mm metal using concrete mixer including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc.,complete For Side Walls of Septic Tank.

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Footings

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Pedastals around Columns

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Columns Up to plinth

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Plinth Beams 300 x 400

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Columns

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Up to First Floor Roof Level

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Beams 230 x 500

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Lintels

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Sunshades

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work Staircase slab 0.15 m thick

Supply and placing of the RCC M - 25 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work RCC Slab 150mm thick

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) for pre cast slabs of culverts - RBR-FNDN-8 & Revised Data sl.No-5

Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1). For Ground Floor Level

Brick Masonry in CM (1:6) for 230mm thick with 2nd class Bricks traditional size 23x11x7cms including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering and curing, scaffolding charges, etc complete for finished item of work (BLD-CSTN-3-1). For First Floor Level

11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.

Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work. For First Floor Level

Plastering with CM (1:4), 20 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work. For First Floor

Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work.

Plastering with CM (1:3), 12 mm thick including cost and conveyance of all materials and water to work site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work.

Flooring with 50 mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, including the cost of conveyance of all materials.

Dadooing to walls with first quality glazed coloured tiles approved colour of any size set over base coat of C.M(1:3)prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials labour charges, water to work site,seignourage and all operational .incidental , mixing mortar , fixing in position ,lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work.

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)

Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) pure polyester powder upto 50-60 microns thick, outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the equired rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door

Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification. (SoR 2018-19, BMT-N.51).

Ventilators: Top Hung 2 '-0" x 2'-0" (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm

Providing and fixing Thermocole False ceiling in true horizontal level 600 mm x 600 mm using 15 mm/ 19 mm thick Thermocole sheet anodised Aluminium Tee sections of size 24.50 mm x 24.0 mm x 2.4 mm in grid with cross tee of size 24 x 24.5 mm at every 600 mm c/c and anodised aluminium wall angle of size 24 x 24 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick GI Wire for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complete for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 4 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.BLD-ELEC-4.4.3

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete

Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete.

Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White

Supply of 2.0 TR 5 Star capable of delivering 24000 BTU/ hr and above with operating on refrigerant R-32 / R-410A AC unit with high wall mounted indoor unit and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible cable including cordless remote control etc.ELEC-5.5.1k

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work

SSupplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work

Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.

Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines and inlet

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 20 mm dia nominal bore -from jn for of individual lines to toilets

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 15 mm dia nominal bore -for internal

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

S& F GI union Ist Quality 19.05mm

S& F GI union Ist Quality 25.40mm

Carting away the surplus excavated materials i.e., earth from the site to a suitable distance of about 5 kms including loading, unloading, conveyance charges and dumping the carted materials at the contractors cost, labour charges, all leads and lifts, all other incidental and operational charges etc complete

Hiring for 1 No Vehicles for 36 Months for Departmental use during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,

Providing Technical Diploma Engineer for co-ordinating the process of interconnections of the existing and proposed systems, preparation of documents related to inter departmental permissions and liaison with line departments to obtain permissions including preparation of build drawings as instructed by the Engineer in charge.

Providing Distribution Network to all Zones with HDPE Pipe lines - 110/160/200/250/315/355mm dia

Cutting open cement concrete road surface including depositing of excavated materials for pipe line trench work including labour charges and all incidental and operational charges etc., complete..

Cutting open bituminous tar road surface including depositing of excavated materials for pipe line trench work including labour charges and all incidental and operational charges etc., complete.

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5

RBR-FNDN-1-(i-B-i) : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 5

Providing of compacted Sand bed complying with specifications for spreading for pipeline works - 1 Cum

Providing of compacted Crusher dust bed complying with specifications for spreading for pipeline works - 1 Cum

Manufacture, Supply and Delivery of HDPE Pipes PN 6.0 PE 100 grade conforming to IS: 4984 - 1995 including transportation to any where in A.P, including transporatation, Excise duty and Taxes etc complete

110mm dia

160mm dia

180mm dia

200mm dia

225mm dia

250mm dia

280mm dia

315mm dia

355mm dia

Lowering , Laying, Jointing and testing of HDPE pies with minimum water lead of 500m, including all taxes etc complete

110mm dia

160mm dia

180mm dia

200mm dia

225mm dia

250mm dia

280mm dia

315mm dia

355mm dia

Manufacture, Supply and delivery of DI D/F Butterfly Valves, Body and disc of Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 Double eccentrically designed Disc., with renewable soft seal on the disc and In

150mm dia

200mm dia

250mm dia

300mm dia

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W

100mm dia Sluice valve

150mm dia

200mm dia

250mm dia

100mm dia Scour valve

Labour Charges for lowering and keeping in position of CI sluice valves reflux valves and scour valves dia of valve in mm

100mm dia Sluice valve (including 45 already available in Stock)

150mm dia

200mm dia

250mm dia

300mm dia

100mm dia Scour valve

Jointing the C.I Pipe fittings and valves with flanged ends excluding the cost of jointing materials such as bolts, nuts and white lead but including filling with water with a lead of upto 500m and testing to required pressure etc complete

100mm dia Sluice valve

150mm dia

200mm dia

250mm dia

300mm dia

100mm dia Scour valve

Manufacture, Supply & Delivery of HDPE fittings conforming to IS 4984-1995 including transportation, to anywhere in AP.

110x110x110 - PlainTEE

160x160x160 - Plain TEE

200x200x200 - Plain TEE

250x250x250 - Plain TEE

315x315x315 - Plain TEE

110 mm dia bends

150x100 - Reducer

200x100 - Reducer

Manufacture, Supply, delivery, lowering, jointing, laying 300mm dia RCC NP3 class pipes for encasing to Road crossings and Drain crossings

Construction of R.C.C.valve chamber in M20 Grade concrete as per Type design including cost & conveyance of all materials , labour charges, formwork,machine mixing,vibration , curing etc.complete but excluding cost of Manhole cover ,reinforcement & its

100mm dia Sluice valve

150mm dia Sluice valve

200mm diaScour valve

250mm dia

300mm dia

PCC (1:4:8) using 40 mm graded (SS-5) HBG m/c metal and OPC, coarse and fine aggregates conforming to IS:383 including cost & conveyance of all materials, labour charges, machine mixing, laying in position, curing etc. complete for bed

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. (CC pavement)

Providing House Service Connections

Providing house service connections at house holds side in earthern roads

Providing house service connections at other side in earthern roads

Providing house service connections at other side in BT &CC roads

Providing house service connections at HH side in BT &CC roads

Provision for Environmental Mitigation Measures

Item No#27.Implementation of Environmental Management plan

Establishing Baseline Data: Air Quality Monitoring (4 Monitoring stations) once in a month during the Pre-Construction period and once in a month for three months (4 Monitoring stations) during construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines & Distribution network

Noise level (5 Monitoring stations) once in a season during the Pre-Construction period and once in a season for three seasons (10 Monitoring stations) during the construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines & Distribution network

Water Quality Monitoring surface / ground (5 Monitoring stations) once in a season during Pre-construction period and once in a season (10 Monitoring stations)during the during the construction period at Intake well, Sump & PH, Filtration Plant/WTP, ELSRs, Pipelines & Distribution network

Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5)

Cutting of Trees and removal

Greenbelt development and maintenance in the surroundings / Buffer zone as per approved drawing

Health checkups and free medical distribution

Awareness program/training

Fugitive Dust Emissions from Project Activities, Transportation etc. - Dust Supression Mechanism: Sprinkling of water twice in a day for 1 vehicles x 300 days (excluding rainy days) during Construction phase and Sprinkling of water twice in a day for 1 vehicles x 100 days (excluding rainy days) during Operational phase.

Project Information Boards - Setting up of Sign boards, Posters, barricades etc.

Manning, Operation and Maintenance of Addanki Municiaplity Water Supply Improvements Scheme for 7 years

Personal required for operating Intake/Offtake well/Pump houses Operator

Personal required for operating Intake/Offtake well/Pump houses Fitter/Helper

Personal required for operating Intake/Offtake well/Pump houses Watch man

Personal required at operating Raw water rising mains Fitter/Helper

Personal required at operating Water treatment plants & Sump Operator

Personal required at operating Water treatment plants & Sump Fitter/Helper

Personal required at operating Water treatment plants & Sump Watch man

Personal required at operating Water treatment plants & Sump Lab Tecnician

Personal required at operating distribution system Fitter/Helper

A) Chlorine gas for Disinfection @ 3 mg/Lt Supply, delivery and stacking of Chorine gas as per relevant indian standards in cylinders including cost of material, coveyance, stacking at the location specified by the Department and inclusive of all taxes except GST etc., complete to be used as a disinfectant in accordance with CPHEEO manual guidelines 1st year

B) Alumino -Ferric (Alum) @ 20 mg/Lt Supply and delivery of Alumino -Ferric (Alum) as per IS standards including the cost of material, conveyance, stacking at the location specified by the Dept., and including all taxes except GST etc., complete.rement a1st year

Repairs to pumpsets & Water pipe lines (2 years after execution period) i) Replacement of bearings of pumpsets

iv)Replacement of glands of sluice valves

v) Replacements of balls of Air valves

vi) Greease

vii) Gland Packing

Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 250 mm HDPE Pipes

Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 200 mm HDPE Pipes

Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 160 mm HDPE Pipes

Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete 110 mm HDPE Pipes

LOCAL SCADA at ULB LEVEL

Jr. Service Engineer (Diploma Engineer)Rate as per Labour Rates LAB-00127 of CSSR 2025-26

Data Operator Rate as per Labour Rates LAB-00134 of CSSR 2025-26

Office assistant, Rate as per Labour Rates LAB-00124 of CSSR 2025-26

II) MAINTAINANCE OF LOCAL CONTROL STATION : SCADA

Clear Water outlet of Water Treatment plant

Inlet Arrangments to

500KL ELSR with 18 M Staging in Zone -1 near NTR nagar

500 KL ELSR with 18 m staging at Bommanapadu

300 KL ELSR with 15m staging at Velamuripadu

300 KL ELSR with 15m staging at Nagulapadu

1400 KL ELSR - Jr College

1200 KL ELSR - NSP Office

900 KL ELSR - Market Yard

Replacement of necessary tranducers for PH analysers

Clear Water outlet of Water Treatment plant (Re-imbersable on submission of Proof of Payment)

Replacement of necessary tranducers for Turbidity analysers

Clear Water outlet of Water Treatment plant

BSNL Charges for static IP (Re-imbersable on submission of Proof of Payment)

GPRS Connections

WTP Quality Management

ELSR Management

DMA Management

Charges for maintainance of PC's, Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS, maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete (Re-imbersable on submission of Proof of Payment)

CENTRAL SCADA CENTER AT CIRCLE LEVEL: SCADA

Application Engineer, (Graduate Engineer) To monitor all issues related to both operation & service

System Engineer, (Graduate Engineer) To monitor all meters location through SCADA station and give feedback to the service engineers.

Sr. Service Engineer (Graduate Engineer ) To attend the service calls by the feedback from SCADA Engineer and supervise to overcome major/minor shutdowns

Data Operator With assistance of the DBA, preparation of daily reports, monthly billing, correspondence with consumers and also co-ordinate with the Officials for obtaining of required information when ever asks.

Office assistant, To assist the entire team, dispatches and also maintain SCADA station clean and neat

II) MAINTAINANCE OF LOCAL CONTROL STATION : 16 out of 84 Months

BSNL Charges for static IP Interconnection for Data receive station from all Local Contol RTU panels.

Data base management for WEB reporting Data storage and reporting system for view through WEB and Mobile networks

Charges for maintainance of PC's, Hardware consumables, Minor repair & Servers ,servomax Stabliser, UPS, maintainance of entire system including cost and convayance of all material and labor and attending minor repairs to instrumantation and automation equipment etc., complete for day to day Operations & Reporting (After DLP Only) (Re-imbersable on submission of Proof of Payment)

TIRUVURU NAGAR PANCHAYAT

Construction of 10.00m dia. Raw Water Intake Well at Ferry , Ibrahimpatnam in River Krishna

Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighing the top of steining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete for an internal dia of 8.00mts a) Up to 2.00mdepth from +26.00 m to +24.00m

b) 2.00m to 4.00m depth

c) 4.00m to 6.00m depth

d) 6.00m to 8.00m depth

e) 8.00m to 10.00m depth

f) 10.00m to 11.00m depth

g) 11.00m to 12.00m depth

h) 12.00m to 13.00m depth

i) 13.00m to 14.00m depth

j) 14.00m to 15.00m depth

k) 15.00m to 16.00m depth

l) 16.00m to 16.63m depth

l) 17.00m to 18m depth

l) 18.00m to 19m depth

l) 19.00m to 20m depth

l) 20.00m to 21m depth

l) 21.00m to 22m depth

Providing concrete for plain/reinforced concrete M15 grade in open foundations using 40 mm, 20mm nominal size & 10mm nomial size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH

Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for base slab

b) for Well Curb 0.30m thick

for Side walls (Well Steining)

Side Wall of the Well of 0.50m thick upto bund level to Normal water level + 22.00m to +17.89m=4.11m

Side Wall of the Well of 0.50m thick up to bumd level (22.00-17.89 =4.11) extra lift

platform for placing Sluice Valves

Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) a) for Pump house Columns (8+3)

Centre Beams

c) for Floor Slab 0.25 m thick including 1.00m walk way

d) for Lintel Beams alround

e) for Roof Beams

f) for Roof slab 0.125m thick 0.45m extension

g) for Sunshade of 0.60mts wide and thickness of .075mts at fixed end and 0.05mts.at free end

Brick masonary in CM (1:5) using 2nd class bricks of size 23 x 11 x 7cms. Cost including cost and conveyance of all materials at site, labour charges for curing etc., complete as per S.S for Super structure of Pump house

for Pump house Parapet wall

Supply and fixing of 40mm thick pre-cast Cement Jali of approved design including cost and conveyance to work spot and all labour charges for fixing in position etc.complete as per S.S

Plastering with CM (1:4) 12mm thick including cost and conveyance of all materials at site labour charges for finishing and curing etc., complete as per S.S for the Pump house

b) for Parapet wall

Providing impervious course with C.M (1:3) 20mm thick and mixing with acco proof compound of 1kg per one bag of cement including cost and conveyance of all materials and labour charges for finishing and curing etc., complete as per SS (APDSS NO:903)

Plastering with CM (1:3) 12mm thick including cost and conveyance of all materials at site labour charges for finishing and curing etc., complete as per S.S for ceiling

Painting two coats with snowcem paint of approved colour including cost of primary coat with white cement. The rate includes cost and conveyance of all materials at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities.

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Painting two coats with synthetic enamel paint over a base coat of red led. The rate includeds cost and conveyance of all materilas at site, labour charges, scaffolding charges etc., complete as directed by the departmental authorities (APDSS No:1201)

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work BLD-CSTN-11-30 For Pump house 1.35x1.20m size

Bailing out of water with oil engine, driven pumpset including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of departmental authorities

Supply, delivery, fabrication and erection of Cutting toe for Well curb with ISA 150x150x12mm including cost and conveyance to work spot including all labour charges for fabrication and erection etc.,complete as directed by the departmental authorities.

Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities

Supply and delivery of "Resilient Seated SoftSealing" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15or GGG-50/SG-500/7 or Equivalent as perIS1865, IS:3896-2 and Wedge fully Rubber Linedwith food grade quality grade W270 gradeEPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on theShaft and Seals of NBR. The Valves should beVacuum tight and 100% leak proof with face toface dimensions as BS:5163 Type A/IS:14846. Allthe valves should be with fusion bondedElectrostatic Powder coating both inside andoutside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passageconforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS- 1538 excluding all taxes, duties Drilled as per IS:1538. PN16 including Transportation - 350mm

Supply and delivery of 350mm dia. 2.0m. long centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends of K-9 Class confirming to specification No.IS 8329/2000 of standard working lengths with cement lining inside the pipe, out side Zinc Coating including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.

Labour charges for lowering and keeping in position of C.I. Sluice valves(with cap/with hand wheel), reflux valves and scour valves

Supply and delivery of centrifugally cast (spun) Ductile Iron fittings of K9 Class confirming to IS:9523/2000 having dimensions as per table with cement lining inside, out side Zinc Coating with finishing as per Class 13/IS9523/2000 including cost of Pipe, VAT and other duties. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.

Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.

Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 - 350mm

Supply and delivery of S.S 304 grade operating handle with rod & wheel for operation of D.I. Sluice valve inside the intake well as per the actuals and as directed by the departmental authorities.

Supply and fixing of Stain less steel ladder made out of suitable sections for access from floor slab to Base slab

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour charges

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT

Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete

Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete.

Providing temporory Island for preparation platform for sinking of Intake well-for Intake well 10m dia- island 30m dia and 10m height

Providing and construction of temporary island of 16Mt. diameter for preparation of platform etc. for construction of well foundation for 8Mt. internal dia. Intake well as per Tech. Specification 1203 MORTH. for Intake well 10m dia- island 30m dia and 10m height

Collection and supply and spreading of gravel including compaction ctc complete for approach ramp

Construction of Approch Bridge for Intake well at Krishna River

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for approach ramp (6.00+30.00)/2 ( complete removal is only after completion of bridge

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for approach ramp (6.00+30.00)/2 ( complete removal is only after completion of bridge

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Laying of VCC Mix (1:4:8) using 40mm size HBG machine crushed coarse aggregate and fine aggregate confirming to IS 383 including cost and convayence of all materials, labour charges, machine mixing, laying, vibrating, compacting, finishing curing etc. complete for foundations as per S.S

Providing VRCC M30 Grade Design Concrete Mix corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage charges including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing with cement content 400Kgs/Cum as per I.S code from standard suppliers approved by the department including concreting of piles by tremie concrete method etc. complete with all de-lift charges but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) column footings

Columns

For Intermediate Braces

For Carriage Slab Beams

For Carriage Slab 0.30m thick

Supply, delivery and fabrication of HYSD Steel of various sizes including cutting, bending, tying of grills with binding wire, fabrication charges and placing grills in position including cost and conveyance of all materials including cost of binding wire and all labour charge etc., complete as per S.S and directed by the departmental authorities

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 MORD including cost of necessary reinforcement etc.complete as per S.S

Supply and erection of 3# of 74.60 KW(100HP) VT Pumpsets each with a duty of 64 LPS and a total hed of 86m ( two working and one stand bye) for pumping Raw water from intake well to intermediate sump Mylavaram for intermediate requirement 2033

Supply, delivery and erection of VFD Control Panels for Pump sets with the following specifications as below and the charges including all cost, convayance, tools, tackles, labor etc., complete and excluding cost of GST and as per the SS and as directed by the department officer.

Errection of 315 KVA transformer at WTP with Transformer yard 15.00x12.00m

Supply and erection of 7.50m long double pole structure fabricated with 150x75mm RS Joists,100x50mm MS channels, iron cross armstor fuse set and Lighting arrestrors etc.,including one coat of red oxide primer and two coats of bright Supply

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., ELEC 6.5.14/MAT 04113

Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 no of 24 KV /22 KV post Insulators (IS 5350, Hot dipped Hardware, fuse wire of required size etc., complete ELEC 6.5.12/MAT 04111

Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure ELEC 6.5.11/MAT 04110

Supply and erection of 11KV Strain disc. Insulators with GI pins and top clamps

Supply and fixing of 11 KV pin Insulator (IS 731/1971) with minimum creepage distance of 300 mm on existing cross arm including all accessories like Hot dip GI spindle and nuts etc., ELEC 6.5.8/MAT 04105

Providing jumper connections with I/O' SWG HDBC wire between the 11 KV equipment on the outdoor structures

Supply and erection of GI stay set of dia 16mm,1.8 mtr long stay rod and anchor plate 380mmx380mmx6.4mm. including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete ELEC 6.5.3/MAT 04097

Providing efficient earthing arrangement forthe DP structure lighting arresters and the HV equipment. Transformer body and neutral etc., with 25 x 3 mm copper flats and connecting them to the Earth Electrodes fabricated and buried accroding to standard specifications and as per the details given below: A) Earth Electrodes

B) 20mm x 3mm Copper Flat(0.529Kgs/1Mtr) MAT 04146

C) Epoxy insulators

D) No.'8' SWG Copper wire. MAT 04141

Supply and Transportation of ISI marked copper wound Transformers 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC)+10% to -10%, with RTCC etc., with initial filling of oil as per IS 335-1993 complete and as per the following continuous rating. Makes : As per list of recommended brands as category I. MAT-04045D 315 KVA

Supply and laying of 400Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part- I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab/ KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt ELEC-4.1.1q MAT-03431

Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) MAT 03976

In Coming a) . a) 630A TPN SDFU for main switch Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

b) 630A 4pole change over switch Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

c) Supply and fixing of (0-500) V range Voltmeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required Digital type Make: Conzerve/Elmeasure/Meco/HPL/L&T/socomec MAT 03980

e). Supply and fixing of CT operated direct reading type Ammeter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A Make: Conzerve/Elmeasure/Meco/HPL/L&T/Schneider/AE/Socomec MAT 03983

g).3RYB Phase indication lamps with leds

h).Supply and Fixing of Current Transformer, with all necessary support in existing panel including connection etc. as required from 200 / 5 to 400/5 Ratio, 10 VA, class 1 accuracy: Make: Kappa/L&T/Seimens/C&S/Schneider MAT 03986

OUT GOING-630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU forCW pump house motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for compressor/mechanical equipments Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for low lift sump Raw water motors Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for Space Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A TPN SDFU for lighting section Makes:LauritzKnudsen(FormerlyL&T)/Schneider/ C&S/ ABB / SIEMENS MAT 02885

630A 4pole change over switch for lighting section Makes:Socomec/LauritzKnudsen(FormerlyL&T)/HPL / Havells/ C&SMAT MAT 02898

.KWH digital meter fro lighting section

Supply of 32 Amp………ISI marked TPN Switch Disconnector Fuse Unit, Cubical type without fuses as per IS: 13947/IEC 60947-3 Makes: As per list of recommended brands as category I.MAT-02879

Supply of 6A to 35 A……ISI marked HRC Fuse Links as per IS 13703-Part 2/IEC 60269- Part 2 Makes: As per list of recommended brands as category I MAT-02938

Standard duty Single phase 250 V / Three phase 440 V, 50 Hz capacitor (Bank) MAT-03998

1000KV LT/Transformer Errection.testing Commensing and Supply of drawing layout plans of installed transformer in tracing cloth and duly get approved from electrical inspector APEPDCL and leaflets for various equipments and opearation manuals etc., complete.

Supply and Laying of 3C X 70 Sq mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster/RR Kabel/RPG MAT 03458

Transformer yard Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete, vibrating,curing etc M20 design mix concrete - column footings

Columns 1.20-0.10-0.10-0.30+1.80

Plinth beam 2(15+12)=54-gate3.00=51.00

Colour washing two coats using snowcem over the primery coat conveyance of all labour charges etc., complete as per (in and out side)

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to any type of standard, rails, straining bolts, including securing with and provision of galvanised mild steel wire, stapples or steel pins, etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately).

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding, finishing, applying red oxide paint as primary coat etc complete

Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss

supply and filling the transformer yard with 40mm HBG metal m/c

Construction of electrician / operator/watchman quarters at Intake Well at Ferry , Ibrahimpatnam in River Krishna

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping , centering,shuttering,laying concrete ,vibrating,curing etc M25 design mix column footings

b) Columns 1.50-0.15-0.15-0.20-0.25 =0.75+basement 0.75m+superstructure 3.35m=4.85m

c) Plinth beam

d) Lintle beams Windows

e) Roof Beams

f) Roof slab 0.125m thick with 0.30m extension all sides

g) Sunshades 0.60m wide, 0.10m at fixed end and 0.05m at free end Windows

h) Loft slab 0.075m thick kitchen

Brick work in CM 1:6 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss a) Ground Floor

1st floor

Cement plastering using opc in cm(1:5) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside - Ground floor

1st floor

Cement plastering using opc in cm(1:3) prop 12 mm thick including cost of material, labour ,curing etc. complete as per SS for walls out side & inside above 3.5 m Height

Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) BLD-CSTN-10-3

Supply delivary and fixing RCC Jollys includnig cost and conveyance of all material and all labour charges for fixing etc complete as ss

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work Door -D - 1.20X2.10 m

Doors D1 - 1.00X2.10m

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work windows 1.20x1.20

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work Toilet door D2

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work Toilet door D2

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS for floorring

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providing two coats of Synthic enamil paint over new Iron works including cost and conveyance of all material and all labour charges etc complete as per ss

Supply, delivery and fixing of 110mm dia single socket PVC pipes 4 kg/sqcm prince/Sudhakar or any ISI brand for rain water pipes with clamps

Providing Electrification

Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 2 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of SPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT

Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF≥0.9,Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty.LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton /VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete

Labour charges Fixing of 40W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of worke

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock

Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.

Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.

Supply of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand.

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg

S& F GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete 25 mm dia nominal bore -from tank to jn for of individual lines

20 mm dia nominal bore -from jn for of individual lines to toilets & Kitchen

15 mm dia nominal bore -for internal

S&F of GI & GM fittings - GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

GM Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 12.70mm

For septic Tank

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations

Filling with sand in foundations /pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete

Brick work in CM 1:5 mix using 2nd class bricks brought from approved kilns including cost and conveyance of all materials and all labour charges ,curing for 21 days etc complete as per ss

Cement plastering using opc in cm(1:3) prop 20 mm thick including cost of material, labour ,curing etc. complete as per SS out side & inside

RCC M-25 design mix (cement,fine aggregate,coarse aggregate) corresponding to Table -9 of IS -456 using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work,but including centering,shuttering unit 1.00cum for culvert slabs RBR-SBST-5 A

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.

Construction of Compound wall at intake well Ibrahimpatnam (92.00m compound wall+40.00m Fencing)

Constuction of compound wall with the following specifications 1. Earth work excavation for column footings ,providing sand bed in foundations,providing CC 1:4:8 for foundations,VRCC M 20 for column footings,plinth beams,columns,Brick work in CM 1:6 , Plastering CM 1:5, Snowcem painting, etc complete

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete

Providind Synthic enamil paint two coats over the primery coat excluding cost of primer including cost and conveyance of all matrial and all labour charges etc complete as per ss

Earthwork excavation and depositing on bank with an initial lead of 10 meters and initial lift of 2 meters in case of head lead only in loamy and clayee soils like Black cotton Soils, red earth and ordinary gravel .

Providing river sand filling brought from approved quarry including cost and conveyance of all material and all labour charges such as filling in layers watering ramming etc complete as per ss