Annual Rate Contract for Laying of CI/DI Pipe line, Construction of Valve Chamber, Tube Well and Hand pump in North zone for the year 2025-26.

Name of Work:- Annual Rate Contract for Laying of CI/DI

Pipe line, Construction of Valve Chamber, Tube Well and Hand

pump in North zone for the year 2025-26

Name of Tenderer : ___________________________

Address of Tenderer : ___________________________

Executive Engineer (W.W.)

Vadodara Municipal Corporation

Signature of Tenderer : ____________________

Signature of the Officer issuing

the Tender documents : ____________________

Signature of the Officer

opening the Tender : ____________________

VADODARA MUNICIPAL CORPORATION

Name of Work:- Annual Rate Contract for Laying of CI/DI Pipe line,

Construction of Valve Chamber, Tube Well and Hand pump in North

zone for the year 2025-26

1) For all items (i.e. Part A + B + C+ D +E )

Estimated Cost Tender cost in Rs.

In Figures In Words

Annual Rate Contract

for Laying of CI/DI Pipe

line, Construction of

Valve Chamber, Tube

Well and Hand pump in

for the year 2025-26

Total Rs. Rs.5,00,00,000/- Rs.5,00,00,000/- Rupees Five

Signature of the Tender with seal

VADODARA MUNICIPAL CORPORATION

WATER WORKS DEPARTMENT

PART - A (Labour)

Name of work:- Annual Rate Contract for Laying of CI/DI Pipe line,

Construction of Valve Chamber, Tube Well and Hand pump in North zone

for the year 2025-26.

QTY Item Description RATE

Excavation for pipeline trenche including a ll

safety provisions using side rails and stacking

excavated stuff upto a lead of 90 mt. cleaing

the site etc. complete for lifts and strata as

specified in all sorts of soil and soft murrum.

(GWSSB SOR 22-23, Sec. B, I.no.

1 (1) O.O TO 1.5 Mt. Depth M3

1 (2) 1.5 TO 3.0 Mt. Depth M3

1 (3) 3.0 TO 4.5 Mt. Depth M3

Lowering, laying and jointing C.I.

S & S Spun pipes suitable for Tyton joints/

Mortar lined D.I. K-7 pipes of various classes

with C.I./D.I./M.S. specials of following

diameters in proper position, grade and

alignment as directed by Engineer-in-charge

labour, including transportation, loading,

unloading & giving hydraulic testing

(GWSSB SOR. 22-23, Sec B, I.no.6., P.no. 36)

Refilling the pipeline trenches including

ramming, watering, consolidation, disposal of

surplus stuff as directed within a radious of

3kms. (GWSSB SOR.22-23, Sec.B, I. No.14.1,

Lowering, Laying, Jointing in position

following C.I./DI Double Flanged Sluice valve

including transportation from store to siteof

work, loading, unloading including cost of all

labour jointing material, including nut, bolts

and giving satisfactory hydraulic testing etc.

(GWSSBSOR.22-23, Sec.B, I.no.15.(a),

Lowering, Laying & Jointing DI Specials

suitable for tyton joints of following diameter

in proper position, grade and alignment as

directed by Engineer-in-charge including cost

of EPDM rubber ring, cutting & grinding the

pipe, including transportaion, loading,

unloading from store to site of work, labour,

giving hydraulic testing etc. complete. ( VMC

SOR-06-07, Page No- 4, I.No-10)

Lowering, laying and jointing cast iron pipe

line by lead joint with specials such as tees,

bends, reducers, valves including lighting,

guarding, barricading, testing etc. complete

including cost of jointing materials, such as

lead, hemp yarn etc. complete. but excluding

excavation and refilling.

(VMC SOR-06-07, page no-2 I.no 04)

Labour charges for cutting CI/DI pipes with

the help of requisite tools as directed.

(GWSSB SOR 22-23, Sec.B, I.No. 18(a),

1 1) Pipe thk. Upto 10 mm. Cm.

1 1) Pipe thk. Upto 11 mm to 20 mm. Cm.

Transporting of pipe of all type and size

including loading, unloading and stacking as

directed.(Wt.more then 200kg.), Article having

weight up to1 MT

(GWSSB SOR.13-14, Sec.F, P.No.120,

A) From source of supply to 5 km. MT

B) Beyond 5 km.to 50 km. for each additional

Providing and casting in situ mass cement

concrete in 1:4:8 using black stone crushed

metal of size 25mm to 40mm incl.

Consolidation curing etc. complete. (GWSSB

SOR 22-23, Sec.C, I.no.1, P.no.43) proportion

Brick work using common burnt clay building

bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

(R & B SOR 23-24,I.no.06002BA, P.no.51)

Providing and casting in situ C.C in grade M-

20(Proportions as per mix design or as per

table of IS 456 2000 in masses by weigh

batching) using granite, quartizite , trap metal

of size 6mm to 20 mm for RCC work,

including scaffolding centering, formwork,

needle vibrated consolidation, curing complete

up to 6 meter depth or height. (excluding cost M

of reinforcement and neat finishing) with

centering and shuttering/deshuttering etc

complete for structure other than water

retaining(Below G.L)

(GWSSB SOR.22-23,Sec C, I.No.4(5), P.No.43)

Item No. 12 (A)

Supplying, cutting, bending, binding &

placing in position steel as per plan and

design and as per ISS 2502 including cost of

steel and binding wire for reservoir/structures

only including lift up to 6 meter upto 6mt.

height or depth below G.L for all Kg.

diameters.(Thermo mechanically treated(TMT)

bars Fe-415 grade for all diameters)(GWSSB

SOR.22-23, Sec.C, I.No.9(9.2), P.No.45)

Item No. 12 (B)

Supplying, cutting, bending, binding &

placing in position steel as per plan and

design and as per ISS 2502 including cost of

steel and binding wire for reservoir/structures

only including lift up to 6 meter upto 6mt.

height or depth below G.L for all

diameters.(CRS steel all diameter Fe

grade confirming to relevant I.s)(GWSSB

SOR.22-23, Sec.C, I.No.9(9.5), P.No.45)

Providing 15 mm thick cement plaster by

Mix Mortar for plaster in single coat on rough

side of single or half brick walls for interior

upto floor two level and finished even and

Cement mortar 1:3 (1 Cement : 3 sand)(R & B

Providing & supplying & fixing of steel beam

for supporting precast slab including one

coat of primer and two coat of anticorrosive

paint etc. complete.(GWSSB SOR.22-23, Sec-

C, I.No.22.1(A)(2), P.No.31) +( Sec.B,

Providing and casting in situ mass cement

concrete in 1:3:6 proportion using black stone

crushed metal of size 12mm to 25mm incl.

Consolidation curing etc. complete.with

(GWSSB SOR.22-23,Sec C, I.no.2.2.1, P.no.43

M.S.Specials (GWSSB SOR.22-23,Sec A,

A) M.S. specials plain & socket

1 1) upto 300 mm dia. Kg.

1 2) above 300 mm dia. Kg.

B) M.S. specials flanged ends

1 1) upto 300 mm dia. Kg.

1 2) above 300 mm dia. Kg.

Providing & laying C.I. Rod box of

approximate weight of 13.5 kg. As per drawing

(VMC S.O.R. 06-07, Page No- 10, I.No-10)

Breaking existing asphalt road with necessary

tools and equipments as directed. (Approved

Reinstatement of asphalt road pavement

including providing and supplying all

materials, labour including soling, metalling,

grouting with tack coat, carpet, etc complete.

1 (Approved Rate)

Removing of existing C.I. cap

(VMC S.O.R. 06-07, Page No- 3, I.No-7)

1 80 mm Dia. No.

1 100mm Dia. No.

1 150mm Dia. No.

1 200mm Dia. No.

1 250mm Dia. No.

1 300mm Dia. No.

1 350mm Dia. No.

1 400mm Dia. No.

1 450mm Dia. No.

1 500mm Dia. No.

1 600mm Dia. No.

Removing of existing Pipeline incl. removal of

specials, valves, jointing material including

carting and stacking of removed material from

site of work to the department store as

directed excl. excavation and refilling.(GWSSB

SOR.22-23, Sec.G, I.No.15(A), P.No. 81)

1 80 mm Dia. Rmt.

1 100mm Dia. Rmt.

1 150mm Dia. Rmt.

1 200mm Dia. Rmt.

1 250mm Dia. Rmt.

1 300mm Dia. Rmt.

1 350mm Dia. Rmt.

1 400mm Dia. Rmt.

1 450mm Dia. Rmt.

1 500mm Dia. Rmt.

1 600mm Dia. Rmt.

Item No. 22 (A)

Connection transfer from old CI pipe to new

(Approved Rate)

1 (1) 15mm Dia. No.

1 (2) 20mm Dia. No.

1 (3) 25mm Dia. No.

Item No. 22 (B)

Providing and supplying ISI mark G.I. Pipes

with coupling & fittings of B-class and

diameter including taxes, insurance, loading,

unloading, transportation to departmental

stores, stacking etc.complete (Medium Duty)

including lowering, laying & jointing pipes

with fittings in proper position, grade and

alignment as directed by Enginer-in-chatge

including conveyance from store to site of

work, labour giving hydraulic testing etc.

(GWSSB SOR.22-23,Sec A, I.no.6.1(b),

P.no.10 + Sec-B, I.No 7.1,P.no.36)

1 (1) 15mm Dia. Rmt.

1 (2) 20mm Dia. Rmt.

1 (3) 25mm Dia. Rmt.

Providing and supplying ISI mark

stoneware Pipes of class-A and

following diameter including all taxes,

insurance, loading, unloading, tansportation

to site of work, including lowering, laying and

jointing with cement joint in C.C(1:1) in

proper position, grade and alignment

(GWSSB SOR.22-23, Sec.A, I.No.11.1, P.No.17

+ Sec.B, I.No.12, P.No.40)

1 1) 100mm Dia. Rmt.

Dismentaling tiled of stone floors laid in

including stacking of serviceable materilas

of unserviceable materials with all lead and

lift. (R&B SOR 2023-24 P NO. 99 I.No

Demolition including stacking of serviceable

and disposal of unserviceable materials with

lift. (i) R.C.C. work (R & B SOR 23-24, P. No.

Laying and fixing of 50mm thick interlocking

paver block as per design given by Engineer

Incharge with 50mm thick sand bed layer,

watering, compacting paving with compacter

by mechanical compacter etc. complete as per

specification .( Approved Rate)

Filling in foundation and plinth with brick

layers of 20cm. thickness including watering,

and consolidating etc. complete.(Up to 10 ton)

(R & B SOR 23-24, I.no. 04009A, P.no.36)

Providing and fixing pre-cast Rubber Dye

/steel Dye inter locking concrete block

60mmthick with grade of concrete M300

pnumaticcompressed / vibrated mechanically

and asper approved design Confirming to IS

15658 :2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete (R & B SOR 23-

HS/MS pipe cutting with necessary tools

(GWSSB SOR.22-23, Sec.E, I.No.8.2), P.No.67)

1 1) up to 5 mm thick Rmt.

1 2) 5 to 10 mm thick Rmt.

1 3) above 10 mm thick Rmt.

HS/MS pipe welding incl. finishing of joint.

(GWSSB SOR.22-23, Sec-E, I.No. 7.2, P.No.67

Removing the Sluice valve as directed by

engineer in charge shifting and placing the

same valve in line and level as directed by

engineer in charge (VMC S.O.R. 06-07, Page

Dewatering by pumping set of required

capacity including tamporary platform carting

pumping at site and fixing same in position

including all accessories and fuel labour etc.

complete. (GWSSB SOR 22-23 part 2, Sec.E,

1 Filling in plinth with sand under floors

watering ramming, consolidating and dressing

(R & B SOR 23-24, P No.36 I.C.NO. 04007A

Box cutting the Road surface to proper slope

and camber for making a base for road work

incl. removing the excavated stuff and

depositing on the road side slope us directed

upto 50 Mt.lead. ( R & B SOR 2023-24, Page

No - 125, It code 26008,)

Carting of conveying and utilising the

stuff in bank from end of cutting with all

and lift.(C) Above 400 Meters upto 500

Meters.( R & B SOR 2023-24, Page No -

It code.-26010C)

1 Providing and laying of good quality material

of GSB in proper line,level and camber

(compacted thickness suggested by engineer

incharge) with roller 8-10MT capacity on GSB

as per specification and instruction by

engineer incharge.(Approved Rate)

1 Providing & laying compacted machine

crushed black stone aggregate 250mm thick

wet mix macadam in two layers in the

material with water to OMC in mecanically

mix (pug mill) carriage of mix material by

tipper to site laying,spreading and compacting

in sub base of compacting power vibrater

roller to achive the desired density

(mechanically laid) etc.complete.as per

technical specification MORTH clause-

406(Approved Rate)

Labour Charges for repairing of leakage in

HDPE pipeline with but welding of folling dia

meter at different places including necessary

excavation manually or by mechanise

excavation, dewatering removing of mud,

cleaning of pipe and leakage portion of pipe

from trench with inclussive of mechanical

devices JCB if necessary & labours required

with providing jointing material with welding

mechine etc. comp. (including all material

)(GWSSB SOR 22-23 part 1, Sec.G,(M&R)

Labour Charges for repairing of leakage in

HDPE pipeline of folling dia meter at different

places including necessary excavation

manually or by mechanise excavation,

dewatering removing of mud, cleaning of pipe

and leakage portion of pipe from trench with

inclussive of mechanical devices JCB if

necessary & labours required with providing

material such as MS clamp of required size

with nut, bolt etc. comp. (incl. all material but

Exclu. cost of pipe)(GWSSB SOR 22-23 part

Sec.G,(M&R) I.no.8, P.no.76)

Labour charges for repairing of leakage in

HDPE pipeline of folling dia meter at different

places including necessary excavation

manually or by mechinery,dewatering,

removing of mud, cleaning of pipe and leakage

portion, cutting the pipeline,jointing &

reparing using C.I.D. Joints inclusive of using

all required machinery, labour,DG Set, Fuel

Operetor, CID Joints, rubbe rings, nut bolts,

etc. complete. ( but Excluding cost of

pipe)GWSSB SOR 22-23 part 1, Sec.G,(M&R)

Item No. 4(A) PART - B (Valves & Specials)

Providing & supplying of Following Slucie

Valve Ductile Iron/Spheroidal Graphite (S.G.)

Iron Double flanged resilient seated Sluice

Valves Full bore in accordance with BS

5163/EN 1074-1&2 of PN-10/16 rated, with

Body and Bonnet of Ductile Iron confirming to

GGG-50/40 or IS 1865 Gr. (SG 500/7 or SG

400/15), Wedge of WRAS or DVGWapproved

EPDM rubber (approved for drinking water),

Integral Wedge nut, Shaft of S.S. AISI 420, O

rings of NBR. Body & Bonnet coated with

electrostatically applied epoxy powder coating

to DIN 30677-2 & GSK guidelines or

equivalent to GSK Guideline.Blue colour RAL

5005/5017 with a coating thickness of

microns both inside & outside. Sluice valve

shall be compatible for buried applications

without valve chamber. Face-to-face

dimensions as per BS 5163/EN558 and

Flange drilling as per IS 1538. 100% tight

shut-off. Manual operation by Hand wheel at

present but it should be upgrdabale and

suitable for motorized operation by Electrical

Actuator suitable for SCADA system. (Rate

from quatation of JUPITER Engineering co

1 1) 100mm Dia. P.N. 16 No.

1 2) 150mm Dia. P.N. 16 No.

1 3) 200mm Dia. P.N. 16 No.

1 4) 250mm Dia. P.N. 16 No.

1 5) 300mm Dia. P.N. 16 No.

1 6) 350mm Dia. P.N. 16 No.

1 7) 400mm Dia. P.N. 16 No.

1 8) 450mm Dia. P.N. 16 No.

1 9) 500mm Dia. P.N. 16 No.

10) 600mm Dia. P.N.

Item No.4 (B) (1)

Providing and supplying of DI tail pieces for

sluice valve at store or at site of work

including freight. Loading, unloading,

insurance, inspection charges, octroi and all

taxes etc. complete as per IS-8329-1994 with

ISI mark.(GWSSB SOR 22-23,Sec.A

1 1) Flange Ended 80 to 300 mm Dia. Kg.

1 2) Flange Ended 350 to 600 mm Dia. Kg.

Item No.4 (B) (2)

P & S CI tail pieces. (GWSSB SOR 22-

23,Sec.A ,I.no.19.1.B, P.no.29)

1 1) 80 to 300 mm Dia. Kg.

1 1) 350 to 650 mm Dia. Kg.

Manufacturing, supply & delivery of ductile

iron flange socket spigot bends, tees, reducers

or any other specials as per BS-EN-545/1995

class-A series K-12 suitable for use with D.I.

Pipe manufactured as per IS:8329/1994

delivery of specials is to be to GWSSB store or

site of works any where in Gujarat including

all taxes, loading, unloading, carting,

stacking, insurance, inspection charges,

octroi etc. complete. (GWSSB SOR-22-

23,Sec.A, I.no.8.2.A, P.no.11)

1 1) 80 to 300 mm Dia. Kg.

1 2) 350 to 600 mm Dia. Kg.

Providing and supplying at store or site of

work C.I. special's like tees, bends, reducers,

caps etc. as per IS 1538-1993 with ISI mark,

inclusive of transporting, all taxes, Insurance,

Inspection charges, octroi, loading and

Unloading etc. complete.

(GWSSB SOR 22-23,Sec.A ,I.no.19.1.A,

1 1) Up to 300 mm Dia. Kg.

1 2) 350 to 600 mm Dia. Kg.

HSC ON DI PIPE MAINS USING MDPE PIPES

House Sevice Connection (1/2") 20 mm

Composite DI Strap Saddle for DI pipes , SS

304 Body with SS Strap, Size - 80 - 300 NB x

1 1/2" ( V.M.C. approved rate dt. 02/11/2018) No

Regulating Brass Ferrule, size 15 mm (1/2") (

1 V.M.C. approved rate dt. 02/11/2018) No

Metel Inserted female threaded adaptor with

SS304 material. As per ISO 14236-2000.

Pressure rating will be PN 16, Size - 20 mm x

1 (1/2") ( V.M.C. approved rate dt. 02/11/2018) No

Double Compression Elbow with Compression

on both side , PN 16 size - 20 mm ( V.M.C.

1 approved rate dt. 02/11/2018) No

U PVC ball valve with Compression / Female

threaded, PN 16, Size 20 mm x (1/2") ( V.M.C.

1 approved rate dt. 02/11/2018) No

MDPE Blue Pipe as per ISO 4427, Pressure 16

kg. Size - 20 mm ( V.M.C. approved rate dt.

House Service Connection (3/4") 25 mm

Composite DI Strap Saddle for DI pipes, SS

304 Body with SS Strap, Size - 80 -300 NB x

3/4" ( V.M.C. approved rate dt. 02/11/2018)

Regulating Brass Ferrule , Size - 20 mm

(3/4") ( V.M.C. approved rate dt. 02/11/2018)

Metal inserted female threaded adaptor with

SS 304 material. As per ISO 14236-2000.

Pressure rating will be PN 16, Size - 25mm x

3/4" ( V.M.C. approved rate dt. 02/11/2018)

Double Compression Elbow with Compression

on both side, PN 16, Size - 25 mm ( V.M.C.

approved rate dt. 02/11/2018)

U PVC ball valve with Compression / Female

threded, PN 16, Size - 25 mm x 3/4"

MDPE Blue Pipe as per ISO 4427, Pressure 16

Kg, Size - 25 mm ( V.M.C. approved rate dt.

House Service Connection (1") 32 mm

Composite DI Strap Saddle for DI pipes, SS

304 Body with SS Strap, Size - 80 -300 NB x

1" ( V.M.C. approved rate dt. 02/11/2018)

Regulating Brass Ferrule , Size - 25 mm (1")

Metal inserted female threaded adaptor with

SS 304 material. As per ISO 14236-2000.

Pressure rating will be PN 16, Size - 32mm x

1" ( V.M.C. approved rate dt. 02/11/2018)

Double Compression Elbow with Compression

on both side, PN 16, Size - 32 mm ( V.M.C.

approved rate dt. 02/11/2018)

U PVC ball valve with Compression / Female

threded, PN 16, Size - 32 mm x 1" ( V.M.C.

approved rate dt. 02/11/2018)

MDPE Blue Pipe as per ISO 4427, Pressure 16

Kg, Size - 32 mm ( V.M.C. approved rate dt.

Name of Work : Hand Pump Abstract ( PART – D )

Qty. Item Rate Per Amount

1.0 Drilling of 300mm dia bore hole by Mini DR Rig 464.00 Mtr.

including lowering of pipe assembly Gravel

packing, Clay packing & Development of Bore

hole by washing (For Inst. Of H.P)

Mech. SOR 2022-23 P.No. 1 sec.A I.No.

1.0 Manufacture, supply & delivery of ISI marked 576.00 Mtr.

UPVC Casing pipe (IS 12818/1992 )

Mech. SOR 2022-23 P.No. 1 sec.A I.No.

1.0 Providing of 125mm dia MS Clamp 687.07 No.

Size 450mm x 65 mm x 10mm

Mech. SOR 2022-23 P.No. 17 sec.B I.No. 1 ( d)

1.0 Providing of 125 mm dia UPVC Bail Plug. 397.24 No.

Mech. SOR 2022-23 P.No.18 sec.B I.No. 4B (1 )

1.0 Providing and fitting of 125 mm dia UPVC Bore 272.40 No.

Mech. SOR 2022-23 P.No. 17 sec.B I.No. 2C (1)

1.0 Providing of Gravel 4mm to 6mm size with 2029.00 Cmt.

carting from Sevalia to actual site of work.

Mech. SOR 2022-23 P.No. 15 sec.A An-A

1.0 Development of bore by Air-Compressor 400 2719.00 Hrs.

cfm/100 PSI Air Comp. till sand free discharge.

Mech. SOR 2022-23 P.No. 6 sec.A I.No. 6(6.1)

1.0 Installation of India mark II H. P. assembly as 3748.59 Job

per Unicef specifications complete with carting,

lowering of 32 mm dia. riser pipes as required,

construction of C. C. plateform 1:2:4 etc.

including providing cement, sand & kapachi etc

& construction of soak pit as modified Unicef

design including excavation of (100 cm x 70 cm

x 70 cm deep) with filling of stones, broken

bricks or gravel and laying 29 numbers bricks

vertically on edge of soak pit etc. complete.

Mech. SOR 2022-23 P.No. 27 sec.C I.No. 4(a)

1.0 Manufacture of ISI marked Deepwell Hand pump 6988.00 Set

set (IS 15500/2004 or any latest ammendment /

revision there of) and supply & delivery without

riser pipes along with 12 numbers of connecting

rods confirming to IS 1573 with latest

amendment / revision.

Normal Stand Assembly

Mech. SOR 2022-23 P.No. 19 sec.B I.No. 8(a)

1.0 Supply of ISI marked 32 mm Dia. medium duty 251.00 Mtr.

GI pipes as per IS: 1239 part I with latest

Mech. SOR 2022-23 P.No. 25 sec.B I.No.21

1.0 Geological Survey Charges 3571.00 No.

Mech. SOR 2022-23 P.No.7 sec.A I.No. 9.1 (a)

NAME OF THE WORK :- નવિન બોરિેલ બનાિિા માટે ના SOR ( PART – E )

Item Description Rate Unit

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

1 SOR Year:- 2023-24 201.81 Cum

Item Code:-04B001A

Drilling of tube well by direct/reverse rotary rig in alluvial

starta (Alluvium Area completed up to 300 mrt) Drilling of

pilot bore hole in alluvial strata by direct rotary ring/ reverse

rotary ring size 300 mm

S.O.R. = GWSSB Ele & Mech

2 SOR Year:- 2022-23 963 Rmt

Chapter No:- SECTION A

Reaming of 250/300 mm dia. pilot bore hole including

assembling, lowering housing casing , strainer pipes, gravel

packing, clay packing etc. 400 mm

S.O.R. = GWSSB Ele & Mech

3 SOR Year:- 2022-23 295 Rmt

Chapter No:- SECTION A

Cement grouting/ sealing without cost of cement by means of

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION A

Air Compressor test of tube well by air compressor of

CFM / 100 PSI capacity in all districts.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION A

Air Compressor test of tube well by air compressor of

CFM / 150 PSI capacity in all districts.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION A

Geophysical & geohydrological ground water investigation

for finalisation of one pin point including vehicle charges.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

7 14286 Per Nos

Chapter No:- SECTION A

Electrologging charges (With carting)

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION A

Supply of best quality well sorted Sevaliya gravel of size

ranging from 4 mm to 6mm.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION A

Clamps made from MS plate with 3 holes on either side with

nuts & bolts of standard make and suitable size

(d) 450mm x 65mm x 10mm flat suitable to 100/125mm

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Clamps made from MS plate with 3 holes on either side with

nuts & bolts of standard make and suitable size

(e) 750mm x 75mm x 10mm flat suitable to 150mm dia.pipe.

S.O.R. = GWSSB Ele & Mech

11 SOR Year:- 2022-23 1106.07 Pair

Chapter No:- SECTION B

Clamps made from MS plate with 3 holes on either side with

nuts & bolts of standard make and suitable size

(f) 750mm x 75mm x 10mm flat suitable to 175 mm dia.pipe.

S.O.R. = GWSSB Ele & Mech

12 SOR Year:- 2022-23 1118.15 Pair

Chapter No:- SECTION B

Clamps made from MS plate with 3 holes on either side with

nuts & bolts of standard make and suitable size

(g) 750mm x 75mm x 16 mm flat to 200 mm dia.pipe.

S.O.R. = GWSSB Ele & Mech

13 SOR Year:- 2022-23 1627.71 Pair

Chapter No:- SECTION B

Bore plug of 100 mm height made from MS plate with

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts bolts & lock nuts of standard

make From 3 mm thick MS plate (For top also) (i)Suitable for

100 mm dia. pipe.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-2(A)

Bore plug of 100 mm height made from MS plate with

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts bolts & lock nuts of standard

make From 3 mm thick MS plate (For top also)

(ii)Suitable for 125 mm dia. pipe.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-2(A)

Bore plug of 100 mm height made from MS plate with

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts bolts & lock nuts of standard

make From 3 mm thick MS plate (For top also) (iii)Suitable

for 150 mm dia. pipe.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-2(A)

Bore plug of 100 mm height made from MS plate with

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts bolts & lock nuts of standard

make From 5 thick MS plate (For Top also)

17 (i)Suitable for 175 mm dia. Pipe 654.96 Nos

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-2(B)

Bore plug of 100 mm height made from MS plate with

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts bolts & lock nuts of standard

make From 5 thick MS plate (For Top also)

(ii)Suitable for 200 mm dia. Pipe

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-2(B)

Bore plug of 100 mm height made from MS plate with

holes at equal distance on circumference for nut-bolts type,

locking arrangement with nuts bolts & lock nuts of standard

make From 5 thick MS plate (For Top also)

(iii)Suitable for 250 mm dia. Pipe

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-2(B)

UPVC Bail plug (Bottom Cap) Suitable for ( i) 125 mm dia.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-4(B)

UPVC Bail plug (Bottom Cap) Suitable for ii) 200 mm dia.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-4(B)

Manufacture, supply & delivery of ISI marked UPVC Casing

pipe (IS 12818 with latest amendment. (Rates are exclusive of

GST) (a) 125.00 mm nominal dia. " CM " Type

S.O.R. = GWSSB Ele & Mech

22 SOR Year:- 2022-23 576 Rmt

Chapter No:- SECTION B

Manufacture, supply & delivery of ISI marked UPVC Casing

pipe (IS 12818 with latest amendment. (Rates are exclusive of

GST) (c) 175.00 mm nominal dia. " CM " Type

S.O.R. = GWSSB Ele & Mech

23 SOR Year:- 2022-23 906 Rmt

Chapter No:- SECTION B

Manufacture, supply & delivery of ISI marked UPVC Casing

pipe (IS 12818 with latest amendment. (Rates are exclusive of

(c)200.00 mm nominal dia. " CM " Type

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Manufacture, supply and delivery of following ISI marked

HDPE pipes (IS:4984/1985 with latest amendment) having

material Grade PE-80 in approximate100meter coil lengthor

per GWSSB requirement with SS 316 nipple at both ends

having 11 TPI threads as per specifications, press fitted and

bolted having nominal diameter as under as per detailed

technical specifications. (Rates are exclusive of GST)

25 (i) DN 32 PN-10 36 Rmt

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Manufacture, supply and delivery of following ISI marked

HDPE pipes (IS:4984/1985 with latest amendment) having

material Grade PE-80 in approximate100meter coil lengthor

per GWSSB requirement with SS 316 nipple at both ends

having 11 TPI threads as per specifications, press fitted and

bolted having nominal diameter as under as per detailed

technical specifications. (Rates are exclusive of GST)

26 (ii) DN 40 PN-10 55 Rmt

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Manufacture, supply and delivery of following ISI marked

HDPE pipes (IS:4984/1985 with latest amendment) having

material Grade PE-80 in approximate100meter coil lengthor

per GWSSB requirement with SS 316 nipple at both ends

having 11 TPI threads as per specifications, press fitted and

bolted having nominal diameter as under as per detailed

technical specifications. (Rates are exclusive of GST)

27 (iii) DN 50 PN-10 84 Rmt

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

GI Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee,

Coupling, Reducer (A) Up to 65 mm

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

GI Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee,

Coupling, Reducer (B) Above 65 mm and up to

29 S.O.R. = GWSSB Ele & Mech 72.75 Kg

SOR Year:- 2022-23

Chapter No:- SECTION B

GI Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee,

Coupling, Reducer (C) Above 100 mm

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION B

Control Panel Board (Rates exclusive of GST) DOL / Star

Delta starter suitable for local & remote pump control

application consisting of MPCB, overload relay and

contactors as per Type II coordination including digital

voltmeter, analogue ammeter with selector switch, run hour

meter, required protective relays & control accessories.

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION E

PVC insulated flat / round submersible copper cables (Rates

exclusive of GST) : PVC insulated flat submersible cable as

per detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228 (b) 1R x 3C x

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION E

Item Code:-3.1(b)

Single phase borewell submersible pump motor set MOC:

Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410 (Rates

exclusive of GST): category-Q-1.2, Discharge-20, Head-90,

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Chapter No:- SECTION E

Item Code:-6(1)

Single phase borewell submersible pump motor set MOC:

Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410 (Rates

exclusive of GST): category-Q-2.1, Discharge-40, Head-60,

S.O.R. = GWSSB Ele & Mech

34 SOR Year:- 2022-23 10540 Nos

Chapter No:- SECTION E

Item Code:-6(4)

Single phase borewell submersible pump motor set MOC:

Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410 (Rates

exclusive of GST): category-Q-3.1, Discharge-60, Head-60,

S.O.R. = GWSSB Ele & Mech

35 SOR Year:- 2022-23 11782 Nos

Chapter No:- SECTION E

Item Code:-6(8)

Single phase borewell submersible pump motor set MOC:

Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410 (Rates

exclusive of GST): category-Q-3.2, Discharge-60, Head-90,

S.O.R. = GWSSB Ele & Mech

36 SOR Year:- 2022-23 14418 Nos

Chapter No:- SECTION E

Item Code:-6(9)

Labour charges for Errection/Removal of submersible

pumpset from tubewell

S.O.R. = VMC -SUB.PUMP REPAIRING

37 SOR Year:- 2024-25 3821.49 Per Job

GEB connection charges shall be paid by the contractor and it

will reamburshment as per origanal MGVCL Ricept

summited by the contractor no any premium will be given on

S.O.R. =MGVCL RECEIPT

38 SOR Year:- As Per Original Receipt

Providing and erecting Pipe type earthing with 40 mm dia

mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of

SWG erected & connected as directed (For panel)

S.O.R. = R & B (Electrical)

SOR Year:- 2021-22

Chapter No:- 3-14

Item Code:- 3-14-6(B)

For using salt and charcoal / coke as required for pipe type

S.O.R. = R & B (Electrical)

SOR Year:- 2021-22

Chapter No:- 3-14

Item Code:- 3-14-6 (C )

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

41 incorporate any electronic component. for following Max. 1900 Each

rating erected as directed.(I) 25 Amp D.P Catt-ii

S.O.R. = R & B (Electrical)

SOR Year:- 2021-22

Chapter No:- 3-12

Item Code:- 3-12-1(i)

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp catt-iii

S.O.R. = R & B (Electrical)

SOR Year:- 2021-22

Chapter No:- 3-10

Item Code:- 3-10-2(A)

Providing dust and vermin proof MS cabin having two

compartments, one for panel board and other for energy meter

and fuse unit with required locking arrangement , minimum

degree of protection IP 52 as per IS 2147 fabricated from

CRCA sheer steel minimum thickness for base frame /

channel / gland plates for 3 mm for load bearing members,1.6

mm for ineternal members including cutting, bending,

drilling, welding, riveting with ineternal partitions.The sheet

steel enclosure shall be powder coated as per applicable

43 standard with shade as required with finish thickness of paint 5040 Nos

film not less than 80 microns.The cabin shall have following

dimension. (1) 0.6 M X 0.7 M x 0.4 M

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Providing dust and vermin proof MS cabin having two

compartments, one for panel board and other for energy meter

and fuse unit with required locking arrangement , minimum

degree of protection IP 52 as per IS 2147 fabricated from

CRCA sheer steel minimum thickness for base frame /

channel / gland plates for 3 mm for load bearing members,1.6

mm for ineternal members including cutting, bending,

44 drilling, welding, riveting with ineternal partitions.The sheet Nos

steel enclosure shall be powder coated as per applicable

standard with shade as required with finish thickness of paint

film not less than 80 microns.The cabin shall have following

dimension. (2) 1.5 M X 1.0 M x 0.6 M

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

Providing dust and vermin proof MS cabin having two

compartments, one for panel board and other for energy meter

and fuse unit with required locking arrangement , minimum

degree of protection IP 52 as per IS 2147 fabricated from

CRCA sheer steel minimum thickness for base frame /

channel / gland plates for 3 mm for load bearing members,1.6

mm for ineternal members including cutting, bending,

drilling, welding, riveting with ineternal partitions.The sheet

steel enclosure shall be powder coated as per applicable

45 standard with shade as required with finish thickness of paint 23407 Nos

film not less than 80 microns.The cabin shall have following

dimension. (3) 1.5 M X 1.25 M x 0.6 M

S.O.R. = GWSSB Ele & Mech

SOR Year:- 2022-23

providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size.(A) locally fabricated panel board (i) with

S.O.R. = R & B (Electrical)

SOR Year:- 2021-22

Chapter No:- 3-16

Item Code:- 3-16-1(B)(i)

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SOR Year:- 2023-24

Providing and fixing brass screw down stop tap.(C) 25mm

SOR Year:- 2023-24

Item Code:- 23030C

Excavation for pipe line trenches in sorts of soil and soft

murrum including all safety provisions using site rails and

stacking excavated stuff up to a lead of 90 M cleaning the site

etc. complete as pet the instruction of engineer-in-charge for

lifts and strata as specified. (a) Up to 1.5 M from ground

49 S.O.R. = GWSSB CIVIL 102.35 CUM

SOR Year:- 2022-23

Chapter No:- SECTION B

Item Code:-1.A.1 (a)

Back filling of trenches in thickness of 15 CM with soil

including watering, setting with hammer and displace of

additional soil in the radius of 3.0 Km as directed by site

S.O.R. = GWSSB CIVIL

50 SOR Year:- 2022-23 25.3 CUM

Chapter No:- SECTION B

Item Code:-14(1)

Pit for mud peat to make an innovative borewell and bring

water tankers for clay rugs in Mud Peat and to complete the

pit for mud peat. ( Pit size for 125,150 & 200 mm (5" 6" &

") Dia. tubewell 5 ft length x 5ft width x 6ft depth

Number Of Market Quotation :-

Lowest Market Quotation Rate :- Rs.30000

Name of Agency :-

1- Maruti Electricals

2- Khushboo Electrcals

3- Riddhi Engineers

Total Annual limit Rs. ((Part A+B+C+D+E) With Premium)= 5,00,00,0000/-