Supply And Fixing Work of Stage Motorised Curtain Control System, Wings, Cyclorama Screen with Frills, Fire Hydrant System, Auditorium Chair, Furniture, Street Light, CCTV Servileance System and T.C. With Electrical Miscellaneous Work In Auditorium Hall for C.S. No. 4577/1, Mahuva Road, Savarkundla, Dist.: Amreli Under Swarnim Jayanti Mukhya Mantri Saheri Vikash Yojana (UDP-88) Year 2025-26

NAME OF WORK : SUPPLY AND FIXING WORK OF STAGE MOTORISED CURTAIN CONTROL SYSTEM,

WINGS, CYCLORAMA SCREEN WITH FRILLS, FIRE HYDRANT SYSTEM, AUDITORUM CHAIR, FURNITURE,

STREET LIGHT, CCTV SERVILEANCE SYSTEM AND T.C. WITH ELECTRICAL MISCELLANEOUS WORK IN

AUDITORIUM HALL FOR C.S. NO. 4577/1, MAHUVA ROAD, SAVARKUNDLA

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_______Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 1,10,64,411=00 Put to Tender Rs. 1,10,64,411=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- SUPPLY AND FIXING WORK OF STAGE MOTORISED CURTAIN CONTROL SYSTEM,

WINGS, CYCLORAMA SCREEN & FRILLS @ AUDITORUM HALL

LOCATION : C.S. NO. 4577/1, MAHUVA ROAD, SAVARKUNDLA

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supply, Installation, Testing & Commissioning of MAIN MOTORISED

CURTAIN with Remote Control made out of Horizontal Sliding

Arrangement complete with fixing Rails, Brackets & Motorized

operation complete with Runners, master Runners, Pullies, 3mm

Steel wire rope, 1 HP Motor ( Crompton / Godrej ), 2-Nos. Air

Breaker Contactors ( Siemens / Schneider / L & T ), 2-Nos. Micro

Switches for Auto Stop, 3-Nos. Push buttons for Forward, Reverse

and Stop Positions. The Curtain Material High Quality Velvet (Inovativ

/ Vimal ) as per approved Colour & make with a Gathering 100 %

stiched as per site Condition. Curtain provided with Eyelets at every

200/250 mm for Uniform fixing on to curtain Ttrack / Trollies. The

Curtain should be draped to half area when in closed position.

Minimum overlap at centre should be 900mm and should be stitched

in double gathering. Apprx. Size :- 50 FT. X 18 FT. 1.00 621653.99 No

Supply, Installation, Testing & commissioning of CYCLORAMA

SCREEN with fixing 35x35x5mm MS Angle on the wall with MS

Angle hold Fasts Secured to the Wall & 40mm Dia 14G MS Pipe

welded to it as per site. 40mm Dia Pipe welded to it at 600 centers

Vertically at on angle of 45 degree & welding 40mm Dia Pipe

Horizontally to it the pipe to be soppoeted away with at 200mm

centers by MS Pipe. 12mm Dia MS hooks welded to the both ( Top &

Bottom ) The Screen Material PVC Cyclorama Cloth as per approved

sample & Fixing by Cotton Doori 6-10mm thic. Apprx. Size :- 25 FT.

Supply, Installation, Testing & Commissioning of BACK

MOTORISED CURTAIN with Remote Control made out of Horizontal

Sliding Arrangement complete with fixing Rails, Brackets & Motorized

operation complete with Runners, master Runners, Pullies, 3mm

Steel wire rope, 1 HP Motor ( Crompton / Godrej ), 2-Nos. Air

Breaker Contactors ( Siemens / Schneider / L & T ), 2-Nos. Micro

Switches for Auto Stop, 3-Nos. Push buttons for Forward, Reverse

and Stop Positions. The Curtain Material Glazzed Black Cotton

Fabric as per approved Colour & make with a Gathering 100 %

stiched as per site Condition. Curtain provided with Eyelets at every

200/250 mm for Uniform fixing on to curtain Ttrack / Trollies. The

Curtain should be draped to half area when in closed position.

Minimum overlap at centre should be 900mm and should be stitched

in double gathering. . Apprx. Size :- 50 FT. X 18 FT. 1.00 581253.99 No

Supply, Installation, Testing & commissioning of Stage Wings made

out of Fixed Wings structure designed as per site condition and

made with MS Square tube 25mmX50mm duly Painted in Black

colour with Black Glazed cotton Cloth Both Side Having manual

moving facility complete with required accessories for the rotation of

the wings, The wings material Glazed cotton Fabric as per approved

make & colour with a Gathering of 0% Stitched. 6.00 69183.99 Nos.

Supply, Installation, Testing & commissioning of Suitable Size Fills

made out of fixed Valance Bar 15 Mtrs. Length as per design made

out 25 OD mild Steel/MS Pipe Barrel, Supported to hang the Main

Valance of the stage system with Matt Black finish Paint. The Frills

Material Glazzed Cotton Fabric as per approved Colour with a

Gathering of 50% Stitched as per site condition. Apprx. Size : 50 FT.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- PROVIDING & FIXING WORK OF FIRE HYDRANT SYSTEM

LOCATION : C.S. NO. 4577/1, MAHUVA ROAD, SAVARKUNDLA

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying Of Butterfly Valve ISI Marked 100MM With necessary

Flanges, Gasket, Nut Bolts Etc. and Complete In All Respect. (Make:-

Kartar/Drp/Zoleto) 6.00 3510.00 No

Supplying Of Non Return Valve 100 MM (Make:Kartar/Drp/Zoleto) 6.00 3510.00 No

Air Release Valve 3.00 1280.00 No

Supplying Of Above Ground G.I. C-CLASS Pipe Bearing IS: 1239 ISI

Marked Pipe Including With Jointing Flanges, Clamps Supports Etc.

Complete In All Respect (Make: Asian/Apollo/ Sury Parkas) 100mm

Supplying Of 63mm Single Outlet Type Hydrant Valve Coupling

Complete In All Respect (Make:Rediance-NewAge) 12.00 6650.00 No

Supplying Of 63mm Dia Fire Hose Having 15 Mtr Length Fitted With

Necessary Coupling Binding With GI Wire Complete In All Respect.

(Make: New Age) 12.00 5800.00 No

upplying Of 63mm Dia Branch Pipe Complete In All Respect.

(Make:Rediance/New Age) 12.00 1800.00 No

Supplying Of M.S Double Door Hose Box To Accommodate Hose Pipe

And Branch Pipe, Complete In All Respect (Make:Rediance/New Age) 12.00 5265.00 No

Supplying Of FOUR Way Fire Brigade Seamless Connection With

Necessary Fitting Complete In All Respect (Make:Rediance/New Age) 1.00 6548.00 No

Supplying Of Hose Reel Drum Complete With 25mm Hose pipe Of

Mtr Length Along With Nozzle. Complete In All Respect. (Make:

Rediance/New Age) 12.00 8400.00 No

Complete Fire Alarm System Material. (Hotter, Manual Call Point &

Wiriing) 1.00 64000.00 No

5 HP Jockey Vertical Pump Set For Fire Fighting (Make: Lubi/Kirlosker) 1.00 45500.00 No

10 HP, 900 LPM Horizontal Pump Set For Fire Fighting (Make:

Lubi/Kirlosker) 1.00 65000.00 No

Auto Control Panel For 5HP Jockey / 10HP Main For Fire Fighting.

(Make: shiv shakti/anant) 1.00 55000.00 No

sprinkler 80.00 1013.00 No

Smoke Detector 80.00 850.00 No

Smoke Detector Cable 1600.00 108.00 Mtr.

Pressure Gauge 3.00 2574.00 No

Pressure Switch 3.00 3750.00 No

On/Off Switch 12.00 850.00 No

80MM Foot Valve 3.00 6156.00 No

25 MM Ball Valve 15.00 1148.00 No

ABC Type Fire Extinguisher 06-Kg New With ISI(50% MAP) (Make:

Kanex, Rediance) 12.00 2900.00 No

Co2 Type Fire Extinguisher 4.5-Kg New With ISI (PESO CERTIFIED)

(Make : Kanex, Rediance) 12.00 7020.00 No

Fire NOC FSPA Charge 1.00 22000.00 Job

Fire NOC FSCA Charge 1.00 28000.00 Job

Fire NOC Builtup Area Charge 1.00 15000.00 Job

3 Year Maintanance Charge 1.00 60000.00 Job

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- PROVIDING & FIXING OF AUDITORUM CHAIR

LOCATION : C.S. NO. 4577/1, MAHUVA ROAD, SAVARKUNDLA

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, Supplying and installation of auditorium CHAIRS TIP

UP TYPE. SEAT & HIGHBACK OF MS PAINTED FRAMESTR.

COVERED WITH PP COVER AND GLASSSHOLDER.CHAIR

MUST BE COVERED WITH UPHOLELSTERY OF APPROVED

SHED, CHIR CUSHION OF REQUIRED DENSITY (45) Moulded

Foam MUST BE COVERED WITH APPROVED SHEAD OF

FABRIC COMPLETELY. CHAIRS MUST BE FASTNED ON

FLOOR WITH FASTNERS WITH EPOXY GROUTING. complete

with all labour, materials transportation, loading, installation, all

taxes etc. complete as per directed by Engineer-in-charge (Only

Vijay Jyoti, Godrej, Penworker, TSI)

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- SUPPLY AND FIXING WORK OF FURNITURE

LOCATION : C.S. NO. 4577/1, MAHUVA ROAD, SAVARKUNDLA

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

3 SEATER FABRIC (Leather effect) SOFA - Providing Material &

Labour charges for making High quality three seater sofa as per

given detail drawings. Min 84" length & depth of seat is 22" & seat ht

18" All special ghana wooden framing. 24" of handle ht. with back

rest of soffa (35" ht )by using MR Grade plywood (IS303) with spring

and bolt and overall size is 84"X36"X36"including tipup head rest

mechanisa Legs to be made with special ghana teac wood batting

with matt finish PU polish or as selected by Engineer in-charge or

Architect. Seat area of sofa cover with 100 mm thick 40 density on

seat & above it 25 mm U foam finished with fabric. on back rest

covers with 50mm soft + 75 mm foam Make: Feather foam, sleep

well, Curlon Gold line, Hand rest & bottom front is covered reliance

fiber, as shown in detail drawing. Having the foam is sorrounded

with the layer of fabric for softness and as finishing material.

Complete with all hardwares like MS nails, SS-304 screws,

Manjarpat, spring, stappler, patta-pati, adhesives, SR, etc. Makes. D

Decor, Saron. Color and quality of composite leather is selecteed by

Engineer in-charge or Architect. Basic rate of fabric is 800 Rs/Smt.)

LAMINATES FINISH WRITING TABLE WITH SHELVES: Providing

Material & Labour charges for making study table having size of

1800 mm x 600 mm x 750 mm Ht.(hanging) having a two nos of

drawer unit of suggested sizes rest on softclose channels made with

19mm thk sandwitch marin ply. Bottom of drawer is made by 12 mm

thk marine ply. Top of table made by 19 mm sandwitch marine

sandwitch ply. Having 2 nos of vertical supports made of 19 mm

marine ply. Provision of 19 mm ply selves as per given pattern at

various lvl as suggested pattern. All exposed & internal surfaces of

drawer, study table & open shelves finish with 4 mm thk

LAMINATES finish with pu polish. All internal surfaces of drawers

are covered with 1 mm thk laminate of aproved shade. All complete

with proper hardware like locks, S.S. Screws, MS Nails, conceal

handles, etc. All Details as per shown in detail drawings & as per

instructions of architect / incharge engineer. Please see the

Attached Make List for Apporoved Makes. Basic rate of

LAMINATES is 1183 rs per sq mt.

LAMINATES FINISH WARDROBE : Providing Material & labour

charges for making 1800 mm x2100 mm wardrobe having depth of

600 mm, (as per attache detail drawing) having skirting of

mm,suggested nos of drawers having size of 600 mm x 580 mm x

125 mm, rest on telescopic channels. Ward robe Body & Inside

shelves made by 19 mm Thk. marine plywood. Back ply of ward

robe is 12 mm marine ply. Drawers are made by 19 mm ply &

botom of drawer is made by 9 mm marine plywood. All internal

surfaces are covered with 1 mm thk laminate of approved shade. All

exposed surfaces are covered with 4 mm thk LAMINATES finish

with pu polish. shutters are made with 19mm+6 mm marin ply for

conceal handles. or as suggested pattern for handles. External &

internal joints covered with teak wood bidding patti complete with

melamine polish. All complete with proper hardwares like locks for

shutters, 25 mm dia ss pipe with conceal socket, S.S. Screws,

Nails, Magnets, 450mm long S.S. Handles of & 100 mm long

handles for drawers, etc. Sizes and patterns may be varies as

suggested by architect. All fixtures and fastning must be approved

by architect/EOI as per given standard make. 7.60 9090.00 Sqmt

All Details as per shown in detail drawings & as per instructions of

architect / incharge engineer. Contractor has to provided all

necessary cut outs for Electrical works & no extra payment shall be

made for it. Please see the Attached Make List for Apporoved

Makes. Basic rate of LAMINATES is 1183.60 rs per sq mt.

FABRIC FINISH VISITOR CHAIR - Providing & Supplying of Fabric

finish visitor Chairs, having single touch adjustable seat of

appropriate sizet, Frame construction should be of nylon & black in

color having dimenssion of 1200mm Ht., 475mm width & 431 mm

Depth & Back cushion Ht. sholud be 535 mm. It should have Nylon

base Arms, Armrest is T fixed.having ht. of 260mm, It should have

minimum 5 years warranty. Complete as per instructions given by

the Architect & Engineer Incharge & as per shown in the View.

Samples should be approved by the Architect & Engineer Incharge.

Please see the Attached Make List for Apporoved Makes Make:

Hoff - Model No. Eone, or wipro, Godrej. MEDIUM BACK WITH

FABRIC FINISH VISITOR CHAIR WITH FIBER LEG REVOLVING. 2.00 4040.00 Nos.

Providing and supplying Nilkamal or equivalent brand mid-back

chair made of 100% polypropylene, a stackable chair. The color is

choicable and the material is plastic. The product dimensions are

42D x 47W x 85H centimeters, size: 1 set. The chair features a solid

back style and is without a cushion. The completion of the work is to

be in accordance with the provided drawings and instructions of the

architect and engineer in charge, with reference to the provided

image 10.00 1515.00 Nos.

HIGH BACK FABRIC (LEATHER EFFECT) CHAIR - Providing &

Supplying of High Back Chairs, having single touch adjustable seat

of size 525mm x 500mm, having adjustable tilt angle & tension with

lock to find optional position, water fall seat cushion slopes slightly

downward to help reduse stress on your legs. Frame construction

should be of aluminium & black in color having dimenssion of

1200mm Ht., 700mm width & 750 mm Depth & Back cushion Ht.

sholud be 719 mm. It should have Nylon base Arms, Armrest is 2D.

itshould have provision of Gas Lift system, WITH CROME LEG

AND FANCY ARM REST WARRANTY 1 YEAR Complete as per

instructions given by the Architect & Engineer Incharge & as per

shown in the View. Shape, design, material, colour, etc. will be

selected by Architect/Engineer In charge. Make: Hoff - Model No.

Spon (H), or Wipro, Godrej. WITH CROME LEG AND FANCY ARM

REST WARRANTY 1 YEAR 2.00 12120.00 Nos.

LAMINATE FINISH DRESSING UMIT WITH MIRROR

:Specification:- Providing Material & Labour Charges for making

dresssing table having size of 1040 mm x 300 mm & mirror up to

2.1 mt ht. MIRROR :_6 mm ply as base surface for leveling of wall

and create framing of teac wood bidding having size of 25mmx25

mm to fix the 6 mm thk superior quality mirror up to 2.1 mt lvl ht

above marine ply wood, DRAWERS:- having suggested nos of

drawer units (of size 600 mm x 440 mm x 150 mm rest on softtouch

channels made with 19 mm thk marine ply. Back of table is cover

with 12 mm marin ply. Bottom of drawer is made by 12 mm thk

marine ply. Drawers complete with conceal handles, nails, screws

etc. FINISHING :- Exposed surface of table top & drawers & framing

finished with 1 mm thk laminate of suggested shed. All internal

surfaces of drawer finish with 1 mm thk laminate. All wooden

surfaces like bidding patti of teak wood of suggested sizes used for

drawers all finished with pu polish. All fixtures and fastning must be

approved by architect/EOI as per given standard make. All complete

with proper hardware like S.S. Screws, MS Nails etc. All Details as

per shown in detail drawings & as per instructions of architect /

incharge engineer. Please see the Attached Make List for

Apporoved Makes. Use of teak wood bidding of appropriate size at

each joints. 2.00 9595.00 Cumt

Supplying and erecting approved make double ball bearing

oscillating type Heavy duty bracket fan with Aluminium Blades A.C.

23OV. 50cy/s wall mounted with height adjustment and rotary tilting

device complete with guard, wall bracket, mounting accessories as

directed. (A) 450mm 12.00 4950.01 Nos.

Supplying approved make domestic refrigerator of 165 Ltr to 185 Ltr

storage capacity, single phase minimum 3 star rating. 2.00 12668.43 Nos.

Supplying frost free domestic type double door approved make

refrigerator having minimum 3 star rating with 285 Ltr to 330 Ltr

storage capacity operating on single phase power supply. 2.00 27604.31 Nos.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- PROVIDING & FIXING WORK OF STREET LIGHT

LOCATION : C.S. NO. 4577/1, MAHUVA ROAD, SAVARKUNDLA

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200mm X 200mm X 12mm base

plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 46 kg 25.00 6874.06 No

Providing and erecting Street Light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable B

Class M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm /80mm / required size of pole top having sufficient fasteners

for fixing the brackets and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays, reducer and with

check nuts complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following

nos of arms. [A] Single Arm Bracket 1.5 Mtr 25.00 626.20 No

Supplying and erecting LED street light / Flood light fittings with High

power White LEDS wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/ watt . LED driver efficiency > 85% as per approved

vender list make.( fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (B) Flood Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (i) above 20 to 30 watts Cat-

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark 25.00 270.68 No

Supplying and erecting Flexible PVC insulated multi strand multi core

1.1 kv grade ISI marked copper wires of following size to be erected

as directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 125.00 44.44 Rmt

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables (A) 4 core 4 Sq. mm 625.00 115.14 Rmt

Supplying and erecting “ B ” class Galvanised iron pipe having

smooth finished bore of the pipe on both ends erected nuts and bolts

along the pole / wall shaping the pipe as per site requirement. Pipe

dia as following. (c) 40mm dia. 40.00 249.47 Rmt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II) with necessary

connecting accessories of same material at required depth in

existing trench for laying of cable. below ground / road surface for

enclosing cable (A) 50mm dia. 787.50 62.62 Rmt

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work finishing with plaster

etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated

paint. section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle. 1.00 1884.66 No

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed 1.00 3168.37 No

providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. 1.00 6173.12 No

Providing & erecting electronic overload relay with single phasing

preventer [ (L&T, Alstom, BCH,T.C., Siemens, C&S make). [A] for

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

2 NC aux contacts complete with 415V/220V operating coil suitable

for (L&T, BCH,T.C., Siemens, C&S make). (a) for 25 / 32 A rating 1.00 3253.21 No

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

wire. 25.00 368.65 Each

For using salt and charcoal / coke as required for pipe type earthing. 25.00 171.70 Each

Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 750.00 46.46 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- PROVIDING & FIXING WORK OF CCTV SERVILEANCE SYSTEM

LOCATION : C.S. NO. 4577/1, MAHUVA ROAD, SAVARKUNDLA

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supply, Installation, Testing & Commissioning of 1/3'' 2MP,

1920x1080p full HD IR Dome Camera with built in IR Corrected 2.7 to

12 mm , H. 265+, Min 30mtr IR distance auto varifocal lens, IP 66 rated

outdoor housing with IK 8 vandal protection, Intelligent noise reduction,

BLC, White Balance, Min. 4 Privacy mask, Min. 75dB WDR, B&W.

ONVIF Compliant CE, FCC, EN & UL Certified As Per Tender

Technical Specification Brand List As Per Approved By Consultant/

Nagarpalika and the quoted rate is including Transportation, Material

and Labour, Etc Complete 17.00 3383.50 No

Supply, Installation, Testing & Commissioning of 1/3'' 4MP,

1920x1080p full HD IR Dome Camera with built in IR Corrected 2.7 to

12 mm , H. 265+, Min 30mtr IR distance auto varifocal lens, IP 66 rated

outdoor housing with IK 8 vandal protection, Intelligent noise reduction,

BLC, White Balance, Min. 4 Privacy mask, Min. 75dB WDR, B&W.

ONVIF Compliant CE, FCC, EN & UL Certified As Per Tender

Technical Specification Brand List As Per Approved By Consultant/

Nagarpalika and the quoted rate is including Transportation, Material

and Labour, Etc Complete 7.00 3787.50 No

Supply, Installation, Testing & Commissioning of 1/3", 2MP,

1920x1080p full HD Dome Camera with built in IR Corrected 2 to

mm, Intelligent noise reduction, BLC, White Balance. Min. 4 Privacy

mask Min. 120dB WDR, B&W. ONVIF Compliant, CE, FCC, EN & UL

Certified As Per Tender Technical Specification Brand List As Per

Approved By Consultant/ Nagarpalika and the quoted rate is including

Transportation, Material and Labour, Etc Complete 4.00 5100.50 No

Supply, Installation, Testing & Commissioning of 1/3'' 2MP,

1920x1080p full HD IR Bullet Camera with built in IR, Min 20mtr IR

distance lens, IP 66 rated, Intelligent noise reduction, BLC, White

Balance, Min. 4 Privacy mask, Min. 75dB WDR, B&W. ONVIF

Compliant CE, FCC, EN & UL Certified As Per Tender Technical

Specification Brand List As Per Approved By Consultant/Nagarpalika

and the quoted rate is including Transportation, Material and Labour,

Supply, Installation, Testing & Commissioning of 6 TB Survelliance

Hard disk with 6 GB/s transfer rate of Seagate/WD Make with 3 year

warranty As Per Tender Technical Specification Brand List As Per

Approved By Consultant/ Nagarpalika and the quoted rate is including

Transportation, Material and Labour, Etc Complete 4.00 18432.50 Rmt

Supply, Installation, Testing & Commissioning of 64 Channel Network

Video Recorder (NVR) with VMS Software & 4 SATA Supported. VMS

Software is to be installed as well as a copy of the software As Per

Tender Technical Specification Brand List As Per Approved By

Consultant/Nagarpalika and the quoted rate is including Trnsportation,

Material and Labour, Etc Complete 1.00 50449.50 Rmt

Supply, Installation, Testing & Commissioning of 1 KVA UPS with

30min backup including supply of sealed maintennace free battery of

rating 12V, 500VA As Per Tender Technical Specification Brand List As

Per Approved By Consultant/ Nagarpalika and the quoted rate is

including Transportation, Material and Labour, Etc Complete 1.00 14645.00 Rmt

Supply, Installation, Testing & Commissioning of 43 Inch LED 2 year

warrenty As Per Tender Technical Specification Brand List As Per

Approved By Consultant/Nagarpalika and the quoted rate is including

Transportation, Material and Labour, Etc Complete

Supply, Installation, Testing & Commissioning of 4 X 2 POE, Network

Switch having operating temperature upto 50°C As Per Tender

Technical Specification Brand List As Per Approved By Consultant/

Nagarpalika and the quoted rate is including Transportation, Material

and Labour, Etc Complete 4.00 2110.90 No

Supply, Installation, Testing & Commissioning of 8 X 2 POE, Network

Switch 4.00 3585.50 No

Supply, Installation, Testing & Commissioning of 8 port Giga loaded

patch panel As Per Tender Technical Specification Brand List As Per

Approved By Consultant/Nagarpalika and the quoted rate is including

Transportation, Material and Labour, Etc Complete 2.00 4999.50 No

Supply, Installation, Testing & Commissioning of 2 core electric cable

As Per Tender Technical Specification Brand List As Per Approved By

Consultant/Nagarpalika and the quoted rate is including Transportation,

Material and Labour, Etc Complete

Supply, Installation, Testing & Commissioning of wall mountable

network rack of 12U capacity and As Per Tender Technical

Specification Brand List As Per Approved By Consultant/Nagarpalika

and the quoted rate is including Transportation, Material and Labour,

Supply of Cat 6E UTP Cable As Per Tender Technica Specification As

Per Tender Technical Specification Brand List As Per Approved By

Consultant/Nagarpalika and the quoted rate is including Transportation,

Material and Labour, Etc Complete

Supply, Installation, outdoor POE box plastic As Per Tender Technical

Specification Brand List As Per Approved By Consultant/ Nagarpalika

and the quoted rate is including Transportation, Material and Labour,

Etc Complete 8.00 767.60 No

Supply, Installation, Testing & Commissioning of 19 mm PVC Conduit

with all accessories As Per Tender Technical Specification Brand List

As Per Approved By Consultant/Nagarpalika and the quoted rate is

including Transportation, Material and Labour, Etc Complete

Supply, Installation, 5 X 5 PVC Box As Per Tender Technical

Specification Brand List As Per Approved By Consultant/Nagarpalika

and the quoted rate is including Transportation, Material and Labour,

Etc Complete 40.00 80.80 Nos

Installation, Testing & Commissioning of CCTV camera & junction box

for connector As Per Tender Technical Specification Brand List As Per

Approved By Consultant/ Nagarpalika and the quoted rate is including

Transportation, Material and Labour, Etc Complete

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala

SAVARKUNDLA NAGARPALIKA - SAVARKUNDLA

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA YEAR-2025-26

NAME OF WORK :- SUPPLYING, FIXING OF T.C. & ELECTRICAL MISCELLANEOUS WORK

LOCATION : SAVARKUNDALA

SCHEDULE - "B-7"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing, erecting, testing & commissioning approved make oil

immersed ONAN cooled, double wound, core type indoor / outdoor

copper wound 11KV/ 433V step down transformer of following

capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed

system continuously rated for a full temperature rise in oil not

exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C.

complete with necessary radiator first filling of new transformer oil &

standard fitting as below complying with IS 1180 (Part 1) :2014

standards with energy efficiency level 2 Off load tap changing range

steps +2.5% to -5% on H.V for variation should be provided. The H.V.

shall be connected Delta & Secondary with star connection. The

transformer should have cable-end boxes on H.T. side suitable for up

to 3 core 150 sq.mm. XLPE cable & on L.T. side suitable for bus duct

or cables as per requirement complete with test certificates from

1. Oil conservator with filling Hole & Cap-One No. 2. Thermometer

pocket with 6" dial type thermometer switch alarm & trip contacts-

Two nos. 3. Silica-gel breather with charge- One No. 4. Plain oil level

gauge - One No. 5. Drain / Sampling / Filter valve- One No. 6. Top

Filter Valve - One No. 7. Explosion vent with Diaphragm One No.

Rating & Diagram plate - One No. 9. Additional neutral bushing for

earthing - One No. 10. Bi directional Roller - Four Nos. 11. Earthing

terminals - Two Nos. 12. Lifting lugs - Two Nos. 13. Air release plug. -

One No. 14. Double float buchholz relay with Alarm and trip contacts.

15. Control cable as required from Transformer to VCB Panel is to be

provided with necessary connection to VCB relays for protection as

per IS 1180 level-2 (a) 250 KVA Max. allowable loses at 50% of

rated load is 0.98 KW and at full load is 2.93 KW Cat.III 1.00 670987.44 No

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with necessary

accesories, supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley

as per requirements & instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber gasket,

heavy duty end terminal connection, danger notice board, necessary

ventilation, earthing strip complete. The Panel shall be painted with

epoxy powder coating.

The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size.

(ii) With 550 mm. Depth 1.00 16018.60 No

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 KA and above at

415 V having Normal current rating 400A. with variable Thermal &

magnetic release suitable to work on A.C.supply 50 c/s. With all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III 1.00 29769.75 No

Supplying & erecting approved make Four Pole 415V change over

switch interior for panel mounting with operating mechanism A.C.23

duty confirming to IS for (F) 400A Cat-III 1.00 26260.00 No

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at 415 V,

having normal current rating up to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III 10.00 7282.10 No.

Operational Handle Assembly Complete for (ii) 200 250/ 320/ 400/

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS:8828 in

existing box having following capacity (c) 63 Amp Cat.III 5.00 868.60 No.

Supplying & erecting approved make RCCB + MCB (Electro magnetic

type only) working on residual current device having 10 KA short

circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec.

tripping time conforming to IS 12640 test knob facility trip free

mechanism operating for rated leakage at nominal ten volt, complete

erected including all materials lugs screws etc. completed. [f] 63A,

pole Three Phase Cat. II 3.00 3343.10 No

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged

door with rubber gasket and necessary busbar supports with

Aluminium busbar having current density not more than 0.8 Amp. /

sq.mm (Rated current / cross section area) duly wrapped with colour

insulation tape for phase sequence, three phase & neutral each

Suitable for following current capacity with necessary painting

mounted on wall or pedestal frame of required size with necessary

connections. (D) Suitable for 400 Amp. capacity 5.00 6787.20 Rmt

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (K) 300 Sq.mm. 5.00 116.15 Rmt

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm 3.00 9.09 No.

Supplying & erecting XLPE (IS:7098) (1)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size. (N)

core 16 Sq. mm 7.00 853.45 Rmt

Disconnecting the cable connection and Providing straight joint with

PVC mould using heat shrink /cast resin type epoxy compound

Insulating material and making the joint complete using necessary in

line connectors, hardener, earth continuity connection, spacers etc.

and reconnecting the same & ensure the joint resistance within the

limits as per IS. (B) 35 to 95 Sq. mm cable. 2.00 1828.10 No.

Providing and erecting XLPE (IS:7098)(1)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor

of following size of cables. (B) 4 core 4 Sq. mm 270.00 426.22 Rmt

Providing and erecting XLPE (IS:7098) (1)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor

of following size of cables. (B) 4 core 16 Sq. mm 500.00 1160.49 Rmt

Providing and erecting XLPE (IS:7098) (1)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

cables (1) 3 1/2 core 240 Sq. mm (120 Sq. mm 1/2 core) 110.00 1369.56 Rmt

Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6" X

3" 'I'-Section Girder, 4" x 2"channels, clamps, nuts, bolts etc. Suitable

for erection of the followings duly connected with necessary ACSR

conductors. as per drawing approved by the Engineer- in charge

complete with following. Height as per IS 7 Mtr above ground) (A)

KV 200 Amps Drop out fuses with S.R.B.P. tubes carries.-Three nos

(B) 11 KV G.O.D. switch complete with insulators, operating handle

with galvanised pipe, Sq.bar etc. 400 Amp. One Set (C) 11 KV

lightening arrestor with clamp Nos. (D) 11 KV shackle insulators-Six

Nos. Three (E) The above D.P. structure should be earthed with

25mm x 3 mm thick double copper earth strips run separately and

connected with separate copper plate earth electrode. 1.00 116150.00 No.

Providing and erecting cable end termination kit, heat shrinkable Push

on type Densons'/ 'Raychem'/Elastimold make suitable for 11 KV

XLPE cable 3 core 50 & 70 Sq.mm (A) Outdoor type 2.00 15150.00 No.

(B) Indoor type 2.00 7898.20 No.

Providing and erecting ISI Marked 3 core 95 Sq.mm XLPE insulated

11 KV armoured cable Aluminium conductor IS-7098 to be laid on

wall with clamps or in provided cable trench / pipe approved manner

as directed. 30.00 1616.00 Rmt

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (approved make OEM has to submit test

certificate including value of earth resistane of installation. [C] For

Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System (like

Automation, SCADA) i.e. independent Earthing located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.Length of Pipe:

Mtrs.Back filling Compound 2 nos Bags of 25 Kg. 7.00 12498.75 No.

providing and erecting Cast iron earth plate size 30 X 30 X 0.35 cms.

buried in specially prepared 2.5 Mtr. deep earth pit complete with

necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug

for earthing of switch gear, conduit run or power plug etc. 7.00 808.00 No.

For using salt and charcoal / coke as required for pipe type earthing. 7.00 202.00 No.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Savarkundala Nagarpalika

Amreli Savarkundala

Chief Officer President

Savarkundala Nagarpalika Savarkundala Nagarpalika

Savarkundala Savarkundala