WELCOME MAINT SERVICES TO MD ACCN AT ZONE 5, ZONE 1 (B), 1 (C) AND REPAIR AND REPLACEMENT OF OLD LIGHT FITTINGS INTO LED LIGHT AT SAA UNDER GE (S) TEZPUR

Amount

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.All as specified and as directed by Engineer-in-charge.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.All as specified and as directed by Engineer-in-charge.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each .All as specified and as directed by Engineer-in-charge.

Taking down of shutters of any description n.exc 1.00 Sqm and each .All as specified and as directed by Engineer-in-charge.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.All as specified and as directed by Engineer-in-charge.

Refixing of shutters of any description n. exc 1.00 Sqm each in same opening including of taking down, easing, adjusting and refixing/renewal of builders hardware as required including renewal of unserviceable screws, etc.All as specified and as directed by Engineer-in-charge.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement.All as specified and as directed by Engineer-in-charge.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.All as specified and as directed by Engineer-in-charge.

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately).All as specified and as directed by Engineer-in-charge.

S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube All as specified and as directed by Engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified and shown on drawing.All as specified and as directed by Engineer-in-charge.

S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.All as specified and as directed by Engineer-in-charge.

S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.All as specified and as directed by Engineer-in-charge.

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.All as specified and as directed by Engineer-in-charge.

S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long.All as specified and as directed by Engineer-in-charge.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.All as specified and as directed by Engineer-in-charge.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.All as specified and as directed by Engineer-in-charge.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.All as specified and as directed by Engineer-in-charge.

S & F in repairs 300 mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

S&F in repairs 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix, steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete with glazing bars, donetailed or welded all as soecified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.All as specified and as directed by Engineer-in-charge.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.All as specified and as directed by Engineer-in-charge.

Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame works, glazed with putty or fixed with beads.All as specified and as directed by Engineer-in-charge.

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters all as specified and directed by Engr-in-Charge

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F in repair of pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work thickness of 12 mm complete all as specified and directed.

Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.

S & F Continuous (piano) hinges, 30 mm width of flaps ,mild steel, bright finish or electrogalvanised complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.All as specified and as directed by Engineer-in-charge.

All as per item No 33 above but in skirting over 10mm thick screeding in cement mortar 1:4

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.All as specified and as directed by Engineer-in-charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. All as specified and as directed by Engineer-in-charge.

S&F Coloured Glazed ceramic tiles 300x200mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. All as specified and as directed by Engineer-in-charge.

M/L Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform.

M&L 18-20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4.All as specified and as directed by Engineer-in-charge.

M&L for chequered cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.

M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

Material and labour for burnt modular brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar ( 1:6) All as specified and as directed by Engineer-in-charge.

Material and labour for burnt modular brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) All as specified and as directed by Engineer-in-charge.

Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc.All as specified and as directed by Engineer-in-charge.

M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately)

M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .All as specified and as directed by Engineer-in-charge.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

Supply only water proofing compound. Conforming to IS -2645.

M&L preparation of newely plaseter surfaces and appplying two coats of weather coat(Apex) over two primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L Applying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

Material and labour for applying three coats of white wash on walls including preparation of new or previously untreated surfaces all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

Supply and fix,as in repair,15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs kitchen plate rack made out of stainless steel 0.63 mm thick sheet with partitions and size of rack 800 x 250 x 900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed. Nirali /Anjali/Prayag/Bluestar

Supply & fix as in repair curtain harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. with two Nos of socket and brakets complete for doors/window opening all as specified and directed

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed

Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.

Supply and fix, as in repairs, plastic water closet seat, closed pattern with flat bottom, and cover for water closet pan (padestan pattern) all as specified and directed.

S&F in repair brass choromium plated towel rail 600 mm long complete all as specified and directed.

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws.All as specified and as directed by Engineer-in-charge.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair 15mm bore dia brass choromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs bathroom mirror cabinet size of 450 x 350 mm with all necessary fittings complete all as specified and directed. Make- Prayag Cat no.557

S&F in repairs center hole basin mixer without pop-up waste system complete all as specified and directed. Make- Prayag Cat no.6750

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed. Make - Nirali /Anjali/Prayag.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Supply and fix,as in repair, CP 40mm dia waste coupling with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for complete all as specified and directed.

S&F in repairs grating 100mm dia of PTMT (minimum weight 25 gms) all as specified and directed.

Supply and fix, as in repair, Overhead Shower 100 mm dia Round Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd.

Supply and fix, as in repairs, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

Supply and fix, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

Supply and fix, as in repair, steel handles for steel window for left and right side shutter all as specified and directed

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No 86 here in before but 20 mm bore.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

All as per item No 88 here in before but 20 mm bore.

S&F as in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as directed

Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

Supply & fix radiant door bottom sealing strip guard (door seal) complete all a specified and directed.

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L Applying one coat of Oil bound distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L Applying two coat of Oil bound distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L Applying two coat of Oil bound distemper with a coat of primer to old wall surfaces of walls and cornices all as specified and directed

Material and Labour for applying one coats of plastic emulsion paint including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed complete all as specified and directed by Engr-in charge .

Material and Labour for applying two coats of plastic emulsion paint including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed complete all as specified and directed by Engr-in charge .

Material and Labour for applying two coats of plastic emulsion paint with a coat of primer to old wall surfaces of walls and cornices all as specified and directed by Engr-in charge .

M&L for 1 mm thick wall care putty including even and smooth surface after complete removal of existing treatment complete all as specified and directed by Engr-in charge .

M&L for complete removal of existing treatment and plaster by the use of wire brush and applied a coat of Dr fixit super latex with cement ratio of 1:1.5 in both horizontal and vertical direction after that applied Dr fixit super latex with water complete all as specified and directed by Engr-in charge .

Material and labour for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.

M&L for applying for preparation of old painted surfaces of wood and wood base surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for applying for preparation of old painted surfaces of wood and woodbase surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.

Supply and fixing in Replacement of LED batten with tube not less than 1x 20 watt ,6500K,system luminous efficacy more than 100lm/W with high quality aluminium extruded with decorative end caps with three year warranty including taking down old light fittings any description,capacity and size including disconnection of all electric connections and removing unserviceable materials off the site of work and makng good disturbed surfaces of walls ,ceilings etc complete all as per manufacturer's instructions.Make :- Make-Phillips/Jaquar/Wipro (Note:-(1) A certificate /Job card signed by JE incharge will be collected from each quarter clearly highlighting Nos of electrical fittings replaced will be collected,the same deemed to be included in the unit rate.(2) Every fitting will be printed with CA No and year of GE(S) Tezpur.(3) 2% Buffer stock will be submitted to MES store to replace the malfuctioned LED fittings for the said warranty period.The rate deemed to be included in the quoted rate.(4).Materials/Accessories/Equipments for which MAKE have not been specified in the Particular Specifications, shall be of Standard Makes having approval of HQ Chief Engineer Eastern Command or E-in-C’s Branch and shall strictly comply with Current Appropriate IS Specifications, for which IS Specification has not been issued/available, they shall comply with the Currents BS Specifications or as approved by GE.)

Supply and fixing in Replacement of wall mounted LED batten aluminium housing & integrated elctronic driver ,LED light fittings flicker free ,instant start with uniform light distribution not less than 10W 2 feet indoor decorative with 2core copper wire from ceiling rose to light fittings all as complete all as per manufacturer's instructions.Make-Phillips/Jaquar/Wipro (Note:-(1) A certificate /Job card signed by JE incharge will be collected from each quarter clearly highlighting Nos of electrical fittings replaced will be collected,the same deemed to be included in the unit rate.(2) Every fitting will be printed with CA No and year of GE(S) Tezpur.(3) 2% Buffer stock will be submitted to MES store to replace the malfuctioned LED fittings for the said warranty period.The rate deemed to be included in the quoted rate.(3)Materials/Accessories/Equipments for which MAKE have not been specified in the Particular Specifications, shall be of Standard Makes having approval of HQ Chief Engineer Eastern Command or E-in-C’s Branch and shall strictly comply with Current Appropriate IS Specifications, for which IS Specification has not been issued/available, they shall comply with the Currents BS Specifications or as approved by GE.)

S & F in replacement of 18 Watt LED fitting surface mounted ( Squre Type) , 6500k, colour temp >= 5700K with die cast body with premier diffuser ensuring glare free light downlighter of size 180X180mm height 16mm all as specified and directed by . make-Crompton/ philips/bajaj

S & F in replacement of 15 Watt LED fitting surface mounted (Round Type) , 6500k, colour temp >= 5700K with die cast body with premier diffuser ensuring glare free light downlighter of size 200mmX 69mm all as specified and directed by make-Make-Phillips/Havells/Jaquar/Wipro/CG/Bajaj

S & F in replacement of surface mounted, decorative hexagon bulk head IP66 for 10 Watt LED fitting fixture with diffuser to comprising of high brightness light including all its accessories all as specified and directed . make-Make-Phillips/Havells/Jaquar/Wipro/CG/Bajaj

Supply and fixing in replacement of of recessed dust free LED fitting 24 watts soft light glare free homogenous illumination very high efficiency enviormental friendly long life of suitable for T- grid celing and modular celing application complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting of size (LxWxH) 595x595x70mm complete all as specified and directed. make-Make-Phillips/Havells/Jaquar/Wipro/CG/Bajaj

S & F in replacement of low hight ceiling ( hanging type) for 36 Watt LED fitting with all its accessories of size (LxWxH) in 1283x163x46mm all as specified and directed . make-Make-Phillips/Havells/Jaquar/Wipro/CG/Bajaj Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

MD. LATIFUL AHMED HUSSAIN

M/S BHAGWATI CONSTRUCTION CO.

Chinmay Traders

THE BUILDERS

M/S GOSWAMI ENGINEERING

Sibson Constructions And Co

MAHANTA ENTERPRISES

M/s Brahamaputra Wood Industries

M/S M N ENTERPRISE

M/S Manjit Singh

M/S Deep-Jeet

Anil Kumar Sarmah