Shifting of HT/LT overhead line from Kargi Chawk to Kali Mandir and Kali Mandir to Lalpul Patel Nagar due to road widening on turnkey basis against e tender no. 01/EDC(U)/2022-23

MATERIAL

Stay wire 7/10 swg

Stay set 16x1800 mm

ST Pole 8.5 mtr long SP-23(Bottom portion hot dip Galavanized)

ST Pole 11 mtr long SP-55 (Bottom portion hot dip Galavanized)

Stay set 20x1800 mm

Stay wire 7/8 swg

MS Angle 75x75x8 mm. (4 mtr. on DP & 2.2 mtr on SP )

MS Channel 100X50 mm

MS angle 65x65x6 mm.

LT XLPE Cable 1x240sq.mm

LT XLPE Cable 1x120sq.mm

GI wire 8 SWG

GI wire 6 SWG

Earthwire 7/16 SWG ( 1000 m @ 110 Kg./Km. + 3% C&W)

Earthing rod 20x2500mm

Disc fitting for w/r 45 kn

Disc fitting for Dog / Racoon

ACSR Rabbit conductor for street light

ACSR Dog conductor ( 3X300+3X3100+4X400 + 3% Sag)

ACSR weasel conductor for jumpering on double poles/Tranformers

9 KV 5 KA Lightening Arrestor

MS Channel 125x65x6 mm

33 KV Pin insulator with pin (polymer)

11 KV Pin insulator Polymer type

11 KV G/O Switch

11 KV Disc Insulator Polymer type

LT AB Cable 3X120+1x95+1x16 sq mm

33 KV Disc Insulator Polymer Type

De-Centralized Material

Al crimping lug of size 70 sq.mm

Al crimping lug of size 120sq.mm

Al crimping lug of size 240sq.mm

Barbed Wire

Bracing clamp (made of MS flat 65x6 mm) with nut & bolt

Danger Board with clamps, nut & bolt

Earth wire clamp (made of MS flat 50x6 mm)

Holding clamp for LT Fuse set of MS flat 50x6 mm.

F clamp (made of MS flat 50x6 mm) for 11 KV pin insulator

F clamp (made of MS flat 75x8 mm) for 33 KV pin insulator

LT Clamp(made of MS flat 50x6 mm) for SP-23 with nut and bolt

LT Clamp(made of MS flat 50x6 mm) for SP-55 with nut and bolt

LT Shakle insulator (100x115 mm)with nut and bolt

PG Clamp for Dog to Dog Conductor 3/4 bolted

PP/fixing clamp (made of MS flat 65x6 mm) for SP-23 with nut and bolt

PP & clamp(made of MS flat 50x6 mm) with nut & bolt

Distribution box 3-ph with holding clamp with n&b

Piercing connector 120/95

Piercing connector 95/25

Dead end clamp

Suspension type clamp

Stay clamp( made of MS flat 65x6) with nut & bolt SP-55

Stay insulator for 33 KV with all fitting

Stay insulator for 11 KV with all fitting

LABOUR CHARGES

Cartage of ST pole and PCC Poles from store centre to construction site with loading, unloading at both points

Other stock material

Head Load Cartage

Other stock material

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole

Erection of following Single support pole in proper level and alignment alongwith fixing of all accessories, like top channel & clamps as per RESSPO construction Manual.

Erection of following Double support pole in proper level and alignment alongwith fixing of all accessories

ST Pole SP-55

Erection of following Four pole support in proper level and alignment alongwith fixing of all accessories.

SP-55 (11KV/33KV)

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal

Muffing of poles size 0.45 cm x 0.60 cm radious with cc 1:3:6 (1 cement : 3 coarse sand

Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESSPO sehedule and local approved drawing.

Fixing of D-type bracket in LT line

Fixing of Extension bracket in 11 KV line

Fixing of Extension bracket in 33 KV line

Excavation of earth for Stay pit of size 0.6x0.6x1.2mtr in all type of soil including proper dressing

Fixing , tightening and nozzaling of Stay with pole and stay rod

11 KV line

33 KV line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod 48 pole earthing + 38 L/A & Boby Earthing Of TF

Laying, Spreading, Stringing and sagging following conductor (3 ph 4 wire including earthwire as the extra wire)

Dog CONDUCTOR ( for 33 kV)

Dog CONDUCTOR ( for 11 kV)

Laying, Spreading, Stringing and sagging of LT line (3-ph, 5 Wire)

Dog CONDUCTOR (for LT)

Jumpering of distribution transformers and making proper connection with ACSR weasel conductor

Guarding of Line over (Telephone / Road / L.T. line crossing as per drawing with 6/8 SWG G.I. wire including fixing of guarding channel/ angle as per RESSPO manual. L.T./11KV /33KV

11KV Line.

33KV Line.

Mounting & Fixing of TPMO on double pole structures including making of connections complete work

Mounting & Fixing of Fuse sets on double pole structures including making of connections complete work

Mounting and Fixing of Lightning arrestor set (3 Nos.) on double pole

Painting of poles with angle and channel and all steel part

ST Pole SP-23

ST Pole SP-55

Dismantling of TPMO /fuse set on double pole structure.

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Single Pole

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Double Pole

Dismantling of existing LT/HT line. including disc fitting, Insulator, clamps, Nut & Bolts Four Pole

Dismantling of 33 KV Line WITH DOG CONDUCTOR

Dismantling of 11 KV Line WITH DOG CONDUCTOR

Dismantling of LT Line (including street light wire) WITH DOG CONDUCTOR

Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc.

Installation / mounting of new Tranformer on plinth pole structure On Double Pole

Providing and fixing of Danger Board and number plate

Dismentling of AB cable

laying of AB cable

Relaying of above dismentteled AB cable

Connecting of GI Plate eathing with Transformer/Panel with lap welding including bending or other required work etc. GI strip shall be laid down upto the neutral & T/F body seperately in one piece. Test result of earthing shall be provide by contarctor. Acceptable results shall be within 3 ohm.

DISMENTLING OF L.T. PVC CABLE 1X120CMM2

DISMENTLING OF L.T. PVC CABLE 1X240CMM2

Dismantelling and remounting of metring cubical after completion of erection work

Dismentling and Remounting of sectionlizer

Back carriage of following

ST POLE 23/ 55/METABLE /CHANNEL/ANGLE/SCRAP

CODUCTOR SCRAP

Laying and erection of L.T. PVC single lead Cable including crimping of lugs of size 1x120/240

Making of section pole for existing LT/HT line complete in all respect.

SHIV ELECTRICALS