Site Survey, Designing, Engineering, Procurement, Supply, Loading, Transportation, Unloading, Insurance, Delivery at Site, Handling, Storage, Installation, Testing, Commissioning Including Documentation of All Items/Material required to complete works for Turnkey Based Contract For Conversion of Existing 11 kV HT Line and LT Line Network Including Consumer Service Lines Into Under Ground Cable Network With Ring Main System at Diamond Chowk Sub Division of Bhavnagar Circle Under PGVCL with GIS Mapping / Geo Urja Mapping (Developed by GUVNL) and Asset Tagging under SI SCHEME (Package-65)

Conversion of Over Head to Underground Network

Diamondchowk Sub Division of Bhavnagar Circle

Particulars of Item Grand Total in Rs.

Particulars of Item Grand Total in Rs.

SCHEDULE-B1: CONVERSION OF EXISTING OVERHEAD ELECTRICAL HT

NETWORK IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

SCHEDULE-B2: CONVERSION OF EXISTING OVERHEAD ELECTRICAL LT NETWORK

IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

A TOTAL AMOUNT (WITHOUT GST & CESS)

A TOTAL AMOUNT (WITHOUT GST & CESS)

3 BIDDER'S OFFER ( + / - ) IN % 0.00%

4 BIDDER'S OFFER ( + / - ) IN RUPEES

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST & CESS)

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST & CESS)

5 Welfare cess @ 1% ON "B"

C TOTAL AMOUNT (WITH WELFARE CESS)

C TOTAL AMOUNT (WITH WELFARE CESS)

6 GST @ 18% ON "C"

D GRAND TOTAL (WITH GST & WELFARE CESS)

D GRAND TOTAL (WITH GST & WELFARE CESS)

Date Signature of Bidder Stamp

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

SCHEDULE-B1: CONVERSION OF OVERHEAD TO UNDERGROUND HT ELECTRICAL NETWORK

RMU : Supply,Installation,Testing & Commissioning of 11 KV SCADA, Non-

SCADA Ring Main Unit SF6 Gas Insulated as under preferably Siemens/

Schnieder/ABB/CG. (Including RCC foundation,masonry and all civil works,

as per approve drawing by DISCOM)

b SF6 Ring Main Unit with SCADA switching facility 630 A extensible.

i (a) 11KV SCADA RING MAIN UNIT 3 ISOLATOR (3-WAY) Nos. 12 527677.50 6332130.00 12 10751.35 129016.20

(b) 11KV SCADA RING MAIN UNIT 1 CIRCUIT BREAKER 2 ISOLATOR (3-

(c) 11KV SCADA RING MAIN UNIT 1 CIRCUIT BREAKER 3 ISOLATOR (4-

(d) 11KV SCADA RING MAIN UNIT 2 CIRCUIT BREAKER 2 ISOLATOR (4-

UG Distribution Transformer: Supply,installation,Testing &

commissioning of 11/0.433KV, Outdoor Transformers with HV/LV cable

end Boxes and CTs commissioned at LV end boxes for the following

ratings (Transformer shall be suitable for pole mounting upto 315 kVA

and Plinth mounting for 500 kVA(Including plinth/structure) as per

standard technical specification

b 200 KVA, Aluminium wound,Aluminium Wound CRGO/Amorphous core. Nos. 156 404967.90 63174992.40 156 14297.95 2230480.20

Supply,installation,Testing & commissioning of 11 kV,(E),XLPE

insulated Aluminium Conductor, Armoured cable, Sand as per

3 enclosed specification, including rates for approval of local

Authorities for laying of cable.(Make as approved by GUVNL) With

excavation,sand, back filling as per specification

d 3 core 95 sq. mm. for TC termination ( RMU to TC ) Mtrs. 2200.00 768.20 1690040.00 2200.00 385.25 847550.00

Providing and Laying of HDPE ducts confirming to IS:4984 having dia.

OD/ID 110/99.10mm, 6kg/cm2, 11.63 kg/6 RMT at a minimum depth of

1200mm below the road surface by push through method by drilling the

4 road with HDD machine without breaking the road surface for laying of Mtrs. 34706.32 603.75 20953938.29 34706.32 948.75 32927617.31

cable for internal GIDC road crossing for enclosing HT/LT XLPE insulated

aluminum armoured cable up to 300 sqmm through the duct as per the

instructions of EIC (Engineer In Charge).

OUTDOOR TERMINATION KIT: HT

push on/heat shrink type end termination preferably 3m(m-seal) or

Raychem make at switchgear end boxes,transformer(PAD/Pole mounted)

5 for 3 core 11 kV XLPE Aluminium Conductor Armoured cable as specified

with connection of leads including cutting,stripping of cable,

insulations,providing compression type terminals,crimping of lugs with

suitable crimping tool.outdoor application

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

INDOOR TERMINATION KIT : HT push

on/heat shrink type end termination preferably 3m(m-seal) or Raychem

make at switchgear end boxes, transformer (PAD/Pole mounted) for 3 core

6 11 kV XLPE Aluminium Conductor Armoured cable as specified with

connection of leads including cutting, stripping of cable, insulations,

providing compression type terminals, crimping of lugs with suitable

crimping tool for Indoor application

STRIGHT JOINT KIT: HT push

on/heat shrink type straight joint preferably 3m(m-seal) or Raychem make

for up to 3 core 300/240/185 Sq mm 11 kV XLPE Aluminium Conductor

Armoured cable as specified with connection of leads including

cutting,stripping of cable, insulations,providing compression type

terminals,crimping of lugs with suitable crimping tool..

8 Lying of all types of cable in trench(without Excavation) Mtrs. 1779.32 172.50 306931.98

9 Lying of cable on pole Mtrs. 2191.00 43.70 95746.70

10 Lying of the cable in the Pipe(Without Excavation) Mtrs. 88.97 57.50 5115.53

11 Drilling work in Road Crossing through push through Mtrs. 88.97 569.25 50643.78

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation with back

filling as per the specification of cable lying)

Supply and fixing of GI Pipe on wall/Pole (100 mm Dia Medium Duty pipe

13 with rubber gland at both ends to avoid cable damages). This includes Mtrs. 1565.00 402.50 629912.50 1565.00 230.00 359950.00

providing and fixing of M.S clamp at every 1 Mtr.(As per Directive of EIC)

Supply and installation of any clamps made from 50x6 mm GI flat for

14 fiiting100 mm dia medium class GI pipe/any other pipes above ground with Pair 1252 115.00 143980.00 1252 34.50 43194.00

Supply, Installation, Testing, Commissioning of Half Round pipe(1000mm

Length, 6 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on trech to

16 provide indication cable route below land surface in underground trench to Mtrs. 88965.79 17.25 1534659.88 88965.79 5.75 511553.29

protect cable for mechnical injuries.

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of HT/LT

17 cables shall be provided at every termination of all cables stating detail as Nos 786 27.60 21693.60 786 9.20 7231.20

under. HT Cable :Feeder name/Phase(R/Y/B) LT Cable : TC/FSP

name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of feeder/PSS/FSP/RMU name

of HT/LT cables shall be provided at every 150 MTR

HT Feeder: Substation/Feeder LT

Feeder : PSS/Transformer/FSP

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

EARTHING PIT : Supplying &

erecting earth pit of minimum bore dia. 150 mm size approved make safe

Earthing Electrode consisting Pipe in pipe Technology as per IS 3043-1987

made of corrosion free G.I. Pipes having Outer pipe dia of 50 mm having

80-200 Micron galvanising connections, terminal dia of 12 mm with

constant ohmic value surrounded by highly conductive compound with high

charge dissipation with civil works of earthing chamber. For Electrical

installation covering Transformer neutrals,HT & LT switchgears for

independent earthing in normal soil, Length of Pipe 3 mtrs.Backfilling

compound 2 bags of 25 Kg each.

Supply installation & commissioning of earthing conductor 38 x 3 G.I. strip

20 for pole mounted transformer and RMU Etc as well as connection to be Mtrs. 3297.00 158.70 523233.90 3297.00 59.80 197160.60

made to the earth pit. Rates inclusive of hot dipped hardwares.

Obtaining statutory approval from Electrical Inspector for installation

23 DISMENTALLING:

Dismentalling of pole mounted transformer,stacking the same after

transporting to discom store without any damage as and where condition.

b Above 500 KVA Nos. 1 4025.00 4025.00

Dismentallling RCC/Rail pole with cross arm,insulators,hardwares,stay,

24 etc.and return it to discom store.While dismentalling utmost care shall be Nos. 868 155.25 134757.00

taken so that the material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of conductor & line

25 material & after making coil and stacking the same at discom store.Routte Km. 34.62 2300.00 79626.00

Dismentalling of any type of service connection from the site and material

return to DISCOM store as per directive of EIC

CABLE ROUTE MARKER: Providing and erecting RCC cable route marker

27 as per drawing No. discom/R&D/RM-001 duly marked with "DANGER" Nos 890 345.00 307050 890 115.00 102350.00

mark, "discom POWER CABLE" and arrow of route of cable.

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing the

same to UGVCL in AutoCad copy as ell as pdf copy and hard copy in six

sets. The drawing should be geographical indicating all directions

FENCING: FRP Fencing for RMU and PSS, post shall be made out of FRP

Pultruded hollow section of size 50x50x5mm.. and shall be grouted in the

ground with c. c. of ratio 1:3:6., Sub frame provided using hollow FRP

a section 50x25x5mm or FRP angles 50x50x5 at top and bottom and other RMT 5109.00 4012.58 20500271.22 5109.00 794.82 4060748.15

accessories for fixing of gates etc. Rails shall be made out of FRP notch

bars of 12mm dia, Pickets shall be made of flats of size 35x5mm SMC or

FRP as per specifications and Drawing NO: discom/R&D/Fencing/FRP/001

Fixing of DTC meter at all Transformers Center in such manner that meter

reading may be taken easily without obstruction due to fencing of RMU

(excluding Meter/Meter Box/Cable)

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Paint Pointed Letter 2 inch size(Marking on RMU, Transformer, In any

palce.(As per directive of Engineer Incharge) with supply of color

HT-UG Total in Rs. 531621874.18 85315966.47

HT-UG Total in Cr. 53.16 8.53

SCHEDULE-B2: CONVERSION OF OVERHEAD TO UNDERGROUND LT ELECTRICAL NETWORK

Providing & erecting XLPE(IS:7098) (I)-88 ISI marked multistrand

Aluminium conductor armoured cable ,sand for 1.1 kV to be laid on pole or

in existing cable trence/pipe at road crossing of following size of cables.

2 Work carried out up to consumer premises with meter shifting, and provide

load side cable as per site conditions and as per EIC. For consumer

premises DWC pipe should be provieded(With Excavation, back filling and

sand as per technical specification)

LT CABLE TERMINATION: Cable

termination on FSP,LT Distribution Transformer Box,MSP/SFU /Busbar etc

of pole mounted transformer of LT cable grade as specified below including

cutting,stripping of cable,insulations,providing compression type

terminals,suitable cable glands,crimping lugs with necessary

connections.Work carried out up to consumer premises with meter shifting,

and provide load side cable as per site conditions and as per EIC. For

consumer premises DWC pipe should be provieded.

4 Lying of all types of cable in trench(without Excavation) Mtrs. 112434.00 172.50 19394865.00

5 Lying of cable on pole Mtrs. 1760.40 43.70 76929.48

6 Lying of the cable in the Pipe(Without Excavation) Mtrs. 1124.34 57.50 64649.55

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

7 Drilling work in Road Crossing through push through Mtrs. 8802.00 569.25 5010538.50

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation with back

filling as per the specification of cable lying)

9 Supply, intstallation of the DWC pipe(Without Excavation)

Lt cable saddling works: Direct cable saddleing with wall and etc for this

work GI type saddle and nail shall be used.

Supply, Installation, Testing, Commissioning of Half Round pipe(1000mm

Length, 4 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on trech to

12 provide indication cable route below land surface in underground trench to Mtrs. 140832.00 17.25 2429352.00 140832.00 5.75 809784.00

protect cable for mechnical injuries.

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of HT/LT

13 cables shall be provided at every termination of all cables stating detail as Nos 13544 27.60 373814.40 13544 9.20 124604.80

under. HT Cable :Feeder name/Phase(R/Y/B) LT Cable : TC/FSP

name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of feeder/PSS/FSP/RMU

14 name of HT/LT cables shall be provided at every 30 MTR Nos. 37478 27.60 1034392.80 37478 9.20 344797.60

HT Feeder: Substation/Feeder LT

Feeder : PSS/Transformer/FSP

EARTHING PIT : Supplying &

erecting earth pit of minimum bore dia. 150 mm size approved make safe

Earthing Electrode consisting Pipe in pipe Technology as per IS 3043-1987

made of corrosion free G.I. Pipes having Outer pipe dia of 50 mm having

80-200 Micron galvanising connections, terminal dia of 12 mm with

constant ohmic value surrounded by highly conductive compound with high

charge dissipation with civil works of earthing chamber. For Electrical

installation covering Transformer neutrals,HT & LT switchgears for

independent earthing in normal soil, Length of Pipe 3 mtrs.Backfilling

compound 2 bags of 25 Kg each.

Supply installation & commissioning of earthing conductor 38 x 3 G.I. strip

for pole mounted transformer and upto FSP,RMU,MSP,SFU, Busbar Etc as

well as connection to be made to the earth pit. Rates inclusive of hot dipped

Obtaining statutory approval from Electrical Inspector for installation

18 DISMENTALLING:

Dismentallling RCC/Rail pole with cross arm,insulators,hardwares,stay,

a etc.and return it to discom store.While dismentalling utmost care shall be Nos. 3274 155 508288.5

taken so that the material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of conductor & line

b material & after making coil and stacking the same at discom store.Routte Km. 132.27 2300 304221

Dismentalling of any type of service connection from the site and material

return to DISCOM store as per directive of EIC

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

FSP (FUSE SECTION PILLER): 4 Way

FSP (FUSE SECTION PILLER): 4 Way

Supplying and erecting 120x100x40 cms. Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) (As per

Specification and drawings) with cable clamps to be burried in ground to

have appropriate erection on look unifrom unit erected with cement

concrete foundation and 45 cms high brick masonry internal supported on

both side with intrnal and outer side locking arrangement with lock and keys

in duplicate Incoming switchgear SFU of TPN and outgoing HRC SMC fuse

base and knife type links 32 Amp to 630 Amp capacity fuse base fitted on

630 Amp current capacity copper Busbar with RYB colour coding and

insulated strip with all internal connections and entry for incomming up to

core 300 sq mm 4 nos and outgoing 3 nos. 3 1/2 core cables of suitable

sizes. (As per Technical specification of FSP ) (Erection shall be carried out

as per approved drawing and site condition) (FSP Amp Capcity is as under)

FSP (FUSE SECTION PILLER): 6 Way

FSP (FUSE SECTION PILLER): 6 Way

Supplying and erecting 120x100x40 cms. Fuse section pillar fabricated from

4 mm Thermosetting Plastic ( moulded in a single piece ) i.e Glass

Reinforced Polyester sheet Moulding Compound (SMC ) (As per

Specification and drawings) with cable clamps to be burried in ground to

have appropriate erection on look unifrom unit erected with cement

concrete foundation and 45 cms high brick masonry internal supported on

both side with intrnal and outer side locking arrangement with lock and keys

in duplicate Incoming switchgear SFU of TPN and outgoing HRC SMC fuse

base and knife type links 32 Amp to 630 Amp capacity fuse base fitted on

630 Amp current capacity copper Busbar with RYB colour coding and

insulated strip with all internal connections and entry for incomming up to

core 300 sq mm 4 nos and outgoing 5 nos. 3 1/2 core cables of suitable

sizes. (As per Technical specification of FSP ) (Erection shall be carried out

as per approved drawing and site condition) (FSP Amp Capcity is as under)

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 4 Way Supplying and

erecting 120x100x40 cms. Mini section pillar fabricated from 4 mm

thick Thermosetting Plastic(moulded in a single piece) i.e. Glass

Reinforced Polyester Sheet Moulding Compound (SMC) Type

Enclouser(As per Specification) with cable clamps to be burried in

ground to have appropriate erection on look uniform unit erected with

cement concrete foundation and 45 cms high brick masonary internal

supported on both side with internal and outer side locking

arrangement with lock and keys in duplicate. Incoming HRC SMC

fuse base and kinfe type links 32 Amp to 250 Amp. capacity, fuse

base fitted on 250 Amp. current capacity copper Busbar with RYB

colour coding and insulated strip with all internal connections and

entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos. and outgoing

nos. 3.5 core cables of suitable sizes.( As per Technical specification

MSP(Mini Section Piller) : 6 Way Supplying and

erecting 120x100x40 cms. Mini section pillar fabricated from 4 mm

thick Thermosetting Plastic(moulded in a single piece) i.e. Glass

Reinforced Polyester Sheet Moulding Compound (SMC) Type

Enclouser(As per Specification) with cable clamps to be burried in

ground to have appropriate erection on look uniform unit erected with

cement concrete foundation and 45 cms high brick masonary internal

supported on both side with internal and outer side locking

arrangement with lock and keys in duplicate. Incoming HRC SMC

fuse base and kinfe type links 32 Amp to 250 Amp. capacity, fuse

base fitted on 250 Amp. current capacity copper Busbar with RYB

colour coding and insulated strip with all internal connections and

entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos. and outgoing

nos. 3.5 core cables of suitable sizes.( As per Technical specification

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 8 Way Supplying and

erecting 120x100x40 cms. Mini section pillar fabricated from 4 mm

thick Thermosetting Plastic(moulded in a single piece) i.e. Glass

Reinforced Polyester Sheet Moulding Compound (SMC) Type

Enclouser(As per Specification) with cable clamps to be burried in

ground to have appropriate erection on look uniform unit erected with

cement concrete foundation and 45 cms high brick masonary internal

supported on both side with internal and outer side locking

arrangement with lock and keys in duplicate. Incoming HRC SMC

fuse base and kinfe type links 32 Amp to 250 Amp. capacity, fuse

base fitted on 250 Amp. current capacity copper Busbar with RYB

colour coding and insulated strip with all internal connections and

entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos. and outgoing

nos. 3.5 core cables of suitable sizes.( As per Technical specification

Supply, Instalation, Testing, Commissioning switch fuse unit made by

metal box and capacity of 125 A, Mostaly used in flat/Socity area.

a Installation worked caried out with instruction of EIC. And as per the Nos. 716 12086.50 8653934.00 716 1150.00 823400.00

drawing approved by CA- Minimum 16 Nos. of CKT

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by metal box and capacity of 200 A, Mostaly used in flat area.

22 Installation worked caried out with instruction of EIC. And as per the Nos. 205 18400.00 3772000.00 205 1150.00 235750.00

drawing approved by CA - Minimum 16 Nos. Of Circuit

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by metal box and capacity of 400 A, Mostaly used in flat area.

23 Installation worked caried out with instruction of EIC. And as per the Nos. 102 20700.00 2111400.00 102 1322.50 134895.00

drawing approved by CA- Minimum 16 Nos. Of Circuit

CABLE ROUTE MARKER: Providing and erecting RCC cable route marker

25 as per drawing No. discom/R&D/RM-001 duly marked with "DANGER" Nos 1142 345.00 394128.00 1142.4 115.00 131376.00

mark, "discom POWER CABLE" and arrow of route of cable.

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing the

same to UGVCL in AutoCad copy as ell as pdf copy and hard copy in six

sets. The drawing should be geographical indicating all directions

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Total Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Unit Rate in Rs Erection Qty. Unit Rate in Rs Grand Total

FENCING: FRP Fencing for FSP/MSP/SFU/BUSBAR, post shall be

made out of FRP Pultruded hollow section of size 50x50x5mm.. and

shall be grouted in the ground with c. c. of ratio 1:3:6., Sub frame

provided using hollow FRP section 50x25x5mm or FRP angles

50x50x5 at top and bottom and other accessories for fixing of gates

etc. Rails shall be made out of FRP notch bars of 12mm dia, Pickets

shall be made of flats of size 35x5mm SMC or FRP as per

Paint Pointed Letter 2 inch size(Marking on FSP, MSP, SFU Etc In any

palce.(As per directive of Engineer Incharge) with supply of color

30 HRC Fuse and its Fuse base(Spare)

31 Jointing Kit for LT Cale

33 LT cable Tiles- for protection of the LT cables RMT 97.75 0 0 11.5 0

LT-UG Total in Rs. 426724879.03 93654417.51

LT-UG Total in Cr. 42.67 9.37

Total HT-UG & LT-UG (Supply+Erection) without GST 958346753 178970384

Total HT-UG & LT-UG (Supply+Erection) with GST 1130849169 211185053