Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC KUCHHADI VADI VISTAR PORBANDAR GUJARAT 360579 | PORBANDAR | GUJARAT | 360579 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹38.5 L+₹2.6 L (7.24%)Rejected-AOC 33 NATIONAL CHAMBERS NEAR CITY GOLD CINEMA ASHRAM ROAD AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹40.2 L+₹4.3 L (12.0%)Rejected-AOC HQ CE SC PUNE | PUNE | MAHARASHTRA | 410301 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹41.1 L+₹5.2 L (14.5%)Rejected-AOC PLOT NO 626 627 GIDC BEHIND GANGOTRI DIARY PORBANDAR 360 577 | PORBANDAR | GUJARAT | 360577 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹42.2 L+₹6.4 L (17.7%)Rejected-AOC 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L5 | Rejected-AOC REJECTED |
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
23 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I CG PORBANDAR
Military Engineer Services, GE I CG Porbandar, DHQ No. 1, Opp. Birla Cement Factory, Porbandar-360575
PROVN OF REPAIRS TO EXISTING EXTERNAL SECURITY WALL AT INAZ VILLAGE, ICGS VERAVAL UNDER GE I CG PORBANDAR
2022_MES_561065_1
8782
Open Tender
Civil Works
Item Rate
180 days
VERAVAL
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE I CG PORBANDAR
₹75,000
Yes
15 Dec 2022
2 Nov 2022
24 Nov 2022
2 Nov 2022
23 Nov 2022
16 Nov 2022
Amount
SCHEDULE 'A'
Demolition/ dismantling of precast concrete block masonry, built in cement mortar in walls etc complete all as specified.
Dismantling structural steel work including doors, gates, fencing post and struts etc but excluding framed truss, barbed wire, concertina coil, etc, complete all as specified.
Demolition of reinforced cement concrete as in boundary wall columns etc., (reinforcement cut to required to facilitate demolition) complete all as directed by Engineer in Charge.
Taking down cement plaster on brick/ concrete surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil, complete all as specified and directed.
Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard/ dense soil, all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of stone work or concrete surfaces in cement mortar 1:4, finished even and smooth w/o using extra cement, complete all as specified and directed.
M & L for precast concrete block masonry with solid block n.exc 20 cm width type C1, 1:3:6 setting in cement mortar (1:6).complete all as specified and directed.
All as per item No. 11.00 here-in-before, but except PCC block, complete all as specified and directed.
Use and waste of formwork to sides and soffits of beams, bands and the like for rough finished surface of concreteall as specified and directed.
Use and waste of formwork to the sides of rectangular columns for rough finished surfaces of concrete all as specified and directed.
M&L Reinforced cement concrete, 1: 1.5: 3, type A1 nominal mix (using 20mm garded stone agg) as in columns and alike all as specified and directed.
M&L Reinforced cement concrete, 1: 1.5: 3, type A1, (using 20mm garded stone agg) as in beams and alike complete all as specified and directed.
Mild steel CRS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item no. 17 but 5 to 10 mm dia as in stirrups.
M & L for PCC 1:3:6, type C1 (using 20mm graded stone agg) as in coping, bed blocks and similar work including necessary form work complete all as specified and directed.
M & L for Broken stone hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed..
Material & Labour for 75mm thick plain cement concrete B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement complete all as spd & directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.
Returning filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in hard/dense soil complete all as specified and directed.
Removal of excavated material to a distance exc 250 mtr but n.exc. 500 mtr and depositing as directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
S&F framed work in angle iron of any section for grill, grating, iron doors, posts and struts in fencing or MS flat iron including drilling holes, notching for wire including an embedding in concrete, securing bolts and cutting tops to shape and similar work confrming to grade Fe-410(Gde E-250) complete all as specified and directed.
S&F for Mild Steel Gate ornamental and intricate design framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; hold fast for steel gate and similar work including for portion framed and hung as gates with heavy hold fast, including pintle hinges, stops, hand-made sliding bolts etc. conforming to Fe 410-0 or Fe 310-0complete all as specified and directed.
Material and labour of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
Material and labour of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat synthetic enamel paint, complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, including applying one coat of wall care putty, complete all as specified and directed.
All as per item No. 28.0 here-in-before, but on old surfaces of wall and applying one coat of wall care putty and complete removal of existing surface treatment with sand paper or iron patti / flat/ machanical means, complete all as specified.
S&F Galvanised 2 strand, hot dip galvanised steel wire 2.24mm dia coated with CLR anti corrosive paint fixed on Y' shaped angle iron with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).
S&F Galvanised steel punched type concertina coil 610mm dia (in stretched position) with number of circles 80 Nos of 200 clips with weight 7.5 to 8 Kg/Coil and recommended average coverage is 6.00 RM per coil, hot dip galvanized steel wire coated with CLR anti-corrosive paint, making diamond shape with the help of dove tail clips (18 SWG) fixed over barbed wire with angle iron. The concertina coil is to be fixed with barbed wire at points wherever coil touches the bottom of barbed wire with the help of hog rings (14 SWG), complete.
M&L for Granules textured homogeneous wall finishing consisting of of a two component system of Dry Granules (25 Kgs per pack) made of 92% silica Particles coated with fade resisteant pigments, 100% acrylic polymer bonding agent (5 Kgs per pack) with the applied thickness of the coating between 0.8mm -1.2mm on a cured , smooth level plaster without keying, as per the shades/combinations approved, to be applied by and approved applicator of the manufacturer, as per the directions/supervision of the Engineer-in-Charge.The above textured coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating meet JISA 6909 on smooth plastered surface.
shree chamunda enterprise
K B N TRADERS
K K Construction Co
RAJ ENTERPRISE
roxy enterprise
Harsh Infrastructure
M/S. P.M GODHANIYA
SURAJ ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .