Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹35.2 L+₹60,194.73 (1.74%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹37.3 L+₹2.6 L (7.61%)Rejected-AOC PLOT NO 127 3 A RATNASAGAR FLATS SECTOR 19 GANDHINAGAR 382019 | GANDHINAGAR | GANDHINAGAR | GUJARAT | 382019 | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 4 | L4₹37.3 L+₹2.7 L (7.75%)Rejected-AOC | L4 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 5 | L5₹39.0 L+₹4.4 L (12.6%)Rejected-AOC | L5 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
SPL REPAIR TO BLDG NOS P 149 P 157 AND CERTAIN MINOR WORKS AT MIL STN GANDHINAGAR
2022_MES_550778_1
GE(A)/GNR/TOKEN/57 of 2022-23
Open Tender
Civil Works
Item Rate
90 days
MIL STN GANDHINAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹70,000
Yes
9 Nov 2022
8 Sept 2022
3 Oct 2022
8 Sept 2022
1 Oct 2022
19 Sept 2022
8 Sept 2022 - 17 Sept 2022
Amount
Excavation in trenches n exc 1.5m wide and n,exc 1.5 m in depth for foundation,etc or shafts, wells, cessipts,manholes,pier holes,etc n exc 10 sq m inplan and getting out in soft/loose soil complete all as specified and directed.
Excacation of post holes (or simllar holes) each n,exc 0.5cum,and getting out insoft/loose soil retuting and filling in and ramming earth of brokrn rubble mixes with earch around in layers completed all as specified and as directed.
Removing excavated material not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
M&L for Cement Concrete type B-2, 1:2:4 using 40 mm graded crushed stone graded agg as in fdn filling and mass concrete complete all as specified and directed.
M&L PCC (1:4:8) C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete as in foundation filling and mass concrete all as completed as directed.
M&L Pre cast reinforced cement concrete (1:2:4) type B-1 (uing 20mm graded stone aggregate) in precast posts, fencing posts,straining or terminal posts, struts etc for fencing average sectional area exc 100 and n exc 250 sq cm, with or wittout chamferd angles and flat, splayed, rounded or mitred tops as directed and fixed.etc completd all as specified and directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4
M& L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
M&L 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F, 35 mm thick 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part -I), Klin seasoned and chemically treated and complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.
S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each
S&F, factory made, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
S&F, Mild steel barrel tower bolts, stove enameled black with bright bolt of 200 mm complete all as specified and directed
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F 250 mm long mild steel sliding door bolts, enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.
S&F, single action spring hinges (ISI MarK), mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.
S&F Mild steel pressed handles,oval type stove enamelled black of size 125mm complete all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.
S&F,in repair stainless steel heavy duty, tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of 140mm complete all as specified and directed.
S&F Stainless steel wire cloth. 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples
S&F in repair Stainless steel wire cloth. 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples
S&F framed work such as grills, grating etc with ends of bars shoulderd or rivetted or forcged into spikes ,framed guard bars ,barred iron doors congirming to FE 290 Gde E-165 complete all as specified.
M&L MS steel gate, of angle or other section with gusset plates, rails comforming to Fe-41--W (Gde-E-250) including for hanging or sliding with and including either hooks and hinges with locking arrangements, (2.30m wide and 2.00 High) etc completed all as specified and as directed.
M&L Mild steel tmt bars10mm dia and over, cut to length, bend to shape required, including crancking, bending for hooplig for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc completed all as specified and as directed.
M&L 5 mm and over upto and including 10mm dia in stirripus, spacers and binders cut to length,bend to shape required including crancking, bending spirally for hooping for columns, hoocking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc completed all as specified and as directed.
M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade of Fe 410-W Gde E-250 quality
M&L Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in framing for cladding, glazing and the like including door frames/ chowkats, etc complete all specified and directed.
M&L for Steel work in tubular section any size as in gate complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
S&F expanded metal, nexc 4.0 sm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members
S&F, galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. (Note: Each line wire shall be measured for payment)
M&L for machine cut kota stone slab, 450x600mm ( 18"X24"), 20-25mm thick as in flooring laid over and including cement mortar screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete
M&L for 100 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors and finishing the top surface even and smooth without using extra cement complete all as specified and directed.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and as directed by Engineer - in - Charge
M&L for non skid coloured tiles any colour 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed of CM 1:6 complete all as specifide and directed.
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.
M&L for glazed ceramic coloured tiles any coloured / shed of size 450mm x 300mm x 6-7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4), complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick (compacted thickness) sand cushion below paver blocks including takingout old paver block floor complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering cement plaster 12mm thick in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coats of white wash complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.
M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old plastered surfaces and applying one coats of white wash on ceiling complete all as specified and directed.
M&L for two coats of oil bound distemper over one coat of 1mm thick wall care putty ( Make : Birla/JK White) base on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for complete removal of existing treatment (any no of layer) of wall and applying two coats of oil bound distemper over one coat of 1mm thick wall care putty (Make : Birla/JK White) base on old treated surface including preparation of surfaces complete all as specified and directed.
S & F 3 mm thick fugured glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane
S&F 4 mm thick, black tinted glass panes fixed to aluminium windows/vents with necessary rubber gaskets complete all as specified and directed.
S&F, 5mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.
M&L for preparation of old painted wooden surface of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel surface over 10cm or girth and applying two coats of synthetic enamalled paint over a coat of red oxide zinc chrome primer etc complete al as specified and as directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.
S&F in repair two way bib taps with health faucet with 1.0 mtr brass flexibile tube and wall hook mounted type chromiun plate for EWC.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 40mm bore of pipe complete all as specified and directed.
S&F steel water tubes, 25mm bore, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F steel water tubes, 40mm bore, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed for 25mm bore of pipe.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed for 40mm bore of pipe.
Supply and laying of 20 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors including connection to old GI pipe if required complete all as specified and directed.
S&F, Repairs Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed.
S&F of 20 mm outer dia CPVC elbow (3/4 X1/2) with brass thread at one end for fixing of taps etc and other end plain complete all as specified
S&F in repair PTMT towel Ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats.
S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including MS Z clamp complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including MS Z clamp complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S&F, 110 mm bore PVC (SWR) junction single , (Single T) equal or unequal with access door complete all as specified and directed.
S&F, 75 mm bore PVC (SWR )junction single , (Single T) equal or unequal with access door complete all as specified and directed.
S& F 110 mm PVC (SWR) vent cowl
S& F 75 mm PVC (SWR) vent cowl
S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.
S&F in repairs vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device including PVC seat cover complete all as specified and directed.
S&F in repair 75 mm outer dia PVC (SWR) floor trap, plain with Grating including joining with solvent complete all as specified and directed.
S&F in repair vitreous China counter wash basin, oval type, flat back, 560 x 470X220 mm size, snow white, inserted in granite slab chromium plated waste pipe of suitable length including taking down existing wash basin complete.
Supply only PVC waste pipe 32mm bore of size 450mm to 600mm long complete all as specified and directed.
M&L, Pre Stressed, pre cast, reinforced cement concrete (M-25 frade) column cross section of size 150mm X 2400mm with contineous vertical groove of sizes 60mmx35mm at two sides of column to receive the precast panels, including reinforced with 7 Nos wires of 3mm dia high tensile corbonized steel, surfaces finished even and smooth including errecting in position complete all as specified and as directed.
M&L, Pre Stressed, pre cast, reinforced cement concrete (M-25 grade) panels of cross section of panel (300x45mm) reinforced with 4 Nos wires of 3mm dia high tensile corbonized steel, including fixing in position in between column grooves and jointing and flush pointing of all horizontal and verticle joints of panels with cement mortar 1:3 complete all as specified and as directed.
Soap dish in repair stainless steel, approximate size 160x 160x90mm complete all as specified and directed.
S&F, in repair, only PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F, 40mm bore, high density polyethelene pipe (HDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.
S&F, in repair, long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.
Supply only fancy type long head pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.
S & F in repairs chromium plated Stop Valves (Angle type) fancy type 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.
S & F in repairs chromium plated with long shank and cup (concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed. (Make Jaquar only)
Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each complete all as specified and directed
S&F, Powder coated Aluminium windows/ ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
Taking down aluminium door shutter from frame exceeding 1.0 Sqm but not exceeding 2.0 Sqm and re-fixing in same opening after repair of parts such as ie clip, easing, rubber beads, greasing/oiling and including replacement of components ie middle rail, top rail and handle complete with locking arrangement, tower bolt and push handle for smooth functioning complete all as specified and directed. NOTE: The unit quoted rate inclusive with replacement of any spare parts for required for smooth functioning and not any claim entertained on this account excluding door floor spring / door closer
S&F in repair Aluminium (Diecast) body hydraulically door closer regulated,designation No.3, universal type,sutable for door shutters etc.
S&F, in repair, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) but including cleaning the sunken portion of WC by demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E2 using 40mm graded stone aggregate, finished even and smooth complete all as sepcified and directed.
S&F in repair, vitreous china half stall urinal (345X320X560 mm) flat back, of white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.
S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
Supply only chromium plated heavy duty urinal spreader all as specifiede and dircted
M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.
S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.
S&F in repair bathroom corner self super clean (transparent) unbreakable heavy duty set of 3 pieces (7",9" & 11") (As per sample)
M&L for heavy duty, parking vitrified tiles of size 400 x400x 10mm thick, as in floor, set,jointed and pointed in neat cement slurry with white cement and pigment over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.
S&F, in repair, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.
S&F, 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)
Supply, hoisting, fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked,including dismantling of old PVC/AC tanks of 500 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.
Supply, hoisting, fixing in position and connecting, in repairs,1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked,including dismantling of old PVC/AC tanks of 500 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.
Dismantling structural steel work including door, gates but excluding framed truss etc complete all as specified and directed
Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.
M&L for taking down carefully copper/aluminium point, wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed.
M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the following :-
(a) One light/fan /Exhaust point controlled by one switch
(b) One multi purpose socket 5 Amps, Independent board
(c) One multi purpose socket 5 Amps, on the same board
M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC concealed conduit of 20mm bore fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box complete all as specified and directed.
S&F, in repairs, LED light fitting, 1 x 20 watt 220V, AC, decorative box type with driver , holder , including LED tube light complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.
S&F, lamp holder insulated body with back plate for battern fittings complete all as specified and directed.
S&F, in repair, switch piano, flush button single pole, one way 5 Amps complete all as specified and directed.
S&F, in repair, switch piano flush button single pole, one way 15 Amps complete all as specified and directed.
S&F, in repair Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.
S&F, Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed.
M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.
S&F, in repair, socket outlet multipurpose, 3 pin, 5 & 15 Amps flush type complete all as specified and directed.
S&F, in repair, socket outlet 2 in1, 3 pin, 5 Amps, flush type complete all as specified and directed.
S&F, in repair, MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting complete all as specified and directed.
S&F, in repair, MCB’s SPN 40 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.
Taking down existing exhaust fan and keeping in safe custody and re-installation the same after completion of work complete all as specified and directed.
ALBA AC AND REF SERVICES
divyarsh entrprise
Shree Builders
Ramdev and Sons
GIRNAR CONSTRUCTION
Badri Electricals
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .