Uttarakhand

Active

Works

Civil Works

Design built of Solid Waste Management Facility including supply installation commissioning and Operation Maintenance for 5 years of all necessary equipment for processing of solid waste

CEO (Uttarakhand Tourism Development Board) - ADB

Tehri Garhwal, Uttarakhand

Amount: Refer DocsCloses: 31 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published1 Oct 2026
Pre-Bid Meeting14 Oct 2026
Submission Opens24 Oct 2026
Closes31 Oct 2026
Bid Opening31 Oct 2026

Tender Value

Refer Docs

EMD Value

₹74 L

Closing Date

31 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

Project Director SICRTD

Address

Pt.Deendayal Upadhaya Paryatan Bhawan Near ONGC Helipad Near ONGC Helipad Rd Garhi Cantt Dehradun Uttarakhand 248003

Work Description

Design built of Solid Waste Management Facility including supply installation commissioning and Operation Maintenance for 5 years of all necessary equipment for processing of solid waste

Tender Information

Tender ID

2026_UTADB_100852_1

Reference Number

SICRTD/OCB-N/CW-12 Dated 01.10.2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Lump-sum

Location

Tehri

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As Per Bid Document

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredDesign, built, of Solid Waste Management Facility including supply, installation, commissioning and (.pdf)

Finance

RequiredFinancial Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹11,800

Tender Fee Payable To

Project Director SICRTD

EMD Fee Amount

₹74 L

Pre-Bid Meeting

Meeting Place

Dehradun

Important Dates

Last Activity

1 Oct 2026

Published

1 Oct 2026

Bid Opening

31 Oct 2026

Download Starts

1 Oct 2026

Download Ends

31 Oct 2026

Submission Starts

24 Oct 2026

Clarification Period

8 Oct 2026 - 13 Oct 2026

Pre-Bid Meeting

14 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (373 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Schedule-1
2	Topographical Survey, Geotechnical investigation, Design, Drawing & Documentation work for Integrated Municipal Solid Waste Management facility and other ancillary works: Work Shall Include Design, Engineering, Preparation of Good for Construction drawing for civil, structural, mechanical electrical & instrumentation and vetting of major RCC structures from reputed Govt. institute (IIT/NIT or approved by Employer's Representative).Work shall include topographical survey, Plot Survey,Geotechnical Investigation, Trial pits etc. as per Technical specification and as directed by Employer's Representative .	1	Lot	-	-
3Schedule-2
4CIVIL WORKS
5Land Development
6	Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)	32,603	Cum.	-	-
7	Excavation in Ordinary Rockusing Hydraulic ExcavatorCK-90 and Tippers with disposal upto 1000 metres. (Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site within all lifts and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)	32,603	Cum.	-	-
8	Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per design, drawing, technical specification and as per the direction of Engineer-in-charge	6,168	Cum.	-	-
9Fencing
10Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.15 MB

Work Item Documents

Technical.pdf

Tender Documents • 32.77 MB

BOQ_118863.xls

BOQ • 10.78 MB

Additionaldocuments.pdf

Additional Documents • 0.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Schedule-1
2	Topographical Survey, Geotechnical investigation, Design, Drawing & Documentation work for Integrated Municipal Solid Waste Management facility and other ancillary works: Work Shall Include Design, Engineering, Preparation of Good for Construction drawing for civil, structural, mechanical electrical & instrumentation and vetting of major RCC structures from reputed Govt. institute (IIT/NIT or approved by Employer's Representative).Work shall include topographical survey, Plot Survey,Geotechnical Investigation, Trial pits etc. as per Technical specification and as directed by Employer's Representative .	1	Lot	-	-
3Schedule-2
4CIVIL WORKS
5Land Development
6	Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)	32,603	Cum.	-	-
7	Excavation in Ordinary Rockusing Hydraulic ExcavatorCK-90 and Tippers with disposal upto 1000 metres. (Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site within all lifts and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)	32,603	Cum.	-	-
8	Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per design, drawing, technical specification and as per the direction of Engineer-in-charge	6,168	Cum.	-	-
9Fencing
10Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Schedule-1

Topographical Survey, Geotechnical investigation, Design, Drawing & Documentation work for Integrated Municipal Solid Waste Management facility and other ancillary works: Work Shall Include Design, Engineering, Preparation of Good for Construction drawing for civil, structural, mechanical electrical & instrumentation and vetting of major RCC structures from reputed Govt. institute (IIT/NIT or approved by Employer's Representative).Work shall include topographical survey, Plot Survey,Geotechnical Investigation, Trial pits etc. as per Technical specification and as directed by Employer's Representative .

Lot

3Schedule-2

4CIVIL WORKS

5Land Development

Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)

32,603

Cum.

Excavation in Ordinary Rockusing Hydraulic ExcavatorCK-90 and Tippers with disposal upto 1000 metres. (Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site within all lifts and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.)

32,603

Cum.

Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per design, drawing, technical specification and as per the direction of Engineer-in-charge

6,168

Cum.

9Fencing

10Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.