Construction of Library Building At. Nani Tambadi Ta. Nanapondha Dist. Valsad under DGVCL CSR Initiative 2025-26

NAME OF WORK : Construction of Library Building At. Nani Tambadi Ta. Nanapondha Dist. Valsad under

DGVCL CSR Initiative 2025-26.

DAKSHIN GUJARAT VIJ COMPANY LIMITED, SURAT.

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

( A ) EARTHWORK

1 Excavation for foundation up to 1.5 m depth including sorting 92.00 Cumt 117.08

out and stacking of useful materials and disposing of the the

excavated stuff up to 50 meter lead. (A) Loose or Soft Soil

2 Excavation for foundation for depth from 1.5 m to 3.0 m depth 88.00 Cumt 129.81

including sorting out and stacking or useful materials and

disposing of the excavated stuff upto 50 M lead. (A) Loose or

3 Filling available excavated earth (excluding rock) in trenches, 84.00 Cumt 130.39

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each deposited layer by ramming and

4 Filling in plinth with sand under floors including watering 14.00 Cumt 460.19

reamming, consolidating and dressing etc. comp.

5 Filling in foundation and plinth with murrum or selected soil in 105.00 Cumt 289.06

layers of 20 cm. thickness including watering ramming and

consolidating etc. completed.

6 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse 25.00 Cumt 3,005.76

sand : 6 hand broken stone aggregate 40 mm nominal size) and

curing complete excluding cost of form work in : (A) Foundation

7 Providing and laying cement concrete 1 : 2 : 4 ( 1 cement : 2 15.00 Cumt 3,683.34

coarse sand : 4 graded stone aggregates 20 m.m. nominal size)

and curing complete excluding cost of form work &

reinforcement for reinforced cement concrete in :

(A) Foundation and Plinth.

8 Providing TMT FE - 500/500D bar reinforcement for R.C.C. work 16,300.00 Kg 76.21

including bending binding and placing in position complete up to

floor two level.

9 Providing laying controlled cement concrete M-250 work with 27.00 Cumt 4,286.44

curing complete including the cost of form work and excluding

the rate of reinforcement for reinforced concrete work in.

Upto floor two level

Ground Floor (A

) Foundations footings Base of columns and mass concrete.

10 ( B ) Slabs, landing, shelvas, Balconies etc 12.00 Cumt 6,537.73

11 ( C ) Ground Beams and Plinth Beams 8.00 Cumt 5,831.74

12 ( C-1 ) Beams, Girders and cantilever 7.00 Cumt 6,157.97

13 (D ) Columns, pillars posts and struts square, rectangular, 5.00 Cumt 7,298.26

polygonal in plan upto plinth level

14 (D-1 ) Columns, pillars posts and struts square, rectangular, 5.00 Cumt 7,298.26

polygonal in plan

15 ( F ) Lintels 1.00 Cumt 7,079.09

16 ( G ) Chhajja 1.00 Cumt 6,667.01

17 ( H ) Stair cases 6.00 Cumt 5,549.95

18 ( I ) Coping 3.00 Cumt 5,937.79

19 Providing laying controlled cement concrete M-250 work with 12.00 Cumt 6,577.83

curing complete including the cost of form work and excluding

the rate of reinforcement for reinforced concrete work in.

Floor Two Level to Floor Three Level.

( B ) Slabs, landing, shelvas, Balconies etc….

20 ( C ) Beams, Girders and cantilever …. 7.00 Cumt 6,198.07

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

21 (D ) Columns, pillars posts and struts square, rectangular, 5.00 Cumt 7,338.36

polygonal in plan …..

22 ( E ) Lintels ….. 2.00 Cumt 7,119.19

23 ( F ) Chhajja …… 1.00 Cumt 6,707.11

24 ( G ) Stair cases ….. 4.00 Cumt 5,590.05

26 Providing laying controlled cement concrete M-250 work with 4.00 Cumt 6,617.92

curing complete including the cost of form work and excluding

the rate of reinforcement for reinforced concrete work in.

For Floor Three to Floor Fourth Level.

( B ) Slabs, landing, shelvas, Balconies etc.....

27 ( C ) Beams, Girders and cantilever ….. 2.00 Cumt 6,238.16

28 (D ) Columns, pillars posts and struts square, rectangular, 3.00 Cumt 7,378.45

polygonal in plan …..

29 ( E ) Lintels …. 1.00 Cumt 7,159.28

31 Brick work using commom burnt clay building bricks having 19.00 Cumt 4,348.45

crushing strength not less than 35 kg./sq.cm. in foundation and

plinth in cement mortar 1: 6 (1 cement : 6 fine sand)

(C) Fly Ash Bricksl…….

32 Brick work using commom burnt clay building bricks having 29.00 Cumt 4,623.43

crushing strength not less than 35 kg./sq.cm. in foundation and

plinth in cement mortar 1: 6 (1 cement : 6 fine sand)

(C) Fly Ash Bricksl…….+Extra for brick work in superstructure

above plinth level upto floor two level (C) Fly Ash Bricksl

33 Brick work using commom burnt clay building bricks having 25.00 Cumt 4,666.89

crushing strength not less than 35 kg./sq.cm. in foundation and

plinth in cement mortar 1: 6 (1 cement : 6 fine sand)

(C) Fly Ash Bricksl…….+Extra for brick work in superstructure

above plinth level above floor two level (C) Fly Ash Bricksl

34 Brick work using commom burnt clay building bricks having 17.00 Cumt 4,710.35

crushing strength not less than 35 kg./sq.cm. in foundation and

plinth in cement mortar 1: 6 (1 cement : 6 fine sand)

(C) Fly Ash Bricksl…….+Extra for brick work in superstructure

above plinth level above floor two level (C) Fly Ash Bricksl

35 Half brick masonary using commom burnt clay building bricks 14.00 Sqmt 691.95

having crushing strength not less than 35 kg./sq.cm.. in cement

morar 1:4 (1 Cement: 4 coarse sand) above plinth upto floor

(C) Fly Ash Bricksl

36 Half brick masonary using commom burnt clay building bricks 119.00 Sqmt 698.33

having crushing strength not less than 35 kg./sq.cm.. in cement

morar 1:4 (1 Cement: 4 coarse sand

Floor two level to floor Three level.

(C) Fly Ash Bricksl

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

37 Providing and fixing 35 mm thick Decorative type flush door 9.00 Sqmt 5,338.30

shutters, solid core construction with Indian Teak Wood frame

of size 100mm X 70mm & frame of first class hard-wood with

cross band and face veneer or ply-wood face panels, 1.5 mm

thick laminate on both sides including Stainless steel fixtures and

fastening and SS handle including primer coat of approved

quality and two coats of oil painting etc complete.

38 Providing and fixing FRP frame size 125x65 mm and 35mm thick 12.00 Sqmt 2,019.98

FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with fastener sleeve & alluminium fixtures

39 Providing and fixing extruded aluminum window, Door, etc 31.00 Sqmt 2,140.33

having extruded aluminum Colour Powder Coated section frame

main outer size 127mm x 38.10mm x 1.35mm (of Jindal Section

no:2443,@ Wt.1.384 Kg/mt),horizontal Two / Three track

member size 122.20mm x 31.75mm x 1.10mm (of Jindal Section

no:8787,@ Wt. 1.205 Kg/mt),vertical member of size 122.20mm

x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt.

Kg/mt) with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm

(of Jindal Section no:8947 @ wt.of 0.456Kg/mt/Section 8948,@

Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

40 Providing and fixing Alluminium Louvers of fixed in standared 2.00 Sqmt 1,175.56

extruded of alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour

anodized alluminium frame for ventilation etc complete for

41 Providing and fixing M.S. grills of required pattern to wooden 825.00 Kg 104.04

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts

and nuts or by screws. (A) PLAIN GRILL

42 Providing and fixing Stainless steel pipe railing using round S.S. 26.00 Rmt 2,415.92

pipe of various diameter of approved quality with S.S. No.

consisting 8 % nickel having pipe of 16 gauge including

Horizontal and vertical pipe as per detailed drawing. Vertical

43 Providing and fixing M.S. fan clamps tube 1 of 16 m.m. dia M.S. 16.00 Nos. 129.49

bar bent to shape with hooked ends to R.C.C. slabs during laying

including painting the exposed portion of the loops all as per

standard design complete.

44 Providing and fixing wooden file storage with openable shutter 18.00 SMT. 8,080.00

with 450 mm deep shelves partition and sides with all outer and

inner plywood surface covered by 1mm th. SF laminate finish

using 18mm th. vertical horizontal and shutter, 12mm th. back,

shelves commericial plywood approved make, 01 mm th. SF

finish laminate, teakwood liping, SS conciled handle, sliding lock

& necessary hardware materials etc. inside and liping french

polish finish complete in all respects by engineer in charge.

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

45 Wooden Partition ( Full and Half Height )The scope includes 19.00 Smt 3,482.12

supply and erection /installation of the item on site. The

partition frame work comprises of 25 X 50 mm MDF Section with

vertical and horizontal sections with necessary gaps for cable

management at egular intervals, The penal are of 8 mm MDF

stuck on both side of grid work with outer side with .8 mm high

pressure laminate, The partition are fixed with tong and grove

arrangement , The framework can be with panels made of fabric,

inboard panel, laminated panels or glass panels, The fabric

panels are made of 8mm. plain partical board/ MDF laded with

desired fabric / laminate, The inboard panels are made of

12mm. soft board with, clubbed with desired fabric, The

Laminate panels are made of 8mm. plain partical board/MDF

pressed with high pressure laminate of 1 mm, Wherever

necessary the cutouts are provided for mounting the

switches,for details and assembly work refer drawings, laminate

to be approved by client / consultants. The rate includes cost of

all labour, material and with necessary tools, tackles, adhesive,

screws etc. An external beading / visible teak wood / veneer

surfaces shall have matt melamine polish and internal surfaces

shall be finished with French polish.for satisfactory completion

of this item. The rate also includes for all necessary items

required to complete the job as per design /drawing and client /

consultant's instructions.

46 Providing and fixing hard drawn steel wire fabric 75mm x 25mm 31.00 Smt 762.20

mesh or weight not less than 7.75 kg. per Sq.M. to window

frames etc. including 60 x 20mm beading of teak wood.

47 Providing and fixing wooden openable shutter with inner 17.00 Smt 2,727.00

plywood surface covered by 1mm th. SF laminate finish using

18mm thick plywood shutter including teakwood liping, SS

conciled handle, sliding lock & necessary hardware materials etc.

inside and liping french polish finish complete in all respects by

engineer in charge

48 Reading Chai with Cushion as per approved and technical 80.00 Each 2,070.50

specification given by EIC

49 Executive Revolving Chair High Back as per approved and 10.00 Each 6,565.00

technical specification given by EIC.

50 M S Office Cupboard Glass Door With 4 Adjustable Shelves Size: 12.00 Each 14,645.00

51 Single MS book rank as per approved and technical specification 15.00 Each 13,003.75

52 Wooden Office Table Made Top 25 MM PLB And All Body 18 5.00 Each 13,635.00

MM One Side Three Drawer And Other Side Locker with Self

53 Reading Table Square Sape Made Body 18 MM PLB Top 25 MM 5.00 Each 19,695.00

PLB Size : 48” x 48” x 30”

54 Reading Table C Shape Made Body 18 MM PLB TOP 25 MM PLB 2.00 Each 54,540.00

Three Side Hight 4 Fit , Table Top Size: 24” x 24” All Over Size :

Fit+ 16 Fit +4 Fit

55 Wooden Book Cash Open Made All Body 18 MM PLB And 10.00 Each 6,565.00

Shelves 25 MM PLB With 1 MM Aje Beading Size: 66” H x33” W x

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

56 Wooden Book Cash Double Face Made All Body 18 MM PLB And 10.00 Each 11,817.00

Shelves 25 MM PLB With 1 MM Aje Beading All Over Size: 66” H

x 33” W x 24” D Single Face Size:66” H x 33” W x12” L

57 Three seater Sofa as per approved and technical specification 5.00 nos 39,390.00

58 Providing 15 mm. thick cement plaster in single coat on fair side 347.00 Sqmt 153.20

of Brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in :

[ii] Cement mortar 1:4 [1 cement: 4 sand)

Ground Floor…..

59 Extra for Finishing with a floating coat of neat cement slurry 435.00 Sqmt 48.21

Upto Floor Two level.

Ground Floor…..

60 Providing & applying 10 mm thick cement plaster in single coat 88.00 Sqmt 140.95

on fair side of Ceiling surface/ Sloping Roof etc. for Ground

Floor upto floor two levels finished even and smooth in C.M. 1:4

(1 cement : 4 Sand ) including necessary curing, scaffolding, .....

61 Providing 15 mm. thick cement plaster in single coat on fair side 257.00 Sqmt 176.59

of Brick / concrete walls for interior plastering from floor two

level to floor three level and finished even and smooth in:

[ii] Cement mortar 1:4 [1 cement:4 sand)

Floor two level to .....

62 Finishing with a floating coat of neat cement slurry. 368.00 Sqmt 52.95

Floor two level to floor three level

63 Providing & applying 10 mm thick cement plaster in single coat 111.00 Sqmt 165.76

on fair side of Ceiling surface / Sloping Roof etc. from Floor

Two Level to Floor Three Level finished even and smooth in

C.M. 1:4 (1 cement : 4 Sand ) including necessary curing,

scaffolding.....

64 Providing 15 mm. thick cement plaster in single coat on fair side 62.00 Sqmt 199.98

of Brick / concrete walls for interior plastering from floor three

level to floor four level and finished even and smooth in:[

ii] Cement mortar 1:4 [1 cement:4 sand)

From Floor Three Level....

65 Finishing with a floating coat of neat cement slurry. 75.00 Sqmt 57.70

From Floor Three Level to Floor Four level

Second Floor…..

66 Providing & applying 10 mm thick cement plaster in single coat 13.00 Sqmt 190.58

on fair side of Ceiling surface / Sloping Roof etc. from Floor

Three Level to Floor Four Level finished even and smooth in

C.M. 1:4 (1 cement : 4 Sand ) including necessary curing,

scaffolding.....

67 Providing & applying 20mm thick sand faced cement plaster 422.00 Sqmt 300.66

on walls upto 10m height from ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1 cement : 1 sand ) and 8mm

thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including

68 Plastering exterior walls of height more than 10m from ground 96.00 Sqmt 380.83

level for every additional height of 4m or part thereof. From

69 Providing and fixing 150 mm wide, approved quality chicken 75.00 Sqmt 105.04

wire mesh at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag

by cement mortar 1:3 before applying the plaster, including

70 Providing throating or plaster drip and moulding to RCC 114.00 Rmt 42.17

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

71 Providing cement vata ( 10 cm x 10 cm size ) quarter round in 116.00 Rmt 23.68

cement mortar 1:1 including neat cement finishing, watering etc.

72 Forming groove of uniform size from 12x12mm and upto 175.00 Rmt 73.73

25x15mm in the top layer of washed stone grit plastered surface

as per approved pattern, including providing and fixing

aluminum channels of appropriate size and thickness (not less

than 2 mm), nailed

73 Admixture cost of Xypex admix C 2000 NF as 1% of cementitious 14.00 KG 707.00

74 Wall painting (three coats) with plastic emulsion paint of 666.00 Sqmt 137.39

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth.

75 Wall painting ( Three Coats ) with plastic emulsion paint of 210.00 Sqmt 145.04

approved brand and manufacture on ceilings and sloping roofs

surfaces to give and even shade including thoroughly brushing

the surface free from mortar dropings and other foreign matter

76 Finishing wall with weather proof exterior emulsion paint on 518.00 Sqmt 131.06

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc including apprlying wall

primer complete

77 Applying two coats of Birla (white cement based) or Asian 876.00 Smt 40.59

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

78 Painting two coats (including extra priming coat) on new steel 75.00 Smt 122.49

and other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

79 Providing & Laying Grenite slab 18 mm thick in skirting, dedo, 156.00 Sqmt 3,293.61

risers of steps and landing, sill laid on bed of 10 mm thick base of

CM 1:4 finished with flush pointing in white or colour cement as

directed by EIC

80 Labour Charges for Edge Bevelling of Grenite 705.00 Rmt 85.85

81 Forming groove of uniform size from 12x12mm and upto 159.00 Rmt 73.73

25x15mm in the top layer of washed stone grit plastered surface

as per approved pattern, including providing and fixing

aluminum channels of appropriate size and thickness (not less

than 2 mm), nailed

82 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 271.00 Sqmt 970.07

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit (upto 10 ton)

83 Providing and laying marble stone slab flooring over 20mm 27.00 Sqmt 2,090.25

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand)

or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed

with gray cement slurry including rubbing and polishing

complete. (A) Marble slab 25mm thick

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

84 Providing and fixing sandwiched granite and kota as Kitchen 5.00 Sqmt 4,490.46

platform, pantry, Basin counter etc. 20mm thick granite of

approved color + 30mm Cm in 1:4 + 20mm kotah stone one side

polished in one piece for kitchen / platform. The joint shall be

filled with.....

85 Providing and laying in Flooring, Footpath, Pathway, Parking 24.00 Sqmt 449.86

area DECORATIVE TILES of approved make and size of 300 X

mm or any other size as per drawing over a bed of 25mm

(average) thick cement mortar 1:6 (1 cement : 6 sand) or lime

mortar (1:2) inc.....

86 Providing and laying broken chine mosaic flooring using brick 117.00 Sqmt 1,292.92

bats 25 to 100mm size with 50 % of C.M. 1:4 ( 1 cement :

coarse sand ) admixed with water proofing compound for

terrace using 12 mm to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar

creme out upto surface using white cement including rounding

off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

87 Providing composite water proofing treatment to floor and walls 12.00 Sqmt 759.52

of water tank, w.c.bath area, through approved agencies

preparing floor and wall for water proofing work/ by

chasing/cutting as per the companies requirement. First by

providing and applying cementitious crystalline based

waterproofing for concrete rafts, walls, water tanks, slabs,

concrete floors etc. with Krystol T2 or equivalent system.

Cementitious based dry Krystol T2 Crystalline powder capable of

creating Crystals to seal the pores, intercises and micro cracks in

88 Providing and laying cement concrete flooring 1:2:4 (1-cement : 12.00 Sqmt 322.93

2-coarse sand : 4-graded stone aggregate 20mm nominal size)

laid in one layer and finished with a floating coat of neat cement.

89 Providing, laying & jointing to level and slope rigid ISI make of 30.00 Rmt 389.68

approved make P.V.C. pipes of working pressure 6 Kg/sq.cm

for Horizontal drainage line below ground level including

necessary fittings such as bends, tees, rubber packing ring etc.

90 Providing, laying and jointing to level and slope 75 mm dia rigid 27.00 Rmt 277.43

ISI make of approved make PVC pipes of working pressure

Kg./sq.cm for "horizontal drainage" line in floors incl. necessary

fittings such as bends, tees, clamps, rubber packing ring etc. ....

91 Providing, laying and jointing to level and slope 110 mm dia rigid 20.00 Rmt 336.24

ISI make of approved make PVC pipes of working pressure

Kg./sq.cm for "horizontal drainage" line in floors incl. necessary

fittings such as bends, tees, clamps, rubber packing ring etc. ....

92 Providing, laying & jointing to level and slope 75 mm dia ISI PVC 20.00 Rmt 284.61

pipes of working pressure 6 KG per Sq.cm for "vertical

drainage" line including all necessary fittings such as bends, 'Y'

door bend, tees, one way joints, two way joints, rubber packing

93 Providing, laying & jointing to level and slope 110 mm dia ISI 20.00 Rmt 445.78

PVC pipes of working pressure 6 KG per Sq.cm for "vertical

drainage" line including all necessary fittings such as bends, 'Y'

door bend, tees, one way joints, two way joints, rubber packing

94 Providing, lowering, laying and jointing in true line and level 110 40.00 Rmt 502.91

mm dia 6 kg / sq.cm. working pressure rigid ISI Supreme /

Finolex PVC pipe for "Rainwater" pipeline fitted concealed in

walls including all necessary fittings such as bends, shoe bends

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

95 Constructing brick masonry chamber for underground C.I. 5.00 Nos. 2,932.93

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 RCC cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line. (upto 10 ton)

96 Extra over above items for every additional depth of 0.1m or 5.00 Nos. 242.39

part there of beyound 450 mm depth for brick masonry chamber

For 455mmx 610mm mm size

97 Providing and fixing Colored Wash down water closet Anglo 3.00 Nos. 2,415.03

Indian type WC pan with integral P or S trap including jointing

the trap with soil pipe in cement mortar 1:1 including seat cover

with CP brass hinges and rubber buffers…..

98 Providing, laying and jointing to level and slope 110 mm dia. 3.00 Nos. 183.82

rigid PVC pipes of working pressure 6 Kg/sq.cm. for

"W.C.connector" with lip ring including rubber packing ring fixing

the same air and water tight including joining with adhesive

solvent cement and testing the same etc. complete as directed

by Engineer In charge.

99 Providing and fixing P.V.C. low level flushing cistern with 3.00 Nos 1,554.32

manually controlled device (handle lever) conforming to IS :

7231, with all fittings and fixtures complete. …..

100 Providing and fixing 15mm dia. brass screw down stop tap of 6.00 No 205.83

approved quality including fixing in pipeline etc. complete as

directed by Engineer In charge. …..

101 Providing and fixing 15mm dia. brass polished bright screw down 6.00 No 158.86

bib taps in pipeline of approved quality etc. complete as

directed by Engineer In charge. …..

102 Providing and fixing 50mm dia. gun metal check or non return 6.00 No 1,872.54

full way wheel valve in pipeline of approved quality etc.

complete as directed by Engineer In charge. ….

103 Providing and fixing 40mm dia. gun metal check or non return 3.00 No 663.43

full way wheel valve in pipeline of approved quality etc.

complete as directed by Engineer In charge. …..

104 Providing and fixing 25mm dia. gun metal check or non return 3.00 No 420.63

full way wheel valve in pipeline of approved quality etc.

complete as directed by Engineer In charge. …..

105 Providing and fixing in position PVC cowel went to pipes.(B) 4.00 No 389.74

106 Providing and fixing in position PVC cowel went to pipes.(C) 4.00 No 501.87

107 Providing laying and jointing in true line and level 40mm dia. 40.00 Rmt 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

108 Providing laying and jointing in true line and level 25mm dia. 60.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

109 Providing laying and jointing in true line and level 15mm dia. 60.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

110 Providing & fixing 50mm dia & 30cm length G.I. rainwater spout 4.00 No 101.91

including making hole and fixing in proper slope and required

pattern fixed in cement mortar 1:1 (1 cement : 1 sand) etc.

complete as directed by Engineer In charge……

111 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 6.00 No 558.36

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

112 Providing and fixing stall type full sized urinal of approved 3.00 No 2,202.90

quality including the urinal with waste pipe, tap etc, complete

(A) White earthenware.

113 Providing & fixing white color flats vitreous China "Wash basin" 3.00 No 1,515.81

of size 600 mm X 400 mm x 150 mm with single hole for pillar

tap with C.I. or M.S. brackets (painted white ) including cutting

holes and making good the same, including 32 mm dia C.P.

114 Providing and fixing heavy duty swan neck pillar tap, capstan 3.00 No 692.19

head, screw down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

115 Providing & fixing 600 mm X 450 mm beveled edge mirror of 3.00 No 833.73

superior glass mounted on 6 mm thick AC sheet or plywood

sheet and fixed to wooden plugs with C.P.brass screws and

washers, including fixing C.P. brass bracket support and guard

rail fixed to woode.....

116 Providing and fixing 600 mm X 200 mm size C.P. brass towel rail 3.00 No 603.19

complete with C.P. brass brackets fixed to wooden plugs with

C.P. brass screws etc. complete as directed by Engineer In

117 Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink 1.00 No 2,280.27

( NIRALI BRAND ) as per IS 13983 with CI brackets and stainless

steel plug 40 mm including painting of fittings and brackets,

cutting and making good the walls wherever required Kitchen

118 Providing and fixing Toilet paper holder (A) C.P brass…. 3.00 No 418.68

119 Providing and fixing PTMT soap dish holder having length of 3.00 No 163.62

138mm, breadth 102mm, height of 75mm with concealed fitting

arrangements…...

120 Providing and fixing S.W. gully trap with C.I. grating brick 6.00 No 1,246.92

masonary chamber and water tight C.I. cover with frame of

mm x 300 mm size (Inside) with standard weight (I) Square

mouth traps (B) 150 mm x 100 mm size P of S type…..

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

121 Providing erecting and fixing double coated Syntex PVC. (ISI) 3,000.00 Litre 3.95

water tank of required capacity each with all necessary fittings

and connection etc. complete on terrace.

122 Providing and constructing BB masonry and cement concrete for 1.00 No 34,158.20

SEPTIC TANK OF 3m x 0.9m x 1.5m depth internal dimension

with excavation and depositing of the excavated stuff as and

where directed including providing laying brick masonry in CM

1:6 with using common burnt clay conventional building bricks

having crushing strength not less than 35kg/sqm for necessary

compartment for chambers and septic tank with necessary inlet

and outlet with cement plaster 15mm thick on wall, IPS flooring

bed concrete, RCC top slab, MH cover 600mm x 450mm of CI air

vent pipe with cowl vent and cement vatta of 10cm x 10cm in

CM 1:1 etc complete as directed by EIC.....

123 Providing and constructing SOAKWELL OF 2.5M internal dia and 1.00 No 47,919.45

5.00 m depth internal clear dimension including the cost of

excavation,foundation for honey comb mnasonry of 3m height

in CM 1:6 casting RCC 1:2:4 top slab 12 thick with CI Manhole

cover 60cm x 45cm size of 35 kg weight and 75mm dia CI pipe

1.8m long with 75mm dia cowl vent and filling the wall 1m in

depth with dry bricks bats including providing vata in CM 1:3

curing including cost of reinforcement etc complete as directed

124 Carrying out plinth treatment to post construction / existing 106.00 Sqmt 124.28

structure by spraying chemical solution for termite control

treatment including labour and material consistent with I.S.I.

specification…..

125 Steel work welded in built up sections framed work including 306.00 Kg 58.19

cutting hoisting fixing in position and applying a priming coat of

red lead paint and two coats of synthetic enemal paint up to

floor two level.

(A) In beams and joists,channels angles, pipes,

126 Providing & fixing in position collapsible steel shutters with 15.00 Smt 5,785.56

vertical channels 20 x 10 x 2 mm. Braced with flat iron diagonals

20 x 5 mm. Size with top and bottom rails of T-Iron 40 x 40 x

mm. With 38 mm. Dia steel pulleys, complete with bolts, nuts,

locking arangements, stoppers, handles including applying a

priming coat of Red lead paint

127 Double layer Roller Blinds 31.00 SMT 2,222.00

Providing and installing Zebra double layer roller blind Polyester

corded including all fixtures.

128 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) 1.00 Nos. 1,088.91

and getting out the soil and disposal of the surplus excavated

soil as directed within a lead of 50 Meter for following diameter

129 Add to or deduct from the rate for Bore Holes of 3.5 m depth, if 100.00 RMT 365.08

bore holes are made deeper or shallower than 3.5 m. for piles of

following diameter

130 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 100.00 RMT 336.24

working pressure poluthene pipes of the following outside Dia.

Low densidy, complete with special falnge compression type

fittings, wall clipsetc. including making good the wall ceiling and

floor.(G)110 mm

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

131 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 20.00 RMT 417.04

working pressure poluthene pipes of the following outside Dia.

Low densidy, complete with special falnge compression type

fittings, wall clipsetc. including making good the wall ceiling and

floor.(G)110 mm

Stainer Pipe with Slotted Holes

132 Providing, fixing & lowering ISI submerssible pump single phase 1.00 NO 31,390.80

of Luby brand including starter Switch branded name of 4" dia,

3.0 HP capacity, 25 stage motor, having head range from 148 ft

to 525 feet, flow rate of 780 to 6780 ltrs per hrs and delivery

upto 50 m head and lowering the same inside the borewell along

with pump etc.complete.

133 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 100.00 RMT 146.63

working pressure poluthene pipes of the following outside Dia.

Low densidy, complete with special falnge compression type

fittings, wall clipsetc. including making good the wall ceiling and

134 Providing laying and jointing in true line and level 32 mm dia. 20.00 RMT 119.15

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concelled as required and directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

135 Providing & fixing C.I bore cap for 160 mm dia bore pipe with 2 1.00 NO 303.00

nos M.S.Clamps for fixing 32 mm dia pipe, nut bolts & other

accessories required for complete job

136 Providing & jointing flat insulated copper wire single 150.00 RMT 60.60

phase/three phase of 2.5 Sq.mm as per instruction of E.I.C

137 Developing, cleaning & giving yield test for the borewell by 1.00 NO 2,424.00

required capacity of air compressor & pump running for 2 hour

or till no sand comes off with pumped water with necessary

pipes lowering & removing pipes in well etc. with all equipments

138 Supply & installing approved quality washed graded gravel of 100.00 RMT 172.71

size 5 mm to 10 mm incl. packing tha same in surrounding sapce

between casing pipe and bore hole. Before packing the gravels

shall be screened and all undersized & ove size particles shall be

139 Providing & Fixing Single Phase/Three phase electric starter 1.00 NO 2,020.00

switch of 10-20 Amp Capacity etc. complete.

140 Providing corrugated G.I. Sheets Class-3 roofing fixed with 60.00 Smt 727.13

Galvanied iron 'J' or 'L' hooks bolts and nuts 8 mm. diameter

with bitumen and G.I.Limpet washers filled with white lead

complete excluding the cost of purlins, raffers and trusses. (I)

0.80 mm. Thick sheet

141 Structural steel work ( Confirming to IS 4923-1997) riveted, 1,680.00 KG 127.95

bolted or welded in builtup for all type sections, in framed work,

including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer all complete as per the

structural designs and directions of Engineer in charge.Column

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

142 Providing and fixing pre-cast Rubber Dye inter locking concrete 138.00 Smt 686.90

block 60mm thick with grade of concrete M250 pnumatic

compressed by mechanically pressed and as per approved design

including 75mm Sand layer for levelling and filling the joint with

sand in proper line and level etc complete.

143 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse 14.00 Cumt 2,680.21

sand : 8 hand broken stone aggregate 40 mm nominal size) and

curing complete excluding cost of form work in :

(A) Foundation and Plinth.

144 Filling in foundation and plinth with murrum or selected soil in 350.00 Cumt 289.06

layers of 20 cm. thickness including watering ramming and

consolidating etc. completed.

145 Providing and fixing pre-cast concrete kerb stone of gray cement 50.00 RMT 361.64

based concrete block 30cm length,30cm height and 15cm thick

of M250 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

146 Supplying and planting Trees of variety as directed in pits by 10.00 NO 202.00

filling good earth and manure (mixed in equal portion and filled

upto entire depth of pit, inclusive of cost of plants and fertilizer

application). Tree plantation will be as mentioned in drawing or

as directed by the consultant /E.I.C and watering complete.

147 Supplying planting of shrubs of approved veriety in pits by filling 15.00 Nos 76.76

good earth and manure (mixed in equal portion and filled up to

entire depth of pit , inclusive of cost of plants and fertilizers

application,. Shrub plantation will be as mentioned & dire

148 Providing and filling rubbles including hand packing and filling 35.00 CMT. 1,064.80

interstices with quarry spalls in plinth/WBM road making layers

etc. complete with consolidating & levelling the top surface to

required gradiant and rolling with power roller as directed.

149 Supplying & spreading of crushed stone aggregates. Chippings 15.00 CMT. 459.13

etc. of hard stone of 40 to 63mm size free of disintegrated

pieces & organic matter for soling of WBM road including filling

the interstics forming the level surface to required gradings

150 Supplying & Spreading of crushed stone aggregates. Chippings 11.00 CMT. 747.55

etc.of hard stone of following nominal size free of disintegrated

pieces. Deleterious and organic matter (for bitumen surface

dressing etc.) and gradings as per(60 % 20 mm+40% 10 mm )

151 Rolling and consolidation water bound macadam (Except laterite 314.00 SMT 22.36

and kankar) including watering not exceeding 150 mm thickness

(main layer including binding mats. Including filling in

depressions which occurs during the process

(B) With power roller excceding 8 tonne and not exceeding

152 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse 15.00 CMT 3,005.76

sand : 6 hand broken stone aggregate 40 mm nominal size) and

curing complete excluding cost of form work in :

(A) Foundation and Plinth.

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

153 Providing and laying in position M-200 grade concrete for 23.00 CMT 4,418.75

reinforced cement conctere work including screed vibrator,

mm/12 mm polyester fibre as a secondary reinforcement, using

cement content as per including the cost of centering,

shuttering, finishing and cutting groove in RCC memeber

including cost of admixtures in recommended proportions as per

IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as per

direction of the Engineer - in - charge. ( A ) Road

154 Finishing concrete surface with machine Power Trowel and 150.00 SMT 75.75

making line for anti skid.

155 Expansion joint Cutting and filling with asphalt in concrete by 278.00 RMT 35.35

machine saw upto 80 mm height and upto 10 mm thick.

156 Providing TMT FE - 500D bar reinforcement for R.C.C. work 1,300.00 Kg 76.21

including bending binding and placing in position complete up to

floor two level.

157 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 20.00 Pt. 424.20

1.5 sq.mm (Green) both are of ISI marked (a) with medium class

Rigid PVC pipe and accessories - Cat III

158 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 15.00 Pt. 606.00

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to

be erected concealed in / flushed on wall/ceiling complete with

6A Modular type switch and hum free EME four or more step

type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on

PVC / Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (a) with medium class Rigid PVC

pipe and accessories Cat.III

159 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm 15.00 Pt. 449.45

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered

with appropriate front plate modules erected on / in wall /

ceiling as per pi pe erected with following type of accessories.[I]

For 6A Plug with 2-1.5 sq.mm Cu. Wire (a) with medium class

Rigid PVC pipe and accessories Cat. III

160 [III] For 16A Plug with 2-4 sq.mm Cu. Wire Cat III 10.00 Pt. 797.90

161 Point wiring for Looped Plug with 6A Modular type switch & 5 20.00 Pt. 242.40

pin socket erected on PVC / Metallic box, single mounting base

frame covered with textured / metallic front plate modules

erected on / in wall / ceiling with following type accessories

162 Point wiring for Two Way Controlled Light Point with 2-1.5 4.00 Pt. 535.30

sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked

1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ flushed on

wall/ ceiling, complete with 6A Modular type switches and

following type of accessories erected on PVC/ Metallic box,

single mounting base frame covered with textured/ metallic

front plate modules erected on/ in wall/ ceiling as per pipe

erected. With necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.(a) w ith medium class Rigid PVC

pipe and accessories Cat. III

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

163 Providing following type of Modular Type Accessories mounted 5.00 Each 161.60

with pvc / metallic box, single mounting base frame covered

with textured / metallic front plate , modules erected with

necessary connection. As desired by Engineer In charge

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat. III

164 Supplying & erecting Delton or approved make Telephone Cable 300.00 Mtr. 14.14

electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to

C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.[A] Conductor Size

165 (7) Blank Plate Single Cat. III 10.00 Each 20.20

166 (8) Modem Jack for Computer Open RJ-45 – 30.00 Each 161.60

167 Supplying & erecting approved make LAN cable of following size 350.00 Mtr. 70.70

in existing pipe as per direction[D] CAT - 6 e

168 Supply & connection of 1 meter patch chord for 30.00 No 126.25

interconnections

169 (9) 16 Amp. SP one way switch 10.00 Each 181.80

170 (10) 6/16Amp. Universal socket 15.00 Each 202.00

171 (22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit 4.00 Each 505.00

172 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 170.00 Mtr. 23.23

following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (a) 20 mm

174 Providing & erecting PVC Corrugated Flexible Conduit with 30.00 Mtr. 15.15

required nos. of coupling, PVC bushes, Check-nuts etc. complete

of following sizes.

176 Supplying & erecting UPVC Mini trunking (PVC Casing-n- 50.00 Mtr. 30.30

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm thick

duly sealed in joint & erected on wall / ceiling of following size .

177 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 100.00 Mtr. 60.60

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(c) 2 wire 1.5 sq. mm

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

178 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 150.00 Mtr. 80.80

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(c) 2 wire 2.5 sq. mm

179 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 100.00 Mtr. 111.10

Copper conductor wire in following type of pipe to be erected in

/ on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

180 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 100.00 Mtr. 146.45

Copper conductor wire in following type of pipe to be erected in

/ on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 6 sq. mm

181 Providing & Erecting following Shockproof tissino type 15.00 Each 20.20

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling.

(8) Bakelite lamp holder

182 Bakelite adopter for Holder to be erected. 15.00 Each 8.08

183 Decorative call bell Ting-tong box type 250 volts complete 2.00 Each 70.70

184 Providing & erecting Switch board for Computer or electric 15.00 Each 1,162.91

apparatus consisting of following items in single board erected

on PVC / Metal board with 3 mm thick PC (Polycarbonate) /

Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined.

4 nos. 6A Switch

4 nos. 6A 5 pin Plug

[B] For Modular Type Accessories

185 Providing & fixing street light fixture with 24 watts LED Light of 6.00 Each 2,565.40

Gelco, Havells and any other equivalent brand. & GI pipe Clamp

for fixing as per instruction of ELC.

186 P &F LED 4ft. 22 watt Tube light ISI marked of approved make 30.00 Each 565.60

chrompton/philips/Havelles with 2 year warranrty.

187 Providing and erecting approved make decorative recess / 5.00 Each 1,212.00

surface mounting type mirror optics luminaire complete with

non retrofit tubes, electronic ballast, high circuit P.F. & rust free

fitting components mounted in powder coated CRCA / Al.

housing with holder clear / opal diffuser complete erected with

(c) With Two Nos. 18 watt PLCFL –

188 15 Watt LED Battern for use as Morror Light 12.00 Each 2,525.00

Supply, Installation, testing & commissioning of Wash Basin Light

15 W LED Batten Surface Mounted, Complete with driver etc.

Model: 15Watt LED Batten

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

189 Providing and fixing of 50W cealing fan of Cromption / Anchor / 15.00 Each 3,686.50

Havells and any other equivalent brand 1200 mm size(Double

bell bearing , Pure Copper wire motor & Aluminium blade)

including copper fiexble cord of suitable & approved size from

cealing rose up to fan terminals & fixing of regulaters.

190 Providing & erecting Approved make Ceiling Fan with double ball 2.00 Each 1,666.50

bearing ISI mark with Condenser 230 volt A.C.50 Hz 900 mm

sweep complete having 3 blades alluminium body and blade sets

having ornamental design shanks , canopy & 30 cms. down rod

erected with 24/0.2, 3 core flexible wire with earthing.

191 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 15.00 Each 126.25

M.S. Pipe down rod erected duly painted for fan complete with

necessary 24/ O.20, 3 core flexible wire with earthing.

192 Supplying & erecting fan hook box of 10 mm M.S. round bar 15.00 Each 126.25

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

193 Providing 2.5 mm thick laminated sheet to cover the fan hook or 15.00 Each 20.20

194 Supplying and erecting approved make oscillating type bracket 3.00 Each 2,989.60

fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with

height adjustment and rotary tilting device complete with guard,

flexible Core plug top complete erected with lead wires as

directed.Cat.II

195 Supplying & erecting single phase approved make industrial 3.00 Each 2,424.00

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM[A] 305 mm dia 900 RPM

196 Providing and erecting Sheet Steel powder coated MCB 2.00 Each 2,949.20

Distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 13032 and

BS 5486-1986 without MCB to house appropriate nos. of MCBs.

(The DBs should be used of same company of MCB to be used)

(N) Three phase 8 way SS Double door for horizontal single

197 Supplying & erecting approved make RCCB + MCB (Electro 1.00 Each 2,292.70

magnetic type only) working on residual current device having

KA short circuit breaking capacity and 30 mAmp. Sensitivity &

30 mili sec. tripping time conforming to IS 12640 test knob

facility trip free mechanisum operating for rated leakage at

nominal ten volt, complete erected including all materials lugs

screws etc. completed. [e] 40A, 4 pole Three Phase Cat. III -

198 Supplying & erecting approved make RCCB + MCB (Electro 1.00 Each 2,292.70

magnetic type only) working on residual current device having

KA short circuit breaking capacity and 30 mAmp. Sensitivity &

30 mili sec. tripping time conforming to IS 12640 test knob

facility trip free mechanisum operating for rated leakage at

nominal ten volt, complete erected including all materials lugs

screws etc. completed.

[b] 32A / 40A, 2 pole Single Phase Cat. III - as Incomer

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

199 Miniature circuit breaker single pole 6A to 32A suitable to 5.00 Each 116.15

operate on 240 V A.C. system and having overload and short

circuit tripping elements and breaking capacity 10 KA to be

erected in existing M.S. box confirming to IS 8828/1996 with ISI

200 Supplying & erecting in earthpit of minimum bore dia. 225mm 1.00 Each 9,191.00

size ASH or approved make Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion

free G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications.

[A] For electrical installation upto 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

201 Providing one bag of 25 Kg. Additional Back Filling Compound 1.00 Each 1,111.00

(BFC) suitable for safe earthing device.

202 Water Cooler 2.00 Each 60,600.00

Supplying, Installing, Commissioning and Testing of water cooler

with inbuilt R.O. system.

Technical Specification:

• R.O. specification,Stainless steel body,Pre filter: 10’’x2.5’’.

micron pp filter,Pre filter: 10’’x2.5’’. 5 micron pp filter,,Carbon

filter: 10’’ ,activated carbon block filter,Booster pump: 125 PSI

pressure,Membrane RO:,Post carbon filter:Flow: 30 LPH,Auto

flushing: ,Solenoid valve,Auto on/off system: Floating

switch,Fitting: Smart SF ,fitting with TDS correction

system,Indicators: Power working, Low ,pressure, High pressure,

Auto flushing.,TDS reduction: 90 to 95 %,UV system: 11 Watt,

Philips lamp with quartz coating.,

• Cooler specification,Compressor: Make- Emerson / Kirloskar /

Tecuseh etc.,Storage tank: Stainless steel body,Chilled water

storage tank: 60 Ltr approx.

203 Providing and fixing of Fire Extinguisher 6 Kg. 2.00 Nos 1,414.00

204 Providing and fixing of 4.5kg. Co2 Type Fire Extinguisher 4.00 Nos 4,040.00

205 Clearing and grubbing road land including uprooting rank 500.00 SMT 8.24

vegetation grass bushes,shrubs,sapling and trees girth up to

mm removal of stumps of trees cut earlier and disposal of

unserviceable materials(A) By manual means in area of light

206 Excavation for foundation upto 1.5 m depth including sorting out 101.00 CMT 261.73

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard soil

207 Excavation for foundation for depth from 1.5 m to 3.0 m 90.00 CMT 282.85

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

208 Filling available excavated earth (excluding rock) in 190.00 CMT 130.39

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

209 Filling in plinth with sand under floors including watering 9.00 CMT 460.19

ramming, consolidating and dressing complete

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

210 Providing and laying cement concrete 1:3:6 (1- Cement : 3- 9.00 CMT 2,986.00

Coarse sand : 6- Graded brick bat aggregate 40mm normal size)

and curing complete excluding cost of formwork in (A)

Foundation and Plinth

211 Providing and laying controlled cement concrete M.200 and 26.00 CMT 4,004.01

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete

212 Providing and laying controlled cement concrete M.200 exposed 20.00 CMT 12,185.45

work with curing etc. complete including the cost of formwork

but excluding the cost of reinforcement for R.C.C. work in (B)

COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M

and upto 0.12 Sq.M

213 Providing and laying controlled cement concrete M.200 exposed 12.00 CMT 9,485.95

work with curing etc. complete including the cost of formwork

but excluding the cost of reinforcement for R.C.C. work in (A)

BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and

214 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 8.00 CMT 9,730.69

2- coarse sand : 4- graded stone aggregates 20 mm nominal size)

for R.C.C lintel including finishing smooth with,curing etc.

complete including the cost of formwork but excluding the cost

of reinforcement.

215 Providing TMT Bar FE 500D reinforcement for R.C.C. 8,400.00 KG 76.21

work including bending, binding and placing in position

complete upto floor two level

216 Brick work using common burnt clay building bricks 42.00 CMT 4,348.45

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand) (C) Fly Ash Bricks

217 Do as Above ….brick work in superstructure above plinth level 35.00 CMT 4,623.43

upto floor two level (C) Fly Ash Bricks

218 20mm thick sand faced cement plaster on walls upto height 10 1,050.00 SMT 300.66

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

219 Providing and applying Primer coat and Finishing wall with 1,050.00 SMT 131.06

weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete

220 Structural Steel work, welded in built up sections framed work 1,200.00 KG 127.95

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. (A)In beams and joists, channels

angles Tees, flats, with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like (upto 10 ton)

221 Providing and fixing RBT reinforced barbed wire weighting 9.38 360.00 RMT 7.07

Kg. per 100 Metre, strained and fixed to posts with G.I,staples

including fixing the postsin etc complete.

Descriprion Qty Unit Rate with 1% LC Amount in Rs.

222 Providing and fixing concertina coil fencing with punched tape 72.00 RMT 306.69

concertina coil 600 mm dia 10 metre openable length ( total

length 90 m), having 50 nos rounds per 6 metre length, upto 3 m

height of wall with existing angle iron ‘Y’ shaped placed 2.4m or

3.00 m apart and with 9 horizontal R.B.T. reinforced barbed

wire, stud tied with

G.I. staples and G.I. clips to retain horizontal, including necessary

bolts or G.I. barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile

strength of 165 kg/ sq.mm

with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of

M.S. angle, C.C. blocks shall be paid separately)

223 Misc. work/Unforseen work if required to be carried out during 1.00 JOB 353,500.00

execution of the work which are assential and required at stage

of working such as Electrical work,Furniture work, Landscaping

work, Plumbing work, Flase ceiling work, colour work and misc.

civil work as per instruction of Engineer in charge.

Total Amount in Rs.10751335.70

Total Amount in Rs.10751335.70

TOTAL Amount in Rs with GST12686576.13

TOTAL Amount in Rs with GST12686576.13

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in respect of this contract and also

any statutory variation in future towards above mentioned taxes & any other taxes if levied in future by statutory

authority applicable to the this contract shall be payable by the con-tractor and DGVCL will not entertain any claim

whatsoever in this respect.

The Contractor has to pay 1% Labour Welfare Cess of Bill amount to the concern Government Department.

The contractor shall also produce the receipt of payment of 1% welfare cess from the respective Govt.,

The proof of payment made by the contractor to the appropriate department shall be submitted to DGVCL, failing

which appropriate amount shall be withheld on getting information/instruction from the concerned department.

Addl. Chief Engineer (P)