Loading…
Loading…
Tender Value
₹28.6 L
EMD Value
₹57,200
Closing Date
29 Aug 2026, 10:30 am6d left
Executive Engineer
HPPWD Division Baijnath
Construction of building portion finishing work, W.S. and S.I
2026_PWD_141577_1
PWD/BD/NIT/2025-26-7901-49 dated 18.08.2026
Open Tender
Civil Works
Percentage
Baijnath
Mentioned in the SBD
9 documents required · 9 mandatory
₹2,000
₹57,200
21 Aug 2026
21 Aug 2026
29 Aug 2026
21 Aug 2026
29 Aug 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing 35 (Thirty five millimeter ) mm thick including black enemelled M.S. butt hinges flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters.as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." . | 28.42 | Per square metre | 2,470.6 | ₹70,214.45 |
| 2 | Provding and fixing 19mm (Nineteen milimetter ) thick commerical board water proof termite resistant shutter for cup board including fixing with nickel plated piano with screws etc the all cub board portion of shutter shall be finished with 6mm (six millimeter ) thick hard wood edging with neccessary screws as per PWD specification. as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." . | 59.64 | Per square metre | 977.63 | ₹58,305.85 |
| 3 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cove filets to be measured and paid seperately) 6mm (six millimeter ) thick "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." . | 59.64 | Per square metre | 663.4 | ₹39,565.18 |
| 4 | Providing and laying 19mm (Nineteen milimetter ) thick commercial board water proof termite resistant in shelves/box for cup board including fixing with nail and screw etc. complete as per PWD specification. The rate inclusive cost and carriage of material with in all leads, lift and other incidentals as per the direction and entire satisfaction of Engineer-In-Charge."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." | 227.84 | Per square metre | 1,448.8 | ₹3,30,094.59 |
| 5 | Providing and laying 20mm ( twenty milimetter ) thick acid proof alkali resistant 30cm x 30 cm (thirty into thirty centimetter ) babylon white gray colour NITCO OR equivalent tile in flooring laid in 12 mm ( twelve milimetter ) thick cement mortar (1:3) (one isto three) jointing with cement slurry mixes with pigment to match the shade of tile including rubbing, polishing complete with in all leads lift and other incidentals as per the direction and satisfaction of Engineer-In-Charge."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." | 232.1 | Per square metre | 1,926.8 | ₹4,47,210.28 |
| 6 | Providing and laying 20mm ( twenty milimetter ) thick acid proof alkali resistant 30cm x 30 cm (thirty into thirty centimetter ) babylon white gray colour NITCO OR equivalent tile in riser of steps, skirting, dado and pillers laid in 12mm ( twelve milimetter ) thick cement mortar (1:3) (one isto three) jointing with cement slurry mixes with pigment to match the shade of tile including rubbing, polishing complete with in all leads lift and other incidentals as per the direction and satisfaction of Engineer-In-Charge."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." | 88.83 | Per square metre | 1,884.2 | ₹1,67,373.49 |
| 7 | Providing and laying 19 mm (Nineteen milimetter ) thick commercial board shutters with hard wood edging and PGI sheet linning inside of shutter of approved size in SDB including bright finished iron butt hinges etc. complete as per detailed drawing for the work. The rate are inclusive cost and carriage of material with in all leads and lift and other incidentals as per the direction and entire satisfaction of Engineer-In-Charge."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." | 2.01 | Per square metre | 1,575.81 | ₹3,167.38 |
| 8 | Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. 300 x16 mm (Three hundred into Six millimeter ) "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." | 11 | Each | 345.4 | ₹3,799.4 |
| 9 | Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc complete in doors and cupboards 250x10mm (Two Fifty hundred into ten millimeter ) as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." . | 22 | Each | 179.1 | ₹3,940.2 |
| 10 | Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc complete in doors and cupboards 100 x10mm ( hundred into ten millimeter ) as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental. "The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time." . | 186 | Each | 125.65 | ₹23,370.9 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.93 MB
Tendernotice_2.pdf
PDF • 1.29 MB
SBD.pdf
Tender Documents • 4.22 MB
BOQ_210165.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].