Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹3.9 L−₹8,077.87 (2.01%)Rejected-AOC | L2 | Rejected-AOC Second Lowest |
Tender Value
₹4.2 L
EMD Value
₹10,580
Closing Date
21 Jun 2023, 1:00 pmClosed
AEE
O/o the AEE KLC subdivision No1 TVPM
KLC section 2 Running contract urgent maintenance and repairs of sanitary water supply and petty repairs in Hon Secretary quarters Hon Deputy Speakers quarters and Hon Speakers quarters for a period of six months from January 2023
2023_PWD_581670_1
DB2/PWD/BLDG/TR/1152/2023
Open Tender
Civil Works - Buildings
Item Rate
180 days
KLC
Please refer Tender documents.
9 documents required · 9 mandatory
₹935
Yes
₹10,580
Yes
KLC
5 Aug 2023
14 Jun 2023
23 Jun 2023
14 Jun 2023
21 Jun 2023
14 Jun 2023
14 Jun 2023
Amount
maintenance
9.101.1:Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall
50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall
50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
50.18.9.20.6:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee
OD227434/2022-2023:Cleaning blocked up silt of size 225x225mm by removing waste materials including disposing in pit etc complete
OD227435/2022-2023:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer of good quality with double speed adjustment with necessary accessories and screws etc. complete.
OD227436/2022-2023:Cleaning blocked up sewage line by removing waste and other materials using tamping rod<br>including disposing in pit etc complete
OD232345/2022-2023:Cleaning blocked up and notworking sewer manhole of size 60 x 60cm up to 1.20m by removing waste matter ,night soil etc as per the direction of Engineer in charge
OD227437/2022-2023:Supply and fixing 25mm full way wheel valve
18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
OD227438/2022-2023:Engaging Skilled beldar for attending petty repairs of sanitary and water supply installations etc<br>complete.
OD227439/2022-2023:Overhauling the not working flushing system of the closet after dismantling the inside fittings like<br>float valve , new washer, syphon etc in place of damaged one including cost , conveyance, labour etc complete
OD227440/2022-2023:Repairs to flushing cistern by replacing washer in place of damaged one including cost ,<br>conveyance , labour etc complete
17.28.2.1:Flexible pipe32 mm dia
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
14.28.1:Providing and fixing curtain rods of 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter
OD227441/2022-2023:Providing and fixing door lock of godrej or equivalent including cost of materials labour charges etc complete
9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
OD227442/2022-2023:Providing and fixing 25 mm float valve including cost of materials,labour charges etc complete
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
OD232093/2022-2023:Engaging labour for various works
OD232321/2022-2023:Encaging carpenter for petty repair works .
OD232327/2022-2023:Encaging Aluminum fabricator for petty repairs
14.70:Melamine polishing on wood work ( one or more coat)
22.6:Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
OD232347/2022-2023:Cutting and removing arayal growth over the parapet wall, roof slab etc. including all cost of rectifying materials, burying chemicals (acid, kerosin) etc. and removal of waste materials within a distance of 150m from site as per the direction of Engineer in charge.
OD232348/2022-2023:Cleaning the sump of size 4.60mx2.50mx1.50m situated on the rear side of Speaker quarters after bailing out water using with pump set including removal of all fungal growth and washing with fresh water, then bailing out the wastewater including disposal of waste materials, replacing 25mm dia foot valve and float valve with connected fittings etc. including all cost of materials and labour charges etc. complete
OD232349/2022-2023:Cleaning the sump of size 4.70mx2.65mx1.50m situated on the rear side of Deputy speaker quarters after bailing out water using with pump set including removal of all fungal growth and washing with fresh water, then bailing out the wastewater including disposal of waste materials, replacing 25mm dia foot valve and float valve with connected fittings etc. including all cost of materials and labour charges etc. complete
OD232350/2022-2023:Cleaning the sump of size 1.75mx2.70mx1.70m situated on the rear side of Secretary quarters after bailing out water using with pump set including removal of all fungal growth and washing with fresh water, then bailing out the wastewater including disposal of waste materials, replacing 25mm dia foot valve and float valve with connected fittings etc. including all cost of materials and labour charges etc. complete
OD232351/2022-2023:Cleaning the overhead PVC tank of capacity 2000 litre after bailing out water manually including clean removal of all fungal growth and washing with fresh water, then bailing out the wastewater including all cost of material etc. complete
OD232352/2022-2023:Cleaning the overhead PVC tank of capacity 1000 litre after bailing out water manually including clean removal of all fungal growth and washing with fresh water, then bailing out the wastewater including all cost of material etc. complete
OD232355/2022-2023:Providing and fixing steel mosquito net over the Doors, windows, ventilators etc. including the cost of materials, labour charge etc. complete
TVM TALUK ITI CERTIFICATE HOLDERS CO-OP SOCIETY Ltd
Bidder Name
TVM TALUK ITI CERTIFICATE HOLDERS CO-OP SOCIETY Ltd
A. NISAMUDEEN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_859015.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .