Estimate for Electrical work at Vanchikulam Park

Amount

Supply Conveyance, installation, testing and commissioning of 15/16W bollard light fitting (K-lite ID-5566/Abby -Helix/Bajaj/Philips) on the existing cc plinth and giving connection etc as required.

Construction of suitable RCC foundation in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement concrete of size bottem footing 850X850X200 above 450x450x1300 mm steel reinforcement vertical horizontal bar 12mm dia and ring 8mm dia and expossed surface plastering in CM 1:4, including excavation in soft soil including all materials and labour.

Supply,conveyance , installation testing and commissioning of the following make garden/path way pole 6 M height, rectangular shaped with size 100x100 mm with single arm, body made of MS rectangular tube anti-rust treated and filled with powder coated including 1X60 W LED light fitting on the existing CC foundation with base plate ,foundation bolt/nut with washer etc, pole section are welded using special V groove technique built-in control box with die cast aluminium service door and safety rope coated with epoxy zinc phosphate primer and control gear tray is prewired with MCB, terminal connectors for loop- in loop-out arrangement.and giving connection with PVC insulated and sheathed 3 cor copper flexible copper conductor conformingwith relevant ISS etc as required .(K-lite ID KP4783 with 1X60W uni wing polar LED Lamps/Bajaj/Philips).

Supply,conveyance , installation testing and commissioning of the following make in garden Brussel pole 5 M height, tubular shaped with bottem size 140 mm and top 90 mm body made of MS tube anti-rust treated and filled with powder coated including 4X45 W LED light fitting on the existing CC foundation with base plate ,foundation bolt/nut with washer etc. pole section are welded using special V groove technique built-in control box with die cast aluminium service door and safety rope coated with epoxy zinc phosphate primer and control gear tray is prewired with MCB, terminal connectors for loop- in loop-out arrangement and giving connection with PVC insulated and sheathed 3 cor copper flexible copper conductor conformingwith relevant ISS etc as required .( KP-1062 of K-LiTE/Bajaj/Philips).

Supply Conveyance, installation, testing and commissioning of 15W focus light light fitting (K-lite ID-4268/similar make of Bajaj/Philips ) on the existing cc plinth and giving connection etc as required

Supply Conveyance, installation, testing and commissioning of 6W up light /ground light with IP 68connector (K-lite/ Bajaj/Philips) and giving connection etc as required

Supply & laying of one number PVC insulated and PVC sheathed armoured Aluminium power cable of 1.1KV grade of the following sizes in the existing DWC HDPE pipe as required. 4 core 16 sq mm.

Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing DWC HDPE pipe as required. 3 core 4 sq mm

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes 50/38 mm or nearest size made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground including excavation of trench

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes 50/38 mm or nearest size made out of HDPE conforming to IS 14930 Part II for mechanical protection to UG power cables laying on wall using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required..

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.3 X 4 sq. mm (20mm)

Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Tube Light point(Medium point)

Angle holder point(Mediumt point)

Supply, conveyance installation testing and commissioning the light fittings of following box types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp for box type fixture. ( Model Bajaj, Philips)

Supply and fixing brass batten/ angle holder with 200 mm Plastic sill shade and giving connection including supply of 9/10W LED lamp. etc complete

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing and also filled blanking slots with blanking plate etc. as required. (But without MCB/RCCB/Isolator). 4 way (8 + 12), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A, 4 pole isolater

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.5 to 32 A Single pole MCB

5 to 32 A Double pole MCB

5 to 32 A Tripple pole and neutral MCB

Supplying and fixing of junction box weather proof type (make Sintex IP 67) of following size with silicone weather proofing sealant, for fixing 16A 4 way connector bar . Size 340x250x100 mm

Supplying and fixing of junction box weather proof type (make Sintex IP 67) of following size with silicone weather proofing sealant, and fixing single phase 6A Tripple Pole connector . Size 200x140x100 mm

Supplying and fixing connector bar in the existing junction box complete with connections, testing and commissioning etc. as required. 16A 4 way connector bar

Supplying and fixing connector bar in the existing junction box complete with connections, testing and commissioning etc. as required. Single phase 6A Tripple Pole connector

Supply and fitting 24 hours Anolog Timer switch with SS enclossur supply voltage 230 V 50 Hz for operating automatic on/off function with IP53 grade protection, operating temperature 10 º C - 50º C, contact>16 A for controlling -main contact-1 Nos and giving connections etc complete.

Supplying, installing, testing and commissioning 63 A, 415 V, Triple Pole with Neutral Link, switch disconnector fuse unit in 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with ISI marked HRC fuses, ( Make prefered ABB, L&T, Siemens) interconnections, earthing etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. Including cost of PVC conduit 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying, installing, testing and commissioning three phase 63A, 415 V heavy duty switch disconnector fuse unit with HRC fuses and rotary handle in 1.6mm thick sheet steel enclosure duly painted with powder coating and including interconnections, earthing etc. as required and directly fix on wall using proper bolts, nuts etc.and making good the surface of wall etc. complete

Supply and fitting 32 A, 415 V Kitkat rewireable (Porcelain Fuse carrier & Base) type fuse unit in the existing fuse box and giving connections.

Supplying and Fixing charges of Three phase meter chamber with inspection type front door,size 600x450x200mm, made of MS sheet16SWG and flats neatly painted,including provison for fixing Fuse units and three phase energy meter directly fixing on wall using proper bolts ,nuts etc.and making good the surface of wall etc. complete

Supply and drawing 3.0mm dia copper conductor in surface/ recessed etc for earthing. as required. 3.0mm dia copper conductor

Providing independent ordinary pipe earthing using 1.50 mtrs of 40 mm dia GI pipe ,earth wire copper and other specials such as common salt ,charcoal bolts and nuts etc. complete required at site.

Paulson M I