WELCOME MAINT AND CLEANING OF SEWAGE LINES AND SEPTIC TANKS COVERED DRAINS MANHOLES REPLACEMENT OF UNSERVICEABLE MANHOLE COVERS DRAIN COVERS AND RAISING OF MANHOLES AT NORA VISAKHAPATNAM

Amount

Taking down shutters of any description exceeding 2 Sqm each complete all as specified and as directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

S&F factory made second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Material and Labour for Cement concrete type B0, 1:2:4 (using 12.5mm graded aggregate) as in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required complete all as specified and as directed .

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

S & F Factory Made second class hard wood 30 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc [without sash bars] edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

Supply and Fix wire netting of stainless steel wire 1.40mm dia fixed with tinned tacks of stainless steel wire staples, size of mesh 12mm complete all as specified and as directed .

S&F 30 mm Flush shutters [ISI marked], solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Factory Made 30 mm thick, second class hard wood, plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0sq.m. each complete all as specified and as directed.

S&F 30mm thick second class Glazed and skeleton shutters as in window, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass with stiles and rails etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter n.exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for syles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed.

S & F in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed. Note for Item No. 13 & 14 : Make of PVC frame / shutter shall be Sintex or equivalent in Nandi / Rajshri Plasti Wood.

S&F 100 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and as directed.

All as per Serial item no. 15 above but 75mm.

S&F 100 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 200 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F aluminium plate type II gate and shutter, hook & eye 125mm size [ ISI marked ] complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

S&F 300mm long aluminium alloy, anodized, sliding door bolt [ ISI marked ] with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

M&L for Powder coated aluminium frame for doors, windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as specified. Make: HINDALCO / INDALCO/JINDAL

M&L Powder coated aluminium window / ventilator shutters, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 of 100mm long (2 no.), suitable handle (1no.), complete all as specified. Make: HINDALCO / INDALCO/JINDAL

S&F Anodised aluminium deco grill DG-102 of 5mm dia hexagonal channel, including joining cleat for fixing and necessary fixing arrangements as required, complete all as specified and as directed. Make : Jindal / Indal / Hindalco

S&F PVC netting (Mulitcolour/plain colour) of PVC wire 1.40mm dia fixed to wooden door shutter with wooden beading complete all as specified and as directed.

Taking down wooden sutters n.exc 1 Sqm each and Resecuring or easing & adjusting, refixing in same opening excluding hardware complete all as specified and as directed.

Taking down wooden shutters exc 1 Sqm n.exc 2 Sqm each and Resecuring or easing & adjusting, refixing in same opening excluding hardware complete all as specified and as directed.

Taking down wooden shutters exc 2 Sqm each and Resecuring or easing & adjusting, refixing in same opening excluding hardware complete all as specified and as directed.

S & F in repairs stainless steel wire mesh with average width of aperture n exc 1.40 mm and nominal dia of wire 0.36 mm (Grade A1S1, 316-L with MOLYBDENUM) and fixed with existing/new wooden beading including painting to beading or fixed with stainless steel staples etc. complete all as specified and as directed .

Supply and Fix in repairs 150 mm long Extruded Aluminium alloy handles [ ISI marked ], fabricated type, anodised complete all as specified and as directed .

All as per item ser no. 33 above but 100mm long

Supply and Fix in repairs 100 mm long medium weight, cold rolled mild steel Butt hinges [ ISI Marked ] complete all as specified and as directed .

All as per item ser no. 35 above but 75mm

Supply and Fix in repairs 200 mm long Aluminium, anodised, barrel tower bolts [ ISI Marked ] of extruded section complete all as specified and as directed .

All as per item ser no 37 above but 125mm

S & F in repairs, Gate and Shutter, Hooks and Eyes of 125 mm size, of Aluminium plate Type II complete all as specified and as directed.

S&F in repairs Mild steel Helical door spring 300mm long, ordinary rat tail rod patttern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 300mm long aluminium alloy, anodized, sliding door bolt [ ISI marked ] with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Taking down the existing 'locking system, contains any number of levers replacing the strucked / damaged levers, applying oil to all parts and making functional properly and fixed in position complete all as specified and directed.

S&F in repairs continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and as directed.

S & F in repairs Mortise Lock, Vertical type of size 100 mm, 6 Levers with 2 keys of Godrej Make, complete all as specified and as directed.

Supply and Fix in repairs godrej make night latch of 75mm size with 2 levers (vertical type) brass body complete all as specified and as directed .

Supply and Fix in repairs brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed .

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, made of aluminium extruded section body complete all as specified and as directed. Make : Everite / Priya

S&F in repairs Magic eyes for wooden door including all fitting complete all as specified and as directed.

S & F in repairs PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern with polished sheet mirror glass 5 mm thick complete all as specified and directed. Make: Supreme / National / Alphina / Prayag

Supply and Fix in repairs 20mm bore aluminium alloy anodized curtain rails with brackets complete all as specified and as directed Note : Rod and bracket as required at site and as directed by Engineer-in-Charge.

S & F 25 dia stainless steel fancy curtain rod having minimum 2mm thick and not exc 3mm thick alongwith one pair fancy bracket for each opening/door/window complete all as specified and as directed . Note : Rod and bracket as required at site and as directed by Engineer-in-Charge.

S & F in repairs Ball catches with 8 mm dia., steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Material and Labour for pre laminated particle board interior grade 18/19mm thick with one side decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work fixed in narrow widths as in pelmet boxes etc width not exceeding 15 cm fixed in repairs complete all as specified and as directed .

Material and Labour for 19 mm thick water proof plywood, MR grade fixed with nails to timber frame work in repairs complete all as specified and as directed .

Material and Labour for 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. Make : Sunmica / Greenlam

Supply and Fix in repairs Continous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps 30mm ( when open) complete all as specified and as directed.

Supply and fix Teak wood lipping / beading of size18mm x 6mm thick, fixed to 19mm ply wood or veneered particle board or block board.with nails complete all as specified and as directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified and as directed .

Supply and Fix Sheet glass 4 mm thick ordinary quality and glazing with wooden beading in square not exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

ditto as per item ser no 60 above but exc 0.5 sqm in each pane

S&F Sheet glass, 5mm thick, ordinary quality and glazing with wooden beading in square/rubber beading in case of aluminum window. Area of each pane exc 0.5 sqm. (Note : The work includes all types of beading for Wooden and aluminum windows) complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

ditto as per itmem ser no 62 but not exc. 0.5 sqm in each pane

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water,removal of rubbish to outside MD Land etc. complete all as specified and as directed .

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying three coat of white wash work upto 10th Storey complete all as specified and as directed.

M&L for rendering 15 mm thick on surfaces of brick work or concrete in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement of rubber beading, aluminium beads, cleats of as required size and refixing in same position complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or errecting stand including pedestal complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

Supply & Fix in repairs Vitreous China Squatting pan of pattern long pan, size 580 mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F CP Health Faucet complete all as specified and as directed. Make : Jaquar ALD-573 / Plumber / Parko

S&F in repairs 110 mm dia Stainless steel grating fixed with white cement complete all as specified and as directed.

S&F in repairs 75mm dia Stainless steel grating fixed with white cement complete all as specified and as directed.

.S&F in repairs Brass CP mixer with 3-in-1 system for mixing hot & cold water screwed down for iron pipe and fixed to wall complete all as specified and as directed. Make : Jaquar model FUS-29281 / Plumber / Parko

S & F in repairs PTMT PVC connecting pipe 15 mm bore with of length 450 mm fitted with brass unions complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

S&F in repairs for 15mm bore, 600 mm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and as directed. Make : Prayag / Watertec

S&F in repairs for 15mm bore, 750 mm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and as directed. Make : Prayag / Watertec

S&F in repairs for 15mm bore, 600 mm long CP connection to connect gyeser hot water supply fitted with brass unions/nuts to connect iron pipe both ends complete all as specified and as directed. Make : Prayag / Watertec

S&F in repairs Low density waste pipe 40 mm bore working pressure rating 4 Kg / Sqcm with polyethylene union and check nuts 750mm long suitable to steel sink waste complete all as specified and as directed.

S & F in repairs Plastic Water Closet Seat, White, Closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. Make: Johnson Peddar / Parryware / Cera

S & F in repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of complete all as specified and as directed. Make : SLIMLINE / CERA / Hindware

S&F in repairs PVC syphon kit suitable for 10 ltrs capacity 'Slimline' low level flushing cistern and make functional complete all as specified and directed.

S&F in repairs PVC flusing cistern handles & washers etc of make as existing complete all as specified and as directed.

S&F in repairs kitchen Sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size 405 mm x 355 mm x 178 mm complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSBSD-52 / M/S JAYNA / NIRALI

S&F in repairs kitchen sinks made of stainless steel 1 mm thick with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 405 mm x 355 mm x 178mm fixed complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSB-06 / M/S JAYNA / NIRALI

S & F in repairs Stainless Steel Plate Rack of size 600 mm X 750 mm X 250 mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed. Make : Blue Star model No. KPR-311 / M/S JAYNA, NIRALI

S&F in repairs brass spindle (Heavy) ,suitable for 15mm bore bib tap / stop cock / pillar tap etc complete all as specified and as directed. Make : Plaza

S&F in repairs brass spindle (Heavy) ,suitable for 15mm bore Concealed stop cock spindle (Heavy) ,for bib tap /stop cock / pillar tap omplete all as specified and as directed. Make : Plaza

Disconnecting existing tanks setting aside ( or lowering if required) for hoisting, reconnecting & refixing in position after cleaning and removing all scale dirt etc. from mouths of circulating pipes of loft tanks in kitchen etc.of capacity n.exc.250 ltrs complete all as specified and as directed.

Dismantling water tanks of capacity in litres n exc 250 complete all as specified and as directed.

S&F PVC water tanks 225 ltrs capacity including transporting, fixing and hoisting complete all as specified and as directed. (Work from GF to 10th storey) Make : Sintex / Polycon / Rotex

S & F in repairs 15 mm bore , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 210 grams, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 20 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S & F in repairs 15 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F in repairs 15mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

S&F in repairs 20mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

S&F in repairs 25mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

Taking up or down 15mm bore water tubing and connections complete all as specified and as directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

S & F 15mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

Taking up or down 20mm bore water tubing and connections complete all as specified and as directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F in repairs for Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions, complete all as specified and as directed. Make : Jaguar CON-083KN / Cera / Parryware

S&F for Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15 mm dia bore iron pipe, in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F in repairs 15mm bore pillar taps fancy type, Swan neck 2 way cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : CERA / Parko / Dripless/Parryware

S&F in repairs 15mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : CERA / Parko / Dripless/Parryware

S&F in repairs 15mm bore Angle cock complete all as specified and as directed. Make : Jaquar Cat. No. CON -053KN / Cera / Parryware

S&F in repairs 120 mm dia circular fancy type brass chromium plated shower rose with swivel joints fixed in repairs complete all as specified and as directed. Make : Jaguar / Cera / Parryware

S & F in repairs Vitreous China Ware counter/sunken Wash hand basin white/coloured, fixed on granite palteform with white or mixing with coloured pigment to match the colour of Wash Hand Basin of size 550 x 400 mm size Make : Jaquar/Cera/Parryware/Hindware

S&F in repairs two in one vitreous China wash down water closet pan including flushing cistern (Combined ) fixed to wall including all accessories to fixed the pan complete all as specified and as directed. Make : M/s. Parry ware / M/s Cera / M/s. Hindware ( All are 1st quality) S&F in repairs two in one, including flushing cistern (combined) vitreous China wash down water closet pan, fixed to wall (including all accessories to fixed the pan) complete. Make (Jaquar/Cera/Parryware/Hindware).

Dismantling of terrozo floor, removing rubbish off the premises complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured Glazed ceramic tiles concept pattern 450 x 350 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 10 mm thick in vertical surfaces to match with the floor tile complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

Dismantling of stone slabs & tiles of any description of thickness laid dry and pointed in any mortar, in floors, aprons etc. complete all as specified and as directed.

M&L 18 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match as in steps, jambs, pillars, window- cills, cooking platforms and like including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick with shade of granite complete all as specified and as directed.

Preparing old treated surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of ceilings complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Preparing old surfaces of walls by brooming down or by steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil and greasy Spots and applying one coat of white wash complete all as specified and as directed

Preparing old surfaces of Ceilings by brooming down or by steel wire brushing, scrapping down smoke, soot , moulds, moss and efflorescent salts and trading oil and greasy Spots and applying one coat of white wash complete all as specified and as directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality

Material and labour for preparation of the old painted steel surfaces by scraping with emery paper, cleaning, redusting and making the surface smooth and spray painting with one coat of syntehtic enamel paint of approved shade to the MS frame complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, etc., and getting out in Soft / Loose soil complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and as directed.

Removing excavated soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for plain cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 (Using 40 mm graded granite stone aggregate) as in surface channels and drains inside manholes complete including storm water drains complete all as specified and as directed.

Demolition and breaking up drain pipes of SWG pipes set in cement mortar for 150 mm dia of pipe complete all as specified and as directed.

M&L for 150mm dia salt glazed stone ware drain pipes laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

M&L for Plain Cement Concrete type C2, 1:3:6 (Using 40mm grded granite stone aggregate in concrete bed to drainpipes including packing under and haunching against the sides of pipes after they are laid tested for pipes of 150mm dia of pipes complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, and disposal off debris and rubbish to out side MD land complete all as specified and as directed.

M&L for precast cement concrete 1:2:4, type-B1 (Using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes & drains etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Labour only for cleaning of existing sewage lines of 150mm dia by rodding with split bamboo / cleaning rods so as to clean the blockage of line and for free flow of sullage up to the next manhole complete all as specified and as directed .

Cleaning existing manholes / septic tank by removing silt, debris, sludges deposited including bailing of water by mechanical pump and removed to a distance exc. 1 km and not exc. 1.5 km (Depth of deposited sludge only shall be measured and paid ) complete all as specified and as directed.

Labour only for cleaning of gully traps of any size including cleaning blockage in line from gully trap to first man hole complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

Material and Labour for Walling of random rubble [ KONDALITE STONE], uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:4 and finished even and smooth without using extra cement including water proofing compound mixed all as per manufacturers instructions complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

M&L for Plain / Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed blocks, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and as directed.

Material and Labour for rendering 15mm thick on fair faces of brick work / stone masonry or concrete surfaces in cement mortar 1:4 finished fair and even with out using extra cement complete all as specified and as directed.

Cleaning of covered drains of any size all as specified and directed including necessary removing cover slabs and replacing after cleaning complete all as specified and as directed.

Dismantling the existing unserviceable gully trap including chamber and material and labour for provision of salt glazed stoneware gully trap, square or round mouth, type 'P' of size 180 x 150mm, including setting and jointing in cement mortar 1:1, and necessary plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4, rendering in cement mortar 1:4 all round finished even and fair using extra cement, RCC cover slab in RCC type B1, 1:2:4 with suitable reinforcement etc, complete all as specified and as directed.

NIKESH ENTERPRISES

SRI SIMHADRI COMPANY

SRI VIJAYA LAKSHMI ENTERPRISES

SUNIL KUMAR GIRI

D.CH.SURYA PRAKASH

RAGHU RAMA PANDA