GENERAL-Kavanakkal RCB Hoisting platform renovation works-Kavanakkal RCB Hoisting platform renovation works-General Mechanical Work

Amount

Dismantling existing corroded chequered plate, CDU and Winch unit covers, Handrail pipes, etc.

OD29966/2022-2023:Dismantling and taking out old and corroded hoist unit and deck platform after cutting into pieces and stacking at a distance within 100m from the site conveniently and providing the same as per the direction from Deptl. officers at site.

Supply, Fabrication, Painting and Erection of Chequered plates, CDU and Winch unit covers, Handrails and painting of existing Hoisting bridge.

OD29969/2022-2023:Supply of MS chequered plates including cost of conveyance charges

OD33196/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD33197/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD33198/2022-2023:Supply of MS round bar including cost of conveyance charges

OD33199/2022-2023:Supply of MS BOLT and NUT up to 300mm Length including cost of conveyance.

OD33321/2022-2023:SUPPLYING & STACKING of Dia 32 mm NB (1 1/4'') G.I. PIPE

OD33320/2022-2023:SUPPLYING & STACKING of Dia 25 mm NB (1'') G.I. PIPE

OD4112/2023-2024:Fabrication and supply of Steel structures confirming to IS2062 Gr including chequered plates for platform, covers for hoisting unit etc as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges etc complete but excluding material already supplied and weight of pipes for hand rails etc

OD4113/2023-2024:Painting all the exposed surfaces of the chequered plates for platform with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD4117/2023-2024:Erection of the steel structures including chequered plates for platform, handrails etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD1307/2023-2024:Providing DRAIN HOLES of 20mm diameter on to the chequered plate platform of Hoisting bridges, etc.

Providing Engaging-Disengaging lever for Manual operating mechanism

OD1311/2023-2024:Providing engaging/disengaging mechanism on to the existing jaw clutch of manual operating mechanism.

MANAF V (BID ID -2194559)

ALI ASHRAF (BID ID -2195154)

MOHAMMED MUSTHAFA V (BID ID -2195454)

Bidder Name

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries

MANAF V

ALI ASHRAF