ADDN/ALTN TO CERTAIN SMQS AT AFS RAJPURA UNDER GE (AF) AMBALA

Amount

S&F PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls/floor including all fittings and cutting in RCC/brick work and making good complete all as specified and directed.

M&L for 40mm thick brick tiles laid and bedded in cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% or crude oil by weight of cement including dismantling of brick tiles or terracing tiles single layer on roof, cleaning and stacking the serviceable tiles for reuse, offering credit for unserviceable tiles and removing rubbish to a distance not exceeding 250 Mtr complete all as specified and as directed.

All as per BOQ srl item No. 2.00 above but except tiles, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate laid over roof slab as in padding to make good the depressions including demolition of mud/ cemented work in roof any thickness all as specified & directed by Engineer-in-Charge.

M&L for roughening surfaces of roof after removal of mud phuska/ cemented work completely and applying cement slurry with 3.00 Kg /Sqm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150gms/Sqm) laid on primed surface by forced application complete all as specified by torching process as per manufacturer instruction complete including cleaning of surfaces including side overlaps as specified, complete all as specified and directed. Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect. (iii) WPC shall paid Incl quoted rate

M&L for 15mm thick plastering in cement mortar 1:4 on RCC roof slab surfaces, finished even and fair without using extra cement complete all as specified and directed.

Supply only integral water proofing compound and mixed with cement Mortar as per manufacturer instructions, complete all as specified and as directed.

S&F steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410W (grade-E 250) quality-A complete all as specified and as directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing Fe-410- W(Gde?E-250) quality?B (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws / L type or J type hook complete all as specified and as directed.

Taking down Chowkhats with shutters (without taking off shutters from the frames) frames not exceeding. 1.5 sq. m each, complete all as specified and as directed.

Taking down Chowkhats with shutters (without taking off shutters from the frames) frames exceeding 1.5 not not exceeding 4 sqm each, complete all as specified and as directed.

M&L for Pressed steel frames size 125 x 60mm for doors with one or more rebates i including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 in filling inside frame & hold fasts etc complete all as specified and as directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc during fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )etc., complete, as specified, supplied and fixed all as specified and directed.

S&F factory made flush shutters 30mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces are covered and including painting with one coat of pink primer and two coats of synthetic enamel paint and supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 1 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf,and taking down if required, complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick, 2nd class hardwood rail and style plain, framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated including painting with one coat of pink primer and two coats of synthetic enamel paint and supply and fixing following items (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf, and taking down if required, complete all as specified and directed by Engineer-in-Charge.

S&F to chowkats, 35mm thick, 2nd class hardwood, glazed and skeleton double shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/wire gauze including wire mesh and painting with one coat of pink primer and two coats of synthetic enamel paint and supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 1 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf,and taking down if required, complete all as specified and directed by Engineer-in-Charge. Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a).

M&L for Mild steel, 300 mm, helical door spring including roller and roller plate, ISI marked, complete all as specified and as directed.

S&F Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by insrting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably scruwed suppling & fixing in opening, including taking down and making good finish complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site, including PVC Butt Hinges 100mm - 3 nos per leaf, PVC Tower Bolt 150mm long - 2 nos per leaf, PVC Handles 125 mm long - 2 nos per leaf and necessary fittings as required, complete as per specification and drawing including taking down complete all as specified and directed by Engineer-in-Charge.

S&F in repair 18/19mm Prelaminated particle board, interior grade prelaminated both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber/iron frame work of cupboard (including frame work, joinery fittings) complete all as specified and directed.

S&F steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 100mm size (02 Nos for each leaf) duly welded, including gauged and glazed Skelton shutter 30mm thick, complete with glazing bars dovetailed or welded including MS fillets, welding of 10 mm square guard bars,galvanised mild steel wire cloth, 0.63 mm nominal dia of wire, 3 mm thick sheet glass ordinary quality and glazing with oil putty and one coat of red oxide primer and two coat of synthetic enamal paint over window, frame & guard bars and taking down if required, complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed in repair with tinned tacks or galvanised wire staples, complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares/ractangular not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair, Harrison rails, steel, chromium plated with fixing brackets, stops, fancy type , 20mm bore having fancy end knobs at each end, fixed with rawl plug to wall as in curtain rods complete all as specified and directed. Note: quality & design shall be as approved by GE.

S&F mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings including running rails and guides and hanging, fastening, fixing and Cutting holes in brick/Stone/RCC walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete conforming to Fe 410E, Gde E-250, and taking down, complete all as specified and as directed.

M&L for Mild steel plain, black 1.25mm thick sheet in steel gates and similar work , cut to size, fixed to steel framing gates with plain 40mm lap joint with welded or riveted and taking down, complete all as specified and as directed.

S & F 500 ltr capacity rotational moulded PVC water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified SSR part I, including taking down complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Taking down of 15 mm bore GI tubing in any position complete all as specified and directed.

Taking down of 20 mm bore GI tubing in any position complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed.

S&F 20 mm bore GI tubing medium grade with all fittings to walls and ceiling or laid in floors including taking down complete all as specified and directed. .

Cutting chases in brick wall/concrete block or slab walls for concealed water tubing exceeding 10 cm but not exceeding 20 cm girth and making good complete all as specified and directed. .

S & F Vitreous china wash basin white flat back size 450 x 300mm incl waste pipe, brackets and 32mm dia bore CP coupling, Waste fittings, brass, chromium plated for glazed, ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. .

S & F Stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug washers waste pipe couplings brackets overall size 495x420mm with bowl size 410mmx 330mmx 160mm complete all as specified and directed.

S & F Soap dish vitreous china white, size 160X160X90mm fixedall complete all as specified and as directed.

S & F 15 mm bore Concealed stop cock fancy type CP with long shank and cup washer complete all as specified and as directed.

S & F Angle stop cock fancy type CP with long shank 15mm bore as in repairs complete all as specified and as directed.

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

S & F Fancy type bib tap CP ( Long body) 15mm bore as in repairs complete all as specified and directed. .

S & F 15 mm bore CP Pillar taps, fancy type cast copper alloy, with capstan heads, screwed down high pressure, without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. complete all as specified and directed.

S & F CP grating 125mm dia as in repairs with or w/o circular hole for inserting waste pipe complete all as specified and directed.

S & F PVC connection 15mm bore with PTMT nuts and washer 45cm long complete all as specified and directed. complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe complete all as specified and directed.

S & F PVC valveless symphonic action type, flushing cistern low level 10 ltr, white with inlet, ball valve, float and handle in fixed in repair. complete all as specified and directed.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

Supply and fixing in repairs, 20 mm bore Brass CP mixer for Wall fitting, and for wash hand basin, mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness and rubbish off the premises complete all as specified and as directed.

M & L for Cement concrete 40mm thick type B-0 1:2:4(12.5mm graded mechanically crushed stone aggregate) in floor/sub base complete all as specified and as directed.

M&L for joint free, non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc set and jointed in neat cement slurry and pointed in white/coloured cement to match, incuding 15mm thick screed bed in cement mortar 1:6, complete all as sepcified and directed.

M&L for first quality, glazed ceramic color tiles in vertical surfaces size 450x300x7mm thick, including 10mm thick rendering as backing in CM (1:4), set and jointed with grey cement slurry and pointed in white or coloured cement to match complete including Dismantling of wall tiling including cement mortar bedding and backing all as specified and directed by Engineer-in-charge.

M&L for Granite of 20mm thick (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite,complete all as specified and as directed.

S&F machine crafted box type cabinet for kitchen using 19 mm thick HDHMR board with single Side Prelaminated particle and other side plain coloured sheet with and including all necessary fittings and fixtures to install the wire basket, shutters shall be fixed by using full overlay MS clip on hinges high quality nickel plated satin finish size 101mm-150mm, 02 Nos per leaf , including all all fittings , channels , 150 mm S/S Handles complete all as specified and directed. Note : (i) Wire basket shall be measured separetely. (ii) Front area of box shall be considered for payment purposes. (iii) Depth of box shall be equal to the width of cooking platform.

S&F wire basket made of top quality 304 grade stainless steel , Nickel chromium plated (Ni 4 %) of approved design and pattern complete all as specified and directed.

M & L for brick work with sub class `B' bricks old size in CM 1:4 straight or curved on plan exceeding 6m mean redius in damaged man holes septic tank/soak well etc including demolition down if required, complete all as specified and as directed.

Taking down cement plaster of any description on brick walls/ceiling etc including racking out joints hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work on wall or on concrete surfaces in cement mortar 1:4 and finished the surfaces fair and even smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on other than fair faces of brick work on wall or on concrete in cement mortar 1:6 and finished the surfaces fair and even smooth without using extra cement (including taking down if required) complete all as specified and as directed.

M&L for rendering 10mm thick on on ceiling in two coat (5 mm each) in cement mortar 1:3 and finished the surfaces fair and even smooth without using extra cement including taking down if required) all as specified and directed.

M&L for preparing newly plastered surface and applying two coats of oil bound destemper over a coat of plaster of paris putty of 1 mm thickness over plastered surface complete all as specified and directed.

M&L for preparing of new plastered surfaces of walls and and applying two coats of cement base paint, incl border blue(apex) on rcc/parapet etc, complete all as specified and directed.

M&L for preparation of new plastered surface of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded mechanical crushed stone aggrgate Cement concrete in foundations, filling, mass-concrete and in flooring/sub base including hacking out complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base (CM 1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection, floors and like finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,10 mm wide. (ii) 30 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.

M & L for preparation of existing treated surfaces on walls/ old treated external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying one coat of cement base paint @ 5 sq.m/kg/1 coat over a coat of exterior wall primer by using branded cement based paint and including exterior grade weather proof paint water based in blue colore on RCC surfaces and parapet walls etc, including filling wall putty in minor holes/depressions, sand papering etc, including repair of plastering patch each not more than 0.25 Sqm complete all as specified & as directed by Engineer-in-Charge. Note : The item rate should include for work upto any height. cost of necessary scaffolding and security provision of labour shall be deemed to be included in the quoted rate.

M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of oil bound distemper including a coat of plaster of paris putty of 1 mm thickness over plastered surface to make surface even and smooth, complete all as specified and directed.

M&L for Two coats of white wash on ceiling surface incl preparation of old plastered surfaces. complete all as specified and as directed.

M&L for Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old wooden surface and applying one coat of synthetic enamel paint, of surface, over 10 cm width or girth, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.

M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic concealed coduit ISI marked with accessories concealed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :-

One light point controlled by one switch SP one way.

One ceiling fan point controlled with one 5A switch

One exhaust fan point controlled with one 5A switch

One 3 pin socket outlet 5Amps on independent board.

One 3 pin socket outlet 5Amps on same board with other switches.

One bell pont controlled by one bell push 5 amps independent board.

M & L for point wiring for AC/ Geyser and one 3 pin socket outler 15 Amps independent with cable 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & includingPVC non-metallic concealed coduit including PVC bend, tee joints etc as per site requirement , ISI marked with accessories concealed in wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly and PVC non-metallic concealed conduit ISI marked of size not less than 20/25mm width, complete all as specified and as directed.

M&L for point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic concealed coduit including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly, complete all as specified and as directed.

Taking down rusted and old version switches . S&F Modular Switch , 6Amp, One way, 1 module, ISI marked complete all as specified and directed. (NIXON).

Taking down rusted and old verson bell push. S & F modular type bell push 6 amps 1 module complete all as specified and directed .

Taking down rusted and old verson switches .S&F Modular Switch , 16Amp, One way, 1 module, ISI marked, complete all as specified and as directed.

S&F in replacement bell electric AC 230 volt single pole ding dong with ISI mark complete all as specified and directed .

Taking down rusted and old verson socket. S&F Modular Socket , 6 Amps, 2/3 pin combined 2 module, ISI marked, complete all as specified and as directed.

Taking down rusted and old verson socket. S&F Modular Socket , 16Amps, 6 pin combined 2 module, ISI marked, complete all as specified and as directed.

Taking down rusted and old verson fan regulator . S&F Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module, ISI marked., complete all as specified and as directed.

Taking down rusted and old verson fan regulator . S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed.

S&F Modular white cover plate with Frame 2 Module, ISI marked, complete all as specified and as directed.

S&F Modular white cover plate with Frame 3 Module, ISI marked, complete all as specified and as directed.

S&F Modular white cover plate with Frame 4 Module, ISI marked, complete all as specified and as directed.

S&F Modular white cover plate with Frame 6 Module, ISI marked., complete all as specified and as directed.

S&F Modular white cover plate with Frame 8 Module, ISI marked, complete all as specified and as directed.

S&F Modular metal flush box 2 module ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed.

S&F Modular metal flush box 3 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed.

S&F Modular metal flush box 4 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed.

S&F Modular metal flush box 6 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed.

S&F Modular metal flush box 8 module , ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed.

Taking down old U/S light. Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Taking down old U/S light . Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down old U/S holder. M&L in replacement Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engr-in-charge.

Taking down old U/S LED lamp. S&F in replacement LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply, complete all as specified and as directed.

Taking down old rusted and broken DB. S&F in replacement 08 way Double door SPN type having protection IP 54, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :-

Taking down rusted and unserviceable MCB . S & F MCB SPN 63 Amps, 10 KA rating complete all as specified and directed.

Taking down rusted and unserviceable MCB . S & F MCB SP 16-32 Amps, 10 KA rating complete all as specified and directed.

Taking down old damaged and burnt sub main. Supply and fixing submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC n non metalic concealed conduit ISI marked of suitable size not less than 25 mm , ISI marked including 1 single core cable with stranded copper conductor of size 4 Sqmm (green colour) for earthing. Note : 2 runs of 4 Sqmm cable, 1 run of PVC Conduit and 1 run of 4 Sqmm cable shall be measured as 1 Run.

Taking down old U/S plug socket . S&F in replacement Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners.

Taking down old rusted fan. Supply and fixing ceiling fans complete with blades, down rods with sefty GI wire connecting up to fan hook, electronic regulaor and accessories , 230 volts , 1200 sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with (BLDC) brushles diret current motor and connectding up including provision of flexible 3 core copper cable, complete all as specified and directed. Note:- (a) Taking down U/S Fans of any capacity will be deposited in MES store yard : cost of transportation from site to MES store yard shall be deemed to be included in the quoted rate.

Taking down old U/S exhaust fan . Supply and fixing exhaust fan , steel body AC single phase, 230 volt of size 250 / 300 mm sweep 1200 RPM with blades, and frame and louvers complere fixing arrangements on the wall with nuts and bolts making the good surfces all as specifed and directed at site Note:- (a) Taking down U/S Ext Fan of any capacity will be deposited in MES store yard cost of transportation from site to MES store yard shall be deemed to be included in the quoted rate.

Making round/ square hole cutting in the kitchen wall with the help of cutting machine / chisel / hammer etc for fixing of exhaust fan of size 250 mm to 300 mm & making good to the distrubed surface including plaster, distumper , white wash complete all as specified and directed.

Taking down old U/S geyser . Supply and fixing and testing and commissioning of Instent type water heater (geyser) vertical type of 25 Ltrs capacity , single phase, vertical type, Rust Resistant, ABS made with thermal cut off with power consumption 1500 watts, ISI marked, BEE 5 star rating including fixing on wall with chroumium plated screws & nut bolts , connection to water pipe line and electric connection complete all as specifed and directed by Engr-in-Charge. Note:- (a) Taking down U/S geyser of any capacity will be deposited in MES store yard cost of transportaion from site to MES store yard shall be deemed tobe included in the quoted rate.

Taking down old U/S pipe . Supply and fix hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specifed and directed

Taking down old U/S pipe . Supply and fix cold water 450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specifed and directed

S & F GI Tube medium grade dia 15 mm dia concealed to walls for making water connection of Geysers all as specified and directed.

S & F Stop valves 15mm dia cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed bothends for ironpipe or for unions and fixed complete all as specified and directed by Engineer in Charge.

S & F Bib taps, 15 mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specifed and directed

R. P. Suppliers and Construction Co. (BID ID -3370175)