Require Repairing Work of different municipal buildings in sarkhej ward of south west zone

Name of Work: - As per name of the work mentioned in Tender.

*Special condition of contract for Item_(Providing and laying of interlocking grey paver blocks unishape

of high density 60 mm thick...)mentioned in Technical volume.

● Successful bidder of this tender shall have to purchase 50% of total quantity of paver block from

Amdavad Enviro Projects Pvt. Ltd. The paver blocks shall be as per tender BOQ & tender specifications.

Payment of such 50% Quantity shall be made to Amdabad Enviro Projects Pvt.Ltd. directly by the

successful bidder on mutual agreement of rate between successful bidder & Amdabad Enviro Projects

Pvt. Ltd. AMC shall not be responsible for any kind of dispute between Amdabad Enviro Projects Pvt. Ltd. &

successful bidder or this tender. The successful bidder will be paid by AMC as per tender BOQ item rate +

● The quality, size, shape, compressive strength & other technical parameter of paver Block shall be as

per IS standards & tender specification and shall be completely successful bidder's responsibility.

● If in case of failure of paver Block or if Paver Block are not as per the standards, the same shall be rejected.

Successful bidder shall remove such failed paver blocks immediately form site and fix new paver blocks as

● The successful bidder shall produce a certificate /bill from Amdabad Enviro Projects Pvt. Ltd. showing

quantity of Paver Block which should be minimum 50% of total quantity.

1. All the relevant causes mentioned in the Tender which are related to above clauses shall be read as

mentioned in above AMENDMENT.

2. The above Amendment shall be Part of Tender document & shall be bound to Contractor and shall be

submitted along with other tender documents with duly signed and stamped.

Seal and signature of the bidder Additional City Engineer

Date :- AHMEDABAD MUNICIPAL CORPORTION

Tender Fee : Rs 900.00 Date of submission : 02.03.2026 Time: :18:00 Hrs

Earnest Money : Rs. 9999.00 Date of Opening : 03.03.2026 Time: 16:00 Hrs

Contractor’s Name & Address :

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

SOUTH WEST ZONE

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTEMENT- SOUTH WEST ZONE

Name of Work:- Require Repairing Work of different municipal buildings in sarkhej ward of

south west zone

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation up to1.5 m depth including sorting

out and stacking of useful materials and disposing of

theexcavated stuff upto 50 Meter lead.(A) Loose or soft

soil (R & B S.O.R 2023-24 I.no. Item Code 04001A)

50 Upto 1.5 mt Depth 115.92 Cmt

20 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidation each deposited

layer by ramming and watering.

Providing and laying cement concrete1:5:10 (1-

Cement: 5- coarses sand and:10-hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formworkin (A) Foundation and

4 3 (A) wall caps/coping 2653.67 Cmt

Providing and laying cement concrete1:3:6 (1-

Cement: 3- coarses sand and:6-hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formworkin (A) Foundation and

Providing and laying cement concrete 1:3:6 (1-

Cement:3-coarse sand:6-crushed stone aggregates

20mm nominal size) and curing complete including cost of

formwork in (A) wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm

nominal size) curing complete excluding cost of

formwork and reinforcement.

Foundations, footings, base or columns and mass

a 5 concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams,

b 7 girders and cantilivers upto floor two level 4012.47 Cmt

c 3 Independent piers, columns, and pillars, upto floor two level 3661.3 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregates 20 mm nominal

size) for reinforced concrete chhajjas not exceeding

10 cm. thickness upto floors two level including

finishing the exposed surfaces with cement mortar 1:3

(1 cement : 3 find sand) to give a smooth and even surface

centering and form work and curing complete

excluding cost of reinforcement.

Providing and laying controlled cement concrete /

Ready Mix Concrete of M-200 and curing complete,

excluding the cost of form work and reinforcement for

reinforced concrete work in:

Foundations, footings, base of columns, and mass

(A) 2 concrete. 3977.88 Cu.M.

(B) 0 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and

(C) 0 Cantilever upto floor 4460.36 Cu.M.

(D) 2 Columns, pillars, posts, and struts, up to floor two level. 4558.2 Cu.M.

(E) 1 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) 1 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4

(1-Cement 2-coarsesand: 4-graded stone aggregates

mm nominal size) and finishing smooth with curing etc.

complete including the cost of form work but excluding the cost

of reinforsement for R.C.C work in (iv) Slabs having more

than 13 cm and upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4

(1-Cement 2-coarsesand: 4-graded stone aggregates

mm nominal size) and finishing smooth with curing etc.

complete including the cost of form work but excluding the cost

of reinforsement for R.C.C work in (iv) Slabs having more

than 8 cm and upto 10 cm.thickness

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm.in

foundation and plinth in Cement Mortar1:6 (1-Cement

:6 - fine sand)

10 (A) Conventional (upto 10 ton) 3981.21 Cmt

10 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for super

structure above plinth level upto floor two level (B)

13 0 Conventional

a 20 (A) Conventional 272.25 Cmt

b 10 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular Per

D) above floor two level Item No. 2(6.13) (B) Conventional Per

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in

foundation and Plinth conventional brickwork

Extra for half brick masonry in super structure above

15 5 plinth level upto floor two level (B) conventional 52.8 Smt

Providing form work in ordinary timber planking so as

to give a rough finish including centering, shuttering,

strutting and propping etc. height of propping and

centering below supporting floor to celling not exceeding

M & removal of the same for in situ reinforced or plain

concrete work upto floor four level

Foundation, footings, bases of columns etc. and mass

a 3 concrete. 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs

Landings and the like. (1) Floors etc. upto 200 mm in

b 5 thickness. 252 Smt

(B) Flat surfaces such as soffits of suspended floor roof slabs

Landings and the like. (2) Floors etc. above 200mm in

c 5 thickness. 270.9 Smt

Vertical surface such as walls (any thickness) partitions and

the like including attached buttresses & string course & the

d 5 like. 229.95 Smt

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers,

Girders, Bressumers And Lintels Not Exceeding 1 M In

e 4 Depth. 192.15 Smt

(G) Columns PillarsPosts and struts. (1) Square Rectangular

f 2 Polygonal in plan. 297.68 Smt

g 2 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-

levers Girders Bressumers and Lintels exceeding 1M.in Depth.

Providing and fixing 35 mm thick panelled, glazed or

panelled and glazed shutters for Doors windows and clear

story windows including anodised alluminium But hinges

with necessary screws and indian teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup

boards etc. including black enamelled M.S. butt hinges

with necessary screws.(A) Indian teak wood. (i) Fully

Providing and fixing 25 mm thick shutters for cupboards etc.

including anodised alluminiu butt hinges with necessary

a 1 screws. (A) Indian teak wood. (ii) Fully Glazed. 3006.75 Smt

Providing and fixing 25 mm thick shutters for cupboards etc.

including anodised alluminiu butt hinges with necessary

screws. (A) Indian teak wood. (ii) Partly panelled and partl

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame 10 cm. x

7 cm. size including 3 coats of oil painting to wood work

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame 10 cm.x7

cm. size including 3 coats of oil painting to wood work

etc.complete.with wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete.(ii)

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian teak

wood frames 10 cm x 7 cm. size including black enamelled

iron oxidixed fixtures and fastenings including

primer coat of approved quality and two coats of oil painting

etc, complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames

cm x 7 cm. size including anodized alluminium fixtures and

fastenings including primer coat of approved quality and two

coats of oil painting etc, complete. (iii) Partly panelled and

Providing and fixing 30 mm thick FACTORY MADE

SOLID PANEL PVC DOOR SHUTTER consisting of frame

made out of M.S.tubes of 19 gauge thickness and size of

mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom

rails.M.S. frames hall have a coat of steel primers of

approved make and manufacture, M.S. frames Shall be

covered with 5 mm thick heat moulded PVC ‘C’ channel

of size 30 x 50 mm formings tiles, and 5 mm thick 75 mm

wide PVC sheets for to prail, lock rail and bottom rail on either

side, and 10 mm (5 mm x 2) thick, 20 mm wide cross PVC

sheet as gap insert for top rail and bottom rail, Panelling of

stiles and rails with 30 mm wide x 5 mm thick PVC sheet

beading on eighter side, and joined together with

solventcement adhesive,. An additional 5 mm thick PVC strip

of 20 mm width is to be stculkon the interiors side of the

‘c’ channel using PVC solvent cement adhesive

etc. complete as per direction of Engineer incharge,

manufacture’s specification and drawing.

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonal 20 x 5 mm size with top and bottom

rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys

complete with bolts, nuts, locking arrangements, stoppers,

handles, including a priming coat of red lead paint &

Providing and fixing 1 mm thick M.S. sheet sliding

shutters with frame and diagonal braces of 40x40x6

mm angle iron, 3.15 mm M.S.gusset plates at Junctions and

corners 25 mm dia. pulley, 40x40x6 mm angle

and T-iron guide rail at top and bottom respactively

with handles, stoppers and locking agangement etc,

including applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame

using approved quality anodised extruded alluminium

section as approved by Engg.in charge(Jindal

alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter

bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at

1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45

mm at (1.37kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard quality fixed

with glazing chips on upper pannel & Laminated sheet on

lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction

of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having

extruded aluminum Colour r Powder Coated section frame

main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384

Kg/mt,horizontal Four track member size 122.20mm x

31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of

size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with

sliding shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

Providing & Fixing in position Alluminium vents with frame

using approved anodised extruded alluminium section

as approved by Engg. In charge.(Jindal

alluminium) units equivalent Approved Rate)Frame section

of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing &

Installing 5 mmthick approved color Acrylic sheet of

standard quality etc. comp. Sq.

Providing and fixing standared extruded of alluminium

section of size 63 mmx38.10 mmx1.2 mm (Jindal

Section:2434, or equivalent @ Wt.0.643 Kg/mt) with

colour anodized alluminium frame for ventilation with

mm thick frosted glass as details etc complete for

Ventilation Sq.

Providing and fixing standared extruded of alluminium section

of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with

colour Powder Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as details etc

complete for Fix Partition

Providing and laying 40 mm thick marble chips flooring

rubbed and polished (I.E.terrazo) to granolithic finish with

under layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-

coarse sand: 4-graded stone aggregate 10 mm and

down gauge) and to player 10 mm thick with white, black or

white and blak marble cihps of required sizes from 1 mm to

mm nominal size laid in cement marble powder mix 3:1 (3-

Cement:1-Marble powder by weight) in proportion of

4:7 (4- Cement: 7-marble chips by volume) (C)

Medium Shade pigment with approx 50% white cement

and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or

dedo rubbed, and polished to Granolithic finish to player

mm white, black or white and black marble chips of

size from smallest to 4 mm nominal size laid in cement

marble powder mix 3:1 (3-Cement: 1 marble powder by

weight) in proportion of 4:7 (4-cement marble powder mix: 7-

marble chips by volume) (B) Light shade pigment with white

cement (In top layer only)

Providing and laying white glazed tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

Providing and laying Ceramic tiles 6 mm thick in flooring

treads of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3 (1- cement :3-coarses and) finishing with

flush pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative

Granite Board with Computerised Golden Letters

Discription as per instructions of engg. in charge to

M.S. frame structure for Inaugaration & Public

Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in

flooring treads of steps and landing laid on a bed of

mm thick cement mortar 1:3 (1-cement:3-coarses and)

finishing with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in

skrting risers of steps and dedo on 10 mm thick cement

plaster 1:3 (1- cement: 3-coarse sand) and jointed

with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting

risers of steps and dedo on 10 mm thick cement plaster

1:3 (1-cement:3- coarse sand) and jointed with white

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1- cement : 3-coarse sand ) finishing

with flush pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm

th.Double Charged Gloosy / Matt tiles of Approved

make as Approved by Adl.C.E. / Consultants for upto 10 cm

high skirting as approved by Engineer in charge over

mm thick cement mortar 1:6 (1 cement : 6 coarse sand)on

new surface& jointed with colour cement slurry incl with

flush pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring over

20 mm (Average) thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5 (1-Lime

putty:1.5-coarses and) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. (A)

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and

jointed with gray cement slurry including rubbing and polishing

complete. (A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over

20 mm (Average) thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5 laid over and jointed

with grey cement slurry including rubbing and polishing

etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick in

risers of steps, skirting Dedo and pillars laid on 10 mm thick

cement mortar 1:3 (1-Cement :3 coarses and) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarses and:4-graded stone aggregate

20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarse sand:4-graded stone aggregate

20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and

extending them up to15 cm along the wall, clearing with

water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the

size 300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in

skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1cement: 3 coarse sand) & jointed

with white cement slurry.

Providing ridges or hips 600 mm overall in plain G.I.

sheet class-3 fixed with G.I. J or L Hooks and nuts 8 mm

dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm

Providing and fixing 150 mm wide 450 mm over all semi

circular plain G.I.sheet class-3 gutter with Iron brackets

mmx3 mm size Bolts, Nuts, washers etc. including

making necessary connection with rain water pipes. (i)

mm thick Sheet.

Providing and fixing five courses water profing

treatment with bitumen felt consisting of second and

fourth course of blown/ bitumen or/and residual

bitumen applied hot at 1.2 kg.per Sq.M.of area for each

course and first course with fibre base bitunen

saturated under lay type land third course with fibre base self

finished felt type 2 grade 1 and fifth and final course of

stone grit 6 mm and down size or pea sizes gravel

spread at 8 Cu.Metre/Sq.metre

preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water pipe

including filling the joints with spun yarn soaked in neat

cement slurry and cement mortar 1:2(1- Cement : 2-

fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for interior

plastering up to floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats)

over and including a primary coat of white washing to

give an even shade after through brooming the surface to

remove all dirt, dust, mortar drops and other foreigh

Removing dry or oil bound distemper by a

washing and scraping and sand papering the wall

surface smooth including necessary repairs to

scratches complete.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall

surfaces of given an even shade, over and including

a priming coat of whiting after thoroughly brooming

the surface free from mortar dropping and other foreign

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade

on wall surfaces to give an even shade, over and

including a priming coat with distemper primer of

approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.

Extra Coat for Above Item over above for every

60 10 subsequent coat of approved brand and manufacture. 30.09 Sqm

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Extra over item for every sub sequent coat of wall

62 10 painting with plastic emulsion paint of approved brand 33.39 Sqm

Extra over item for painting with plastic emulsion paint of

62 a 10 approved brand on ceilings and sloping roofs. 5.36 smt

Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil, grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers

and sand paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the surface

an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

66 10 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat) on new

steel and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the

surfaceofalldirt,dust and other foreign matter.

Painting one coats (excluding priming coat) on previously

printed steel and other metal surface with synthetic enamel

paint, brushing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

Extra over Above item for every sub sequent coat of paint.

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black, anti

corrosive to give an even shade including cleaning of all

dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black, anti

corrosive to give an even shade including cleaning of all

dirt, dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new

wood and wood based surface with enamel paint, interior

to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter sand

papering and stopping. (a) Ready mixed paint brushing wood

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint,

to give an even shade including cleaning the of all dirt, dust

and other foreign matter.(b) Ready mixed paintbrushing

priming for enamel

Extra over Above item for every sub sequent coat of paint.

Painting two coats (excluding priming coat) on new

wood and wood based surface with ready mixed paint,

brushing, oil, gloss, semi gloss to give and even shade

including cleaning of all dust, dirt and other foreign

matters and papering and stopping.

Painting the kids picture chart & letter writting of different size

76 15 and shapes as per details/design etc.comp. as dire. 6500.00 No

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape

even shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials.etc complete

Applying two coats of Birla (white cement based) or

Asian (acryliclapy-putty) or equivalent & two coats of

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint, to

give an even shade including

cleaning the of all dirt, dust and other foreign matter.

Writing letter or figures on any surface with black

japan paint (stops, comas, hyphens and the like not to be

measured and paid for separately) (i) Block

(Letters/Figures) (Per 10 Letter pet CM.HT)

Demolition including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift. (i)

81 2 R.C.C. work 1047.38 Cu.M.

Demolition of Brick work and stone masonry including

stacking of serviceable materil as and disposalof

unserviceable materials with all lead and lift.(ii) In Cement

Dismentaling tiled of stone floors laid in mortar including

stacking of serviceable materil as and disposal of

83 5 unserviceable materials with all lead and lift. 47.25 Sqm

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materil as

and disposal of unserviceable materials with all lead

and lift.(i) G.I.sheet roofing.

Dismentling steel work including distempering and

85 5 stacking the materials with all lead and lift. 2.42 Kg.

Dismentling doors, windows, ventilators etc. (wood

or steel) shutters including chowkhats architraves,

hold fasts and other attachment etc. complete and

stacking the material within all lead and lift.(i) Not exceeding

Dismentling doors, windows, ventilators etc. (wood

or steel) shutters including chowkhats architraves,hold

fasts and other attachment etc. complete and stacking

the material with in all lead and lift.(ii) Exceeding 3 Sq.M.in

Dismentling barbed wire in fencing including making rolls

and also including dismentling fencing posts including all

earth work concrete in base and making good the

disturbed ground stacking useful materials as directed

and disposing as directed and disposing of the

unserviceable materials with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain

water pipes with fittings and clamps including stacking the

89 1 materials with all lead and lift (for any dia, of pipe) 74.03 Rmt

Dismantling santtary fittings like wash basin . W.C. pan

Indian and Europe an type, flushing tank etc. including

90 1 stacking the materials with all lead and lift 401.63 Each

Scraping oil paint from steel and other metal surface and

91 10 making the surface even (with Hand Scraping.) 48.83 Smt

Removing and scraping of old deteriorated plaster

of any thickness from wall / R.C.C member

including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and

size as specified in existing R.C.C. slab including cutting

93 5 chase and making good. 168.53 Each

Cutting out cracks of roof terrace to V-section, cleaning out,

wetting, grouting with cement and sand slurry 1:3 (1-

94 1 cement 3-sand ) 64.58 Rmt

Cutting out cracks roof terrace to V-Section cleaning out

and filling solidly with a hot mixture of bitumen and

95 1 clean dry sand (1:1 by weight) 75.29 Rmt

Providing & Fixing in position Alluminium doors with

frame using approved quality anodised extruded

alluminium section as approved by Engg.in charge(Jindal

alluminium)(a) Frame sections 101.6x44.45 mm (b)

Shutter bottom vertical & top section 83.5x44.45

(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at

100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm

thick approved color Acrylic sheet of standard quality

fixed with glazing chips on upper pannel & Laminated

sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as

direction of engg.in charge.(N.S.) Sq.

Providing & Fixing in position Fully Panelled / Partly Panelled

Partly Glazed / Fully Glazed Alluminium doors with frame

using approved quality anodised extruded

alluminium section as approved by Engg. In charge.(Jindal

alluminium )(a) Frame sections 101.6x44.45 mm b)

Shutter vertical & top section 83.5x44.45 (wt.

kg/mt.)( at 1.31 kg/mt) © Shutter bottom section at

x44.45mm at ( 1.37 kg/mt ) Shutter middle section at

100x44.3 wt. (1.37 kg/mt ) incl. providing & installing 5 mm

thick Glass of standaed quality fixed / 12 mm thick

Laminated sheet with glazing chips (wt. 0.13 kg/ Rmt) in

panels etc. comp. as per Detail Given & direction of

engg.in charge.

Providing & Fixing in position Alluminium window

2/3/4 track sliding / fix type with frame using approved

anodised extruded alluminium section as approved by Engg.

In charge.(Jindal alluminium) units equivalent.

including P/F installing 5 mm thick clear/tinted Glass of

standard quality etc.comp. Sq.

Providing & Fixing in position Alluminium vents with frame

using approved anodised extruded alluminium section

as approved by Engg. In charge.(Jindal

alluminium) units equivalent Frame section of 63.50 x

mm. (wt.0.68 Kg/Rmt) incl. Providing & Installing 5 mm

thick Glass of standard quality etc. comp. Sq.

Providing and fixing of Ridge flashing for roof panel

shall be made out of 0.5 mm thick pre coated GI

sheet. The Pre coatedsheet shall be of minimum

mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per

IS:277:1992, 5-7 microns epoxy primer on both side of

the sheet and polyester top coat 15-18 micron. The PP GI

Sheet shall have plastic protective guard film of minimum

25 microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by poprivetor

self drilling/self stitching fastners @ maximum 450mm c/c

along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having

1-2 mm thickness as per directed by engineer

101 1 incharge etc as completed (N.S.) 963 Smt

Providing and laying 15mm bamboza wooden flooring

as per architect's drawing with all necessary details

as directed by the project consultants. Use underlay

for better result as per Detail specifications and directed

by the project consultants. (N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing with

Metre long M.S. Angle posts 40 mm x 40 mm x 6 mm and

oil painting 3 coats fixed at 2.5 Mt, C/c. with five

Horizontan lines and two diagonals of galvanised steel

barbed wire weighting 9.38 Kg. per 100 Metre, strained and

fixed to posts with G.I, staples including fixing the posts

in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10

Renovation and Repairing work in Chainlink fencing any

size and also refixing work incl. febrication work with all

materails to be painted one coat of primer and twocoats

of paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm.

thick over B.B. masonry in C.M, (1:6) in front and dwarf wall

1.0 Mt. high and 23 cm. thick cement plaster to

masonry / in C.M.1:3) and cement concrete flooring in 1:2:4:

mix 5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm

high resting on B.B. Masonry walls 23 cm. thick in C.M.

(1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick

slab with marble chips set in C.M. (1:6) (6 mm thick

terrazo) with plastering on exposed faces walls in C.M.

(1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade

for below ground level to vertical upto any floor with

delivery & suction Pipe & Pump etc. The rate includes fule,

pump operator, skilled labor, driver etc completed and as per

direction of engineer in charge

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the surface

as per requirement. The rate including all machinaries,

labor, loading, unloading, transportaion etc

complete as per direction given by engineer incharge.

Carrying out timber treatment to all wood work including

drilling holes and spraying oil based chemical solution on

surface of timber work for termite control including labor and

material etc. complete. Using Chlorpyriphos20 EC as per

2013 Part III (1% concentration by mass) is recommended one

litre chemical emulsion diluted with 19 liters of kerosene. Total

diluted concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood surface not

protected by paint or varnish.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical /Sqm

surface is recommended as per I.S.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite

control treatment including labour and material consist

ment with I.S. specification. Using Chlordene and

Chior purfiles 20 EC. As Per 6131_paret-II

Consentration Weight on percentis recommended i.e one

litre 20 EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre chemical emulsion

appication attherate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Carrying out wall treatment for termite control including

spraying with chemical solution in oil base including labour and

material Using Chlorpyriphos 20 ECAs per IS 6313 part - II

(1% concentration by mass) is recommended i.e one litre

emulsion diluted with 19 liter oil base. Total solution will be

liters inclusive of one liter chemical emulsion application at the

rate of 7.5 litre chemical / Sqm of surface is recommended as

Providing erecting and fixing double coated Syntex

or equivalent PVC.(ISI) water tank of required capacity

each with all necessary fittings and connection etc.

complete on terrace.

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes (Medium grade) of the following

nominal bore, tube fitting and clamps including making good

the wall ceiling and floor.

1 (F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised mild steel

tubes (Midium grade) of the following nominal bore,

and tube fitting (Earth work in trenches to be

measured and paid for separately)

Making connection of galvanised Mild steel distribution

branch with galvanised mild steel main 50 mm to 80 mm

nominal bore by providing and fixing tee including

cutting and threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2

working pressure poluthene pipes of the following out

side Dia. Low densidy, complete with special falnge

compression type fittings,wall clips etc.including

making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out

side Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including

making good the wall ceiling and floor.

1 (C) 32mm 116.4 Rmt

Providing and fixing cast iron (Spun) Nahni trap of

the following nominal diameter of self cleaning design with

C.I. screaed down or higned grating including cost of

cutting and making good the walls and floor 100 mm inlet and

50 mm outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan

(Indian type W.C.Pan) size 580 mm (Earth work, bed

concrete, foot rest and trap to be measured and paid for

separately) (A) Vitreous China. (I)Long pattern = White

Provdg. & fixing wall mounted White / Color

Vitreous China European water closet with integral

P trap of "Cera" - Clair Series or equivalent incl. seat

cover , Chair Bracket etc. complete as per direction of engg. In

Providing and fixing wsh down water closet (Europe

an type, W.C.Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar1:1 (1-

Cement:1-fine sand) (Seal and cover to be measured and

paid forseparately) (A) vitreous China Pattern :(i) in white

Provdg. & Fixing Flat Back Large Urinal of White/ colour of

"Cera" or " Hindware" incl. C.P. Brass waste coupline

waste pipe, pvcconnection etc. Complete.( size

Providing & Fixing Angle cock of " Ess Ess" - Trend

series or equivalent standard make as approved by

124 1 engg. in charge all complete. (N.S.) 675 No.

Providing and fixing 100 mm size P or S trap for

water closet squatting pan including jointing the trap with the

pan and soil pipe in cement Mortar1:1 (1-Cement : 1-Fine

sand)(A) Vitreous China.

Providing and fixing wash basin with single hole for pillar

tap with C.I.or M.S. brackets painted white including sutting

holes and making good the same but excluding fittings.

(A) Vitreous China: (ii) Flat Back wash basin 550 mm x v

mm size.(i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making

good the same but excluding fittings. © Vitreous China

Sink. (i) 600 mm x 450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled edge

mirrror of superior glass mounted on 6 mm thick A.C.

sheet or ply wood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

Providing and fixing chromium plated brass halftrun flush cock

of approved quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter

wash basin with signle hole for pillar tap of "Cera " -

Concord series of 550 x425 mm size to be fiited in stone

counter with necessary brackets painted white incl.

cutting holes and making good the same .Cost Includes

P/F C.P. brass waste coupline, 32 mm dia fisher union

mm dia. Pillar cock & Angle cock of " Ess Ess"- Trend

series ,32 mm dia. Waste pipe etc. complete as per

dir. of engg. in charge.

Providing and fixing washbasin with single holefor pillar tap

with C.I. or M.S. brackets painted white including sutting holes

131 and making goodthe same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v400mm size. (i) In

Providing & Fixing S.S.304 Grade Sink of Nirali /

132 Krishna or Equivalent Make for Kitchen Platform of

1 size : 24":x18" as per Direction of engg. In charge 4,650.00 No.

Providing and fixing C.P. brass towel rail comlete with

133 C.P.brass brackets fixed to wooden plugs with C.P.

1 brass scews.(B) 600mm x 20mm size. 597.22 Each

Providing and fixing 600 mmx120 mm glass shelf with

134 C.P. brass bracket and guard rail complete mixed to

1 wooden plug with C.P.brass screws. 561.03 Each

135 1 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size.

136 (A) Brass screw down bib tap polished bright.

1 (i) 15mm dia. 184.98 Each

1 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size.

137 1 (B) Brass chromium plated screws down Bib Tap.

1 (i) 15mm dia. 184.98 Each

1 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following

138 1 size. © Gun metal screw down bib tap.

1 (i) 15mm dia. 157.29 Each

1 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw

139 1 down high pressure with screws, shanks and back nuts.

1 (i) 15mm dia. 305.67 Each

1 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return

140 1 fullway wheel valve.

1 (i) 15mm dia. 184.98 Each

1 (ii) 20mm dia. 201.8 Each

1 (III) 25 MM DIA 416.47 Each

1 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun

flush cock of approved quality including fixing in pipe line etc.

141 1 complete.

1 (i) 20mm dia. 252.26 Each

1 (ii) 25mm dia. 261.16 Each

1 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

etc.complete. (A) White earthen ware flat back or corner

type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe. (A) Squating plate pattern white

earthen ware 550mm x 300mm.

Providing and fixing chromium plated, bottle trap with

144 1 necessary couplings of approved quality for wash basin. 292.87 Each

Providing and fixing ball cock ofapproved quality as

145 1 directed. (A) Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved quality as

146 1 directed. (B)Abonite (i) 25mm dia. 101.89 Each

Filling with good Quality thor as and where directed

by the Architect / Engineer-in-charge, in sunk in layers of

15 cm. thickness, including watering, ramming well etc.

complete, as directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with solvent, including cost

of all materials.adhesive

Providing laying and jointing in true line and level 25 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent

as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 32 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 40 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 50 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing in line level plumb, fabricating and fixing

three row horizontal barbed wire fencing and punched tape

concertina coil of 9 turns per meter of 610 mm dia fixed

with clips on top of the angle iron posts. The punched

tape concertina coil having sharp barbs at every 25 mm

spacing shall be 0.5 mm thick and 19 mm width and

weighting 13 kg/100 mt. (Average) as per manufacture's

specification. The rate shall also include providing

and fixing 1.20 mt.total long MS angle 40 x 40 x 6 mm

@3.00 mt.c/c spacing embaded in RCC column, angle

posts shall be painted with one coats of red oxide and two

coats of enamel paint of approved quality at top compound

Fixing sun film for protection sunlight in black or any colour as

153 1 as directd by engineer In Charge.(Market rate) 850 Smt

Providing & Fixing 3 mm thick F.R.P.sheet of Approved

Quality & Color / Pattern as per Consultant's design also

includes required fabrication structure in the grid of 2'-

0x2'-0 size using hollow pipe of16 gauge & size 2"x1" &

1"x1" ,G.I. & Bitumen Washers, Silicon paste application

for fixing the sheet . Rate also includesnecessary bending,

cutting, labor charges , Zinc Primer coat & Two coats of oil

painting of color as approved by consultants & making

good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S.

155 1 Supporting Brackets. (N.S.) 400 Rmt

Hiring charges for J.C.B.machine inclduing cost of fuel,

operator, dirver etc.. ( 12 hours sift day/night)

To provide tractor with hydraulic trolley, driver, 4 Nos. of

Labor with all tools like bucket drum, showels, trikam,

pavadas, etc,, to carryout different works during

monsoon for 12 Hrs. Shift. Work shall be carried out as

per the instrucitons of Engineer In-Charge.No extra charged

shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain

fixed on window level on wooden batten and curtain

lift with cotton thin rope, make of aerolax or

equivalent design and colour as per instruction by

engineer – in – Charge with necessary hardware fitting,

material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of

159 1 765 number) Hardwire or Everite Prabhat or Equivalent 474.58 No.

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia

M.S. bar bent to shape with hooked ends of R.C.C. slabs

during laying incl. painting the exposed protion of loops, all as

per standard design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

cement mortar 1:1 including neat cement finishing, watering

161 1 etc. complete. 23.45 Rmt

162 1 Making Water connection from exi.Muni. Water line (N.S.) 250 No.

Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams

incl.mixture of CEMSCREED HM (F) fair mate

company material, FBR bonding agent material with

water in suItable proportion anti corrosive treatment on

exposed beam,celling steel bars with safeCore R incl.all

kind of labour etc.comp.including three coat of white

wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or

submarcible water pumps withmotor and required cable and

switch board of approved brand and make etc.comp.as

.Providing TMT Bar FE 415 reinforcement for R.C.C. work

including bending, binding and placing in position complete up

165 1 to floor two level 66.59 Kg.

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in position

complete upto floor two level placing in position complete upto

floor two level placing in position complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC

door shutter (sintex door-equivalent) with necessary

167 1 alluminium fitting with EL-7 section frame 2,867.00 Smt

Conveyance charge of Earth,Lime, Murrum, building rubbish

earch manure or sludge and excavated rock and fly

168 1 ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.) 235.51 Cu.M.

Providing and laying polished granite stone slab 18 mm thick

in risers of steps, dedo and pllars laid on 10 mm thick cement

mortar 1:3 (1 cement:3 coarse sand) and jointed with gray

cement slurry including rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium

framing and making grove as per design and finished with

royal plastic paint as per instruction of engineer incharge.

Providing and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, with both

side 1 mm laminate finishing including anodized

aluminum butt hinges with necessary screws.

Decorative type and pine wood core anodized minimum

3 no 150 mm long aluminum butt hinges in flush door

shutters with 2 no of brass holdfast 325 mm long 1 no

brass tower bolt 250 mm long and two no of 150 mm long

brass door handle . Decorative both side laminated Flush

door 35 mm thick. with frame of 10 cm x 7 cmt Indian

teak wood frame including all necessary fitting

fixtures hardware screw and adhesive etc fixing up to all

lead and lift height up to 45 mtr from GL etc complete as

per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch &

instructionof engineer in charge same as lal darwaja garden

pattern consisting of 3'dia. M.S black pipe 'A' class 5'4" ht.

fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link

jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle

frame 8'x4' size with MS flat of size 25x3 mm welded jali

etc.comp.The jali is to be welded to MS pipe with MS flat as

instruction given.The M.S pipe and the M.S angle frame are to

be painted one coat of primer and two coats of paint as

directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya stone

with well dressed grooveas per directed by engg.in charge for

foundation, plinth or super structure level (above plinth level

upto floor two level) in cement mortar 1:5 (1-cement : 5-fine

sand) incl.pointing the joint with white cement and yellow oxide

powder in proportion to match stone colour the joints should

be thread grooved as per exi. lake stone pitching apperance

(A) stone masonary wall/stone dressed single faced (size

1 (B) stone coping (size 15"x8"x4") 510 Rmt

1 (C) stone coping (size 15"x8"x9") 790 Rmt

1 (D) stone column (size 15"x15") 10,710.00 Cmt

1 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H

Kerb block for Footpath in M-20 grade using 20 mm

nominal size black trap aggregate of Sevaliya/Timbaor

equivalent quality for pre-cast blocks,

reasonablyexposed finish/ formwork , mould

with well equippedwith vibratory system for kerb stones

of approved design including curing, etc. complete,

including thecost of formwork etc. complete. The rate

shall also include necessary cutting of asphalt, fixing

the Kerbstones in line and level on 5 cm thick sand

bedding withnecessary equipments and

materials. The rate shall also include the flush pointing in

CM (1:3) for all joints of thekerbstones. Filling of zari alone the

sides of the kerbstone fixed with Bituminous

concrete Bituminousconcrete / C.C. mixed in proper

position to flush withthe road surface as directed by

Engineer in change to form a portable mixture.a) Laying

on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath,parking areas,

service lanes and other areas as mentioned in the drawing /

instruction of engineer in charge. Cost includes formworks

using rubber mould, Rate providing and laying paver blocks as

per required grading and specification. The paver block shall

be mechanically compacted. The work of paving blocks shall

be executed in line and level by skill mason of flooring work

only. It should be laid in such a way that the no cutting of the

paver block to be necessary. if cutting of paver block

necessary then it should be cut by machine only and carting.

The finished surface of the paver block shall have resonably

good, plain finished. Paver blocks shall be compacted and

shall be relaid if necessary. Gravel or such type of materials

shall not be allowed for production. Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core

construction with frame of first class hard wood with cross

board and face veneer or ply wood face panels, including

anodised alluminium butt hinges with necessary screws. (B)

Non- decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

Labour work for fixing any kind of paving with cement pointing

in CM 1:2, including watering, ramming etc comp. as dir.For

I) Laying on Sand bedding as per requirement to fix the

177 1 C.C.Block / Nibhada Stone in Line & Level 78 Smt

Box type metal letters forming composite box made from 1mm

thick stainless steel plate of grade 304 having brush finish of

following font size to be fixed at Main Gate in english and or

Gujrati and including fixing charges approved before fixing by

clent / consultant.

1 400mm high 1,000.00 Nos.

1 300 mm high 750 Nos.

1 230 mm high 565 Nos.

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS :

and consisting of angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener

mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which

the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at

mm centre to centre, shall be fixed in a direction perpendicular

to G.I. intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl plugs at

mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x

25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with

recomme-nded jointing compound , jointing tapes , finishing

with jointing compound in 3 layers covering upto 150 mm on

both sides of joint and two coats of primer suitable for board,

all as per manufacturer’s specification and also including the

cost of making openings for light fittings, grills, diffusers,

cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the

179 1 Engineer in Charge but excluding the cost of painting. 850 Smt

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow)

350 x 500 x 50 mm, Size per color End Cape 350 MM x

MM x 50 MM TOP DESIGN - Lining Top flat ANTI SKID

PATTERN FOR GRIP COLOUR :- YELLOW & BLACK BODY

MATERIAL :- MODIFIED THERMOPLASTICS (Polymer

Rubberized ) • ECO FRIENDLY RECYCLE RUBBER

Packing :- 4 pcs/ woven Bag Load Capacity :- 20 MT Fitting (

Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX

Bolts with Washer Epoxy for Bolt Fitting etc. complete as

directed by EIC .

Providing and fixing of Roller blind curtain/blackout. The fabric

shall be woven from formulated platisol extruded over a

polyaster yarn.The fabric shouldl be weaved to provide subtle

view of the side of the blind and should offer elimination of

glare and sunlight radiance upto a minimum of 80%.The fabric

shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour false ceiling

with grid type with aluminium frame from gypsteel,

fastners ,props, Finishing as per architectural drawing

allowing openings for A.C. Diffusers,

Light/Electrical Points etc –complete, Prior to fixing on

frame.(Brand : Anutone or equivalent ) (N.S.) or as

directd by engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry chamber

& water tight G.T.Stone including fixing of covervSquare

183 1 mouth trap 100 mm x100 mm size P-Trap 1,263.15 No.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i)Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20)

edge kerb having size of 75 x 300 x 300 mm depth and as per

design conveying it to the site, jointing into C:M 1:3 and

racking out the joints incl. necessary excavation of asphalt, soil

etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and

70 cm high resting on B.B.Masonry walls 23 cm.thick in

C.M.(1:6) with (ii) Fixing black Granitee 30mm thick laid on

precast R.C.C. (1:2:4) slab with plastering on exposed faces of

wall in C.M. (1:4) etc complete

Providing and fixing hard drawn steel wire fabric 75mm x

25mm mesh or weight not less than 7.75 kg. per Sq.M. to

window frames etc. including60 x 20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails &

then application of 15 mm plaster on R.C.C.& masonary joints

191 1 as per dir.of engg.in charge 35 Rmt.

Providing and constructing, Underground (U/G) water tank of

specified capacity, on specified location, for all depths, in

controlled CC of M-200 grade with bottom slab, top slab and

RCC walls, including cost of form work and reinforcement,with

inside and outside plaster in CM 1 :3 and water proofing

treatment as per IWP specification,including injection,

grouting, etc. complete. The rate includes for providing and

fixing two nos. 0.6m. x 0.6 m. size medium duty CI manhole

cover/s at top, including wash out pipe line and inlet and outlet

connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling with

grid type with alluminium frame consisting of 600mm x 600mm

3mm thick plain PVC sheet used as panel insert in a frame

work made using anodized alluminium T section of size 1 x

(235 x 25mm, 19 gauge or 1 mm thick) in square pattern of

grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work

is supported from the cceiling with the help of G.I. hook and

G.I. wire/6mm M.S. rods of required sizes to maintain proper

level etc. The aluminium frame work is supported on side wall

with the use of alluminium L section of size 1 x1 (25 x 25mm)

angles etc. complete as per direction of Engineer in charge.

Manufactures specification and drawing.

Providing and supplying of labour for necessary manual

excavation, cleaning, Shifting of Material Or any other, or for

any other work as directed by Engineer In charge. The Rate

includes Handcart with Mazdoor 551 No

10 Mukadam/supervisior/karigar 425 No

2 Fitter/Plumber/Mason 697 No

0 WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter including cost of

welding rods/gas, Transportation, including carting from site to

195 0 work place. 1500 No

5 Mazdoor at Day Female 450 No's

1 Mazdoor at Day Male 493 No's

Supplying electric breaker machine for RCC slab or asphalt

demolishing work on site by using operator, fuel, power supply

etc.complete as directed. (no payment should be allowed for

non working condition of machinery and for pipe line

excavation and M.H. work. Allowed only for break down work)

(Based on Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

Nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.

1 15 MM DIA 165.21 Rmt

1 20 MM DIA 202.97 Rmt

1 25 MM DIA 247.25 Rmt

1 32 MM DIA 330.36 Rmt

1 40 MM DIA 437.66 Rmt

1 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame

for Gulley trap (Standard pattern) te weight of cover to be not

198 1 less 4.53 Kg.) 491.8 Each

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out

side Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including

making good the wall ceiling and floor.

(in words also)

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

South West Zone Office, Late Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club,

S.G. highway, Jodhpur, Ahmedabad-380015.

Municipal Commissioner invites Percentage Rate sealed tenders from interested

1 Name of work Require Repairing Work of different municipal buildings

in sarkhej ward of south west zone

2 Time Limit 12 Months (Excluding Monsoon Period)

3 Eligibility Criteria Register “E-2” class in PWD in Govt. R&B/CPWD/AMC or equivalent

registration with any other state Govt. or institutions.

4 Estimated Cost put to tender Rs.

5 Earnest Money Deposit Rs. 9999.00 (Demand Draft, Pay order, Bank Guarantee (As per finanance

circular No 56) or Cheque in favour of Municipal Commissioner,

Ahmedabad) To be submitted as prescribed in 7.0 below. Demand Draft

or Bank Guarantee shall be from Nationalized Bank and valid for 120 days.

6 (A) Security Deposit: 5% of Tender Amount

(B) Retention 1. @ 2% of the value of work done will be deducted from each RA bill. It

will be released along with release of payment of Final Bill.

7 Tender fees Rs.900/-Demand Draft / Pay order in favour of Municipal Commissioner,

(Non refundable) Ahmedabad)

8 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with

Tender Fees Tender as described in the invitation of tender and submitted to Assistant

Manager (South West zone) , Ahmedabad Municipal Corporation, Late

Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club,

S.G. highway, Jodhpur, Ahmedabad-380015

9 Tenders issue date Tenders from the website http://amc.nprocure.com and

http://nprocure.com. shall be down loaded from

10 Last date of receiving Dt.02.03.2026 up to 18:00 Hrs The tenders received after this date

Tenders. and time will not be entertained under any circumstances.

11 Date of Opening Dt.03.03.2026 at 17.00 Hrs to Assistant Manager "South west Zone

Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club,

S.G. highway, Jodhpur, Ahmedabad-380015

12 Mode of sending the Tender Document shall be submitted in sealed envelope systems By RPAD/ Speed

Documents post/ Hand Delivery/ Courier in sealed covers as described in submission

13 Terms, Condition, & All general condition of contract of Form B1 condition of contract shall be

Specification applicable.

14 GST ltKtk Ftðþ vhevºt lkch - 31, yb>tJt> BGþrlrm5j ftuvtuohNl btk Ítulj ytuVem / v.J.yu. / «tusu¾x rJCtd îtht htuz /

<t.07-07-2017 Bþsc rcÕz´d/jtEx/c{es Ft<tytu îtht cnth vtzJtbtk ytJujt xuLzh suLþk mcbeNl <t.01-07-

2017 vAe fhJtLþk &tg Au, <uJt <btb xuLzhtubtk <&t nJu vAe cnth vtzJtbtk ytJlth

Wvhtuf< rJCtd/Ft<tltk <btb xuLzhtubtk (bxehegj + juch mÃjtg mt&u) GSTlt

ltuxeVefuNl Bþsc GST sgtk jtøþ vz<tu ntug ðgtk, m>hnwk ftblt Bidder yu GST

ltuxeVefuNl Bþscle yuÃjefucejexe ægtlbtk htFelu huxLþk cez´d fhJtLþk hnuNu.

Conditional tenders will not be accepted. Municipal Commissioner reserves the rights to reject any or all the tenders

without assigning any reasons thereof.

Seal and Signature of the Bidder Addl. City Engineer

(South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

Invitation for Bid (IFB)

1. The AHMEDABAD MUNICIPAL CORPORATION, (Hereinafter called “the Employer”) invites sealed

Tender document from reputed and qualified bidders for the construction of Works detailed in the

Sr. Name of Works Approximate value Bid Security Completion

No. of works (Rs.) (Rs.) Period

1 Require Repairing Work of Rs.999899.00 Rs.9999.00 12 Months

different municipal buildings in (Excluding

sarkhej ward of south west zone Monsoon

2. Tender (a complete set of bidding document) fee shall be Rs. 900/- in the form of Demand Draft /

Pay Order from any Nationalized Bank in favor of MUNICIPAL COMMISSIONER, Ahmedabad, payable

at Ahmedabad, which shall be non refundable. The fees shall be paid at the time of submitting the

3. Interested bidders shall download the tender documents from website http://amc.nprocure.com

and http://nprocure.com. up to Dt. 02.03.2026 at 18:00 hrs tender fee as mentioned in clause

above shall be paid by the bidder at the time of bid submission.

4. All bids must be accompanied by Bid Security of the amount specified for the Works in the above

Table payable at Ahmedabad and drawn in favor of AHMEDABAD MUNICIPAL CORPORATION,

Ahmedabad. Bid Security will have to be in any one of the forms as specified in Clause of ITB

(Instructions to Bidders).

All Bids must be delivered to Assistant Manager "South West Zone, Zonal Office", Late Shree Tushar

Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G. highway, Jodhpur, Ahmedabad-380015.

Seal and Signature of the Bidder Addl. City Engineer

(South West Zone)

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

SOUTH WEST ZONE

DETAILS OF BANK ACCOUT

1 Contractor's name

3 Telephone/ mobile no.

4 Permanent account no. (PAN

5 Name of the bank

6 Branch name and address

11 Contractor/ supplier's

signature and stamp

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

1. Contractor shall produce the relevant registration certificate of AMC / State Govt /Central Govt.

2. Contractor shall register the work to labour commissioner as per labour act.

3. Contractor shall not sub-let the work without permission of the authority

4. Contractor should have sufficient skilled and unskilled laborers so that he shall start work at different

sites simultaneously. Contractor's having labour force available during festivals shall only apply.

Contractor can not stop the work due to on availably of labour force. In case progress is delayed,

contractor shall be penalized 0.1% of Tender amount per day for work done after time limit, maximum

up to 10% for remaining work.

5. Bitumen rate difference will be paid as per tender conditions, if applicable.

6. Advance payment / machinery advance will not be paid.

7. Payment of running bill will be made as per recent A.M.C. policy in force.

8. No extra payment will be made due to increase of central / state Govt. Taxes. Exluding GST as per As per

circular no 38 Date 21.11.2022of finance department of Ahmedabad Municipal Corporation

9. If the work is not completed within time limit the penalty will be recovered from immediate bills of

10. If the material i.e. MH cover C.C block etc. supplied from Municipal Corporation store then contractor

shall not claim for any extra rate for non execution of such item, partly/fully.

11. In the specifications, "as directed"/"Approved" shall be taken to mean, "as directed"/approved" by the

Engineer-in-charge.

12. Wherever a reference to any Indian Standard appears in the specifications, it shall be taken to mean as

a reference to the latest edition of the same in force on the date of agreement.

13. In "Mode of Measurement" in the specifications wherever a dispute arises in the absence of specific

mention of a particular point or aspect, the provisions on these particular points, or aspects in the

relevant Indian Standards shall be referred to.

14. All measurements and computations, unless otherwise specified, shall be carried out nearest to the

following limits:

(i) Length, width and depth (height)------- 0.01 Meter.

(ii) Areas -----0.01 Sq. Mt.

(iii) Cubic Contents ------0.01 Cu.Mt.

15. The distance, which constitutes lead, shall be determined along the shortest practical route and not

necessarily the route actually taken. The decision of the Engineer-in-charge in this regard shall be taken

16. Where no lead is specified, it shall mean "all leads"

17. Lift shall be measured from plinth level.

18. Definite particulars covered in the items of work, through not mentioned or elucidated in it,

specifications shall be deemed to be included there in.

19. Reference to specifications of materials as made in the detailed specification of the items of work is in

the form of a designation containing the number of the specification of the material and prefix 'M' e.g.

20. Approval to the samples of various materials given by the Engineer-in-charge shall not absolve the

contractor from the responsibility of replacing defective material brought on site or materials used in

the work found defective at a later date.

21. The contract rate of the item of work shall be for the work completed in all respects.

22. No collection of materials shall be made before it is got approved from the Engineer-in-charge.

23. Collection of approved materials shall be done at site of work in a systematic manner. Materials shall be

stone at site of work in a systematic manner. Materials shall be stored in such a manner as to prevent

damage, deterioration or intrusion of foreign matter and to-ensure the preservation of their quality and

fitness for the work.

24. Materials, if and when rejected by the Engineer-in-charge, shall be immediately removed from the site

of work within 24 hours.

25. No materials shall be stored prior to, during and after execution shall be kept in sufficient numbers and

in good working condition on the site of the work.

26. All works shall be carried out in workmanlike manners per the best techniques for the particular item.

27. All tools, templates, machinery and equipment for correct execution of the work as well as for checking

lines, levels, alignment of the works during execution shall be kept in sufficient numbers and in good

working condition on the site of the work.

28. The mode, procedure and manner of execution shall be such that it does not cause damage or over

loading of the various components of the structure during execution or after completion of the

29. All necessary safety measures and precaution (including those laid down in the various relevant Indian

Standards) shall be taken to ensure the safety of men, materials and machinery on the works as also of

the work itself.

30. The testing charges of all materials shall be borne by the Contractor unless recovery at one percent

towards testing charges is separately made.

INSTRUCTION TO TENDERERS

TENDER VALIDITY PERIOD:

The tender shall be kept valid for acceptance for a period of One Hundred Twenty Calendar days (120)

from opening of price bids.

SECURITY DEPOSIT

Within 10 days of receipt of Acceptance from the Corporation, the successful tender shall furnish to the

Corporation Security Deposit of 5% (five percent) of the contract price cheque or Bank Guarantee, pay

order, or demand draft of Nationalized Banks and Schedule Banks only.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be 12 Month (Excluding Monsoon Period) after the order to start the works. Progress

of work should be in proportion to time limit.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The contractor

shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic. He shall be responsible

for any damage to public. If any incident happen, during the execution of work. In case of dispute for unseen or

overlooked items the decision of the Dy. City Engineer shall be final. The contractor shall have to give site clean of all

rubbish during the work and at the time of completion of work and hand over the site with final finishing of the work

as directed. All the rejected materials shall be removed from site within 24 hours by contractor at this risk and cost.

Debris shall have to cart daily from site.

If any extra item crops up during the progress of work the same shall be carried out by the contractor and he shall be

paid at the rate fixed by Add.C.E. as per the rate analysis based on latest SOR or if item is not available in SOR than

based on current market rates. In case of extra item decision of Add. City Engg. shall remain final regarding rate.

If in the interest of the Corporation it is necessary to change either any site or the design of the propose work the

contractor shall carry out the same at his quoted rates without charges any extra and the contractor will have to

carry out the works and he will be paid at the rate quoted by him. No claim for extra rate for subsequent changes in

site and design is entertained.

Octroi exemption passes shall not be given for any materials required for the work. Contractor will be fully

responsible for compliance of the various provisions under contract Act. 1970 and the Rules framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of the tenders for this

work and that the tenderer shall not be allowed to withdraw on modify the offer on his own during the period. If any

tenderer withdraw or makes any modifications or addition in the terms and conditions of his tender not acceptable

to the Municipal Corporation the Municipal Corporation shall without prejudice to any right or remedy be at liberty

to forfeit in full the said earnest money and black list the contractor.

If the work is not carried out within the specified time limit. from the date of order to start the work the penalty of

Rs.- ( As per Form - B1) per day of delay shall be recovered from the immediate bills payable to the contractor.

Contractor has to make his own arrangement for procurement of steel and cement.

Contractors should note the following conditions carefully:-

i) Conditional tender shall not be accepted.

ii) All tenders are to be submitted in duplicate without which the tenders are liable to be rejected.

iii) In case of tender downloaded from website, tender fee & EMD should be submitted in form of demand draft or

iv) Condition of Form - B1 Standard Specification of material & code of practice will be applicable. Form B1 can be

is available in website. Specification shall be as per ' R& B Dept. - Govt. of Gujarat booklets of Building Works &

and Road Works Specifications published by Gujarat Book Depot, Sector-21. Gandhinagar.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

SPECIFICATIONS OF MATERIALS – CIVIL

This section gives detail specifications for mainly used materials, for other materials refer Building Specifications.

For materials relevant specification of Building Specification shall apply.

TECHNICAL SPECIFICATIONS

NAME OF THE WORK:- Require Repairing Work of different municipal buildings in sarkhej

ward of south west zone

Item No.1 : Excavation for foundation up to1.5 m depth including sorting out and stacking of useful materials

and disposing of theexcavated stuff upto 50 Meter lead.(A) Loose or soft soil (R & B S.O.R 2023-24 I.no.

Item Code 04001A), Upto 1.5 mt Depth, 1.5 to 3.0 mt.depth

Excavation for foundation up to1.5 m depth including sorting out and stacking of useful

materials and disposing of theexcavated stuff upto 50 Meter lead.(A) Loose or soft soil (R & B

S.O.R 2023-24 I.no. Item Code 04001A), Upto 1.5 mt Depth, 1.5 to 3.0 mt.depth

Item No.2: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidation each deposited layer by ramming and

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidation each deposited layer by ramming and

Item No.3 Providing and laying cement concrete1:5:10 (1-Cement: 5- coarses sand and:10-hand

broken stone aggregates 40mm nominal size) and curing complete excluding cost of

formworkin (A) Foundation and Plinth.

Providing and laying cement concrete1:5:10 (1-Cement: 5- coarses sand and:10-hand

broken stone aggregates 40mm nominal size) and curing complete excluding cost of

formworkin (A) Foundation and Plinth.

Item No.4 (A) wall caps/coping

(A) wall caps/coping

Item No.5 Providing and laying cement concrete1:3:6 (1-Cement: 3- coarses sand and:6-hand broken

stone aggregates 40mm nominal size) and curing complete excluding cost of formworkin

(A) Foundation and Plinth.

Providing and laying cement concrete1:3:6 (1-Cement: 3- coarses sand and:6-hand broken

stone aggregates 40mm nominal size) and curing complete excluding cost of formworkin (A)

Foundation and Plinth.

Item No.6 Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse sand:6-crushed stone

aggregates 20mm nominal size) and curing complete including cost of formwork in (A) wall

Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse sand:6-crushed stone

aggregates 20mm nominal size) and curing complete including cost of formwork in (A) wall

Item No.7 Providing and laying cement concrete work 1:2:4 ((1-Cement:2- coarse sand:4-graded

aggregates 20mm nominal size) curing complete excluding cost of formwork and

reinforcement.Foundations, footings, base or columns and mass concrete,Slabs, landing, shelves,

balconies, lintels, beams, girders and cantilivers upto floor two level,Independent piers,

columns, and pillars, upto floor two level

Providing and laying cement concrete work 1:2:4 ((1-Cement:2- coarse sand:4-graded

aggregates 20mm nominal size) curing complete excluding cost of formwork and

reinforcement.Foundations, footings, base or columns and mass concrete,Slabs, landing, shelves,

balconies, lintels, beams, girders and cantilivers upto floor two level,Independent piers,

columns, and pillars, upto floor two level

Item No.8 Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates

mm nominal size) for reinforced concrete chhajjas not exceeding 10 cm. thickness upto

floors two level including finishing the exposed surfaces with cement mortar 1:3 (1

cement : 3 find sand) to give a smooth and even surface centering and form work and curing

complete excluding cost of reinforcement.

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates

mm nominal size) for reinforced concrete chhajjas not exceeding 10 cm. thickness upto

floors two level including finishing the exposed surfaces with cement mortar 1:3 (1 cement

: 3 find sand) to give a smooth and even surface centering and form work and curing complete

excluding cost of reinforcement.

Item No.9 Providing and laying controlled cement concrete / Ready Mix Concrete of M-200 and

curing complete, excluding the cost of form work and reinforcement for reinforced concrete

work in:Foundations, footings, base of columns, and mass concrete.Walls from top of

foundations /level up to floor Two level.,Slabs,landing,shelves,Balconies Lintels, Beams, Girders and

Cantilever upto floor,Columns, pillars, posts, and struts, up to floor two level.,Staircase up to floor

two level. (excluding landing),Vertical and horizontal fins up to floor two level.

Providing and laying controlled cement concrete / Ready Mix Concrete of M-200 and curing

complete, excluding the cost of form work and reinforcement for reinforced concrete work

in:Foundations, footings, base of columns, and mass concrete.Walls from top of foundations /level

up to floor Two level.,Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto

floor,Columns, pillars, posts, and struts, up to floor two level.,Staircase up to floor two level.

(excluding landing),Vertical and horizontal fins up to floor two level.

Item No.10 Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-coarsesand: 4-graded

stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete including

the cost of form work but excluding the cost of reinforsement for R.C.C work in (iv) Slabs having

more than 13 cm and upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-coarsesand: 4-graded

stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete including the

cost of form work but excluding the cost of reinforsement for R.C.C work in (iv) Slabs having more

than 13 cm and upto 15 cm.thickness

Item No.11 Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-coarsesand: 4-graded

stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete including

the cost of form work but excluding the cost of reinforsement for R.C.C work in (iv) Slabs having

more than 8 cm and upto 10 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-coarsesand: 4-graded

stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete including the

cost of form work but excluding the cost of reinforsement for R.C.C work in (iv) Slabs having more

than 8 cm and upto 10 cm.thickness

Item No.12 Brick work using common burnt clay building bricks having crushing strength not less

than 35kg./Sq.Cm.in foundation and plinth in Cement Mortar1:6 (1-Cement :6 - fine

(A) Conventional (upto 10 ton)

Brick work using common burnt clay building bricks having crushing strength not less

than 35kg./Sq.Cm.in foundation and plinth in Cement Mortar1:6 (1-Cement :6 - fine sand)

(A) Conventional (upto 10 ton)

Item No.13 Extra Rate for brickwork in Above Item for super structure above plinth level upto floor two

level (B) Conventional(A) Conventional B) ModularC) above floor two level Item No. 2(6.13) (A)

Modular,D) above floor two level Item No. 2(6.13) (B) Conventional

Extra Rate for brickwork in Above Item for super structure above plinth level upto floor two

level (B) Conventional(A) Conventional B) ModularC) above floor two level Item No. 2(6.13) (A)

Modular,D) above floor two level Item No. 2(6.13) (B) Conventional

Item No.14 Half brick masonry in common brunt clay building bricks having crushing strength not less than

35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in foundation and

Plinth conventional brickwork

Half brick masonry in common brunt clay building bricks having crushing strength not less than

35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in foundation and

Plinth conventional brickwork

Item No.15 Extra for half brick masonry in super structure above plinth level upto floor two level

(B) conventional

Extra for half brick masonry in super structure above plinth level upto floor two level

(B) conventional

Item No.16 Providing form work in ordinary timber planking so as to give a rough finish including

centering, shuttering, strutting and propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of the same for in situ reinforced or

plain concrete work upto floor four level,Foundation, footings, bases of columns etc. and mass

concrete., (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors

etc. upto 200 mm in thickness., (B) Flat surfaces such as soffits of suspended floor roof slabs Landings

and the like. (2) Floors etc. above 200mm in thickness.,Vertical surface such as walls (any thickness)

partitions and the like including attached buttresses & string course & the like., (ii) Sides And

Soffits Of Beam, Haunchings Cantilevers, Girders, Bressumers And Lintels Not Exceeding

M In Depth. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.(2) Circular

or curved in plan.(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders Bressumers

and Lintels exceeding 1M.in Depth.

Providing form work in ordinary timber planking so as to give a rough finish including

centering, shuttering, strutting and propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of the same for in situ reinforced or

plain concrete work upto floor four level,Foundation, footings, bases of columns etc. and mass

concrete., (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc.

upto 200 mm in thickness., (B) Flat surfaces such as soffits of suspended floor roof slabs Landings and

the like. (2) Floors etc. above 200mm in thickness.,Vertical surface such as walls (any thickness)

partitions and the like including attached buttresses & string course & the like., (ii) Sides And Soffits

Of Beam, Haunchings Cantilevers, Girders, Bressumers And Lintels Not Exceeding 1 M In

Depth. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.(2) Circular or

curved in plan.(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders Bressumers and

Lintels exceeding 1M.in Depth.

Item No.17 Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for Doors

windows and clear story windows including anodised alluminium But hinges with necessary

screws and indian teak wood shutters with.(A) Plywood sheet panels. (B) Particle board panels

(C)Hard board panels. (D) Asbestos sheet panels.

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for Doors

windows and clear story windows including anodised alluminium But hinges with necessary

screws and indian teak wood shutters with.(A) Plywood sheet panels. (B) Particle board panels (C)Hard

board panels. (D) Asbestos sheet panels.

Item No.18 Providing and fixing 25 mm thick shutters for cup boards etc. including black enamelled

M.S. butt hinges with necessary screws.(A) Indian teak wood. (i) Fully Panelled.,Providing and

fixing 25 mm thick shutters for cupboards etc. including anodised alluminiu butt hinges with

necessary screws. (A) Indian teak wood. (ii) Fully Glazed.,Providing and fixing 25 mm thick shutters for

cupboards etc. including anodised alluminiu butt hinges with necessary screws. (A) Indian teak wood.

(ii) Partly panelled and partl glazed.

Providing and fixing 25 mm thick shutters for cup boards etc. including black enamelled

M.S. butt hinges with necessary screws.(A) Indian teak wood. (i) Fully Panelled.,Providing and

fixing 25 mm thick shutters for cupboards etc. including anodised alluminiu butt hinges with necessary

screws. (A) Indian teak wood. (ii) Fully Glazed.,Providing and fixing 25 mm thick shutters for cupboards

etc. including anodised alluminiu butt hinges with necessary screws. (A) Indian teak wood. (ii) Partly

panelled and partl glazed.

Item No.19 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S.

flats at required spacings and frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S.

flats at required spacings and frame alround, square or round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

Item No.20 Providing and fixing glazed louvered glass windows and ventilators with teak wood

frame 10 cm. x 7 cm. size including 3 coats of oil painting to wood work etc.complete.

Providing and fixing glazed louvered glass windows and ventilators with teak wood

frame 10 cm. x 7 cm. size including 3 coats of oil painting to wood work etc.complete.

Item No.21 Providing and fixing glazed louvered glass windows and ventilators with teak wood

frame 10 cm.x7 cm. size including 3 coats of oil painting to wood work etc.complete.with

wooden louvers plank 12mm thick

Providing and fixing glazed louvered glass windows and ventilators with teak wood

frame 10 cm.x7 cm. size including 3 coats of oil painting to wood work etc.complete.with

wooden louvers plank 12mm thick

Item No.22 Providing and fixing 35 mm thick shutters for Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures

and fastenings including primer coat of approved quality and two coats of oil painting etc,

complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and

fastenings including primer coat of approved quality and two coats of oil painting etc, complete.(ii)

Item No.23 Providing and fixing 35 mm thick shutters for Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm. size including black enamelled iron oxidixed

fixtures and fastenings including primer coat of approved quality and two coats of oil painting

etc, complete.(ii) Fully Panelled."Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil

painting etc, complete. (iii) Partly panelled and partly glazed.

Providing and fixing 35 mm thick shutters for Doors, windows and clere story windows

including Indian teak wood frames 10 cm x 7 cm. size including black enamelled iron oxidixed

fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc,

complete.(ii) Fully Panelled."Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium

fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc,

complete. (iii) Partly panelled and partly glazed.

Item No.24 Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER consisting

of frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for stiles and

mm x 15 mm for top and bottom rails.M.S. frames hall have a coat of steel primers of approved

make and manufacture, M.S. frames Shall be covered with 5 mm thick heat moulded PVC ‘C’

channel of size 30 x 50 mm formings tiles, and 5 mm thick 75 mm wide PVC sheets for to prail,

lock rail and bottom rail on either side, and 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet

as gap insert for top rail and bottom rail, Panelling of 5 stiles and rails with 30 mm wide x 5 mm

thick PVC sheet beading on eighter side, and joined together with solventcement adhesive,.

An additional 5 mm thick PVC strip of 20 mm width is to be stculkon the interiors side of the ‘c’

channel using PVC solvent cement adhesive etc. complete as per direction of Engineer

incharge, manufacture’s specification and drawing.

Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER consisting of

frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for stiles and 15 mm x

15 mm for top and bottom rails.M.S. frames hall have a coat of steel primers of approved make

and manufacture, M.S. frames Shall be covered with 5 mm thick heat moulded PVC ‘C’ channel of

size 30 x 50 mm formings tiles, and 5 mm thick 75 mm wide PVC sheets for to prail, lock rail and

bottom rail on either side, and 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet as gap insert

for top rail and bottom rail, Panelling of 5 stiles and rails with 30 mm wide x 5 mm thick PVC sheet

beading on eighter side, and joined together with solventcement adhesive,. An additional 5 mm

thick PVC strip of 20 mm width is to be stculkon the interiors side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per direction of Engineer incharge, manufacture’s

specification and drawing.

Item No.25 Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x

2 mm braced with flat iron diagonal 20 x 5 mm size with top and bottom rails T iron 40 x 40 x

mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers,

handles, including a priming coat of red lead paint & approved make.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x

mm braced with flat iron diagonal 20 x 5 mm size with top and bottom rails T iron 40 x 40 x 6 mm

with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles,

including a priming coat of red lead paint & approved make.

Item No.26 Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and diagonal braces

of 40x40x6 mm angle iron, 3.15 mm M.S.gusset plates at Junctions and corners 25 mm dia.

pulley, 40x40x6 mm angle and T-iron guide rail at top and bottom respactively with

handles, stoppers and locking agangement etc, including applying a priming coat of red lead

Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and diagonal braces

of 40x40x6 mm angle iron, 3.15 mm M.S.gusset plates at Junctions and corners 25 mm dia.

pulley, 40x40x6 mm angle and T-iron guide rail at top and bottom respactively with

handles, stoppers and locking agangement etc, including applying a priming coat of red lead

Item No.27 Providing & Fixing in position Alluminium doors with frame using approved quality

anodised extruded alluminium section as approved by Engg.in charge(Jindal

alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45 mm

at (1.37kg/mt) Shutter middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing & installing

mm thick approved color Acrylic sheet of standard quality fixed with glazing chips on upper

pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of

engg.in charge.(N.S.)

Providing & Fixing in position Alluminium doors with frame using approved quality anodised

extruded alluminium section as approved by Engg.in charge(Jindal alluminium) (a) Frame

sections 101.6x44.45 mm (b) Shutter bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at

1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45 mm at (1.37kg/mt) Shutter middle

section at 100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved color

Acrylic sheet of standard quality fixed with glazing chips on upper pannel & Laminated sheet on

lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Item No.28 Providing and fixing extruded aluminum window having extruded aluminum Colour r Powder Coated

section frame main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm

x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Providing and fixing extruded aluminum window having extruded aluminum Colour r Powder Coated

section frame main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm

x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Item No.29 Providing & Fixing in position Alluminium vents with frame using approved anodised

extruded alluminium section as approved by Engg. In charge.(Jindal alluminium) units

equivalent Approved Rate)Frame section of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing

& Installing 5 mmthick approved color Acrylic sheet of standard quality etc. comp.

Providing & Fixing in position Alluminium vents with frame using approved anodised extruded

alluminium section as approved by Engg. In charge.(Jindal alluminium) units equivalent

Approved Rate)Frame section of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing

5 mmthick approved color Acrylic sheet of standard quality etc. comp.

Item No.30 Providing and fixing standared extruded of alluminium section of size 63 mmx38.10

mmx1.2 mm (Jindal Section:2434, or equivalent @ Wt.0.643 Kg/mt) with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for

Providing and fixing standared extruded of alluminium section of size 63 mmx38.10 mmx1.2

mm (Jindal Section:2434, or equivalent @ Wt.0.643 Kg/mt) with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation

Item No.31 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc complete for Fix Partition

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent bronze colour

tinted float glass as details etc complete for Fix Partition

Item No.32 Providing and laying 40 mm thick marble chips flooring rubbed and polished (I.E.terrazo) to

granolithic finish with under layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-coarse sand: 4-

graded stone aggregate 10 mm and down gauge) and to player 10 mm thick with white, black

or white and blak marble cihps of required sizes from 1 mm to 4 mm nominal size laid in cement

marble powder mix 3:1 (3- Cement:1-Marble powder by weight) in proportion of 4:7 (4-

Cement: 7-marble chips by volume) (C) Medium Shade pigment with approx 50%

white cement and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying 40 mm thick marble chips flooring rubbed and polished (I.E.terrazo) to

granolithic finish with under layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-coarse sand: 4-

graded stone aggregate 10 mm and down gauge) and to player 10 mm thick with white, black or

white and blak marble cihps of required sizes from 1 mm to 4 mm nominal size laid in cement marble

powder mix 3:1 (3- Cement:1-Marble powder by weight) in proportion of 4:7 (4- Cement:

7-marble chips by volume) (C) Medium Shade pigment with approx 50% white cement

and 50% ordinary cement (In top layer only) (upto 10 ton)

Item No.33 Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and polished to Granolithic

finish to player 6 mm white, black or white and black marble chips of size from smallest to

mm nominal size laid in cement marble powder mix 3:1 (3-Cement: 1 marble powder by

weight) in proportion of 4:7 (4-cement marble powder mix: 7-marble chips by volume) (B) Light shade

pigment with white cement (In top layer only)

Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and polished to Granolithic

finish to player 6 mm white, black or white and black marble chips of size from smallest to

mm nominal size laid in cement marble powder mix 3:1 (3-Cement: 1 marble powder by weight)

in proportion of 4:7 (4-cement marble powder mix: 7-marble chips by volume) (B) Light shade pigment

with white cement (In top layer only)

Item No.34 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

Item No.35 Providing and laying Ceramic tiles 6 mm thick in flooring treads of steps and landing laid on a bed

of 12 mm thick cement mortar 1:3 (1- cement :3-coarses and) finishing with flush pointing in white

Providing and laying Ceramic tiles 6 mm thick in flooring treads of steps and landing laid on a bed of

12 mm thick cement mortar 1:3 (1- cement :3-coarses and) finishing with flush pointing in white

Item No.36 Providing & Fixing 20 mm thick Mirror Polished Decorative Granite Board with Computerised

Golden Letters Discription as per instructions of engg. in charge to M.S. frame

structure for Inaugaration & Public Handover Function (N.S.)

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite Board with Computerised

Golden Letters Discription as per instructions of engg. in charge to M.S. frame

structure for Inaugaration & Public Handover Function (N.S.)

Item No.37 Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring treads of steps and landing

laid on a bed of 12 mm thick cement mortar 1:3 (1-cement:3-coarses and) finishing with

flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring treads of steps and landing laid

on a bed of 12 mm thick cement mortar 1:3 (1-cement:3-coarses and) finishing with flush

pointing inwhite cement.

Item No.38 Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting risers of steps and dedo on

mm thick cement plaster 1:3 (1- cement: 3-coarse sand) and jointed with white

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting risers of steps and dedo on

mm thick cement plaster 1:3 (1- cement: 3-coarse sand) and jointed with white cement

Item No.39 Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1-cement:3- coarse sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1-cement:3- coarse sand) and jointed with white cement slurry

Item No.40 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush

pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush pointing

in white cement.

Item No.41 Providing and laying 24" x 24" vitrified 8 to 10 mm th.Double Charged Gloosy / Matt

tiles of Approved make as Approved by Adl.C.E. / Consultants for upto 10 cm high skirting as

approved by Engineer in charge over 10 mm thick cement mortar 1:6 (1 cement : 6 coarse

sand)on new surface& jointed with colour cement slurry incl with flush pointing & cleaning the

surface etc. comp.

Providing and laying 24" x 24" vitrified 8 to 10 mm th.Double Charged Gloosy / Matt tiles

of Approved make as Approved by Adl.C.E. / Consultants for upto 10 cm high skirting as approved

by Engineer in charge over 10 mm thick cement mortar 1:6 (1 cement : 6 coarse sand)on new

surface& jointed with colour cement slurry incl with flush pointing & cleaning the surface etc.

Item No.42 Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and)

laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25 mm thick

Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and)

laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25 mm thick

Item No.43 Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray

cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick

Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement

slurry including rubbing and polishing complete. (A) Marble slab 25mm thick

Item No.44 Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid over and jointed with grey

cement slurry including rubbing and polishing etc.complete. (B) 30 mm thick

Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base of

cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid over and jointed with grey

cement slurry including rubbing and polishing etc.complete. (B) 30 mm thick

Item No.45 Providing and laying polished kota stone slab 25 mm thick in risers of steps, skirting Dedo and pillars

laid on 10 mm thick cement mortar 1:3 (1-Cement :3 coarses and) and jointed with gray

cement slury mixed with pigment to match the shade of slab including rubbing and polishing

Providing and laying polished kota stone slab 25 mm thick in risers of steps, skirting Dedo and pillars laid

on 10 mm thick cement mortar 1:3 (1-Cement :3 coarses and) and jointed with gray cement

slury mixed with pigment to match the shade of slab including rubbing and polishing

Item No.46 Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarses and:4-graded

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat

cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarses and:4-graded

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat

cement. (A) 40mm thick.

Item No.47 Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarse sand:4-graded

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat

cement. (B) 50mm thick.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarse sand:4-graded

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat

cement. (B) 50mm thick.

Item No.48 Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement including rounding off junctions and

extending them up to15 cm along the wall, clearing with water and oxalic acid etc.as

Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including rounding off junctions and extending

them up to15 cm along the wall, clearing with water and oxalic acid etc.as directed.

Item No.49 Providing and laying coloured glazed tiles of the size 300 mmx200 mmx8 mm/300

mmx450 mmx8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1cement: 3 coarse sand) & jointed with white cement slurry.

Providing and laying coloured glazed tiles of the size 300 mmx200 mmx8 mm/300

mmx450 mmx8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1cement: 3 coarse sand) & jointed with white cement slurry.

Item No.50 Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I. J or L Hooks

and nuts 8 mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick sheet.

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I. J or L Hooks

and nuts 8 mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick sheet.

Item No.51 Providing and fixing 150 mm wide 450 mm over all semi circular plain G.I.sheet class-3 gutter with

Iron brackets 40 mmx3 mm size Bolts, Nuts, washers etc. including making necessary

connection with rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing 150 mm wide 450 mm over all semi circular plain G.I.sheet class-3 gutter with

Iron brackets 40 mmx3 mm size Bolts, Nuts, washers etc. including making necessary connection

with rain water pipes. (i) 0.80 mm thick Sheet.

Item No.52 Providing and fixing five courses water profing treatment with bitumen felt consisting of

second and fourth course of blown/ bitumen or/and residual bitumen applied hot at

kg.per Sq.M.of area for each course and first course with fibre base bitunen saturated

under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final

course of stone grit 6 mm and down size or pea sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding grading complete.

Providing and fixing five courses water profing treatment with bitumen felt consisting of

second and fourth course of blown/ bitumen or/and residual bitumen applied hot at

kg.per Sq.M.of area for each course and first course with fibre base bitunen saturated under

lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course of

stone grit 6 mm and down size or pea sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding grading complete.

Item No.53 Providing and fixing on wall face C.I. Rain water pipe including filling the joints with spun yarn

soaked in neat cement slurry and cement mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm

Providing and fixing on wall face C.I. Rain water pipe including filling the joints with spun yarn soaked

in neat cement slurry and cement mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm dia.

Item No.54 Providing 15 mm thick cement plaster in single coat on Rough (Similar) side of single or half

brick walls for interior plastering up to floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement :3-sand)

Providing 15 mm thick cement plaster in single coat on Rough (Similar) side of single or half brick

walls for interior plastering up to floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement :3-sand)

Item No.55 Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

Item No.56 Colour washing with lime on wall surface (two coats) over and including a primary coat of

white washing to give an even shade after through brooming the surface to remove all dirt,

dust, mortar drops and other foreigh matter.

Colour washing with lime on wall surface (two coats) over and including a primary coat of

white washing to give an even shade after through brooming the surface to remove all dirt, dust,

mortar drops and other foreigh matter.

Item No.57 Removing dry or oil bound distemper by a washing and scraping and sand papering

the wall surface smooth including necessary repairs to scratches complete.

Removing dry or oil bound distemper by a washing and scraping and sand papering

the wall surface smooth including necessary repairs to scratches complete.

Item No.58 Distempering with dry distemper of approved brand and manufacture (two coats) and of required

shade on wall surfaces of given an even shade, over and including a priming coat of

whiting after thoroughly brooming the surface free from mortar dropping and other foreign

Distempering with dry distemper of approved brand and manufacture (two coats) and of required

shade on wall surfaces of given an even shade, over and including a priming coat of

whiting after thoroughly brooming the surface free from mortar dropping and other foreign

Item No.59 Distempeing (Two coats) with oil bound distemper of approved brand and manufacture

and of required shade on wall surfaces to give an even shade, over and including a priming

coat with distemper primer of approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered smooth.

Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and

of required shade on wall surfaces to give an even shade, over and including a priming coat

with distemper primer of approved brand and manufacture after thoroughly brushing the

surface free from mortar dropping and other foreign matter and also including preparing

the surface even and sand papered smooth.

Item No.60 Extra Coat for Above Item over above for every subsequent coat of approved brand and

Extra Coat for Above Item over above for every subsequent coat of approved brand and

Item No.61 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture

on undecorated wall surface to give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture

on undecorated wall surface to give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered smooth.

Item No.62 Extra over item for every sub sequent coat of wall painting with plastic emulsion paint of

approved brand,Extra over item for painting with plastic emulsion paint of approved brand on

ceilings and sloping roofs.

Extra over item for every sub sequent coat of wall painting with plastic emulsion paint of approved

brand,Extra over item for painting with plastic emulsion paint of approved brand on ceilings and sloping

Item No.63 Applying priming coat over new steel and other metel surface after and including preparing

the surface by throughly cleaning, oil, grease, dirt and other foreign matter and scoured

with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing

Applying priming coat over new steel and other metel surface after and including preparing

the surface by throughly cleaning, oil, grease, dirt and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red

Item No.64 Painting two coats (excluding priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade including cleaning the surface an even

shade including cleaning the surface of all dirt, dust and other foreign matter.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

paint, brushing, interior to give an even shade including cleaning the surface an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Item No.65 Painting one coats (excluding priming coat) on previously painted steel and other metal surface

with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

Painting one coats (excluding priming coat) on previously painted steel and other metal surface

with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

Item No.66 Extra over item for every sub sequent coat of paint.

Extra over item for every sub sequent coat of paint.

Item No.67 Painting two coats (excluding priming coat) on new steel and other metal surface with

synthetic enamel paint, brushing to give an even shade including cleaning the surfaceofalldirt,dust

and other foreign matter.

Painting two coats (excluding priming coat) on new steel and other metal surface with

synthetic enamel paint, brushing to give an even shade including cleaning the surfaceofalldirt,dust

and other foreign matter.

Item No.68 Painting one coats (excluding priming coat) on previously printed steel and other metal surface

with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on previously printed steel and other metal surface

with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

Item No.69 Extra over Above item for every sub sequent coat of paint.

Extra over Above item for every sub sequent coat of paint.

Item No.70 Painting two coats (excluding priming coat) on external surface of new rain water, soil, waste

and vent pipes and fittings with ready mixed bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external surface of new rain water, soil, waste

and vent pipes and fittings with ready mixed bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dustand other foreign matter.(75 mm dia)

Item No.71 Painting two coats (excluding priming coat) on external surface of new rain water, soil, waste

and vent pipes and fittings with ready mixed bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on external surface of new rain water, soil, waste

and vent pipes and fittings with ready mixed bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dust and other foreign matter.(100 mm dia)

Item No.72 Painting two coats (excluding priming coat) on new wood and wood based surface with

enamel paint, interior to give an even shade including cleaning the surface of all dirt,

dust and other foreign matter sand papering and stopping. (a) Ready mixed paint brushing wood

Painting two coats (excluding priming coat) on new wood and wood based surface with

enamel paint, interior to give an even shade including cleaning the surface of all dirt, dust

and other foreign matter sand papering and stopping. (a) Ready mixed paint brushing wood primier

Item No.73 Painting one coats (excluding priming coat) on previously painted wood and wood based

surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other

foreign matter.(b) Ready mixed paintbrushing priming for enamel

Painting one coats (excluding priming coat) on previously painted wood and wood based

surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other

foreign matter.(b) Ready mixed paintbrushing priming for enamel

Item No.74 Extra over Above item for every sub sequent coat of paint.

Extra over Above item for every sub sequent coat of paint.

Item No.75 Painting two coats (excluding priming coat) on new wood and wood based surface with

ready mixed paint, brushing, oil, gloss, semi gloss to give and even shade including cleaning of all

dust, dirt and other foreign matters and papering and stopping.

Painting two coats (excluding priming coat) on new wood and wood based surface with

ready mixed paint, brushing, oil, gloss, semi gloss to give and even shade including cleaning of all

dust, dirt and other foreign matters and papering and stopping.

Item No.76 Painting the kids picture chart & letter writting of different size and shapes as per details/design

etc.comp. as dire.

Painting the kids picture chart & letter writting of different size and shapes as per details/design

etc.comp. as dire.

Item No.77 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape even shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give

an required shape even shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

Item No.78 Applying two coats of Birla (white cement based) or Asian (acryliclapy-putty) or

equivalent & two coats of primer of approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Applying two coats of Birla (white cement based) or Asian (acryliclapy-putty) or equivalent

& two coats of primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Item No.79 " Painting one coats (excluding priming coat) on previously painted wood and wood based surface

with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign

" Painting one coats (excluding priming coat) on previously painted wood and wood based surface with

enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter.

Item No.80 Writing letter or figures on any surface with black japan paint (stops, comas, hyphens and

the like not to be measured and paid for separately) (i) Block (Letters/Figures) (Per

Letter pet CM.HT)

Writing letter or figures on any surface with black japan paint (stops, comas, hyphens and

the like not to be measured and paid for separately) (i) Block (Letters/Figures) (Per

Letter pet CM.HT)

Item No.81 Demolition including stacking of serviceable materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with

all lead and lift. (i) R.C.C. work

Item No.82 Demolition of Brick work and stone masonry including stacking of serviceable materil as and

disposalof unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Demolition of Brick work and stone masonry including stacking of serviceable materil as and

disposalof unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Item No.83 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materil as and

disposal of unserviceable materials with all lead and lift.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materil as and

disposal of unserviceable materials with all lead and lift.

Item No.84 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materil as and disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable

materil as and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing

Item No.85 Dismentling steel work including distempering and stacking the materials with all lead and

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Item No.86 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, hold fasts and other attachment etc. complete and stacking the

material within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, hold fasts and other attachment etc. complete and stacking the material

within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Item No.87 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves,hold fasts and other attachment etc. complete and stacking the

material with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves,hold fasts and other attachment etc. complete and stacking the

material with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Item No.88 Dismentling barbed wire in fencing including making rolls and also including dismentling fencing

posts including all earth work concrete in base and making good the disturbed ground

stacking useful materials as directed and disposing as directed and disposing of

the unserviceable materials with all lead and lift.

Dismentling barbed wire in fencing including making rolls and also including dismentling fencing

posts including all earth work concrete in base and making good the disturbed ground stacking

useful materials as directed and disposing as directed and disposing of the

unserviceable materials with all lead and lift.

Item No.89 Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with fittings and clamps

including stacking the materials with all lead and lift (for any dia, of pipe)

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with fittings and clamps

including stacking the materials with all lead and lift (for any dia, of pipe)

Item No.90 Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe an type, flushing tank

etc. including stacking the materials with all lead and lift

Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe an type, flushing tank

etc. including stacking the materials with all lead and lift

Item No.91 Scraping oil paint from steel and other metal surface and making the surface even (with

Hand Scraping.)

Scraping oil paint from steel and other metal surface and making the surface even (with

Hand Scraping.)

Item No.92 Removing and scraping of old deteriorated plaster of any thickness from wall /

R.C.C member including stacking of serviceable material and disposal of unserviceable from

site of work with all lead and lift

Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C

member including stacking of serviceable material and disposal of unserviceable from site of

work with all lead and lift

Item No.93 Providing and fixing M.S. fan clamps of shape and size as specified in existing R.C.C. slab

including cutting chase and making good.

Providing and fixing M.S. fan clamps of shape and size as specified in existing R.C.C. slab

including cutting chase and making good.

Item No.94 Cutting out cracks of roof terrace to V-section, cleaning out, wetting, grouting with cement and

sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks of roof terrace to V-section, cleaning out, wetting, grouting with cement and

sand slurry 1:3 (1-cement 3-sand )

Item No.95 Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with a hot

mixture of bitumen and clean dry sand (1:1 by weight)

Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with a hot mixture

of bitumen and clean dry sand (1:1 by weight)

Item No.96 Providing & Fixing in position Alluminium doors with frame using approved quality

anodised extruded alluminium section as approved by Engg.in charge(Jindal alluminium)(a)

Frame sections 101.6x44.45 mm (b) Shutter bottom vertical & top section 83.5x44.45

(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45 mm at (1.37 kg/mt)

Shutter middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard quality fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in

Providing & Fixing in position Alluminium doors with frame using approved quality

anodised extruded alluminium section as approved by Engg.in charge(Jindal alluminium)(a) Frame

sections 101.6x44.45 mm (b) Shutter bottom vertical & top section 83.5x44.45 (wt.1.31

kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45 mm at (1.37 kg/mt) Shutter middle

section at 100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved color

Acrylic sheet of standard quality fixed with glazing chips on upper pannel & Laminated sheet on

lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Item No.97 Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed / Fully Glazed

Alluminium doors with frame using approved quality anodised extruded alluminium

section as approved by Engg. In charge.(Jindal alluminium )(a) Frame sections 101.6x44.45 mm b)

Shutter vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter

bottom section at 114.3 x44.45mm at ( 1.37 kg/mt ) Shutter middle section at 100x44.3 wt. (1.37

kg/mt ) incl. providing & installing 5 mm thick Glass of standaed quality fixed / 12 mm

thick Laminated sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp. as per Detail

Given & direction of engg.in charge.

Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed / Fully Glazed

Alluminium doors with frame using approved quality anodised extruded alluminium section

as approved by Engg. In charge.(Jindal alluminium )(a) Frame sections 101.6x44.45 mm b) Shutter

vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter bottom section

at 114.3 x44.45mm at ( 1.37 kg/mt ) Shutter middle section at 100x44.3 wt. (1.37 kg/mt ) incl.

providing & installing 5 mm thick Glass of standaed quality fixed / 12 mm thick Laminated

sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp. as per Detail Given &

direction of engg.in charge.

Item No.98 Providing & Fixing in position Alluminium window 2/3/4 track sliding / fix type with

frame using approved anodised extruded alluminium section as approved by Engg. In

charge.(Jindal alluminium) units equivalent. including P/F installing 5 mm thick clear/tinted

Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium window 2/3/4 track sliding / fix type with frame

using approved anodised extruded alluminium section as approved by Engg. In

charge.(Jindal alluminium) units equivalent. including P/F installing 5 mm thick clear/tinted Glass

of standard quality etc.comp.

Item No.99 Providing & Fixing in position Alluminium vents with frame using approved anodised

extruded alluminium section as approved by Engg. In charge.(Jindal alluminium) units

equivalent Frame section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl. Providing & Installing

mm thick Glass of standard quality etc. comp.

Providing & Fixing in position Alluminium vents with frame using approved anodised extruded

alluminium section as approved by Engg. In charge.(Jindal alluminium) units equivalent

Frame section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl. Providing & Installing 5 mm thick

Glass of standard quality etc. comp.

Item No.100Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm

thick pre coated GI sheet. The Pre coatedsheet shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per

IS:277:1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PP GI Sheet shall have plastic protective guard film of minimum 25 microns to

avoid scratches during transportation. The ridge shall be fixed to the steel members by

poprivetor self drilling/self stitching fastners @ maximum 450mm c/c along length of

capping/flashing etc complete .

Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm

thick pre coated GI sheet. The Pre coatedsheet shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per

IS:277:1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PP GI Sheet shall have plastic protective guard film of minimum 25 microns to

avoid scratches during transportation. The ridge shall be fixed to the steel members by

poprivetor self drilling/self stitching fastners @ maximum 450mm c/c along length of

capping/flashing etc complete .

Item No.101Supplying and fixing vinyl flooring over the surface having 1-2 mm thickness as per directed

by engineer incharge etc as completed (N.S.)

Supplying and fixing vinyl flooring over the surface having 1-2 mm thickness as per directed

by engineer incharge etc as completed (N.S.)

Item No.102Providing and laying 15mm bamboza wooden flooring as per architect's drawing with

all necessary details as directed by the project consultants. Use underlay for better result

as per Detail specifications and directed by the project consultants. (N.S.) Approved Rate )

Providing and laying 15mm bamboza wooden flooring as per architect's drawing with

all necessary details as directed by the project consultants. Use underlay for better result as

per Detail specifications and directed by the project consultants. (N.S.) Approved Rate )

Item No.103Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40 mm x

mm x 6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed

to posts with G.I, staples including fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M. block

in C.C 1:5:10 etc complete.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40 mm x

mm x 6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to

posts with G.I, staples including fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M. block in

C.C 1:5:10 etc complete.

Item No.104Renovation and Repairing work in Chainlink fencing any size and also refixing work incl.

febrication work with all materails to be painted one coat of primer and twocoats of paint

as directed inline and level. (N.S.)

Renovation and Repairing work in Chainlink fencing any size and also refixing work incl.

febrication work with all materails to be painted one coat of primer and twocoats of paint as

directed inline and level. (N.S.)

Item No.105Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over B.B. masonry in C.M, (1:6) in

front and dwarf wall 1.0 Mt. high and 23 cm. thick cement plaster to masonry / in C.M.1:3) and

cement concrete flooring in 1:2:4: mix 5cm.dia.drain pipe etc.complete.

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over B.B. masonry in C.M, (1:6) in

front and dwarf wall 1.0 Mt. high and 23 cm. thick cement plaster to masonry / in C.M.1:3) and

cement concrete flooring in 1:2:4: mix 5cm.dia.drain pipe etc.complete.

Item No.106Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B. Masonry walls 23 cm.

thick in C.M. (1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips

set in C.M. (1:6) (6 mm thick terrazo) with plastering on exposed faces walls in C.M. (1:4) etc

Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B. Masonry walls 23 cm.

thick in C.M. (1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips set

in C.M. (1:6) (6 mm thick terrazo) with plastering on exposed faces walls in C.M. (1:4) etc

Item No.107Extra rate for using Ready Mix Concrete of any grade for below ground level to vertical

upto any floor with delivery & suction Pipe & Pump etc. The rate includes fule, pump operator,

skilled labor, driver etc completed and as per direction of engineer in charge

Extra rate for using Ready Mix Concrete of any grade for below ground level to vertical upto

any floor with delivery & suction Pipe & Pump etc. The rate includes fule, pump operator, skilled

labor, driver etc completed and as per direction of engineer in charge

Item No.108P/A Tremix with dewartering machine and floater machine on constructed CC work for

finishing the surface as per requirement. The rate including all machinaries, labor, loading,

unloading, transportaion etc complete as per direction given by engineer incharge.

P/A Tremix with dewartering machine and floater machine on constructed CC work for

finishing the surface as per requirement. The rate including all machinaries, labor, loading,

unloading, transportaion etc complete as per direction given by engineer incharge.

Item No.109Carrying out timber treatment to all wood work including drilling holes and spraying oil based

chemical solution on surface of timber work for termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by mass) is

recommended one litre chemical emulsion diluted with 19 liters of kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter chemical emulsion application in drilled holes and

0.75 / Litre chemical per one Sqmt two coat on wood surface not protected by paint or varnish.

Carrying out timber treatment to all wood work including drilling holes and spraying oil based chemical

solution on surface of timber work for termite control including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by mass) is recommended one litre

chemical emulsion diluted with 19 liters of kerosene. Total diluted concentration will be 20 liters

inclusive of 1 liter chemical emulsion application in drilled holes and 0.75 / Litre chemical per one Sqmt

two coat on wood surface not protected by paint or varnish.

Item No.110"Applying general insecticide pest control treatment to floors, cupboards etc including labour

materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by

mass) is recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

"Applying general insecticide pest control treatment to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

Item No.111Carring out plinth treatment to post construction / existing structure by spraying chemical solution

for termite control treatment including labour and material consist ment with I.S.

specification. Using Chlordene and Chior purfiles 20 EC. As Per 6131_paret-II

Consentration Weight on percentis recommended i.e one litre 20 EC chemical emulsion with

liter give 1% concrentration inclusive of one litre chemical emulsion appication attherate of

5 Litre chemical / Sqm of surface is recommended as per I.S

Carring out plinth treatment to post construction / existing structure by spraying chemical solution

for termite control treatment including labour and material consist ment with I.S. specification.

Using Chlordene and Chior purfiles 20 EC. As Per 6131_paret-II Consentration Weight on

percentis recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre chemical emulsion appication attherate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Item No.112"Carrying out wall treatment for termite control including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by

mass) is recommended i.e one litre chemical

emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre chemical / Sqm of surface is recommended as per I.S.S"

"Carrying out wall treatment for termite control including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by

mass) is recommended i.e one litre chemical emulsion diluted with 19 liter oil base. Total solution will

be 20 liters inclusive of one liter chemical emulsion application at the rate of 7.5 litre chemical / Sqm of

surface is recommended as per I.S.S"

Item No.113Providing erecting and fixing double coated Syntex or equivalent PVC.(ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete on terrace.

Providing erecting and fixing double coated Syntex or equivalent PVC.(ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete on terrace

Item No.114Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of

the following nominal bore, tube fitting and clamps including making good the wall ceiling and

floor.15mm ,20mm ,25mm ,32mm ,40mm ,50mm

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of

the following nominal bore, tube fitting and clamps including making good the wall ceiling and

floor.15mm ,20mm ,25mm ,32mm ,40mm ,50mm

Item No.115Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the

following nominal bore, and tube fitting (Earth work in trenches to be measured and paid

for separately),15mm,20mm ,25mm ,40mm,65mm ,80mm

Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the

following nominal bore, and tube fitting (Earth work in trenches to be measured and paid for

separately),15mm,20mm ,25mm ,40mm,65mm ,80mm

Item No.116Making connection of galvanised Mild steel distribution branch with galvanised mild steel main

mm to 80 mm nominal bore by providing and fixing tee including cutting and threading

the pipes complete.

Making connection of galvanised Mild steel distribution branch with galvanised mild steel main

50 mm to 80 mm nominal bore by providing and fixing tee including cutting and threading

the pipes complete.

Item No.117Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working pressure poluthene pipes of

the following out side Dia. Low densidy, complete with special falnge compression type

fittings,wall clips etc.including making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working pressure poluthene pipes of the

following out side Dia. Low densidy, complete with special falnge compression type

fittings,wall clips etc.including making good the wall ceiling and floor.

Item No.118Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy, complete with special falnge compression type

fittings, wall clips etc. including making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy, complete with special falnge compression type

fittings, wall clips etc. including making good the wall ceiling and floor.

Item No.119Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self

cleaning design with C.I. screaed down or higned grating including cost of cutting and making

good the walls and floor 100 mm inlet and 50 mm outlet.(C)100mm dia.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self

cleaning design with C.I. screaed down or higned grating including cost of cutting and making

good the walls and floor 100 mm inlet and 50 mm outlet.(C)100mm dia.

Item No.120Providing and fixing water closet squatting Pan (Indian type W.C.Pan) size 580 mm

(Earth work, bed concrete, foot rest and trap to be measured and paid for separately) (A)

Vitreous China. (I)Long pattern = White colour

Providing and fixing water closet squatting Pan (Indian type W.C.Pan) size 580 mm (Earth

work, bed concrete, foot rest and trap to be measured and paid for separately) (A) Vitreous

China. (I)Long pattern = White colour

Item No.121Provdg. & fixing wall mounted White / Color Vitreous China European water closet

with integral P trap of "Cera" - Clair Series or equivalent incl. seat cover , Chair Bracket etc.

complete as per direction of engg. In charge.(N.S.)

Provdg. & fixing wall mounted White / Color Vitreous China European water closet

with integral P trap of "Cera" - Clair Series or equivalent incl. seat cover , Chair Bracket etc.

complete as per direction of engg. In charge.(N.S.)

Item No.122Providing and fixing wsh down water closet (Europe an type, W.C.Pan) with integral P or S

trap including jointing the trap with soil pipe in Cement Mortar1:1 (1- Cement:1-fine sand)

(Seal and cover to be measured and paid forseparately) (A) vitreous China Pattern :(i) in white

Providing and fixing wsh down water closet (Europe an type, W.C.Pan) with integral P or S

trap including jointing the trap with soil pipe in Cement Mortar1:1 (1- Cement:1-fine sand)

(Seal and cover to be measured and paid forseparately) (A) vitreous China Pattern :(i) in white

Item No.123Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or " Hindware" incl. C.P. Brass

waste coupline , waste pipe, pvcconnection etc. Complete.( size 635 x395x420 mm )

Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or " Hindware" incl. C.P. Brass waste

coupline , waste pipe, pvcconnection etc. Complete.( size 635 x395x420 mm )

Item No.124Providing & Fixing Angle cock of " Ess Ess" - Trend series or equivalent standard make as

approved by engg. in charge all complete. (N.S.)

Providing & Fixing Angle cock of " Ess Ess" - Trend series or equivalent standard make as

approved by engg. in charge all complete. (N.S.)

Item No.125Providing and fixing 100 mm size P or S trap for water closet squatting pan including jointing

the trap with the pan and soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand)(A) Vitreous

Providing and fixing 100 mm size P or S trap for water closet squatting pan including jointing

the trap with the pan and soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand)(A) Vitreous

Item No.126Providing and fixing wash basin with single hole for pillar tap with C.I.or M.S. brackets painted

white including sutting holes and making good the same but excluding fittings. (A) Vitreous

China: (ii) Flat Back wash basin 550 mm x v 400 mm size.(i) In white colour.

Providing and fixing wash basin with single hole for pillar tap with C.I.or M.S. brackets painted

white including sutting holes and making good the same but excluding fittings. (A) Vitreous

China: (ii) Flat Back wash basin 550 mm x v 400 mm size.(i) In white colour.

Item No.127Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes

in walls and making good the same but excluding fittings. © Vitreous China Sink. (i) 600 mm x

450 mmx 150 mm size

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting

holes in walls and making good the same but excluding fittings. © Vitreous China Sink. (i) 600 mm

x 450 mmx 150 mm size

Item No.128Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior glass mounted on

mm thick A.C. sheet or ply wood sheet and fixing to wooden pluge with C.P. brass screws and

Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior glass mounted on

6 mm thick A.C. sheet or ply wood sheet and fixing to wooden pluge with C.P. brass screws and

Item No.129Providing and fixing chromium plated brass halftrun flush cock of approved quality including fixing in

pipe line etc. complete.

Providing and fixing chromium plated brass halftrun flush cock of approved quality including fixing in

pipe line etc. complete.

Item No.130Provdg. & fixing White / Color Vitreous china Counter wash basin with signle hole for pillar

tap of "Cera " - Concord series of 550 x425 mm size to be fiited in stone counter with necessary

brackets painted white incl. cutting holes and making good the same .Cost Includes P/F C.P.

brass waste coupline, 32 mm dia fisher union ,15 mm dia. Pillar cock & Angle cock of " Ess Ess"-

Trend series ,32 mm dia. Waste pipe etc. complete as per dir. of engg. in charge.

Provdg. & fixing White / Color Vitreous china Counter wash basin with signle hole for pillar tap

of "Cera " - Concord series of 550 x425 mm size to be fiited in stone counter with necessary

brackets painted white incl. cutting holes and making good the same .Cost Includes P/F C.P.

brass waste coupline, 32 mm dia fisher union ,15 mm dia. Pillar cock & Angle cock of " Ess Ess"-

Trend series ,32 mm dia. Waste pipe etc. complete as per dir. of engg. in charge.

Item No.131Providing and fixing washbasin with single holefor pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making goodthe same but excluding fittings.(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v400mm size. (i) In white colour.

Providing and fixing washbasin with single holefor pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making goodthe same but excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v400mm size. (i) In white colour.

Item No.132Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or Equivalent Make for

Kitchen Platform of size : 24":x18" as per Direction of engg. In charge

Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or Equivalent Make for Kitchen

Platform of size : 24":x18" as per Direction of engg. In charge

Item No.133Providing and fixing C.P. brass towel rail comlete with C.P.brass brackets fixed to wooden

plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing C.P. brass towel rail comlete with C.P.brass brackets fixed to wooden

plugs with C.P. brass scews.(B) 600mm x 20mm size.

Item No.134Providing and fixing 600 mmx120 mm glass shelf with C.P. brass bracket and guard rail

complete mixed to wooden plug with C.P.brass screws.

Providing and fixing 600 mmx120 mm glass shelf with C.P. brass bracket and guard rail complete

mixed to wooden plug with C.P.brass screws.

Item No.135Providing and fixing toilet paper holder. (A) C.P.Brass

Providing and fixing toilet paper holder. (A) C.P.Brass

Item No.136Providing and fixing screw down bib taps of following size. (A) Brass screw down bib tap

polished bright.

Providing and fixing screw down bib taps of following size. (A) Brass screw down bib tap

polished bright.

Item No.137Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws

Item No.138Providing and fixing screw down bib taps of following size. © Gun metal screw down bib tap.

Providing and fixing screw down bib taps of following size. © Gun metal screw down bib tap.

Item No.139Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks

Item No.140Providing and fixing Gun metal check or non-return fullway wheel valve.

(III) 25 MM DIA

Providing and fixing Gun metal check or non-return fullway wheel valve.

(III) 25 MM DIA

Item No.141Providing and fixing chromium plated brass half trun flush cock of approved quality including

fixing in pipe line etc. complete.

(iii) 32mm dia.

Providing and fixing chromium plated brass half trun flush cock of approved quality including

fixing in pipe line etc. complete.

(iii) 32mm dia.

Item No.142Providing and fixing Urinal or approved quality including conecting the Urinal with

waste pipe , tap etc.complete. (A) White earthen ware flat back or corner type size 430mm x

Providing and fixing Urinal or approved quality including conecting the Urinal with

waste pipe , tap etc.complete. (A) White earthen ware flat back or corner type size 430mm x

Item No.143Providing and fixing Urinal of approved quality including connection with trap and

with integral longitudinal flush pipe. (A) Squating plate pattern white earthen ware 550mm x

Providing and fixing Urinal of approved quality including connection with trap and

with integral longitudinal flush pipe. (A) Squating plate pattern white earthen ware 550mm x

Item No.144Providing and fixing chromium plated, bottle trap with necessary couplings of approved

quality for wash basin.

Providing and fixing chromium plated, bottle trap with necessary couplings of approved

quality for wash basin.

Item No.145Providing and fixing ball cock ofapproved quality as directed. (A) Copper Metal (i) 25mm dia.

and fixing ball cock ofapproved quality as directed. (A) Copper Metal (i) 25mm dia.

Item No.146Providing and fixing ball cock of approved quality as directed. (B)Abonite (i) 25mm dia.

Providing and fixing ball cock of approved quality as directed. (B)Abonite (i) 25mm dia.

Item No.147Filling with good Quality thor as and where directed by the Architect / Engineer-in-

charge, in sunk in layers of 15 cm. thickness, including watering, ramming well etc. complete, as

directed by the Architect / Engineer-in-charge .

Filling with good Quality thor as and where directed by the Architect / Engineer-in-charge,

in sunk in layers of 15 cm. thickness, including watering, ramming well etc. complete, as directed by

the Architect / Engineer-in-charge

Item No.148Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with solvent, including cost of all

materials.adhesive

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with solvent, including cost of all materials.adhesive

Item No.149Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Item No.150Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all materials.

Item No.151Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Item No.a Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe (SCH-40) for cold

water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C

or shall be concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Item No.152Providing in line level plumb, fabricating and fixing three row horizontal barbed wire

fencing and punched tape concertina coil of 9 turns per meter of 610 mm dia fixed with clips on

top of the angle iron posts. The punched tape concertina coil having sharp barbs at every

mm spacing shall be 0.5 mm thick and 19 mm width and weighting 13 kg/100 mt. (Average) as per

manufacture's specification. The rate shall also include providing and fixing 1.20 mt.total

long MS angle 40 x 40 x 6 mm @3.00 mt.c/c spacing embaded in RCC column, angle posts shall be

painted with one coats of red oxide and two coats of enamel paint of approved quality at top

Providing in line level plumb, fabricating and fixing three row horizontal barbed wire fencing

and punched tape concertina coil of 9 turns per meter of 610 mm dia fixed with clips on top of the

angle iron posts. The punched tape concertina coil having sharp barbs at every 25 mm spacing

shall be 0.5 mm thick and 19 mm width and weighting 13 kg/100 mt. (Average) as per manufacture's

specification. The rate shall also include providing and fixing 1.20 mt.total long MS angle 40 x

40 x 6 mm @3.00 mt.c/c spacing embaded in RCC column, angle posts shall be painted with one coats

of red oxide and two coats of enamel paint of approved quality at top compound wall.

Item No.153Fixing sun film for protection sunlight in black or any colour as as directd by engineer In

Charge.(Market rate)

Fixing sun film for protection sunlight in black or any colour as as directd by engineer In Charge.(Market

Item No.154Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color / Pattern as per

Consultant's design also includes required fabrication structure in the grid of 2'-0x2'-0 size

using hollow pipe of16 gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen Washers, Silicon paste

application for fixing the sheet . Rate also includesnecessary bending, cutting, labor charges

Zinc Primer coat & Two coats of oil painting of color as approved by consultants & making good

the wall. (N.S.)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color / Pattern as per

Consultant's design also includes required fabrication structure in the grid of 2'-0x2'-0 size

using hollow pipe of16 gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen Washers, Silicon paste

application for fixing the sheet . Rate also includesnecessary bending, cutting, labor charges , Zinc

Primer coat & Two coats of oil painting of color as approved by consultants & making good the

Item No.155Providing 2 mm thick F.R.P. Gutter with necessary M.S. Supporting Brackets. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S. Supporting Brackets. (N.S.)

Item No.156Hiring charges for J.C.B.machine inclduing cost of fuel, operator, dirver etc.. ( 12 hours

sift day/night) (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel, operator, dirver etc.. ( 12 hours

sift day/night) (N.S.)

Item No.157To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with all tools like bucket drum,

showels, trikam, pavadas, etc,, to carryout different works during monsoon for

Hrs. Shift. Work shall be carried out as per the instrucitons of Engineer In-Charge.No extra

charged shall be paid for night shift.

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with all tools like bucket drum,

showels, trikam, pavadas, etc,, to carryout different works during monsoon for 12 Hrs.

Shift. Work shall be carried out as per the instrucitons of Engineer In-Charge.No extra charged

shall be paid for night shift

Item No.158Roller Blind Providing and fixing Roller Blind curtain fixed on window level on wooden

batten and curtain lift with cotton thin rope, make of aerolax or equivalent design and

colour as per instruction by engineer – in – Charge with necessary hardware fitting, material

and labour etc complete.

Roller Blind Providing and fixing Roller Blind curtain fixed on window level on wooden

batten and curtain lift with cotton thin rope, make of aerolax or equivalent design and

colour as per instruction by engineer – in – Charge with necessary hardware fitting, material and

labour etc complete.

Item No.159Providing & Fixing Door closer - Door closers (Heavy type of 765 number) Hardwire or Everite Prabhat

Providing & Fixing Door closer - Door closers (Heavy type of 765 number) Hardwire or Everite Prabhat or

Item No.160Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent to shape with hooked ends of

R.C.C. slabs during laying incl. painting the exposed protion of loops, all as per standard design

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent to shape with hooked ends

of R.C.C. slabs during laying incl. painting the exposed protion of loops, all as per standard design

Item No.161Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement

finishing, watering etc. complete.

Item No.162Making Water connection from exi.Muni. Water line (N.S.)

Making Water connection from exi.Muni. Water line (N.S.)

Item No.163Providing and applying fibere reinforced cementitious micro concrete work in cellings

and beams incl.mixture of CEMSCREED HM (F) fair mate company material, FBR

bonding agent material with water in suItable proportion anti corrosive treatment on

exposed beam,celling steel bars with safeCore R incl.all kind of labour etc.comp.including three

coat of white wash.(Approved Rate)

Providing and applying fibere reinforced cementitious micro concrete work in

cellings and beams incl.mixture of CEMSCREED HM (F) fair mate company material,

FBR bonding agent material with water in suItable proportion anti corrosive treatment on

exposed beam,celling steel bars with safeCore R incl.all kind of labour etc.comp.including three

coat of white wash.(Approved Rate)

Item No.164Providing and Fixing 1 H.P. Electrical monoblock or submarcible water pumps withmotor and required

cable and switch board of approved brand and make etc.comp.as directed.

Providing and Fixing 1 H.P. Electrical monoblock or submarcible water pumps withmotor and required

cable and switch board of approved brand and make etc.comp.as directed.

Item No.165.Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in

position complete up to floor two level

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in

position complete up to floor two level

Item No.166ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding bending,binding and placing in

position complete upto floor two level placing in position complete upto floor two level placing in

position complete upto floor two level

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding bending,binding and placing in

position complete upto floor two level placing in position complete upto floor two level placing in

position complete upto floor two level

Item No.167Providing and fixing 30mm thick solid both side prelam PVC door shutter (sintex door-equivalent)

with necessary alluminium fitting with EL-7 section frame

Providing and fixing 30mm thick solid both side prelam PVC door shutter (sintex door-equivalent) with

necessary alluminium fitting with EL-7 section frame

Item No.168Conveyance charge of Earth,Lime, Murrum, building rubbish earch manure or sludge and excavated

rock and fly ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.)

Conveyance charge of Earth,Lime, Murrum, building rubbish earch manure or sludge and excavated

rock and fly ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.)

Item No.169Providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo and pllars laid on

10 mm thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with gray cement slurry

including rubbing & polishing etc.complete.

Providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo and pllars laid on

mm thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with gray cement slurry including

rubbing & polishing etc.complete.

Item No.170Wall panelling with 12 mm MDF fixed to existing alluminium framing and making grove as per

design and finished with royal plastic paint as per instruction of engineer incharge. (N.S.)

Wall panelling with 12 mm MDF fixed to existing alluminium framing and making grove as per

design and finished with royal plastic paint as per instruction of engineer incharge. (N.S.)

Item No.171Providing and fixing flush door shutters, solid core construction with frame of first class

hardwood with cross board and face veneer or plywood face panels, with both side 1 mm

laminate finishing including anodized aluminum butt hinges with necessary screws.

Decorative type and pine wood core anodized minimum 3 no 150 mm long aluminum butt

hinges in flush door shutters with 2 no of brass holdfast 325 mm long 1 no brass tower bolt

250 mm long and two no of 150 mm long brass door handle . Decorative both side laminated

Flush door 35 mm thick. with frame of 10 cm x 7 cmt Indian teak wood frame including all

necessary fitting fixtures hardware screw and adhesive etc fixing up to all lead and lift

height up to 45 mtr from GL etc complete as per direction of engineer in charge

Providing and fixing flush door shutters, solid core construction with frame of first class

hardwood with cross board and face veneer or plywood face panels, with both side 1 mm

laminate finishing including anodized aluminum butt hinges with necessary screws. Decorative

type and pine wood core anodized minimum 3 no 150 mm long aluminum butt hinges in flush

door shutters with 2 no of brass holdfast 325 mm long 1 no brass tower bolt 250 mm long and

two no of 150 mm long brass door handle . Decorative both side laminated Flush door 35 mm

thick. with frame of 10 cm x 7 cmt Indian teak wood frame including all necessary fitting

fixtures hardware screw and adhesive etc fixing up to all lead and lift height up to 45 mtr from GL

etc complete as per direction of engineer in charge

Item No.172P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer in charge same as lal

darwaja garden pattern consisting of 3'dia. M.S black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C

1:2:4 block of 9"x9"x9" size chain link jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle frame

8'x4' size with MS flat of size 25x3 mm welded jali etc.comp.The jali is to be welded to MS pipe with

MS flat as instruction given.The M.S pipe and the M.S angle frame are to be painted one coat of

primer and two coats of paint as directed in line and level. (N.S)

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer in charge same as lal

darwaja garden pattern consisting of 3'dia. M.S black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4

block of 9"x9"x9" size chain link jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle frame 8'x4'

size with MS flat of size 25x3 mm welded jali etc.comp.The jali is to be welded to MS pipe with MS flat

as instruction given.The M.S pipe and the M.S angle frame are to be painted one coat of primer and two

coats of paint as directed in line and level. (N.S)

Item No.173Providing & Fixing masonary wall with porbandar lachiya stone with well dressed grooveas per

directed by engg.in charge for foundation, plinth or super structure level (above plinth level upto

floor two level) in cement mortar 1:5 (1-cement : 5-fine sand) incl.pointing the joint with white

cement and yellow oxide powder in proportion to match stone colour the joints should be thread

grooved as per exi. lake stone pitching apperance (A) stone masonary wall/stone dressed single faced

(size 15"x8"x9")

(B) stone coping (size 15"x8"x4")

(C) stone coping (size 15"x8"x9")

(D) stone column (size 15"x15")

(E) stone column top (size 20"x20"x9")

Providing & Fixing masonary wall with porbandar lachiya stone with well dressed grooveas per

directed by engg.in charge for foundation, plinth or super structure level (above plinth level upto floor

two level) in cement mortar 1:5 (1-cement : 5-fine sand) incl.pointing the joint with white cement and

yellow oxide powder in proportion to match stone colour the joints should be thread grooved as per exi.

lake stone pitching apperance (A) stone masonary wall/stone dressed single faced (size 15"x8"x9")

(B) stone coping (size 15"x8"x4")

(C) stone coping (size 15"x8"x9")

(D) stone column (size 15"x15")

(E) stone column top (size 20"x20"x9")

Item No.174Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb block for Footpath in M-20 grade

using 20 mm nominal size black trap aggregate of Sevaliya/Timbaor equivalent quality

for pre-cast blocks, reasonablyexposed finish/ formwork , mould with well