SPECIAL REPAIR TO RCC BEAM AND CHAJJAS (50 QTRS) IN DAD RESIDENTIAL COLONY SECTOR 35-B UNDER GE CHANDIGARH

Amount

Demolition of Brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles

M&L Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4) complete all as specified.

M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:4) complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed

M&L for providing, cement concrete PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed

M&L Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface, finished the surface even and smooth without using extra cement , complete, all as specified

M&L rendering 15 mm thick (10 mm thick dubbing coat & 5 mm thick floating coat) on wall /concrete surfaces after application of neat cement slurry with 3.0kg of cement per sq. metre on surfaces of Columns, beams, roof fascia and chajjas etc by using wire netting where required (to be measured and paid separately) finishing the surfaces even and smooth without using extra cement including taking down of cement plaster on brick wall / concrete surfaces or scrubbing down the surfaces with wire brush etc complete all as specified & directed NOTE : Work will be carried out up to a height of 12 mtr from ground level. Rates for Necessary scaffoldings/arrangements and other any T&P if any required at site including suitable safety measures to carry out the work shall be deemed to be included in the unit rate of this item .

M&L for Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples with wire mesh 25mm complete all as specified & directed

M&L for providing reinforced cement concrete 1:1.5:3 type B-1 (nominal mix) using 20 mm graded stone aggregate in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and provision of steel form work/Staging as required on site including demolition of reinforced cement concrete as in roof (other than ground floors) beams staircases, landing, and chajjas and similar suspended works and cutting out rusted and spoiled reinforced bars and removing of debris out side MoD land complete all as specified and directed NOTE : Work will be carried out up to a height of 12 mtr from ground level. Rates for Necessary scaffoldings/arrangements and other any T&P if any required at site including suitable safety measures to carry out the work shall be deemed to be included in the unit rate of this item .

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers, binders etc cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for welding in repairs exc 2.5 cm & n.exc 5 cm in length, thickness of metal to be welded exc. 9mm but n.exc 20mm thick for connecting new and old reinforcement in any position complete as directed by the Engr-in-Charge.

M&L for running welding in repairs exc 9mm but n exc 20mm thickness of metal to be welded complete as directed by the Engr-in-Charge.

M&L for preparation of newly plastered surface of walls and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer. Make/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) , Nerolac (Excel Total). NOTE : Work will be carried out up to a height of 12 mtr from ground level. Rates for Necessary scaffoldings/arrangements and other any T&P if any required at site including suitable safety measures to carry out the work shall be deemed to be included in the unit rate of this item .

M&L Complete removal of existing treatment of plastered surfaces wall and applying two coats of exterior grade acrylic emulsion paint over a coat of alkali resistant primer , including cleaning the floor / joinery, glass panes etc complete all as specified. Make/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) , Nerolac (Excel Total). NOTE : Work will be carried out up to a height of 12 mtr from ground level. Rates for Necessary scaffoldings/arrangements and other any T&P if any required at site including suitable safety measures to carry out the work shall be deemed to be included in the unit rate of this item .

shree balaji builders

His Construction Company

M/s Super Trading Corporation