SPECIAL REPAIRS TO ROOF TO BLDG NO J 92 1 92 2 P 458 OFFRS MD ACCN AT OLD ALLENBY LINES AREA PROVN OF PPGI SUN SHED IN BLDG NO P 425 TO 430 OFFRS MD ACCN AT BEPTA P 524 AT ALLENBY LINES PROVN OF PPGI SUN SHED IN BLDG NO P 698 TO P 701MAP

Amount

Taking down of old bituminous tarfelt or any other type of roof treatment from roof/concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc., complete all as specified and as directed.

Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc., complete including removal of demolished material to a distance complete all as specified and as directed.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded stone aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing compound (WPC) as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc., complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule.

Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 2% by weight of cement and finished even and smooth complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule.

M & L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non oven fabric (weight not less than 150gm/Sqm) applied on one coat of oil based bitumen emulsion primer @ 0.3 lit per Sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced ( torch) application with 10cm overlaps . A coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm to be applied on top of membrane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed.

M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free ) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc., complete all as specified and directed. Make:- Dr fixit /Berger / Perma

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick screed bed in CM 1:4 duly mixing with water proofing compound at the rate of 2% by weight of cement or as per manufacturer's instructions surface etc., complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule.

M&L for laying 300 mm x 300 mm x 20 mm thick PCC tiles (Hydraulically pressed) with grey cement, set, jointed, cut and polished. The joints shall be grouted and immediately after grouting, the joints shall be pointed flush in in CM 1:3 mixed with 150ml per Kg of cement of polymeric based liquid water proofing additive by weight of cement or as per manufacturers instructions inclusive of water proof additive etc., complete all as specified and as directed.

M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc., complete all as specified and directed.

Demolition of RCC water tank, chajja of any description and in any position not otherwise specifically provided reinforced (reinforcement of cut as required to facilasite demolition etc.,) complete all as specified and directed.

Disconnecting existing tanks of capacity exceeding 500 ltrs & not exceeding 1000 ltrs tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting/ reconnecting and re-fixing in position complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two coats (10 + 5 mm), both coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed. Note - WPC shall be measured and paid separately

Material and labour for rendering 12 mm thick on any faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified and as directed.

M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 Sqm each patch complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface and applying 3.00 mm thick white cement based wall care putty for a smooth finish complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux/NCL Paints

M&L for complete removal of existing treatment of external surfaces of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush, cleaning, washing and removing dust. Cracks less than 2 mm, should be cleaned free of dust with a vacuum cleaner, etc and applying 3.00 mm thick white cement based wall care putty for a smooth finish complete all as specified and as directed. Note:-Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works etc. Make: Birla White / Asian Paint / Diamond wall putty /JK Putty

M&L for applying 2 coats of weather proof paint over a coat of exterior wall primer including preparation of surfaces and allow it to dry before taking up the two coats, etc., complete all as specified and directed. Make: Apex Ultima from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux. (I) Unit time quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (II) The rate of application of primer and two coats shall be as per manufacturers instructions. (III) A time gap of eight hours shall be maintained between the application of primer and each coat . (IV) Application of primer and paint shall be done by an authorised applicator of the paint. (V) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (VI) The contractor shall deposit full quantity of weather proof paint to the user unit calculated based on coverage as per manufacturer's instructions before starting of paint work. The paint shall be issued to the contractor by user unit as per weekly requirement.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on ceilings complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and 3.00 mm thick white cement based wall care putty smooth finish etc., of approved make and shade complete all as specified and as directed.

M&L for preparation of old painted surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efflorescent salts and trading oil, greasy spots and applying one coat of oil bound distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height etc., complete all as specified and as directed.

All as per Sr item No. 24 above, but one coat of white wash on ceilings complete all as specified and as directed.

M&L for complete removal of existing treatment of old painted wall surfaces and applying 3.00 mm thick white cement based wall care putty smooth finish.etc of approved make & shade on walls and other places of up to any height complete all as specified and as directed.

M&L for applying one coats of priming with alkali resistant priming paint over the putty surface and approved make & shade on walls of up to any height etc., complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over the primer surface of approved make & shade on walls of up to any height etc., complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials outside of MoD land complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 etc., complete all as specified and directed.

M&L for rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc., complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm (any approved shade of square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm (any approved shade of square/ rectangular) polished, area of each tiles not exc 0.36 Sqm in walls skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and directed.

Excavating in post holes ( or similar holes ) each n.exc 0.5 cum in soft /loose soil getting out, returning filling in and ramming around in layers not exceeding 25 cm complete all as specified and as directed.

M & L for PCC 1:2:4 Type B2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack, trusses, post, rafter where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified and as directed.

S&F Steel structure/frame made of MS box/pipe sections ERW or induction butt weld tubes conforming to IS-1161-1979 grade st 240 as in columns, purlins and truss complete fitting as directed including one shop coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and as directed.

M & L for HILTI chemical Stud anchor bolt HSA-R M8x105 55/45/15mm and with designer Stainless Steel caps to cover the nut of the Anchor Stud etc., complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc., roof strusses (framed) and connecting plates, etc., including necessary precautionary measures as in supports etc., complete all as specified and as directed.

S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc., complete all as specified and directed.

M & L for applying two coats of synthetic enamel ordinary tint paint including red oxide primer and preparation extra complete on new steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in bed block, coping, roof kerbs, bands etc., including necessary form work complete all as specified and as directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa AZ-150 as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for 20-25 mm thick machine cut Polished kota stone as in flooring, treads of staircase laying down and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over bedding layer of 15mm thick in CM 1:6 complete all as specified and as directed.

M&L for designer rubber moulded chequerred cement concrete tiles with mixture of grey and white cement in equal proportions with pigments of size 200x 200xx25mm, 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layer in CM 1:6, 15mm thick for laying floor finishes etc., complete all as specified and as directed.

M & L for PCC 1:4:8 Type D2 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Cutting and grooving of wall for fixing of galvalume sheet and after fixing of galvalume sheet and making good of all cutting surfaces etc., complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc., n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in trenches, spreading, levelling watering and well ramming in layer not exc 25 cm thick complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soils complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab for drain including necessary formwork and set in CM 1:6 complete all as specified and as directed.

M&L for TMT bars 8mm to 10mm dia cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

S&F TMT bars 10 mm dia & over cut out length, bent to shape including cranking, bending and binding with 0.9 mm dia mild steel wire or securing with clips complete all as specified and as directed.

SAI RUPA CONSTRUCTIONS

RAM CHARAN CONSTRUCTIONS

M/s GM Constructions

ATUL ENTERPRISES

KIRAN CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

harshraj and co