Formation of Roads, Drains and Providing Water Supply Network and Street lighting in Sy. No. 195/1 at SHV Layout in Mangalam

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Construction of Granular sub-base by providing Locally available materials (Gravel) including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. ( Payment will be made based on levels for finished item of work ).

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.

Vibrated cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the Engineer-in-Charge for C.C Pavement.

Providing 12.7 mm thick Mastic pads for Expansion joints etc., complete for finished item of work.

Contraction sawn joint groove (using diamond studded blades) 3 to 5mm wide and 1/4 to 1/3 depth of the slab+ or 5mm or as stipulated in the drawings and dowels bars complying with clause 602.6.5 of specifications for roads and bridge works ( third revision) published at New Delhi in 1995 by IRC on behalf of Government of India, Ministry of surface transport and as detailed in the drawings the contraction joint shall be cut neatly with straight line as soon as the concrete is undergone initial hardening and as hard enough to take the load of joint sawing machine without causing damage to the concrete. The joint sealing compound shall be of hot poured bitumen type having flexibility, resistance shall be in accordance with IS 1834-1984 wih all lead and lift including cost and conveyance of all materials, etc., complete

Construction of Gravel shoulders including cost and conveyance of all materials to work site and spreading in uniform layers by approved means, on prepared surface and compacting with vibratory roller to achieve the desired density at OMC etc., complete for finished item of work as per MoRT&H Specification 401 & 407 (4th revision) and as directed by the Engineer-in-charge.

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Sand filling in foundation including cost and conveyence of all materials to site and watering, tamping etc., complete for finshed item of work as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer - in - Charge.

Providing Vibrated Cement Concrete (1:4:8) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below

Providing Vibrated Cement Concrete (1:2:4) using 20mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 (5th Revision) and as directed by the Engineer-in-Charge for Drain walls.

Vibrated Cement concrete M15 using 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost and conveyance of all materials to site and all labour charges for machine mixing, laying in position,Compacting, Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1500,1700, 2100 (5th Revision) (For Vent Portion).

Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge for foundations

Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2200 (4th revision ) and as directed by the Engineer-in-Charge for Bed blocks & Backing walls (Sub-structure) Without Form work

Centering and scaffolding charges - RCC vertical walls of plane surfaces (Rate is for both sides centering) including open drains

Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P etc., complete as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2300 (5th revision ) and as directed by the Engineer-in-Charge for Deck slab /Top Slab

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) steel bars below 36 mm of Fe - 500/500D grade (as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work in all floors.(APSS No.126). (In the absence of 18G binding wire, 2 Nos of 20G binding wire in tandem are to be strictly adhered).

Earth Work Excavation for Ordinary Soil-Manual Means with initial lift of 3 mts for foundations and depositing on bank for all lifts and with an initial lead of 50mts including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc., complete for finished item of work excluding dewatering chargese etc., as per SS 20B (APSS 308) as directed by the departmental officer during execution

Filling with sand (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (BLD-CSTN 2-8) (APSS No:309 & 310) as per Circular Memo No:20938/SoR/DCE(B)/EE (B) /DEE (B)/AEE/2019, Dt.14-05-2019

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.).110 mm dia pvc pipe (8 Kgs/cm2)

Manufacture, Supply and Delivery of House service connections (PP Saddle)PP Clamp saddles-PP clamp Saddles shall be manufactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded-in with Nickel plated Brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and nut-bolt-washer with SS. The PP Clamp saddle fittings shall be mouldedwith SS 304/Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS-554/ISO-7. Adequate thickness of PP shall be provided to hold brass insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS. Fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 from their certified laboratories like NSF International Ltd. UK and certificate of Compliance to be produced for the following parameters: i) Odour & Flavour of water ii) Appearance of water iii) Growth of Micro Organism iv) Extraction of Substances that may be of concern to public health (Cyto toxicity) v) Extraction of Metals excluding all taxes.

Supply, installation, and testing of UPVC water Piping with 6mm Nitrile Rubber class "O" Insulation covered with interwoven glass cloth protection. Necessary pipe fittings (including enlarger, bends, TJoints etc) has to be considered to connect the UPVC drain pipe to cast iron floor trap..as per the directions of the Engineer-in-Charge

Manufacture, Supply and Delivery of Supply of 20mm PPR Ball Valve conforming to DIN Standards 8077/8092 conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.as per the directions of the Engineer-in-Charge

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Geological survey charges for drilling of bore well excluding taxes

Drilling of Tube/Borewells by down the hole hammer to a finished diameter of 163mm dia in all formations/straaus such as medium hard rock formation, consolidationformations etc., including drilling in over burdern soils to a diameter of not less then 200mm including insetion of 180mm diameter including the insetion of unplasticized PVC Pipe with work pressure not less than 6 kg/sqm as casing pipe confirming to IS Specification No. 4966/1988 with ISI Mark up to depth as directed by the department and flushing 8 hours for Bore development conducting yield test including transportation of drilling rigs supporting vehecles including crew charges and all other charges as required etc., complete all done to the satisfaction of the Department and as stipulated in the technical specification to theis schedule but excluding the cost of PVC Casing pipes,couplings and cap, the entire work should be carried out as per IS 28000 part I and II/1979. The rate is exclusive of all taxes in rural and urban areas. For Depth of Drilling upto 90mts

Drilling of Tube/Borewells by down the hole hammer to a finished diameter of 163mm dia in all formations/straaus such as medium hard rock formation, consolidationformations etc., including drilling in over burdern soils to a diameter of not less then 200mm including insetion of 180mm diameter including the insetion of unplasticized PVC Pipe with work pressure not less than 6 kg/sqm as casing pipe confirming to IS Specification No. 4966/1988 with ISI Mark up to depth as directed by the department and flushing 8 hours for Bore development conducting yield test including transportation of drilling rigs supporting vehecles including crew charges and all other charges as required etc., complete all done to the satisfaction of the Department and as stipulated in the technical specification to theis schedule but excluding the cost of PVC Casing pipes,couplings and cap, the entire work should be carried out as per IS 28000 part I and II/1979. The rate is exclusive of all taxes in rural and urban areas. For Depth of Drilling upto 90mts-150mts

Supply, delivery and fixing of 250mm diameter PVC pipes with working pressure of 6 kg/sqcm as casing pipe for borewells confirming to IS Specification No. 4958/1988 with ISI mark.inclusive of CED and Cess but excluding GST

Supply, delivery and fixing of 180mm diameter PVC pipes with working pressure of 6 kg/sqcm as casing pipe for borewells confirming to IS Specification No. 4958/1988 with ISI mark.inclusive of CED and Cess but excluding GST

PVC Borecap suitable for 180mm dia PVC pipe used for borewells . The rate exclusive of all taxes.

Supply and Transportation of 7.50HP, 20-24 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha/Falcon

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor. Voltmeter ;. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab Ammeter Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab Single phase preventor Makes: L&T / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.

S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes : As per list of recommended brands as category I Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/ Gloster/ Goldmedal / GM/ Finecab/ Million

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size

Supply of 63A 415V Porcelain Rewirable Fuse Units. Makes : As per list of recommended brands. Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal /GM/ Benlo /Anchor

Labour charges for the erection of submersible pump set with all accessories and running the pump set in good condition etc. complete upto 150 m depth using tripad and chain block etc., complete.

Supply & Fixing of 180 mm dia M.S Bore Cap including cost and conveyance of all materilas to the work site and labour charges for fixing etc., complete.

Supply,delivery and fixing of 50mm wide M.S Clamps including cost of nuts, bolts, screws, labour charges for fixing including cost and conveyance of all materilas to the work site etc., complete.

Supply & Fixing of 50mm dia G.I Long Bend including cost and conveyance of all materilas to the work site and labour charges for fixing etc., complete.

Supply & Fixing of M.s flanges of 50mm dia

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.).110 mm dia pvc pipe (8 Kgs/cm2)

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. PN 1.6 (MPa)

Labor charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.

Laying and jointing of HDPE pipes by butt fusion welding as per IS: 7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure etc.

(a)Providing 11KV line works with required distribution transformers, erection of 9.1/11 mts PSCC poles and stringing of 3 phase , 5 wire LT lines with suitable channels , cross arms and insulators as per APSPDCL norms. (b) Providing Electrification in SHV Layout charges for Service line , Development charges towards payment to APSPDCL. (C) Providing for Street lights with required accessories in SHV layout.