Work of installation of 02 high mast 16m and 03 solar lights for lighting in District Joint Hospital and Surgical Complex

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect as per direction of E/I. PWD SOR S.I. No. 652/2018 ( Make - Utkarsh / bajaj / Philips or its equivalent)

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and RequiredT&P completee in all respect.SOR SI NO641/18

Supply and fixing of factory wried integral LED flood light luminaires having die cast aluminium body and diffuser with driver set suitable for 170 TO 200 Watt. Confirming to IP 66 and above Protection complete in all respects CAT- AAA PWD SOR S.I. No. 1455/2018 ( Make - Philips / crompton / wipro or its equivalent)

Supply & Installation of all in one 30-40 watt auto cut solar LED Street Light with stand complete specification as per direction of E/I. complete in all respect. Battety 30 Ah li-fe p04, battery insatll inbuilt, LED Light 40 watt. light out put 5800 to 6500 K installation hight 6 to 7 mtr. Duty cycle 8 to 12 hours and backup up to 2 days on site warranty 5 year (PSR)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.PWD SOR S.I. No. 501/2018 ( Make - gloster / havells / universal / polycab or its equivalent) 16sq. mm 4 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-incharge. PWD SOR S.I. No. 503/2018 16 sq. mm

Supply and burying of 40mm dia x 4.5 meters long G.I. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled up to 2 meter from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) up to switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. PWD SOR S.I. No. 701/2018

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. DSR S.I. No. 14.15.1/2022 63 mm dia (OD-63 mm & ID-51 mm nominal) @(127 X 0.7746=98.36)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. PWD SOR 807/2018 25 A TPN

S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect.PWD SOR 305/2018 (make - L&T / siemens / havells or its equivalent)