Decoration Work of Chowk Ghantaghar and Shaheed Sthal Near Dainik Jagran office.

SITC of BIS approved under IS 10322 part 5/sec 5 RGBW (W=3000K/4000K) IP66 rated (Square/Rectangle/ Circular) shape Projector Light 48W. Product should have highly thermal efficient aluminium Pressure Die Cast(ADC 12) along with clear Toughened glass with impact tresisitance IK07. Product should have Lumen 1920 lumen with efficacy > 40 Lumen /Watt when all LED are in ON condition. Product should have different beam angle ( Narrow Beam/ Medium Beam/ Wide beam/ elliptical beam) Lens, made of VDE/ UL approved UV resistant, non yellowing PC material. Product Should be equipped with 8bit/ 16 bit DMX 512 based decoder or data processing device with in the product maintaing same IP rating.Product should be equipped with BIS approved IP65/67 rated Constant Voltage Power Supply. Product should be operational on 240V AC without any extrenal/ remote led driver.Product should have CLASS I electrical safety. Product should have IP67 rated industrial grade locked moulded cable connector for DMX signal. Product should be equipped with LED of reputed LED manufacturer CREE/ OSRAM. LED's LM80 should declare >50,000 @ 85ºC. Product ambient temperature should be (-10ºC to 50ºC). LM80/ BIS report / certificates should be provided at time of supply.

SITC of BIS approved under IS 10322 part 5/sec 5 RGBW (W=3000K/4000K) IP66 rated (Square/Rectangle/ Circular) shape Projector Light 36W. Product should have highly thermal efficient aluminium Pressure Die Cast(ADC 12) along with clear Toughened glass with impact tresisitance IK07. Product should have Lumen 1440 lumen with efficacy > 40 Lumen /Watt when all LED are in ON condition. Product should have different beam angle ( Narrow Beam/ Medium Beam/ Wide beam/ elliptical beam) Lens, made of VDE/ UL approved UV resistant, non yellowing PC material. Product Should be equipped with 8bit/ 16 bit DMX 512 based decoder or data processing device with in the product maintaing same IP rating.Product should be equipped with BIS approved IP65/67 rated Constant Voltage Power Supply. Product should be operational on 240V AC without any extrenal/ remote led driver.Product should have CLASS I electrical safety. Product should have IP67 rated industrial grade locked moulded cable connector for DMX signal. Product should be equipped with LED of reputed LED manufacturer CREE/ OSRAM. LED's LM80 should declare >50,000 @ 85ºC. Product ambient temperature should be (-10ºC to 50ºC). LM80/ BIS report / certificates should be provided at time of supply.

SITC of BIS approved under IS 10322 part 5/sec 5 RGBW (W=3000K/4000K) IP 66 rated (Square/Rectangle/ Circular) shape Projector Light 18W. Product should have highly thermal efficient aluminium Pressure Die Cast(ADC 12) along with clear Toughened glass with impact tresisitance IK07. Product should have Lumen 720 lumen with efficacy > 40 Lumen /Watt when all LED are in ON condition. Product should have different beam angle ( Narrow Beam/ Medium Beam/ Wide beam/ elliptical beam) Lens, made of VDE/ UL approved UV resistant, non yellowing PC material. Product Should be equipped with 8bit/ 16 bit DMX 512 based decoder or data processing device with in the product maintaing same IP rating.Product should be equipped with BIS approved IP65/67 rated Constant Voltage Power Supply. Product should be DC 24Vrated and operational on 240V AC witt any extrenal/ inbuilt remote led driver.Product should have CLASS III electrical safety.Product should have IP67 rated industrial grade locked moulded cable connector for DMX signal. Product should be equipped with LED of reputed LED manufacturer CREE/ OSRAM. LED's LM80 should declare >50,000 @ 85ºC. Product ambient temperature should be (-10ºC to 50ºC). LM80/ BIS report / certificates should be provided at time of supply.

SITC of BIS approvedwith RGBW (W=3000K/ 4000K) IP66 rated Linear Wall Washer Light 15W. Product should have highly thermal efficient Extruded aluminium with Die casted end caps. Product should have clear Toughened glass with impact resisitance IK07. Product should have Lumen output 600 lumen with efficacy > 40 Lumen /Watt when all LED are in ON condition. Product should have different beam angle ( Narrow Beam/ Medium Beam/ Wide beam/ elliptical beam) Lens, made of VDE/ UL approved UV resistant, non yellowing silicon material. Product Should be equipped with 8bit/ 16 bit DMX 512 based decoder or data processing device with in the product maintaing same IP rating.Product should be equipped with BIS approved IP65/67 rated Constant Voltage Power Supply. Product should be rated DC 24V and operational on 240V AC with any extrenal/ remote led driver. Product should have CLASS III electrical safety.Product should have IP67 rated industrial grade locked moulded cable connector for DC voltage supply. Product should be equipped with LED of reputed LED manufacturer CREE/ OSRAM. LED's LM80 should declare >50,000 @ 85ºC. Product ambient temperature should be (-10ºC to 50ºC). LM80/ BIS report / certificates should be provided at time of supply.

Supply, installation, testing & Commissioning of Signal Booster/Splitter with 8Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC. The splitter should be of same make as the fixtures and the controller should be BIS approved.

Supply, installation, testing & Commissioning of DMX Special cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacketCable. Beldon make or equivalent.

Supply, installation, testing & Commissioning of IP67 power supply 24V output. Power consumption- 200W

Supply, installation, testing & Commissioning of enclosure for Power Supply, Splitter, DMX Controller : Plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035

Electrical items like cable, conduit,panel,connectors, junction boxes extra required for the commisioning & Installation

Timer Based Light Control Panel: SITC of Wall/ Floor mounted CPRI tested Timer Based Light Control Panel (Feeder Pillar) with rated Al. Bus Bar suitable for 415V, 3 phase, 4 wire, 50 Hz, power supply distribution system. The panel shall be double door conforming to IP 54. The painting process shall conform to relevant IS code for out door application.

O/G : 20A FP MCB - 4 Nos. + 20A SP MCB - 3 Nos.

Complete Set of Feeder Pillar as above"

Shaheed Sthal Near Dainik Jagran office.

Decorative Street light with 05 Meter Pole (Supply & Installation)

Bolard Light (Supply & Installation)

Please Enable Macros to View BoQ information