Providing and laying prepainted CGI sheet roofing over existing type-III qtr. (behind DIC office building) at Kullu (dismantling GI sheet and P/L CGI sheet roofing and truss work).

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:GS Sheet including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge

P/F precaoted galvanised iron profile sheets 0.50mm total coated thickness with zinc coating 120gm per sqm as per IS:277,in 240mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns.Sheet should have protective guard film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer-In-Charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55mm)with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces excluding cost of purlins,rafters and trusses and i/c cutting to size and shape wherever required including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge

Providing ridges or hips of width 60cm overall width plain GS sheet fixed with polymer coated J or L hooks ,bolts and nuts 8mm dia GI limpet and bitumen washers complete 0.63mm thick with zinc coating not less than 275gm/sqm including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

Steel work in built up sections/framed work, i/c cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel as required (a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

(b) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

GI metal ceiling lay in plain tegular edge global white colour tiles of size 595X595mm and 0.50mm thick with 8mm drop made of GI sheet having galvanising of 100gms/sqm and electro statically polyster powder coated of thickness 60 microns i/c factory painted after bending including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge

P/F on wall face PVC ( D-plast) rain water pipes for working pressure not less than 4.5 kg/ sqm i/c filling the joints with approved adhesive complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge (a) 100mm dia pipe

P/F m.s. holder bat clamps of approved design to CI & SCI pipes including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge- 100mm dia

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size) including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge.

AMBIKA ENTERPRISES (BID ID -503612)

MANOHAR SINGH (BID ID -502228)

RANDHIR JAMWAL (BID ID -502428)

ADARSH THAKUR (BID ID -502410)

Vinay Kumar (BID ID -503610)

Biri SIngh (BID ID -503121)

Pawan Kumar (BID ID -502026)