SPECIAL REPAIRS TO BLDG NO P-574 ( OR MD ACCN) OF 13 GARH RIF AND PROVN OF PAVER BLOCK FLOORING NEAR BLDG No P-146 AT PANGODE MIL STN TRIVANDRUM

Amount

Material and labour for surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil.

Material and labour Plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub base in 100mm thick all as specified.

Material and labour for sand filling/cushioning under floors or in foundations including watering and consolidation.

Material and labour for machine pressed precast concrete interlocking coloured paver block of any shape and size confirming to IS 15658-2006 of 100mm thickness , M-50 Grade with grey cement and pigment.

Material and labour for PCC type B1 1:2:4 ( 20 mm graded aggregate in kerbs or mud stops rounded or chamfered edges etc complete.

Material and labour for removing excavated surplus soil removing from drainage to a distance n.exc 50 m and depositing where directed at a level n. exe 1.5 m above the starting point.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed.

Material and labour for 20 mm thick granite (of any type) work (tabled rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform over a screed bed of cement mortar (1:6) including pointing in white cement of using marble dust with admixture of pigment to match with shade of granite including edges griding and polihing complete or as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified.

Material and labour for 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces as backing coat for tiles all as specified.

Material and labour for Non skid ceramic tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.11 Sqm but not exceedng 0.18 sqm, as in floors etc, set and jointed neat cement slurry and pointed with colour cement to match all as specified and directed

Material and labour for Glazed ceramic tiles in verticle surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and as directed.

Material and labour for 15 mm thick screed bed in cm 1:6 for laying floor finishes (Upto four storey building) all as specified.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, complete all as specified and directed .

Supply and fix Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed by Engr-in-charge.

Supply and fix Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed .

Supply and fix Aluminiumanodised, Butt hinges 100mm long complete all as specified and directed .

Supply and fix Aluminium handles, cast type, anodised of size 125 mm long, complete all as specified and directed .

Supply and fix 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed .

Supply and fix 3mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed .

Material and labour for Hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty etc, complete all as specified and directed .

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, (fixed in repairs), complete all as specified and directed

Supply and fix PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, (fixed in repair) (Each opening n.exc 1.50mtr, contained with a pair of clamps and a pair of side ornamental attachments) complete all as specified.

Taking down cement plaster, any description, on brick or stone walls or concrete surface, etc. including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed .

Material and labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cm 1:4 ,finished even and smooth (without using extra lime or cement) all as specified and directed.

Material and labour for Preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash, complete all as specified and directed .

Material and labour for Preparing new plastered surface of wall ,priming with chalk whiting and applying two coats of OBD all as specified and directed

Material and labour for Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling, finished even and smooth w/o using extra cement, complete all as specified and directed .

Material and labour for Preparation of new plastered or unplastered surfaces in ceiling and applying two coats of white wash,complete all as specified and directed

Material and labour for Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed

Material and labour for Applying one coat of acrylic exterior emulsion water proofing painting including prepartion of old surfaces of wall (up to four storey bldg) as per manufactures instructions ) all as specified and directed

Material and labour for Washing,rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper to wall including preparation of surfaces all as specified and directed

Material and labour for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (upto four storey building).

Material and labour for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (upto four storey building). all as specified and directed

Material and labour for brooming down and preparing old surfaces of walls and applying one coat of white wash on old decorated surfaces all as specified and directed

Material and labour for Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred Iron doors ladders, framed balusters, walk ways railings, frame work of water tanks and similar works concorming to Fe-290, Gde E-165, (fixed in repair) complete all as specified and directed .

Material and labour for Preparation of new steel surfaces of any description not otherwie described, over 10 cm width or girth and applying two coats of synthetic enamel paint over red oxide, complete all as specified and directed

Supply and fix Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections including 20mm bore ball valve brass with polyethylene float and fly nut and dismantling existing water tank of any capacity and removing from site. complete all as specified and directed .

Material and labour for Vitreous china coloured wash down water closet pan (Padestal Pattern), (fixed in repair), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed

Supply and fix in repairs for viterous china, squating pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVC 'P' or 'S' trap and cement concrete and jointing to flush pipe complete all as specified and directed.

Supply and fix in repair 10 ltr capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends,complete all as specified and directed.

Supply and fix 15mm bore UPVC tubing including taking down the pipe etc complete all as specified and directed

All as per item No 42 here-in-before but for 20 mm dia bore

Supply and fix in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls/ floors including necessary brackets all as specified and directed (Upto four storey building) all as specified and directed

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed

Material and labour for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate)finished even and smooth without using extra cement all as specified and directed

Supply and fix Glass dividing strips, 3mm thick 38mm width complete all as specified and directed.

Material and labour for 40 mm thick, plain cement concrete, M-15 (Nominal Mix), type B-1 (using 12.5 mm graded crushed stone aggregates) as in floors surfaces finished smooth & even to receive floor finishes, complete all as specified and directed .

Demolition of stone/boulder masonry built in cement mortor all as specified and directed

Material and labour for Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM 1:4 all as specified and directed .

Supply and fix in repair PVC connection 15mm dia 450mm long with 02 Nos brass check nuts with washer etc complete all as specified

Supply and fix in repair Bib tap fancy type chromium plated 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed

Supply and fix 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (fixed in repair), complete all as specified and directed .

Supply and fix Sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever bracketsand connecting union to pipe,over all size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified and directed .

Demolition of reinforced cement conrete of any description and in any positon complete all as specified and directed.

Material and labour for RCC type B1 1:2:4 (20mm graded aggregate) as in cover slabs chajjas shelves and similar work complete all as specified and directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Material and labour for Form work to sides and soffit of floor or roof beams, ,beam haunching, lintel, beam, shelves including supports overhangs etc all as specified and directed

Supply and fix Plastic water closet seat, black or white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device fixed in repair complete all as specified and directed.

Supply and fix in repairs Stop valve 15 mm dia, fancy type chromium plated screwed down, high pressure with long shank and cup screwed both ends for unions and fixed, all as specified .

Material and labour for Roughening of surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc and brrushing neat cement slurry with 3 kg of cement per sq metre.

Material and labour for rendering in CM 1:3, 10 mm thick mixed water proofing compound finished even and smooth without using extra cement. Note : Water proofing compound will be measured and paid seperately.

Material and labour for APP modified water proofing membrane weighing not less than 3.0 Kg/ Sqm reinforcement weighing not less than 100 gms / sqm having softening point not less than 140 degree celsius, longitutudinal tensile stength not less than 300 N / Sqcm, tearing strength of 100 Nm by torch application including minium 10 cm side lap and 15 cm end laps over acoat of Bituminous emelson @ 100gms / Sqm on planted surface and hot blown bitumen 85 /25 grade @ 1.20 kg / Sqm and finishing with solar refelective Bituminous aluminum paint applied 100 gms /sqm including dismantling and removal of exisiting unserviceable membrane all as specified by Engr-in-charge .

Supply only integral water proofing compound

Taking down shutters of any description not exceeding 1.00 Sqm each and removing from site, complete all as specified

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed

Material and labour for 2nd class hard wood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seaso-ned and chemically pressure treated, 35 mm thick fitted to chowkats, complete all as specified and directed

Material and labour for 2nd class hard wood factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) all as specified and directed

Material and labour for IInd class hard work plain, solid, straight chowkats and frames, wrought, framed, worught, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

Material and labour for Bands, straps, supports or stays for rainwater, ventilating pipes, for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large, gates, hook and staples, chains, hand made sliding bolts, clamps, hold fasts,plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified.

Material and labour for 2nd class hard wood glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass or gauge, etc( without sash bars) edge of framing plain chamfered or rounded fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (b) for window shutter supplying and fitted to chowkats, complete all as specified and directed.

Material and labour for Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Material and labour for Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Supply and fix in repair Mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed.

Material and labour for 18/19mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

Supply and fix 100mm Hasp and staple, safety type with aluminium anodised including bolt to hinge plate and fixed with screws all as specified and directed

Supply and fix Aluminium handles, cast type, anodised of size 100 mm long, complete all as specified and directed.

All as per item no 77 here-in-before but for 150 mm long

Supply and fix in repair Mild steel cold rolled Butt hinges, medium weight,100 mm long, complete all as specified and directed.

Supply and fix Aluminium, anodised, barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed .

All as per item No 80 here-in-before but for 150 mm long

Supply and fix in repair Mild steel cold rolled Butt hinges, medium weight,75 mm long, complete all as specified and directed.

Supply and fix in repairs Grating doom 100mm dia of PTMT(minimum weight 25gms) fixed in repair complete all as specified and directed.

Shilpa Engineers and Contractors

JEETH CONSTRUCTION

AKASH CONSTRUCTIONS