REPAIRS TO BRICK WORK FALSE CEILING ROOF LEAKAGE OF CERTAIN BLDS OF GARDEN CITY COD ROAD DEMPSY ROAD UNDER AGE BR EAST GE DEHU ROAD

Amount

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as specified and directed.

Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level) complete all as specified and directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for . complete all as specified and directed.

Taking down cement plaster of any description of brick or stone wall etc incl ranking out joints and hacking for key, scrubbing down with water etc complete. complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement. complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on new fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.

M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. complete all as specified and directed.

M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls. complete all as specified and directed.

S & F Pre- painted galalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. complete all as specified and directed.

All as per item No 11 above but Plain galvalume sheet fix in valley gutter / ridge complete all as specified and as directed.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. complete all as specified and directed.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and acoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specified and as directed.

M&L for false ceiling with 10mm thick of panel size 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed.Make: Gyproc or Equivalent

M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

S & F for MS work as Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; in wind tie or any other work incl cutting, drilling holes complete all as specified and as directed.

S&F rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.

M&L granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting, moulding and mirror polishing etc complete.

M&L granite tile 20mm thick machine cut in dado/ skirting laid over cement screed and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting, moulding and mirror polishing etc complete.

M & L of 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 50mm thick sand layer watering and ramming all as specified. complete all as specified and directed.

M& L Chequered Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. complete all as specified and directed.

M & L cement concrete type B-1 , 1:2:4 (20mm graded agg) 40 mm thickness in Surface chanel, complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement complete all as specified and as directed.

M & L cement concrete type B-1 , 1:2:4 (20mm graded agg) 25 mm thickness in sub base for leveling course complete all as specified and as directed.

M & L for taking out old water proofing treatment from roof including cement screed bed and applying water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge :- (a) Rendering 10mm thick in cement mortar 1:4 using water proofing compound @ 3% of weight of cement on RCC roof slab, finished even & smooth without using extra cement (b) The roof surface shall be thoroughly wire brushed cleaned to eliminate all sharp projection, washed, dried up and cleaned of all foreign material and dust to receive primer. (c) On the dried plastered surface, one coat of approved bituminious primer @ 0.25 Kg/Sqm shall be applied. (d) On this primered surface, APP modified bituminous membrane with non woven polyster mat reinforcement weighing not less than 3 Kg/Sqm with plain finish shall be laid by torch application method (e) The overlap while torching shall be 100mm on transverse direction and 75mm on longitudinal direction. (f) Top surface shall be applied with bituminious aluminium paint (g) The treatment shall be carried as per manufacturer’s instructions and removal and roughening of existing treatment if any may be done before application of above as directed by Engineer-in-charge. (for Six Esh shed only)

Providing and carrying out water Proofing treatment to toilet, sunken slabs, wet areas ets, after proper surface prepration, carry out cementitious injection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification paint complete all as specified and directed.

M&L for cement concerete 1:3:6 Type C-2 (Using 40 mm graded stone aggregate) as in surface channel and drain bed complete all as specified and as directed.

Extra for forming fair finished drain or channel up to 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.

M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in coping/ edging complete all as specified and as directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Ditto as above but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thick PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S/F 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S&F Anodised aluminium Powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters,(three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for vitrified coloured tiles 7 to 8 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete. complete all as specified and directed.

Ditto above item No 47 above but on skirting over 10 mm th rendering in CM 1:4 complete. complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 mm x 200mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced. complete all as specified and directed.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No 51 above but on skirtings incl 10 mm th rendering in CM (1:4) complete. complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr , etc.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltr , etc.

Fixing only in repair Ball brass valve, high pressure, with polythene float horizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 15 mm bore complete all as specified and as directed.

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

H S TAKHI

DR J S CHADHA AND SONS

Shri Sant Cosntruction

RAMESH PATIL

KARPE AND SONS CONSTRUCTION

Star Construction

M/S B.A. GAIKWAD

M/S OMKAR DEEPAK DHAVAN