Loading
Loading…
Loading…
Tender Value
₹22.9 Cr
EMD Value
₹22.9 L
Closing Date
6 Oct 2026, 6:00 pm
Executive Engineer, R & B Division, Godhra
(Package) (1) Construction of Hostel building at Vinzol Godhra for Shri Govind Guru University Ta. Godhra & (2) Proposed Construction of Amenity Centre at Vinzol Godhra for Shri Govind Guru University Ta. Godhra Dist. Panchmahal. (Deposit work)
346521
12 OF 2026-27
Open
Civil Works - Buildings
Works
Panchmahal
3 documents required · 3 mandatory
₹18,000
EXECUTIVE ENGINEER, R & B DIVISION, GODHRA
₹22.9 L
18 Sept 2026
18 Sept 2026
18 Sept 2026
6 Oct 2026
18 Sept 2026
No. Figure Amount
Civil works items
1 Excavation for foundation upto 1.50 mt depth including sorting out and 2758.00 Cum 149.67
stacking of useful materials and disposing the excavated stuff for all lead
and lift for loose or soft soil.
2 Excavation for foundation depth from 1.5 mt. to 3.0 mt. including sorting 920.00 Cum 162.38
out and stacking of useful materials and disposing the excavated stuff for
all lead and lift for all sorts of soil.
3 Excavation for foundation depth from 3.0 mt. to 5.0 mt. including sorting 1839.00 Cum 273.54
out and stacking of useful materials and disposing the excavated stuff for
all lead and lift for all sorts of soil.
4 Filling in foundation and plinth with sand in layers of 20 cm. thickness 204.00 Cum 460.19
including watering ramming and consolidating etc. complete.
5 Filling available excavated earth (excluding rock) in trenches plinth side 2575.00 Cum 130.39
of foundation etc. in layer not exceeding 20 cm in depth consolidation
each deposited layer by ramming and watering etc. complete.
20 cm thickness including watering, ramming and consolidation etc.
7 Providing and laying of permanent piping technology anti termite 1744.00 Sq.m. 197.96
treatment before flooring work by installing LLDP (Low Linear Density
Polyethylene) tube of 8mm O.D.& 6.4 mm I.D. with inbuilt pressure
compensation chip every 30 cm interval in the tube, having working
pressure of 2 kg/cm2 and release rate of 1.9 ltr/hour fixed by p-clips and
nails. The LLDP pipe shall be installed at the entire periphery of the
building and at internal network of building at a depth of 20 to 200 mm
under floor at every 2 to 3 Rmt. c/c distance (adjusted as per building
layout) & ends of loop pass through a PVC elbow of minimum 32 mm ID
at junction box and the loop shall termite in junction boxes & test every
junction during injecting chemicals for termite control treatment. The anti-
termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part-3) shall
ne injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of
water at the rate 2 kg/sq.cm @ 5 ltr/SMT. Permanent pipe system with
Junction boxes (only Pipe network) including Anti termite chemical
injected area (chemical injecting including labour cost) the contractor
shall submit approved line plan for piping system and
junction boxes dully approved by engineer-in-charge with
bond of 5 year warranty. (As per Gov. G.R. SOR/1018/715/C-1
Part file Dt.24/06/2019).
8 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 454.00 Cum 3137.06
6 stone aggregate 40 mm nominal size) and curing complete excluding
cost of form work in foundation and plinth.
9 Providing and laying controlled cement concrete M-250 and curing 1574.00 Cum 4440.86
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Foundations, footings base
of columns & mass concrete.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
10 Providing and laying controlled cement concrete M-250 and curing 271.00 Cum 6861.02
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns upto plinth.
11 Providing and laying controlled cement concrete M-250 and curing etc. 120.00 Cum 6861.02
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Ground floor.
12 Providing and laying controlled cement concrete M-250 and curing etc. 92.00 Cum 6900.13
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for First floor.
13 Providing and laying controlled cement concrete M-250 and curing etc. 70.00 Cum 6939.24
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Second floor.
14 Providing and laying controlled cement concrete M-250 and curing etc. 68.00 Cum 6978.34
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Third floor.
15 Providing and laying controlled cement concrete M-250 and curing etc. 68.00 Cum 7017.45
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Fourth floor.
16 Providing and laying controlled cement concrete M-250 and curing etc. 33.00 Cum 7056.56
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Terrace floor.
17 Providing and laying controlled cement concrete M-250 and curing 340.00 Cum 5746.78
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Ground beams.
18 Providing and laying controlled cement concrete M-250 and curing 195.00 Cum 6068.30
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in beams for Ground floor.
19 Providing and laying controlled cement concrete M-250 and curing 159.00 Cum 6107.41
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in beams for First floor.
20 Providing and laying controlled cement concrete M-250 and curing 5.00 Cum 10863.81
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Double height beams for
First floor.
21 Providing and laying controlled cement concrete M-250 and curing 155.00 Cum 6146.52
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in beams for Second floor.
22 Providing and laying controlled cement concrete M-250 and curing 8.00 Cum 10902.92
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Double height beams for
Second floor.
23 Providing and laying controlled cement concrete M-250 and curing 155.00 Cum 6185.62
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in beams for Third floor.
24 Providing and laying controlled cement concrete M-250 and curing 155.00 Cum 6224.73
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in beams for Fourth floor.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
25 Providing and laying controlled cement concrete M-250 and curing 16.00 Cum 6263.84
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in beams for Terrace floor.
26 Providing and laying controlled cement concrete M-250 and curing 55.00 Cum 7460.79
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintels for Ground floor.
27 Providing and laying controlled cement concrete M-250 and curing 47.00 Cum 7499.90
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintels for First floor.
28 Providing and laying controlled cement concrete M-250 and curing 46.00 Cum 7539.00
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintels for Second floor.
29 Providing and laying controlled cement concrete M-250 and curing 46.00 Cum 7578.11
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintels for Third floor.
30 Providing and laying controlled cement concrete M-250 and curing 46.00 Cum 7617.22
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintels for Fourth floor.
31 Providing and laying controlled cement concrete M-250 and curing 16.00 Cum 7656.33
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintels for Terrace floor.
32 Providing and laying controlled cement concrete M-250 and curing 43.00 Cum 8059.61
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajjas for Ground floor.
33 Providing and laying controlled cement concrete M-250 and curing 33.00 Cum 8098.72
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajjas for First floor.
34 Providing and laying controlled cement concrete M-250 and curing 29.00 Cum 8137.82
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajjas for Second floor.
35 Providing and laying controlled cement concrete M-250 and curing 29.00 Cum 8176.93
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajjas for Third floor.
36 Providing and laying controlled cement concrete M-250 and curing 29.00 Cum 8216.04
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajjas for Fourth floor.
37 Providing and laying controlled cement concrete M-250 and curing 7.00 Cum 8255.14
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajjas for Terrace floor.
38 Providing and laying controlled cement concrete M-250 and curing 234.00 Cum 6127.90
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for Ground floor.
39 Providing and laying controlled cement concrete M-250 and curing 174.00 Cum 6167.01
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for First floor.
40 Providing and laying controlled cement concrete M-250 and curing 25.00 Cum 9963.60
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Double height Slab for First
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
41 Providing and laying controlled cement concrete M-250 and curing 168.00 Cum 6206.12
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for Second floor.
42 Providing and laying controlled cement concrete M-250 and curing 50.00 Cum 10002.71
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Double height Slabs for
Second floor.
43 Providing and laying controlled cement concrete M-250 and curing 168.00 Cum 6245.22
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for Third floor.
44 Providing and laying controlled cement concrete M-250 and curing 168.00 Cum 6284.33
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for Fourth floor.
45 Providing and laying controlled cement concrete M-250 and curing 52.00 Cum 6323.44
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Slabs for Terrace floor.
46 Providing and laying controlled cement concrete M-250 and curing 72.00 Cum 6475.72
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in RCC Walls upto plinth.
47 Providing and laying controlled cement concrete M-250 and curing 32.00 Cum 6475.72
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in RCC Walls for Ground floor.
48 Providing and laying controlled cement concrete M-250 and curing 29.00 Cum 6514.83
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in RCC Walls for First floor.
49 Providing and laying controlled cement concrete M-250 and curing 28.00 Cum 6553.94
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in RCC Walls for Second
50 Providing and laying controlled cement concrete M-250 and curing 28.00 Cum 6593.04
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in RCC Walls for Third floor.
51 Providing and laying controlled cement concrete M-250 and curing 28.00 Cum 6632.15
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in RCC Walls for Fourth floor.
52 Providing and laying controlled cement concrete M-250 and curing 23.00 Cum 6671.26
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in RCC Walls for Terrace
53 Providing and laying controlled cement concrete M-250 and curing 29.00 Cum 7231.01
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in STAIRCASES for Ground
54 Providing and laying controlled cement concrete M-250 and curing 21.00 Cum 7270.12
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in STAIRCASES for First floor.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
55 Providing and laying controlled cement concrete M-250 and curing 21.00 Cum 7309.22
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in STAIRCASES for Second
56 Providing and laying controlled cement concrete M-250 and curing 21.00 Cum 7348.33
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in STAIRCASES for Third
57 Providing and laying controlled cement concrete M-250 and curing 21.00 Cum 7387.44
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in STAIRCASES for Fourth
58 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 735365.00 Kg. 77.59
including bending, binding and placing in position upto all floor two level
for all floors.
59 Providing and laying brick work using common burnt clay building 443.00 Cum 4021.02
conventional type bricks having crushing strength not less than
Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement :
fine sand) including the cost of all materials and labour charges etc.
60 Providing and laying brick work using common burnt clay building 589.00 Cum 4289.33
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level upto floor two level in
cement mortar 1:6 (1 cement : 6 fine sand) for Ground Floor including
the cost of all materials and labour charges etc. complete.
61 Providing and laying brick work using common burnt clay building 229.00 Cum 4329.82
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1
cement : 6 fine sand) for First Floor including the cost of all materials and
labour charges etc. complete.
62 Providing and laying brick work using common burnt clay building 216.00 Cum 4370.31
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1
cement : 6 fine sand) for Second Floor including the cost of all materials
and labour charges etc. complete.
63 Providing and laying brick work using common burnt clay building 187.00 Cum 4410.80
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1
cement : 6 fine sand) for Third Floor including the cost of all materials
and labour charges etc. complete.
64 Providing and laying brick work using common burnt clay building 187.00 Cum 4451.29
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1
cement : 6 fine sand) for Fourth Floor including the cost of all materials
and labour charges etc. complete.
65 Providing and laying brick work using common burnt clay building 131.00 Cum 4491.78
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level in cement mortar 1:6 (1
cement : 6 fine sand) for Terrace Floor including the cost of all materials
and labour charges etc. complete.
66 Providing and laying half brick work using common burnt clay building 610.00 Sq.m. 715.04
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos. of
6mm diameter mild steel round bars after every three coarse embedded
in cement mortar in super structure above plinth level for Ground floor
including the cost of all materials and labour charges etc. complete.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
67 Providing and laying half brick work using common burnt clay building 985.00 Sq.m. 721.04
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos. of
6mm diameter mild steel round bars after every three coarse embedded
in cement mortar in super structure above plinth level for First floor
including the cost of all materials and labour charges etc. complete.
68 Providing and laying half brick work using common burnt clay building 985.00 Sq.m. 727.04
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos. of
6mm diameter mild steel round bars after every three coarse embedded
in cement mortar in super structure above plinth level for Second floor
including the cost of all materials and labour charges etc. complete.
69 Providing and laying half brick work using common burnt clay building 985.00 Sq.m. 733.04
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos. of
6mm diameter mild steel round bars after every three coarse embedded
in cement mortar in super structure above plinth level for Third floor
including the cost of all materials and labour charges etc. complete.
70 Providing and laying half brick work using common burnt clay building 985.00 Sq.m. 739.04
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos. of
6mm diameter mild steel round bars after every three coarse embedded
in cement mortar in super structure above plinth level for Fourth floor
including the cost of all materials and labour charges etc. complete.
71 Providing 20 mm thick double coat mala cement plaster on interior brick / 3527.00 Sq.m. 270.43
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding, curing etc.
complete for Ground floor.
72 Providing 20 mm thick double coat mala cement plaster on interior brick / 2343.00 Sq.m. 296.36
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding curing etc.
complete for First floor.
73 Providing 20 mm thick double coat mala cement plaster on interior brick / 2281.00 Sq.m. 322.30
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding curing etc.
complete for Second floor.
74 Providing 20 mm thick double coat mala cement plaster on interior brick / 2281.00 Sq.m. 348.24
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding curing etc.
complete for Third floor.
75 Providing 20 mm thick double coat mala cement plaster on interior brick / 2281.00 Sq.m. 374.17
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding curing etc.
complete for Fourth floor.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
76 Providing 20 mm thick double coat mala cement plaster on interior brick / 610.00 Sq.m. 400.11
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trowel including scaffolding curing etc.
complete for Terrace floor.
77 Providing 10 mm thick cement plaster in single coat for interior plastering 1591.00 Sq.m. 140.16
on ceiling and soffits of stairs upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for Ground floor.
78 Providing 10 mm thick cement plaster in single coat for interior plastering 1025.00 Sq.m. 140.16
on ceiling and soffits of stairs upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for First floor.
79 Providing 10 mm thick cement plaster in single coat for interior plastering 996.00 Sq.m. 164.97
on ceiling and soffits of stairs upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for Second floor.
80 Providing 10 mm thick cement plaster in single coat for interior plastering 996.00 Sq.m. 189.79
on ceiling and soffits of stairs upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for Third floor.
81 Providing 10 mm thick cement plaster in single coat for interior plastering 996.00 Sq.m. 214.60
on ceiling and soffits of stairs upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for Fourth floor.
82 Providing 10 mm thick cement plaster in single coat for interior plastering 108.00 Sq.m. 239.42
on ceiling and soffits of stairs upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) for Terrace floor.
83 Wall painting with premium acrylic emulsion paint of (two coats) interior 13323.00 Sq.m. 95.95
grade, having VOC (Volatile Organic Compound) content less than
grams/ litre of approved brand and manufacture including applying
additional coats wherever required to achieve even shade and colour for
all floors.
84 Ceiling painting with premium acrylic emulsion paint of (two coat)interior 5712.00 Sq.m. 101.51
grade, having VOC (Volatile Organic Compound) content less than
grams/ litre of approved brand and manufacture, including applying
additional coats wherever required to achieve even shade and colour for
all floors.
85 Applying two coats (white cement based) or acrylic lapy- putty & two 19035.00 Sq.m. 40.59
coats of primer of approved brand and manufacture on new wall surface
to give an even shade including thoroughly brushing the surface free
from mortar dropping and other foreign matter and sand papered smooth.
86 Providing 20 mm thick double coat mala cement plaster on interior brick / 7433.00 Sq.m. 276.96
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 cement :
coarse sand) finished with trovel including scaffolding curing etc.
87 Providing and applying a medium grain textured finish designed to be 7433.00 Sq.m. 1440.26
anti mould siloxane modified acrylic coating for exteriors imported water
88 Providing 20mm thick water proof cement plaster using water proofing 2184.00 Sq.m. 272.70
powder 1 Kg/1 bag of cement for all floors on brick / concrete wall work
using water proofing materials in C.M. 1:4 (1 cement : 4 coarse sand)
including finishing with a floating coat of neat cement slurry etc. complete
for all floors and shall be guaranteed for minimum period of 10 years
after handing over the completed building by the main contractor to be
finished as directed. Stamp paper guarantee 10 years to be furnished
before receiving any payment from the client etc. complete as directed
by Engineer in charge. (i) Inside of basement wall, Toilet vertical wall &
RCC O.H. tank
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
89 Providing cement vata (10 cm x 10 cm size) quarter round in cement 1455.00 Rmt. 23.68
mortar 1:1 including neat cement finishing, watering etc. complete.
90 Providing & fixing the Chicken mesh - 20 guage (Crimp Jali) of approved 2077.00 Sq.m. 61.61
size applying between the RCC and masonry junction in proper line,
level and plumb with all material, labour, tools, tackles and equipment
including fixing the jali with nails etc. complete as directed by the
Engineer-in-charge.
91 Providing and fixing partly panelled and partly glazed for double doors 21.60 Sq.m. 5410.57
and clearstory windows including using Wooden Teak Wood frame of
size 120 mm x 70 mm with door having side hung double shutter having
premium quality of factory made 35 mm. thick solid core flush door
finished with 4 mm thick veneer on both sides with 6 mm thick plain
glass, fixed with bedding patti and 6 turn spider cylindrical lock {Godrej or
equivalent), SS handle size 60 cm long, Tower bolt size 20 cm etc. as
per detail colour & pattern approved by this office including necessary
anodized alluminum fixtures and fastenings.
92 Providing and fixing door having side hung single shutter / double leaf 893.00 Sq.m. 5492.38
having premium quality of factory made 35 mm. thick solid core flush
door finished with 4 mm thick veneer on both sides with 6 Lever Mortice
lock {Godrej or equivalent), Door closers (Heavy type of 765 number)
Hardware or Everite Prabhat or equivalent SS aldrop, SS handle size
cm long, tower bolt size 20 cm etc. as per detail colour & pattern
approved by this office including necessary anodized alluminum fixtures
and fastenings for all floors.
93 Providing and fixing premium quality French UPVC factory made colour 478.00 Sq.m. 14098.29
sliding three track window of Fenesta make, made of extruded profiles.
Profiles of frames and sash will be metered cut and fusion welded at all
corners including drilling of holes for fixing hardware and drainage of
water etc. making arrangement for fixing of hardware, EPDM gasket,
± 0.2mm thick galvanised steel profile to be inserted in required profile,
frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all
complete as per direction of Engineer-in-charge. The rates inclusive of
mm glazing and mosquito net with hardware hinges and fitting etc. for all
94 Providing and fixing premium quality French UPVC factory made 21.00 Sq.m. 6736.70
coloured fix window of Fenesta make, made of extruded profiles. Profiles
of frames and sash will be metered cut and fusion welded at all corners
including drilling of holes for fixing hardware and drainage of water etc.
making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm
thick galvanised steel profile to be inserted in required profile, frame will
be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as
per direction of Engineer-in-charge. The rates inclusive of 5 mm glazing
and hardware hinges and fitting etc. for all floors.
95 Providing and fixing premium quality French UPVC factory made 25.44 Sq.m. 6765.99
coloured adjustable louvers with box frame of Fenesta make, made of
extruded profiles. Profiles of frames and sash will be metered cut and
fusion welded at all corners including drilling of holes for fixing hardware
and drainage of water etc. making arrangement for fixing of hardware,
EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted
in required profile, frame will be fixed to the wall with 8 mm x 100 mm
long fasteners, all complete as per direction of Engineer-in-charge. The
rates inclusive of 3 mm bajari glass, hardware hinges and fitting etc. for
all floors.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
96 Providing and fixing safety grills of required pattern for windows / 17019.00 Kg. 105.85
Ventilator / Door using M.S polished bars / pipes / M.S. angles / flats of
size and at required spacing as per drawings as per design and hold
fasting with coach bolts including one coat of primer and two coats of
matt finished oil painting etc. complete.
97 Providing and laying 600 mm x 600 mm Anti skid matt finished tiles 984.00 Sq.m. 1914.96
flooring over 20 mm (average) base of cement mortar 1:6 (1 cement :
coarse sand) on new surface with 4 mm spacer and epoxy filling &
cleaning the surface etc. complete as per detail approved by Architect /
Engineer in charge.
98 Providing and laying 600 mm x 600 mm G.V.T. Glossy tiles 8mm to 2400.00 Sq.m. 1737.20
10mm thick in skirting, risers of steps and dedo on 10mm thick cement
plaster 1:3 (1 cement : 3 coarse sand) on new surface with 4 mm spacer
and epoxy filling & cleaning the surface complete as per detail approved
by Architect / Engineer in charge.
99 Providing & laying 1200 mm x 1200 mm full body GVT tiles 8mm to 4207.00 Sq.m. 2289.67
10mm thick flooring over 20 mm (average) base of cement mortar 1:6 (
cement : 6 coarse sand) on new surface with 4 mm spacer and epoxy
filling with 7.5 cm skirting & cleaning the surface etc. complete as per
detail approved by Architect / Engineer in charge.
100 Providing & laying 1200 mm x 1200 mm G.V.T. Glossy tiles 8mm to 219.00 Sq.m. 2222.00
10mm thick in skirting, risers of steps and dedo on 10mm thick cement
plaster 1:3 (1 cement : 3 coarse sand) on new surface with 4 mm spacer
and epoxy filling & cleaning the surface complete as per detail approved
by Architect / Engineer in charge.
101 Providing and laying polished kota stone slab 25mm thick in risers of 27.00 Sq.m. 1121.48
steps, skirting, dedo and pillars laid on 10mm thick cement mortar 1:3 (1
cement : 3 coarse sand) and jointed with gray cement slurry mixed with
pigment to match the shade of slab including rubbing and polishing etc.
complete. (A) 25mm thick
102 Providing and laying machine cut free edges machine double polished 665.00 Sq.m. 656.50
Kota stone for shelves in cupboard and walls in single piece (Maximum
1.50 mt.) 25 mm including cutting grooves in walls and fixing the stone
with neat cement slurry in true line and level as per drawings and design
supplied by architect and instruction given by authority and E.I.C. etc.
complete for shelves and cupboard.
103 Providing and laying polished Kota stone slab flooring over 20mm 398.00 Sq.m. 976.72
(average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or
L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with
grey cement slurry mixed with pigment to match the shade of slab
including rubbing and polishing etc. complete. (A) 25mm thick
104 Providing and laying Ceramic tiles 6mm thick in skirting risers of steps 11.00 Sq.m. 995.81
and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)
and jointed with white cement slurry.
105 Providing and laying Machine cut 16mm to 18mm thick granite in single 448.00 Sq.m. 3354.21
piece with all free edges rounded double moulding, machine polished in
landing, tread and riser including and 1 cm double nosing and necessary
groove as per design on 20 mm thick cement mortar 1:6 (1 cement :
coarse sand) on treads & 10 mm thick cement mortar 1:3 for risers,
jointed with grey cement slurry including rubbing and polishing with
colour and design approved by Architect / engineer in charge etc.
106 Providing and fixing 15mm thick quartz white artificial marble counter for 74.00 Sq.m. 3282.50
basin including making necessary grooves in walls and jointing with
adhesive of approved quality and full moulding the edges with necessry
labour & material etc complete.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
107 Providing and fixing sand which type Granite platform including supplying 27.00 Sq.m. 6145.85
and fixing granite stone 16 to 18 mm thick mirror polished 1st quality
granite stones in top and side position and vertical strip at front over
mm thick polished kotah stone platform fixing in top and sides and
intermediates supports fixing with cement mortar and adhesive and
finishing including cutting for fixing of sink any size (As per drawings and
design supplied by architect and instruction given by authority and E.I.C.)
at required position etc. complete.
108 Providing and fixing 16mm to 18mm thick of approved quality of Granite 24.00 No. 1362.49
urinal partition in single piece of size 0.62 x 1.20 mt. in cement mortar
1:1 (1 cement : 1 coarse sand) and finishing with white cement including
polishing on both sides, finishing edges with round shape etc. complete.
Rate includes for all lead & lift & as per directed by Engineer in charge.
109 Providing and fixing machine cut, free edges, pre mirror polished Granite 1367.00 Sq.m. 2137.16
stone slab 16mm to 18mm thick for Doors & windows cill, jambs &
cladding as per design including full moulded round front edge and 1cm
nosing on 15 mm thick cement mortar 1:3 (1 cement : 3 coarse sand)
jointed with grey cement slurry including rubbing, polishing & finishing
etc. complete.
110 Providing and fixing machine cut free edges, premirror polished Granite 36.00 Sq.m. 2168.47
stone slab 16mm to 18mm thick in single piece for ventilation cill, jambs
& cladding as per design including full moulded round front edge and
1cm nosing on 15 mm thick cement mortar 1:6 (1 cement : 6 coarse
sand) jointed with grey cement slurry including rubbing, polishing &
finishing etc. complete.
111 Providing and laying broken china mosaic flooring for terrace using 12 3105.00 Sq.m. 1078.65
mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar
1:3 to plain or slope and to be tempered to bring mortar creme out upto
surface using white cement including rounding off junctions and
extending them upto 15 cm along the wall, clearing with water and oxalic
acid etc. over cement concrete flooring 1:2:4 (1-cement : 2-coarse sand :
4-graded stone aggregate 20mm nominal size) laid in one layer (A)
Average 40mm thick.
112 Providing and fixing 90 cm high Stainless steel railing made from 173.00 Rmt. 6538.74
anticorrocive 304 grade S.S. pipe of 50 mm dia (16 gauge) as hand rail
with S S 304 grade baluster of 38 mm dia (16 gauge) as a vertical
support fixed in RCC slab at 1.2m c/c including 8 mm thick toughen glass
glazing as per design approved by Architect fixed by 18.75 mm dia (16
gauge) S S pipe with baluster including accessories as per detailed
drawing as directed etc. complete.
113 Providing and fixing GRC-glass reinforced concrete screen, beam, pillar 382.00 Sq.m. 7783.06
in approved design, pattern, sizes and colour to be fixed on existing
structure of MS or RCC. The GRC should be made from ‘53 grade’
cement , quartz, fine silica sand, alkali resistant glass fiber, super
plasticizers, polymers and U.V. resistant synthetic inorganic pigments
should be used for pigmentation. the material casting should take place
in FRP mould or equivalent. The fixing of grc should be ‘dry fixing’ as per
the drawings approved by engineer in charge. Approved make- everest
GRC and the fixing and erection shall be done by the manufacturer or
approved vendor of manufacturer.
114 Providing and fixing 150 mm high and upto 260 mm deep GRC-glass 92.00 Rmt. 3775.38
reinforced concrete carving screen, beam, pillar in approved design,
pattern, sizes and colour to be fixed on existing structure of MS or RCC,
quartz, fine silica sand, alkali resistant glass fiber, super plasticizers,
polymers and U.V. resistant synthetic inorganic pigments should be used
for pigmentation. The material casting should take place in FRP mould or
equivalent. The fixing of GRC should be ‘dry fixing’ as per the drawings
approved by engineer in charge. Approved make- everest GRC and the
fixing and erection shall be done by the manufacturer or approved
vendor of manufacturer. Carving work.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
115 Providing 20mm thick sand faced cement plaster on walls upto height 10 70.00 Sq.m. 329.29
metres above ground level consisting of 12mm thick backing coat of
C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1
cement : 1 sand) etc. complete.
116 Filling in foundation and plinth with brick bats chhara in layers of 20cm. 336.00 Cum 600.56
thickness including watering, ramming and consolidating etc. complete.
117 Steel work, welded in built up sections framed work including cutting, 4405.00 Kg. 90.48
hoisting, fixing in position and applying a priming coat of read lead paint.
(A) In beams and joists, channels angles Tees, flats, with connecting
plates or angle cleats as in main and cross beams. Hip and jack rafters,
purlins connected to common rafters and the like.
Providing & fixing of reinforcement bars after drilling the hole of required -
diameter & depth, cleaning of the same, providing / filling the hole with
Injection Mortar (HIT HY 150r of Hilti or approved equivalent), inserting
reinforcement bar etc. complete as per Manufacturers & architects
instruction. The work shall be carried out by the technical
workmens/agency approved by the manufacturer and under technical
supervision of Manufacturer of Injection grout including all materials, tool
tackles, labour etc. completed as directed by E.T.C/PMC. Rate shall be
included required testing like pull-out etc. & over all design shall be
measured forces by structural design consultant. Rate includes for all
lead & lift & as per directed by EIC.
118 for 20 mm. dia. bar - Holes 25mm dia. Depth 200mm 50.00 No. 791.84
119 for 16mm. dia. bar - Holes 20mm dia. Depth 160mm 50.00 No. 438.34
120 for 12 mm. dia. bar - Holes 14mm dia. Depth 120mm 50.00 No. 183.82
121 for 10 mm. dia. bar - Holes 12mm dia. Depth 100mm 100.00 No. 155.54
122 for 8 mm. dia. bar - Holes 12mm dia. Depth 100mm 100.00 No. 134.33
123 Making holes upto 50mm dia. 300mm long in any RCC members by 20.00 No. 477.73
diamond Core Cutting machine of HILTI or equivalent including
disposing the debries etc complete. Rate includes for all lead & lift & as
per directed by Engineer in charge.
124 Making holes upto 100mm dia. 300mm long in any RCC members by 20.00 No. 709.02
diamond Core Cutting machine of HILTI or equivalent including
disposing the debries etc complete. Rate includes for all lead & lift & as
per directed by Engineer in charge.
125 Making holes upto 150mm dia. 300mm long in any RCC members by 20.00 No. 886.78
diamond Core Cutting machine of HILTI or equivalent including
disposing the debries etc complete. Rate includes for all lead & lift & as
per directed by Engineer in charge.
126 Providing & fixing anchor fasteners of Fischer make or approved 20.00 No. 195.94
equivalent including drilling in RCC / Masonary members, fastening with
structural steel members etc complete. Rate includes for all lead & lift &
as per directed by Engineer in charge. (a) 8 mm dia. 110 mm long
127 Providing & fixing anchor fasteners of Fischer make or approved 22.00 No. 231.29
equivalent including drilling in RCC / Masonary members, fastening with
structural steel members etc complete. Rate includes for all lead & lift &
as per directed by Engineer in charge. (a) 10 mm dia. 110 mm long
128 Providing & fixing anchor fasteners of Fischer make or approved 24.00 No. 328.25
equivalent including drilling in RCC / Masonary members, fastening with
structural steel members etc complete. Rate includes for all lead & lift &
as per directed by Engineer in charge. (a) 12 mm dia. 110 mm long
129 S.S. Name plate :- Providing and fixing in position 150 mm high, 450 mm 50.00 No. 1363.50
wide English letters made from 1.0 mm thick stainless steel sheet as
directed by Engineer in charge with all necessary tools & plants etc.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
130 Providing and fixing Structural Glazing with spiders using the 17 Micron 65.00 Sq.m. 4227.86
anodised of approved colour alluminium section as transium, mullium of
size 63mm x 38mm x 2 mm with using 6 mm thick reflective structural
glass of approved make, colour, toughned and shade and fixed with
silicone sealant and spacer tap and at corner sealed neoprene foam dust
and Air sealed gasket mirred including scaffolding, cleaning of glass etc.
complete at all heights and lifts with all necessary fitting and fixtures,
anchore fasteners, necessary M.S. or Aluminium brackets, suitable
design for openable window as per Architectural drawing and as directed
by Engineer-in-charge. Grooves between the glasses to be filled with
sealant of Dow corning - structural sealant 995, weather sealant
The entire facade should be water proof. The mullions are to be
connected to bracket by SS-304 nut bolts. Measurement shall be given
as per actual execution of the work.
131 Providing and fixing in expansion joint 100 mm thick SIL FLEX (Capcell 144.00 Sq.m. 2982.06
HD 100) expansion joint board of best quality and approved make
including cutting to required size and shape at all levels etc. complete as
132 Applying and providing Expansion joint sealing system on 100 mm vide 37.00 Rmt. 4775.03
joint including cleaning of expansion joint by mechanical means provision
of adhesive and flexible membrane with required bond length as per
manufacturer specification and 4mm thick alluminium strip covering with
one side slotted and bolted with suitable system, inclusive of all
manpower, machinery and material as per specification and as directed.
133 Dewatering by pumping set of required capacity including temporary 4500.00 HP / 18.55
platform carting pumping at site and fixing the same in position including Hr
all accessories, and fuel and labour etc. complete.
134 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 1175.00 Rmt. 41.00
135 Providing and fixing rolling shutters of approved make made of 80mm 21.00 Sq.m. 3503.41
wide M.S. laths inter- locked together through their entire length and
jointed together at the ends by end locks mounted on specially designed
pipes haft with bracket plates, guide channels and arrangements for
inside and outside locking with push-pull operation including the cost of
hood cover and spring etc. complete.
136 Providing and fixing 10 mm thick multiwall polycarbonate roofing sheet 37.00 Sq.m. 1569.54
lexan / layer UV resistant fixed with hilti screw and rubber silicon sealer
and alluminium strip of size 50 mm x 3 mm etc. complete as directed by
Engineer in charge.
SANITARY FIXTURES & FITTINGS
137 Providing and fixing wash down water closet (European type, W.C. Pan) 77.00 Each 1303.71
with integral P or S trap including jointing the trap with soil pipe in cement
mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and
paid for separately) (A) vitreous china pattern (i) in white colour
138 Providing, fixing and testing heavy duty brass flush cock with lever & 77.00 Each 1245.33
washer system including cutting holes in walls and making good with all
fittings complete.
139 Providing and fixing G.I. inlet connection for flush pipe with W.C. pan. 77.00 Each 40.56
140 Providing and fixing plastic seat and cover for wash down water closer 77.00 Each 291.33
with C.P. brass hinges and rubber buffers. (B) Black plastic seal and
141 Providing and fixing toilet paper holder. (A) C. P. Brass 77.00 Each 414.73
142 Providing and fixing 600mm x 450mm bevelled edge mirror of superior 106.00 Each 833.73
glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to
wooden plug with C.P. brass screws and washers.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
143 Providing and fixing wash basin with single hole for pillar tap with C.I. or 106.00 Each 1385.07
M.S. brackets painted white including cutting holes and making good the
same but excluding fittings. (A) Vitreous China:(ii) Flat Back wash basin
550 mm x 400mm size. (i) In white colour.
144 Providing and fixing pillar tap, capstan head, screw down high pressure 106.00 Each 354.69
with screws, shanks and back nuts. (ii) 20mm dia. as directed by
Engineer in charge.
145 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 4.00 Each 2280.27
including cutting holes in walls and making good the same but excluding
fittings. (C) Vitreous China Sink. (i) 600mm x 450mm x 150mm size.
146 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm 110.00 Each 89.83
147 Providing and fixing Rubber plug for sink or wash basin. 106.00 Each 17.15
148 Providing and fixing chromium plated, bottle trap with necessary 106.00 Each 295.80
couplings of approved quality for wash basin.
149 Providing and fixing screw down bib taps of following size.(A) Brass 10.00 Each 214.81
screw down bib tap polished bright. (ii) 20mm dia.
150 Providing and fixing C.P. brass towel rail complete with C.P. brass 106.00 Each 603.19
brackets fixed to wooden plugs with C.P. brass screws. (B) 600mm x
20mm size.
151 Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket 106.00 Each 521.93
and guard rail complete mixed to wooden plug with C.P. brass screws.
152 Providing and fixing Urinal of approved quality including connection with 8.00 Each 1554.36
trap and with integral longitudinal flush pipe. (A) Squating plate pattern
white earthenware 550mm x 300mm.
153 Providing, fixing and testing of approved make Urinal flush valve 8.00 Each 3757.20
154 Providing, fixing and testing of C.P. brass Angle Cock of 15 mm nominal 118.00 Each 1111.00
bore for wash basin, sink from approved make conforming to IS:8931,
155 Providing, fixing and testing of jet spray for WC, with flexible pipe 77.00 Each 388.85
connection to angle cock complete
156 Providing, fixing and testing of C.P. brass two way single lever Bib Cock 77.00 Each 2153.32
of 15 mm nominal bore from approved make with wall flange, aerator etc.
157 Providing and fixing Soap Dish from approved make with necessary 51.00 Each 1274.62
holes/ grooves in wall and making it well finished etc. complete.
158 Providing and fixing liquid soap dispenser in Glass Bottle with all 102.00 Each 996.87
necessary accessories and fittings confirming to manufacturers
specifications and including drilling holes in the walls, inserting rawal
plugs, fixing the dispenser to the wall with screws, complete and making
good from approved make complete.
159 Providing, fixing and testing of C.P. brass Bath Mixer with spout, bend 51.00 Each 2676.50
pipe, overhead wall shower etc. from approved make complete.
160 Providing & fixing C.P. brass Double coat Hook from approved make 51.00 Each 353.50
completed as per provided drawings by architect, technical specification
and as directed by the authority EIC.
161 Providing, fixing and testing of C.P. brass Sink Faucet with swinging 4.00 Each 1313.00
casted spout wall mounted model including cutting and making good the
walls wherever required as per drawings, technical specification and as
directed by EIC.
WATER SUPPLY PIPING
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
162 Providing and fixing ball cock of approved quality as directed. (A) Copper 8.00 Each 132.89
Metal (i) 25mm dia.
163 Providing and fixing ball cock of approved quality as directed. (A) Copper 52.00 Each 189.84
Metal (ii) 50mm dia.
164 Providing laying and jointing in true line and level I.S.I. mark 15mm dia. 500.00 Rmt. 72.65
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials. (For internal
water supply)
165 Providing laying and jointing in true line and level I.S.I. mark 25mm dia. 280.00 Rmt. 91.84
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials. (For internal
water supply)
166 Providing, laying and jointing in true line and level I.S.I. mark 32mm dia. 185.00 Rmt. 119.15
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials. (For internal
water supply)
167 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 285.00 Rmt. 148.12
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials. (For internal
water supply)
168 Providing, laying and jointing in true line and level I.S.I. mark 50mm dia. 160.00 Rmt. 195.67
U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by
Engineer in charge. Pipe shall be fixed on the wall with the help of clamp
at every two metre C/C or shall be concealed as directed including
necessary fittings etc. including testing of pipe and joints and fixing the
same with adhesive solvent, including cost of all materials. (For internal
water supply)
169 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. 160.00 Rmt. 169.24
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. (A) 15 mm dia. (For internal hot water supply)
170 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. 160.00 Rmt. 205.00
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. (B) 20 mm dia. (For internal hot water supply)
171 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. 120.00 Rmt. 249.72
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. (C) 25 mm dia. (For internal hot water supply)
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
172 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. 80.00 Rmt. 333.66
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. (D) 32 mm dia. (For internal hot water supply)
173 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. 140.00 Rmt. 442.04
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. (E) 40 mm dia. (For internal hot water supply)
174 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. 160.00 Rmt. 653.77
mark C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation
(NSF) seal for potable water of following dia. nominal bore tube fittings
and clamps including making good the wall, ceiling and floor etc.
complete. (F) 50 mm dia. (For internal hot water supply)
175 Providing, fixing and testing of high pressure rated (not less than 16 3.00 Each 4292.50
Kg/sqcm) brass Float Valve of Honeywell or approved equivalent make
with copper ball float and brass rods of required length with all fittings
etc. complete. 50mm
176 Providing, installation and testing of heavy quality C.P. brass Air Release 3.00 Each 2920.92
Valve of Honeywell or approved equivalent make with screwed / flanged
ends etc. complete. 25mm
177 Providing, fixing, testing and commissioning of C.I. Non return dual plate 3.00 Each 4236.95
pn 16 valve (IS 5312) of specified diameter as per technical
specifications and directions of the project manager. The rate shall
include providing & fixing of gaskets 6mm thick and reducers. 50mm
178 Providing and fixing cast iron 'Y' strainer of Honeywell or approved 3.00 Each 3219.88
equivalent make, with flanged end connections of PN10 minimum
pressure rating including epoxy coating of cast iron body, EPDM
gaskets, Stainless steel filter screen, temperature range of 10°C to
°C, suitable to pipes of following sizes, all complete. 50mm
179 Pressure reducing valve 2.00 Each 6554.90
Providing, fixing and testing, heavy quality pressure reducing valves of
approved make, with comprising of 3 nos gun metal ball valves on inlet &
outlet & 1 no. Ball valve for bypass, 1 no pressure reducing valve with
flanged connection,1 nos pressure gauge on outlet, including brass
strainer, flanges / unions, nuts, bolts, washers, etc. complete for water
supply lines of the following nominal bore (nb) size: the upstream water
pressure may be upto 15 kg/cm2 max. and downstream pressure min.
1.5 kg/cm2,as per technical specifications & detail mention in drawing
and directions of the project manager. 50mm dia.
INTERNAL DRAINAGE SYSTEM (SOIL, WASTE AND RAIN WATER
180 Providing, laying and jointing in true line and level I.S.I. mark 110 450.00 Rmt. 835.15
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on
wall using of PVC clamp of the size 110 mm diametre x 149 mm length x
145 mm heigh at every 2000 mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends, shoes
etc. including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials. (For Soil & Waste Water)
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
181 Providing, laying and jointing in true line and level I.S.I. mark 160 295.00 Rmt. 831.22
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on
wall using of PVC clamp of the size 160 mm diametre x 210 mm length x
196 mm heigh at every 2000 mm center to center or shall be concealed
in walls as directed including necessary fittings such as bends, shoes
etc. including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials. (For Rain Water)
182 Providing and fixing in position cowel vent to pipes. (C) 100mm dia. as 20.00 Each 501.87
183 Providing and fixing single socketed rigid UPVC pipes of approved make 190.00 Rmt 414.10
and 4 kg/cm2 working pressure, conforming to IS : 13592 Type A,
including all fittings, bends, elbows etc. jointing of pipes & fittings with
suitable seals conforming to IS: 5382, clamping, cutting & making good
the walls/ floors etc. complete. (For Basin drain) 40mm
184 Providing and fixing single socketed rigid UPVC pipes of approved make 145.00 Rmt 151.50
and 4 kg/cm2 working pressure, conforming to IS : 13592 Type A,
including all fittings, bends, elbows etc. jointing of pipes & fittings with
suitable seals conforming to IS: 5382, clamping, cutting & making good
the walls/ floors etc. complete. (For Sink & Urinal drain) 50mm
185 Providing and fixing S.S. 316 grating of below mentioned size & 186.00 Each 974.65
specification of approved design including setting in floor with cement
(white/gray) mortar to match with floor finish as per architect requirement
& suitable for waste and floor drain. Complete requirement as per
drawing, BOQ, specification & as directed by EIC/Architect. 150 x
150mm 3 piece anti cockroach jali with 100mm dia. strainer.
186 Providing and fixing, testing and commissioning of Multi floor trap self 186.00 Each 1356.43
cleaning & Minimum Water seal 50 mm require, including cost of cutting
and making good the walls and floors, embedded in 1:2:4 concrete, fixing
of floor trap with necessary arrangements with proper care at all levels,
protecting fittings and floor trap till the final handing over etc. as per
technical specifications and directed by the Project Manager. 50 mm inlet
and 75 mm outlet_Multi floor trap for Waste Water.
187 Making khurras 45 x 45 cm with average minimum thickness of 5 cm 14.00 Each 3565.30
cement concrete of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x
micron, finished with 12 mm cement plaster of mix 1:3 (1 cement :
coarse sand) and a coat of neat cement, rounding the edges, making &
finishing the outlet etc. complete.
EXTERNAL DRAINAGE SYSTEM
188 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2- 8.00 Each 11029.97
coarse sand : 4-graded stone aggregate 20mm nominal size) foundation
concrete 1:3:6 mix (1-cement : 3- coarse sand : 6 Brick bats 40 + 50mm
size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-
coarse sand) finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 mix (1-Cement : 2-Coarse sand :4-
stone aggregate 20mm nominal size) finished smooth complete including
curing and fasting (i) Inside size 900mm x 1200mm and 1.5M. deep
including C.I. cover with frame size 560mm diameter total weight of
cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and
Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using
brick having crushing strength not less than 35Kg. / Sq.cm. in Cement
Mortar 1:5 (1 cement : 5 coarse sand) (1) A type depth 0.90 Metre for
150mm diameter sewer.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
189 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement:2- 5.00 Each 19330.46
coarse sand : 4-graded stone aggregate 20mm nominal size) foundation
concrete 1:3:6 mix (1-cement : 3 coarse sand : 6 Brick bats 40 + 50mm
size) inside plastering 15mm thick with cement mortar 1:3 (1-Cement : 3-
coarse sand) finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand : 4-
stone aggregate 20mm nominal size) finished smooth complete including
curing and fasting (i) Inside size 900mm x 1200mm and 1.5M. deep
including C.I. cover with frame size 560mm diameter total weight of
cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and
Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using
brick having crushing strength not less than 35Kg. / Sq.cm. in Cement
Mortar 1:5 (1- Cement : 5-Coarse sand) (2) B type depth 1.50 Metre for
150mm diameter sewer.
190 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- 5.00 Each 23441.74
coarse sand : 4-graded stone aggregate 20mm nominal size) foundation
concrete 1:3:6 mix (1 cement : 3- coarse sand : 6-Brick bats 40 + 50mm
size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-
coarse sand) finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 mix (1-Cement : 2-Coarse sand :4-
stone aggregate 20mm nominal size) finished smooth complete including
curing and fasting (i) Inside size 900mm x 1200mm and 1.5M. deep
including C.I. cover with frame size 560mm diameter total weight of
cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and
Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using
brick having crushing strength not less than 35Kg. / Sq.cm. in Cement
Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for
150mm diameter sewer.
191 (I) Extra rate for constructing B.B. masonry for every additional depth of 2.00 Each 522.96
0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M.
192 (II) Extra rate for constructing B.B. masonry for every additional depth of 2.00 Each 397.19
0.1M. or Part thereof over item No.24.27 (I) for depth from 1.50M. to
193 (III) Extra rate for constructing B.B. masonry for every additional depth of 2.00 Each 717.88
0.1M. or Part thereof over item No. 24.27 (III) for depth from 2.25M to
194 Constructing brick masonry chamber for underground C.I. Inspection 5.00 Each 3186.86
chamber and bends with bricks having crushing strength not less than
Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm
internal dimensions total weight of cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab
with 1:2:4 mix (1-cement :2- coarse sand : 4 graded stone aggregate
20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating coat of neat cement on
walls and bed concrete etc. complete. (ii) Inside dimensions 500mm x
700 mm and 450mm deep for pipe line with one or two inlets.
195 Providing and fixing S.W. Gully trap with C.I. grating brick masonry 19.00 Each 1246.92
chamber and water tight C.I. cover with frame of 300 mm x 300 mm size
(inside) with standard weight. [i] square mouth trap (B) 150 mm x
mm size P or R type
196 Supplying and fixing C.I. cover 300mm x 300mm without frame for Gully 19.00 Each 496.72
trap (Standard pattern) to weight of cover to be not less 4.53 Kg.)
197 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm 70.00 Each 203.76
and painting with two coats of Anti-corrosive paint etc. complete.
198 Providing, laying (to level or slopes) and jointing reinforced concrete 170.00 Rmt. 248.67
Light duty non-pressure pipes I.S. class NP2 of the following internal
diameter with collars and butt ends prepared for collar joints including
testing of joints complete. (B) 150mm (GT to MH pipe)
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
199 Providing, laying (to level or slopes) and jointing reinforced concrete 220.00 Rmt. 348.02
Light duty non-pressure pipes I.S. class NP2 of the following internal
diameter with collars and butt ends prepared for collar joints including
testing of joints complete. (C) 250mm (MH to MH pipe)
PLANT AND MACHIENERY
200 Providing, erecting and fixing double coated (3 layer) ISI food grade 33500.00 Litre 13.13
water storage tank of required capacity for drinking water (R.O.) storage
with all necessary fittings and connection etc. complete.
201 Full Ht. Wooden Storage (Height - 2100mm) - Laminate Finish Providing 3.00 Smt. 16851.85
& fixing full ht. wooden storage made of 18mm thick prelaminated board
with PVC edge beading as per matching shade. The storage structure
made of 18mm thick prelaminated board with PVC edge beading as per
matching shade. The shutter made of 18mm thick prelaminated board
with PVC edge beading as per matching shade. The necessary
hardware shall be used in standard make. The rate shall be inclusive all
necessary material, labour, transporting etc.
202 Full Ht. Partly Glazed Wooden Storage (Height - 2100mm) - Laminate 44.00 Smt. 16851.85
Finish Providing & fixing Full ht. wooden storage made of 18mm thick
prelaminated board with PVC edge beading as per matching shade. The
storage structure made of 18mm thick prelaminated board with PVC
edge beading as per matching shade. The shutter made of 18mm thick
prelaminated board with PVC edge beading as per matching shade. The
Glass panel shall be provide in Shutter as required. The necessary
hardware shall be used in standard make. The rate shall be inclusive all
necessary material, labour, transporting etc.
203 Single Bed (Size: 1800mm x 900mm) Providing and supply Single bed 246.00 No. 15655.00
with Mattress 1800mm L x 900mm W x 750mm headboard with
combination of Tubular Steel, Particle Board and slatted mattress base
with headboard. Material: Headboard panels are made of 18 mm thick
Pre laminated Particle board. All the exposed edges should be edge
banded with 2 mm thick PVC edge banding. Bed Leg Frame Structure
consists of metal frames made of M.S. 50 x 50 mm box section in
thicknesses. Internal pipes are made of 19 x 19 mm box section in
mm thickness. Headboard pipes are made of 25 x 25 mm box section in
0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA
SHEET Hardware: The High quality hardware should are used.
Construction: Knock down construction Finish: 18 mm thick pre
laminated particle board, Bed leg frame structure is powder coated in
shade To thickness of 50 microns (+/- 10) Rest all metals are powder
coated in shade to thickness of 50 microns (+/-10) The rate shall include
all materials, hardware and labour etc. complete.
Mattress :(L) 1750 x (W) 850 x (H) 100 with 40 density 75 mm thick PU
foam mattress and the zip & stitches for the mattress cover is concealed
with all required assessories and material as per instruction of EIC.
204 (L) 1750 x (W) 850 x (H) 100 The bed is provided with 40 density 75 mm 246.00 No. 7625.50
thick PU foam mattress , it is covered by heavy helium material which is
water proof, flame retardant, vapour & X-ray permeable. The zip &
stitches for the mattress cover i6 is concealed
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
205 Double Bed (Size: 1900mm x 1555mm) Providing and supply double bed 2.00 No. 24997.50
1800mm L x 900mm W x 750mm headboard with combination of Tubular
Steel, Particle Board and slatted mattress base with headboard. Material:
Headboard panels are made of 18 mm thick Pre laminated Particle
board. All the exposed edges should be edge banded with 2 mm thick
PVC edge banding. Bed Leg Frame Structure consists of metal frames
made of M.S. 50 x 50 mm box section in 1.2 thicknesses. Internal pipes
are made of 19 x 19 mm box section in 0.9 mm thickness. Headboard
pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress
holding bkt is made of 0.6 mm CRCA sheet Hardware: The High quality
hardware should are used. Construction: Knock down construction
Finish: 18 mm thick pre laminated particle board, Bed leg frame structure
is powder coated in shade To thickness of 50 microns (+/- 10) Rest all
metals are powder coated in shade to thickness of 50 microns (+/-10)
The rate shall include all materials, hardware and labour etc. complete.
Mattress : (L)1750 x (W)1500 x (H)100 with 40 density 75 mm thick PU
foam mattress and the zip & stitches for the mattress cover is concealed
with all required accessories and material as per instruction of EIC.
206 Office Table (Size: 975mm x 600mm x 750mm) - Laminate Finish 246.00 No. 13635.00
Providing and supply work Table with MDU 1200 x 750 x 750mm Top
mm thick Prelam MDF Board with 2 mm thick PVC edge beading finish.
Leg 18 mm thick Prelam MDF Board with 2 mm thick PVC edge beading.
Drawer & shutter 18mm thick Prelam MDF Board with 2 mm thick PVC
edge beading finish with lock and necessary hardware.
207 Reading Chair (VITA - 1007) Providing and supply fix chair frame 246.00 No. 8231.50
structure made of 25mm thick CRCA MS round pipe with epoxy powder
coated to the thickness of 50 microns, Polypropylene armrest and back
frame with nylon mesh back, seat have be made up of 12 MM +/- 1 MM
thick hot pressed Mr grad plywood on which moulded PU foam mounted
covers with fabric/rexin injection moulded rectangular shape.
208 Three Seater Sofa REDEFINO 4.00 No. 116958.00
Structure ● Providing and supply Sofa made from 18mm Oriented strand
board supported with Maran Solid wood. Seat, Back & Handle "● Foam
100mm-40 Density Premium Quality Foam with 32mm-32 Density Super
Soft premium Quality Foam for Soft touch filling in seat. ● Elastic Belt,
75mm board & 2.25 mm thick elastic webbing stapling in seat frame at
100 mm centre to centre distance, belt faster in X and Y axises of seat,
elastic belt elongation 45% tensile strength 350 kg. ●7 x 7 Sq. Stuck
pattern are placed in the seat, seat Back and handle outside which looks
good. ● Foam 50mm-40 Density Premium Quality Foam with 25mm-32
Density Super Soft premium Quality Foam for Soft touch filling in Seat
Back. ● Foam 50mm-40 Density Premium Quality Foam with 25mm-40
Density Super Soft premium Quality Foam For Soft touch filling in
Handle. ● Foam 11mm-40 Density Premium Quality Foam For Soft touch
filling Outer periphery of sofa." Fabric "● Stiching work done with well
known German brand Gutermann Thread. ● Nylone & Polyster thread
used as per application. "Leg ● Leg made from Stainless steel Elipse
pipe looking purpose, Glossy Mirror Finish with Polymer White Buffer.
209 Providing and fixing steel cupboard frame having standard size and 532.00 Sq.mt. 3086.56
double door shutter of CRS plate of 18 guage and for lock along one
coat of red oxide and two coats of spray oil painting of approved brand
and colour shed and locking arrangement etc. completed as directed by
engineer in charge.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
210 Providing and supplying Wooden Dining table with structure square legs 22.00 No. 55550.00
and structure 2" x 2" with top 60"x 30" (+/-) 1" approximately 18 mm ply
with laminated and six wooden dining chairs with polish with cushion seat
and cushion back (One set = 1 table & six chairs) as per drawing and EIC
211 RCC GSR/Sump : Preparing structural design of RCC underground /
partially underground / above high ground level of required capacity as
per relevant IS standard and constructing the same including excavation
in all type of soil strata including rock including shoring strutting for loose
soil if required/ to protect from collapse casting 100 mm thick PCC,
leveling course in 15 refilling with proper soil and disposing of the surplus
stuff at all lead including cement plaster in CM 1:2 with approved water
proofing compound to all over inside container i.e. wall base, top slab,
dome bottom etc. all including all time of labour and material charges of
lowering laying erecting / hoisting and jointing of pipe assembly to inlet
outlet overflow wash out and bypass arrangement as per hydraulic
design. providing and fixing accessories ci manhole frame and cover,
Glazed tiles at wall & Floor, water level indicator adequate cowl type
ventilator or lentern type ventilator with stainless steel with jalli rcc
chamber of valves .providing and applying 3 coat of cement paint /
snowcem outside surface of structure iit also includes satisfactory water
tightness test as per relavent IS standard and painting name of scheme
and capacity on tank as per direction of engineer in charges.
List of Indian Standards for design of GSR/sump:
Note: The structural design of GSR shall be in accordance wilh
provisions ol relevant Indian Standards
(1) I S 3370 part I & II 2009 or Its latest revision (1.1) I.S. 3370 part III &
IV 1965 or Its latest revision
(2) IS 456-2000 or Its latest revision
(3) IS 1893-2002 part I to V or Its latest revision
(4) IS 13920-1993 or Its latest revision
(5) IS 875 part I to llI,1987 or Its latest revision
General specifications:
(1) water depth in coitainer shall be adopted as per data of tender
capacity shall be calculated excluding free board of reservoir if water
depth is not specified the suitable water depth / ecceptable to field
engineer in acordance with hydraulic.
(2) shape of container in plan specified by in data shall be adoped in
absence circular shapes shall be adopeted
(3) size shall be fixed as per availability of area at site / acceptable to
(4) Effect of overlapping of presssure bulb on soil due nearby structure
and proposed sump shall be considered .
(5) Care shall be taken that no damage should occor to nearby existing
structure compansation shall be paid for the same by the agency.
(6) The Min. concrete grade for RCC shall be M-30. Proportion of
concrete ingredients shall be as per Mix design using weigh batching.
(7) HYSD (Fe 415) or higher grade reinforcing bars confirming to IS
1786/1139 or CRS / TMT bars shall be used as per detailed specification.
(8) Min. size/ thickness of various components shall be provided as per
design criteria / specifications / IS Code (or as per sld. practice) Capacity
of the ESR shall be considered excluding free board.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
(9) The Safe bearing capacity (SBC) /allowable pressure on soil shall be
referred from latest SBC test report or tender datasheet. During
execution If poor soil strata or ground water table is encountered, the
SBC shall have to be re ascertained and the design should be revised
accordingly.
(10) DI pipes & specials shall only be used
(11) The rate shall include cost of dewatering during excavation and
making all arrangement when water table meet within the depth.
(12) The structrue shall be designed to resist the uplift due to ground
water table specified in DATA or actual ground water table or meets
during the excavation if GWT / uplift is mentioned in tender and during
excavation does not meet 7.5% rate shall be reduced.
(13) SS PIPE RAILING SHALL BE PROVIDED over the sump perifery
when sump height is nnmore than 1.5 mt above GL .
(14) RCC stair case with ss railing shall be provided inside reservoir
container bb masonary stair cabin with with ms safety door havinf locking
arrangement to be provide for GSR sump and HGLR of capacity 7.5 lacs
lt with top slab, if dome is constructed at top slab than provide minimum
opening of 900 x 2000 mm with curbing and ss railing around.
(15) apperance of structure should be asthetically good looking
acceptabel to authority.
(16) any change in size depth in gl height above gl can be permitteed in
accpetional case due to site consdition or hydraulic design requirement.
(17) any change in data dimention depth reduction in size if permitted by
competent authority and if it reduces quantity then payment shall be
reduceed pro rate.
(18) when capcity of GSR sump is mpore than 20 lack lit 2 or suitable
compartment acceptable to EE shal be designed andprovided.
(19) agency shall engage qualified consulting enginering for desiging of
structure and he shall visit the site for guidance of work.
(20) 75% of part rate shall be payable or concrete reinforcement and
plastering item of container until satisfactory hydraulic testing or water
tightmenss perform as per tender condition.
(above condition 1 to 20 are part and parcel of tender and prevail over
the other provision in tender.
B. As above with water table sub soil water level above foundation 150000.00 Litre 3.20
capacity of GSR / sump 150000 liter capacity.
B. As above with water table sub soil water level above foundation 10000.00 Litre 4.87
capacity of GSR / sump 10000 liter capacity.
212 Clearing and grubbing road land including uprooting rank vegetation, 2425.00 Sq.m. 2.84
grass, bushes, shrubs, saplings and trees girth upto 300mm removal of
stumps of tress cut earlier and disposal of unserviceable materials.
(A) By Mechanical means in area of light jungle.
213 Providing and laying compacted WBM 200 mm thickness of MCBT Metal 1.00 Cum 1556.41
of size of 40mm to 63mm including spreading and using 25% filler as
sand spreading, watering and consolidation using power roller etc.
214 Providing and laying cement concrete 1:3:6 (1-Cement : 3 Coarse sand 20.00 Cum 3137.06
: 6 graded brick bat aggregate 40 mm normal size) and curing complete
excluding cost of formwork in (A) Foundation and plinth.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
215 Providing and laying Trimix concrete of grade M-25 and finished 1.00 Cum 5773.26
compaction and finishing of cement concrete road by tremix process,
providing extra labour charge for trimix (Vaccum dewatering service)
process on cement concrete road surface by using vaccum dewatering
pump floater surface vibrator including making groove 5mm width and
filling with polyvynile polymer and rough finish to surface as per
instruction including leveling etc. complete.
216 Providing and fixing precast rubber Dye / steel Dye inter locking concrete 192.00 Sq.m. 686.90
block 60mm thick with grade of concrete M-300 pneumatic compressed /
vibrated mechanically and as per approved design confirming to IS
15658 : 2006 including 35 mm sand layer for levelling and filling the joint
with sand in proper line and level as per guidlines of IRC : SP 63-2018
etc. complete.
217 Providing and fixing precast concrete kerb stone of gray cement based 1.00 Rmt. 361.64
concrete block 30cm length, 30cm height and 15cm thick of M-250 grade
concret as per approved design and including excavation for fixing in
proper line and level, filling the joint with C.M. 1:3 (1 cement : 3 fine
sand) etc. complete.
including watering and maintenance of the lawn for 12 months or more
till the grass forms a thick lawn, free from weeds and fit for moving
including supplying farm clay up 300 mm thick, sludge, manure,
pesticides, extra earth, disposal of rubbish, trench excavation and all
labour with lead and lift etc. complete as directed by Engineer in charge.
219 (I) Extra rate for constructing B.B. masonry for every additional depth of 2.00 Each 264.86
0.1M. or Part thereof over item No. 24.27 (ii) for 500 mm x 700mm size.
220 Supplying and fixing reinforced concrete heavy duty non-pressure pipes 2.00 Rmt. 1176.49
with collars for culverts carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M. 1:2 watering and laying
(to level or slopes) of class NP3 of following internal diameters. (ii)
450mm dia.
221 Supplying and fixing reinforced concrete heavy duty non-pressure pipes 1.00 Rmt. 1952.00
with collars for culverts carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M. 1:2 watering and laying
(to level or slopes) of class NP3 of following internal diameters. (ii)
600mm dia.
222 Providing and placing in position 100 mm thick factory made machine 2.00 Nos. 2704.78
batched and machine mixed Precast RCC Rectangular Covers on
drains of footpath of various sizes, of M-25 grade cement concrete for
RCC work, including cost of centering, shuttering, reinforcement of 8 mm
dia. TMT bars of Fe 500 grade at maximum 100mm c/c on both ways,
neat cement punning on finished surface, properly encased on all edges
with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming
coat, reinforcement to be welded at edges with MS sheet and providing
Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads and lift,
handling at site etc. all complete as per direction of Engineer-in-charge
223 Providing and construction 3.00 mt inner dia and 3mt deep soak pit 3.00 Nos. 79698.09
including excavation BBCC, Brick masonary work at bottom and top
including RCC Slab at top in honey combica masonary in mud goober as
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
224 Construction Septic tank inside dimension of 6 m in length & 3 m in width 3.00 Each 148973.99
& 3 m depth including excavating any type of soil as shown and
mentioned in the drawing, providing and laying 0.10 m thick plain cement
concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg.) 40 mm
thick IPS flooring at bottom with brick masonary 0.23 m thick walls CM
1:5 ( 1 cement : 5 coarse sand) and intermediate partition C.M. 1:4 &
RCC Top slabs 12 cms thick in 1:2:4 (1 cement : 2 coarse sand :
graded stone agg) including reinforcement as per design and 15 mm
thick cement plaster in C.M. 1:4 with floating coat of neat cement slurry
inside, top and around tank below 15 cm on ground level, Also provide
two nos CI Manhole frame and cover of size 60 cm x 45 cm & 75 mm
dia. PVC 6 kgf / Sq cm pressure air vent pipe in 3.00 length with cowl etc
complete as per direction of Engineer in charge. (Note :- may be vary as
per invert level)
225 Drilling of 200mm dia. bore in over burden strata in hard rock information 60.00 Rmt. 2777.50
by DTH rig including lowering of pipes and vertically and testing etc.
including testing with Ben Meter. Providing and lowering of 150mm dia.
PVC casing pipe in over burden strata as per IS-4985.Providing and
lowering of 150mm dia. PVC slotted pipe etc. Providing and fixing 50mm
dia. HDPE pipe of standard quality and make as approved by Engineer
in charge including jointing with submersible, lowering the same in bore
with all necessary couplers etc. complete. Providing and fixing bore cap
suitable to 150 mm dia. M.S. pipe with necessary fitting etc. complete.
Supplying submersible pump set for bore of 200 mm. dia. or more having
three phase motor capacity not more than 15 H.P. and having (12 stage)
350 LPM discharge at the head about 160 mtrs suitable for 50 mm dia.
Delivery pipe Cat. III of KBS/ UNEEL/ Kirloskar/ Lubi. Providing and
erecting ISI marked PVC insulated PVC sheathed flat flexible
submersible copper cable approved make of 3 core x 2.5 Sq.mm size.
Charges for development of bore by giving air with compressor for
requirement as per site situation {600 CFM / 150 PSI upto the any depth
minimum 6 hours} Conducting electrological test for bore hole etc.
complete as directed. Water Analysis test in Govt. approved laboratory
including all water testing etc. complete as directed.
226 Constructing RCC Overhead water tank with providing and laying 20000.00 Litre 15.15
controlled cement concrete M-300 mix for R.C.C. work including
reinforcement, boxing, centering, vibrating, PVC water stopper, PVC
Steps, curing and mixed with approved water proofing cement compound
or "CEMWET" or "PIDICRETE LW" integral water proofing admixture as
water proofing agent to be mixed with 50 kgs. bags shall be as
recommended by the manufacture of the water proofing material,
concrete work for top, bottom slab & side pardi for Overhead water tank
item incl. 20 mm thk. water proofing cement plaster in C.M. 1:3 with
smooth finishing & Glazes tile dedo, vata, watering etc. complete to all
face of tank including locking arrangement outlet, inlet, overflow and
washout outlet pipe arrangement as necessary & C.I. Cover 0.60 x
weight not less then 35 kg with locking arrangement etc. complete as per
structural drawing Including Reinforcement TMT-FE500/500D as per
drawings and design supplied by architect (In This Overhead tank area
constructed above 1.0 mt from finish floor level, column for only height
purpose are paid saperately) and instruction given by authority and E.I.C.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
227 Supply, Installation, testing & commissioning of following size of flange 3.00 No 7963.65
type C.I. butterfly valve confirming to IS13095 / BS 5155 of following
pressure class with flanges, nut bolts, gaskets other spares ,necessary
pad locking arrangement complete & including indicator for open and
shut position as per fire practice etc. complete. Complete requirement as
per drawing, BOQ, Specification & as directed by EIC / ARCHITECT.
PRESSURE CLASS PN 16150mm dia.
228 Supply, Installation, testing & commissioning of following size of flange 4.00 No 5925.63
type C.I. butterfly valve confirming to IS13095 / BS 5155 of following
pressure class with flanges, nut bolts, gaskets other spares, necessary
pad locking arrangement complete & including indicator for open and
shut position as per fire practice etc. complete. Complete requirement as
per drawing, BOQ, Specification & as directed by EIC / ARCHITECT.
PRESSURE CLASS PN 16100mm dia.
229 Supply, Installation, Testing and Commissioning of swing type Cast iron 2.00 No 9821.24
Dual plate Non Return valve (IS:5312 ) with EPDM lining ductile iron disc
and stainless steel spring (PN 20). A) 100mm dia.
230 Supply, Installation, Testing and Commissioning of C.I. Y type Strainer 1.00 No 9904.79
(PN 16) with 30 mesh SS screen supported on 18 swg thick SS
perforated sheet with require flange & nut bolt to complete the job as
satisfactory level. (A) 150mm dia.
231 Providing & fixing SS 304 fire hydrant single landing valve with 80 mm 10.00 No 6795.76
N.B. flanged inlet, SS Spindle controlled 63 mm dia female
instantaneous outlet type SS coupling, blank cap, chain, twist release
type lug & all accessories conforming to IS:5290 including fixing with
anchor fastener and flanged tapping from wet riser and provision for
pressure gauge with gun metal ball valve complete as required.
232 Supply, Installation, Testing and Commissioning of lockable Fire Hose 10.00 No 10044.45
Cabinet (750 mm x 600 mm x 250 mm deep) made of 18 SWG M.S.
sheet having single or double opening glazed (4.0 mm thick glass)
shutter including necessary locking arrangement by allan key, shall be
painted with one coat of primer and two coats of synthetic enamel paint
of approved shade. stove enameled Fire red finish with "Fire Hose"
marked on front, suitable for housing 2 nos. hose pipe, 1 No. branch pipe
and nozzle spanner. (Cost shall be inclusive of providing break glass box
containing key for the cabinet along with hammer).
233 Providing & fixing swinging type First Aid hose reel in red colour drum 10.00 No 7710.34
with 36 mts long and 25 mm dia heavy duty rubber water hose, SS Jet
nozzle of dia. 8mm outlet x 20mm along with 20mm dia ball valve and
heavy duty SS wire clamp complete with MS socket for tap-off, drum and
brackets (including painting) for fixing on wall with anchor fastener, bolts
& nuts complete as required. All supporting arrangements / equipment's
as per standard / as approved by consultant / Local CFO requirements.
234 Supply & Installation of non-percolating rubber reinforced lined fire hose 20.00 No 4623.54
pipe (as per IS : 636) type-A of 63 mm dia, 1 x 15 m length. The hose
shall be rated for burst pressure of 38 Kg/sqcm. Hose shall be complete
with ISI marked SS male & female coupling (IS:903) with SS wire binding.
235 Supply & Installation of 63 mm dia instantaneous pattern Branch Short 10.00 No 2147.34
S.S. pipe, 16 mm dia. nozzle conforming to IS 903, suitable for inter
connection to hose pipe coupling complete as required.
236 Supply, Installation, Testing and Commissioning of Brass ball valves (PN 10.00 No 6969.00
16) with all fittings, accessories & tool tackle to compelete the job up to
satisfactory level as per Client's PM requirement. (A) 25mm dia.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
237 Supply, Installation, Testing and Commissioning of the above ground 12.00 No 3381.00
pipe following sizes of G.I. Pipes of Class C (Heavy class) ISI marked
including accessories such as G.I. tees / elbows / reducers / couplings /
unions / bends / flanges / Blank Flange / Blind flange / End cap /dummy
plate etc. with proper MS bracket, structure support with U clamps with
Anchor fasteners. Support need to approved by client and laying on the
surface including painting with two coats of anticorrosive primer and two
coats of approved red enamel paint after laying and testing after
Installation etc. as per specifications complete as required. The quoted
rate shall also include for chasing / chipping / anchoring on walls and
making them good with filler material and finished in cement mortar etc.
complete. The rate shall be inclusive of Pipe marking / tagging / arrow
marking / letter writing as per Fire local norms with approved paints as
per CFO requirement. The supply of Cement in contractor Scope .G.I
pipe sleeve of suitable higher size shall be provided wherever the pipes
are crossing the walls/floors and sealing the sleeves with glass wool in
between & fire sealant compound at either end. All as per requirements
including cutting holes and chases in brick, R.C.C work and making good
the same to original conditions complete in all respects. All hangers,
clamps, brackets etc. shall be of galvanized iron unless specified
otherwise and the supply of the same shall also be included in rates
under this head. Welding of any kind on the galvanized support / hanger
complete requirement as per drawing, BOQ, Specification & as directed
by EIC / ARCHITECT complete. Note : The piping installation has to be
put to hydraulic test to1.5 times the working pressure & as per latest
applicable code & standard before applying paint etc. complete. (A)
150mm dia.
238 Supply, Installation, Testing and Commissioning of the above ground 110.00 No 2651.25
pipe following sizes of G.I. Pipes of Class C (Heavy class) ISI marked
including accessories such as G.I. tees / elbows / reducers / couplings /
unions / bends / flanges / Blank Flange / Blind flange / End cap /dummy
plate etc with proper MS bracket, structure support with U clamps with
Anchor fasteners. Support need to approved by client and laying on the
surface including painting with two coats of anticorrosive primer and two
coats of approved red enamel paint after laying and testing after
Installation etc. as per specifications complete as required. The quoted
rate shall also include for chasing / chipping / anchoring on walls and
making them good with filler material and finished in cement morter etc.
complete. The rate shall be inclusive of Pipe marking / tagging / arrow
marking / letter writing as per Fire local norms with approved paints as
per CFO requirement.The supply of Cement in contractor scope. G.I pipe
sleeve of suitable higher size shall be provided wherever the pipes are
crossing the walls/floors and sealing the sleeves with glass wool in
between & fire sealent compound at either end. All as per requirements
including cutting holes and chases in brick, R.C.C work and making good
the same to original conditions complete in all respects. All hangers,
clamps, brackets etc.shall be of galvanized iron unless specified
otherwise and the supply of the same shall also be included in rates
under this head. Welding of any kind on the galvanized support / hanger
Complete requirement as per drawing, BOQ, specification & as directed
by EIC / ARCHITECT complete. Note : The piping installation has to be
put to hydraulic test to 1.5 times the working pressure & as per latest
applicable code & standard before applying paint etc. complete. (B)
100mm dia.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
239 Supplying, Installation, Testing and commissioning of Dry Chemical 10.00 Rmt 7676.00
Powder (DCP) 6 Kg Fire Extinguisher Mono Ammonium Phosphate
Powder 40, Stored Pressure Type, Pressure Gauge, Controllable
discharge mechanism Class A, Rating 3A & Class B rating 21B as per IS
15683 ISI MARK (ABC Dry Chemical Powder - MAP 40%) fitted with
required accessories including wall suspension brackets.
240 Supply, Installation, Testing and Commissioning of Carbon Dioxide (Co2) 10.00 Rmt 9595.00
type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked /
TAC approved fitted with required accessories including wall suspension
241 Supply & Installation AUTO GLOW Signage's in Block / Small Letters of 10.00 Rmt 454.50
require tool & tackles to complete the job in satisfactory level of Client
PM's. Fire Equipment : 4" x 12"
242 Arrow downward +running main+emergency Exit with symbol: 6" x 16" 10.00 Rmt 454.50
243 Co2 fire extinguishers with symbol (4" x 4") 10.00 Rmt 565.60
244 DCP fire extinguishers with symbol (4" x 4") 10.00 Rmt 565.60
245 Fire Hydrant & Hose reel with symbol. (6" x 8") 10.00 Each 565.60
246 Supply, Installation, Testing and Commissioning of Electric driven 1.00 Each 76617.23
Booster Pump on Terrace level suitable for automatic operation and
consisting of following: complete in all respect as required. a) Horizontal
Type, single stage, centrifugal pump of cast iron body and bronze
impeller with stainless steel shaft, mechanical seal and flow of 450 lpm at
35m.head conforming to IS standards. b) Squirrel cage induction motor
with suitable HP with synchronous speed 2800 RPM, Suitable for
operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for
enclosure, horizontal foot mounted type with Class-F insulation,
Conforming to IS standards. (c) Common Base plate for Pump and
motor and coupling, coupling guard, vibration pad, cables and other
accessories as required for complete installation of pump set.
247 Supplying, Installation, Testing and Commissioning of Control Panel 1.00 Each 218404.82
suitable for automatic operation of fire fighting pump consisting (450 lpm -
Terrace Booster pump) (a) Necessary Power & Control Cabling, cable
carrier system, termination of cable, earthing from panel to individual
equipment shall be included in the quoted price. (b) Facility for more
(d) interlocking of pressure switch with pumps (e) IBMS Compatible with
necessary Potential free contacts for monitoring on/off status & trip
status in BMS.
248 Providing, fixing and testing forged brass 25 mm dia. screwed inlet single 2.00 Each 1787.70
acting air release valve, PN 16 with ball valve arrangement to be
installed on top of riseres etc. complete. End connection should be BSP
249 APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY Getting of 1.00 Job 101000.00
Fire Fighting System Approval from local fire authority with all other
charges and documentations for getting No Objection Certificate.
Electrical Items
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
250 SECTION 1.00 POINT WIRING 820.00 Pt. 485.81
Point wiring in Copper (Modular)
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected
with 6A Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured / metallic / white front
plate modules erected on / in wall / ceiling as per pipe erected, with
necessary Lamp holder / ceiling rose / H.D. Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall / ceiling complete Cat. III
251 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm 463.00 Pt. 167.66
& earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires, in below type of pipe to
be erected complete with earth continuity and necessary connection with
primary light with accessories erected on Metal / PVC / wooden box
covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet for open /
concealed wiring. with necessary lamp holder / ceiling rose /
H.D.Connector as directed. Note :- Maximum up to 6 mtrs length, excess
will be considered as mains for Secondary Point. (f) with medium class
Rigid PVC pipe and accessories erected concealed in wall / ceiling
252 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 248.00 Pt. 674.68
both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type electronic fan
regulator mounted and accessories with earth continuity of following
type erected on PVC / Metallic / Wooden box, single mounting base
frame covered with textured / metallic / white front plate modules erected
on / in wall / ceiling as per pipe erected with necessary ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall / ceiling complete. Cat-III
253 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 260.00 Pt. 510.05
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic /
Wooden box covered with appropriate front plate modules erected on / in
wall / ceiling as per pipe erected with following type of accessories.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby
switch board/mcb db board
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall / ceiling complete Cat-III
254 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 78.00 Pt. 745.38
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic /
Wooden box covered with appropriate front plate modules erected on / in
wall / ceiling as per pipe erected with following type of accessories.
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from
mcb db board.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall / ceiling complete. (FRLS) Cat. III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
255 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 146.00 Pt. 871.63
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin plug erected on PVC / Metallic /
Wooden box covered with appropriate front plate modules erected on / in
wall / ceiling as per pipe erected with following type of accessories.
[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with
sq.mm (green) earthing wire from mcb d b board.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall / ceiling complete. (FRLS) CAT III
256 Point wiring for on board Looped Plug with 6A Modular type switch & 5 602.00 Pt. 257.55
pin socket erected on PVC / Metallic / Wooden box, single mounting
base frame covered with textured / metallic / white front plate modules
erected on / in wall / ceiling with following type accessories. Cat-III
257 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth 14.00 Pt. 603.98
wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multi strand copper wires erected in below type of pipe
with 6A Modular type switches and following type of accessories erected
on PVC / Metallic / Wooden box, single mounting base frame covered
with textured / metallic / white front plate modules erected on / in wall /
ceiling as per pipe erected with necessary batten/angle holder or ceiling
rose or H.D. Connector as directed. (f) with medium class Rigid PVC
pipe and accessories erected concealed in wall / ceiling complete. Cat-III
258 Providing following type of Modular Type Accessories mounted with PVC 5.00 Ea. 160.59
/ metallic / Wooden box, single mounting base frame covered with
textured / metallic / white front plate, modules erected with necessary
connections as per site situation directed by Engineer In charge. (4) TV
Co-axial Socket outlet Cat-III
259 Providing following type of Modular Type Accessories mounted with PVC 80.00 Ea. 25.25
/ metallic / Wooden box, single mounting base frame covered with
textured / metallic/white front plate, modules erected with necessary
connections as per site situation directed by Engineer In charge. (7)
Blank Plate Single Cat-III
260 Call bell gong type suitable for 230 volts, 50 c/s. AC supply complete 3.00 Ea. 42.42
261 Decorative call bell Ting-tong box type 250 volts complete erected 3.00 Ea. 71.71
262 Conduits & Pipes 200.00 Mtr. 24.24
Providing and erecting ISI mark Medium class RIGID PVC PIPES of
following size complete to be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with adhesive solution &
Clamps with following dia of pipes, in approved manner as directed. (a)
263 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 1975.00 Mtr. 33.33
following size complete to be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with adhesive solution &
Clamps with following dia of pipes, in approved manner as directed. (b)
264 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 250.00 Mtr. 54.54
following size complete to be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with adhesive solution &
clamps with following dia of pipes, in approved manner as directed. (c)
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
265 Mains & Wires 1800.00 Mtr. 62.62
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following type of pipe to be
erected concealed in / flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size.
(A) With medium class Rigid PVC pipe and accessories
(a) 2 wire 1.5 sq. mm (FRLS)
266 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 5350.00 Mtr. 82.82
marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size
(A) with medium class Rigid PVC pipe and accessories
(b) 2 wire 2.5 sq.mm (FRLS)
267 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 5400.00 Mtr. 112.11
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS
PVC insulated stranded wire of green colour for earth continuity of
following size.
(A) with medium class Rigid PVC pipe and accessories
(a) 2 wire 4 sq.mm
268 Providing & erecting approved make following size of TV Co-axial flexible 550.00 Mtr. 39.39
cable comprising inner conductor of solid bare copper insulated with
Foam PE & Secondary conductor made of poly - Aluminium film bonded
Al. Braids @ suitable coverage overall sheathed with black PVC
insulation. (B) RG -6
269 SECTION 2.00 CABLES & ACCESSORIES 80.00 Mtr. 284.82
ARMOURED ALLUMINIUM CABLES.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables.
(C) 3 1/2 core 50 Sq. mm (25 Sq.1/2 mm core)
270 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 6280.00 Mtr. 140.39
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
(c) 4 Core 10 Sq.mm.
271 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 80.00 Mtr. 271.69
multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe at road crossing or floor of
following size of cables. (A) 4 core 2.5 Sq. mm
272 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 70.00 Mtr. 364.61
multistrand Copper conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe at road crossing or floor of
following size of cables. (B) 4 core 4 Sq. mm
273 CABLE GLANDS. 8.00 Ea. 33.33
Providing and fixing heavy duty flange type brass cable gland with rubber
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables. (a) 2 to 4 Core 2.5 /
274 Providing and fixing heavy duty flange type brass cable gland with rubber 740.00 Ea. 38.38
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc. for following size of cables. (c) 2 to 4 Core 10 Sq.mm
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
275 Providing and fixing heavy duty flange type brass cable gland with rubber 2.00 Ea. 75.75
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50
276 CABLE LUGS. 2960.00 Ea. 13.13
Solder less crimping type Aluminium lugs conforming to IS suitable for
cable of following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/cadmium plated nut bolts in
an approved manner. (B) 10 Sq.mm (ISI MARKED)
277 Solderless crimping type Aluminium lugs conforming to IS suitable for 8.00 Ea. 20.20
cable of following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/cadmium plated nut bolts in
an approved manner. (D) 35/50 Sq.mm.
278 Solderless crimping type Copper lugs conforming to IS suitable for cable 18.00 Ea. 8.08
of following size evenly crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated nut bolts in an approved
manner. (A) 1.5/2.5 to 6 Sq.mm (ISI MARKED)
279 Providing and fixing approved make Perforated C type cable tray. Made 70.00 Rmt. 322.19
from pre- galvanized CR sheet steel. The cable tray should be bended
as per IS 2062/1079 with coupler plate / Fish plate and GI hardware like
nut - bolt and washers etc. erected on existing support as per
specification and as per instruction of engineer in charge. (3) 150 x 50 x
1.5 mm thick
280 Providing and fixing approved make 'T' Junction for Perforated C type 3.00 Ea. 167.66
cable tray. Made from pre galvanized sheet steel. The Junction should
be bended as per IS 2062/1079. with max 17.5% perforation with
coupler plate / Fish plate and GI hardware like nut - bolt and washers
etc. erected on existing support as per specification and as per
instruction of engineer in charge. (3) 150 x 50 x 1.6 mm thick 'T' Junction
281 Providing and fixing approved make '90° Elbow' for Perforated C type 5.00 Ea. 146.45
cable tray. Made from pre galvanized CR sheet steel. The Junction
should be bended as per IS 2062/1079 with coupler plate / Fish plate
and GI hardware like nut - bolt and washers etc. erected on existing
support as per Specification and as per instruction of engineer in
charge. (3) 150 x 50 x 1.5 mm thick 90° Elbow
282 FABRICATION 65.00 KG 77.77
Providing, erecting, fabricating the M.S. structure as per requirement on
site incorporating proper size of M.S. angles,square,round, flats, bars,
channels, sections complete with cutting, welding, grinding & finishing
duly painted with one coat of red oxide with erection on site as per
direction of engineer in charge with necessary grouting, cementing,
plastering & finishing complete. (for Cable Tray support & PANEL)
283 SECTION 3.00 SWITCHGEARS & DISTRIBUTION BOARDS 50.00 Ea. 112.11
MINIATURE CIRCUIT BREAKERS.
Providing and erecting Miniature circuit breaker single pole 6A to 25A
suitable to operate on 240 V A.C. system and having breaking capacity
10 KA to be erected in existing box confirming to IS 8828/1996 with ISI
Mark. Cat-III
284 Providing & erecting 240 V MCB double pole switch for lighting Load (B 106.00 Ea. 278.76
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in
existing box having following capacity (QTY FOR MCB OF DB AND MCB
OF PANEL) Cat-III. (A) 6 to 32 Amp. Cat-III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
285 Providing & erecting 240 V MCB double pole switch for lighting Load (B 4.00 Ea. 295.93
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in
existing box having following capacity (QTY FOR MCB OF DB AND MCB
OF PANEL) Cat-III (B) 40 Amp. Cat-III
286 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 19.00 Ea. 737.30
Curve) having 10KA breaking capacity & confirms to IS :8828 in existing
box having following capacity (QTY FOR MCB OF DB AND MCB OF
PANEL) Also consider in general) Cat-III (c) 63 Amp. Cat.III
287 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 13.00 Ea. 668.62
Curve) having 10KA breaking capacity & confirms to IS :8828 in existing
box having following capacity (QTY FOR MCB OF DB AND MCB OF
PANEL) Also consider in general) Cat-III (B) 40 Amp Cat.III
288 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B 9.00 Ea. 638.32
curve) having 10KA breaking capacity & confirms to IS :8828 in existing
box having following capacity (QTY FOR MCB OF DB AND MCB OF
PANEL) Cat-III (b) 40 Amp. Cat.III
289 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 43.00 Ea. 595.90
Curve) having 10KA breaking capacity & confirms to IS :8828 in existing
box having following capacity (QTY FOR MCB OF DB AND MCB OF
PANEL) Also consider in general) Cat-III (a) 6 to 32 Amp. Cat.III
290 Providing and erecting Sheet Steel powder coated MCB distribution 12.00 Ea. 885.77
board - flush / surface mounted fitted with busbar, neutral link, earth bar
and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB
to house appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase outgoing
(b) sheet steel double door (IP-43) (ii) 6 way Cat-III
291 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 Ea. 1152.41
board - flush / surface mounted fitted with busbar, neutral link, earth bar
and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB
to house appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase outgoing
(b) sheet steel double door (IP-43) (iii) 8 way Cat-III
292 EARTH LEAKAGE CIRCUIT BREAKERS. 32.00 Ea. 2235.13
Providing and erecting Approved make RCCBs conforming to IS:
and having sensitivity of 30 mA and Short Circuit withstand capacity of
10 KA and suitable for operation on single phase 240 V,50Hz. having
characteristic of quick action & tripping with all advance feature & do not
incorporate any electronic component. for following Max. rating erected
as directed (ii) 40 Amps. DP Cat-III
293 Providing and erecting Approved make RCCBs conforming to IS: 12640 100.00 Ea. 1969.50
and having sensitivity of 30 mA and Short Circuit withstand capacity of
10 KA and suitable for operation on single phase 240 V, 50Hz. having
characteristic of quick action & tripping with all advance feature & do not
incorporate any electronic component. for following Max. rating erected
as directed (i) 25 Amps. DP Cat-III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
294 Providing and erecting Approved make Four pole moulded case circuit 9.00 Ea. 6173.12
breaker having breaking capacity ICU of 25 KA. at 415 V,having normal
current rating up to 25 A to 100A. with Fixed thermal & magnetic release
suitable to work on A.C. supply 50 c/s. with all internal connections,
spreader tinned copper & complete erected in existing 16 G.M.S.
housing. Operational Handle Assembly Complete with spreader links and
rotary handle. The cost inclusive of spreader links and rotary handle. No
extra price will be provided for the same. ICS=100% of ICU only. Cat III
295 Providing and erecting Approved make Earth fault Relay suitable to 8.00 Ea. 4687.41
mount with inter connection suitable to following size of moulded case
circuit breaker having CT ratio & MCCB rating as following along with
shunt trip 220V AC. with all internal connections & complete erected in
existing M.S. housing. (1) 15 A -100 A, CT Ratio 1/100
296 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting 18.00 Rn.Mtr 660.54
Aluminium Busbars with four equal Nos. of bus having current density
not more than 0.8 Amp. / sq.mm (Rated current / cross section area)
duly wrapped with colour insulating tape for phase sequence of following
current carrying capacity, erected with necessary bus bar supports /
insulators, main cable socket to each busbar,erected in existing cubical
panel with necessary connections. (A) Suitable for 100 Amp. Capacity
297 CUPBOARDS. 2.00 Sq. 14902.55
Providing & erecting weather proof, dust & vermin proof, floor mounted Mtr
front operated indoor type cubical panel board necessary IP-42 and
above protection as per approval from engineer incharge made from
SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories, supporting
angles / flats channel including cutting, bending, drilling, welding, riveting
with internal partitions & cable alley as per requirements & instruction of
engineer-in-charge with erection of supplied switch gears, BUSBARS,
suitable size of inter connecting PVC copper wire / copper-aluminium
strips, rubber grommets, rib, bakelite control fuses / MCB for measuring
instruments, earth bus & earth bolts, foundation flange - bolts-base
Plates, sufficient nos. of hinged doors, handles with locking arrangement
and rubber gasket, heavy duty end terminal connection, danger notice
board, necessary ventilation, earthing strip complete.
The Panel shall be painted with epoxy powder coating. (The rates
excludes the cost of switchgears, bus bars, inter connecting mains &
Copper Aluminium strips, meters, Fuses etc. The dimension shall be
measured excluding base beams) The panel shall be supplied with
following approved manufacturers with following size. (B) The standard
companies switch gear shall be used and only manufacturers at CPRI
approved factory (i) with 350mm depth
298 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 350.00 Mtr. 91.91
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required. (f) One wire 10.00 sq. mm
299 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 375.00 Mtr. 17.17
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required. (b) One wire 1.50 sq. Mm
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
300 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 205.00 Mtr. 142.41
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required. (g) One wire 16.00 sq.mm
301 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 325.00 Mtr. 27.27
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required. (c) One wire 2.50 sq. mm
302 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 650.00 Mtr. 37.37
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required. (d) One wire 4.00 sq. mm
303 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte 150.00 Mtr. 56.56
multi stranded, annealed copper conductor with heat resistant PVC
insulated conforms to IS 694, IEC - 227 erected in existing pipe of
following size (Specifically for control panel, relays, power switchgears,
motor starters & control wiring) with required size of copper lugs, nuts
and bolts if required. (e) One wire 6.00 sq.mm
304 Fabricating the box type items made from M.S. Sheet with A.I. supports, 150.00 Kg. 180.79
wings, doors, handles other hardware materials as per requirement
design with finishing by three tank powder coating processed inside and
outside painted, erected as directed including minor civil work.
305 Painting by cleaning, the surface and applying one coat of primer and 7.00 Sq.Mtr 146.45
two coats of enamel paint for meter cup-board or base plate suitable to
match the wall finish
306 Painting the number and words for inventory Identification on erected 10.00 Ea. 22.22
fittings / equipment’s or Such accessories as may required with good
quality of enamelled paint as directed by engineer in charge. (i) up to
characters, up to 50 mm height.
307 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 27.00 Ea. 274.72
1000/5 ratio 15 VA burden erected in existing CRCA box duly secured
with insulating materials connected to the meter.
308 Supplying and erecting approved make set of indicator lamps of LED 47.00 Ea. 43.43
type lamp, lens cover, Bakelite holder complete erected with necessary
connections WITH SWITCH FOR BMS INTEGRATION FOR ALL
FEEDERS OF PANELS. (For R-Y-B & on-off-trip indication)
309 Providng and erecting Approved make single phase electronic energy 10.00 Ea. 1738.21
meter rating 5A/20A/40A based on ASIC (Application Specific integral
circuit) digital technology with accuracy Class-I, temper proof, free from
effect of external magnetic field with phase, earth, reverse and impulse
indications, 6 digit electro-mechanical counter suitable to work on 120 V
to 300V, 45 - 55 Hz, housed in robust enclosure complete to be erected
as directed with 3 year replacement guarantee.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
310 Providing and erecting multifunctional meter suitable for application of 7.00 No. 14123.84
Power monitoring and showing measurement of following Voltage,
Frequency, Apparent energy, Apparent power, Active and reactive
energy, Active and reactive power, Average voltage Vavg, Peak demand
power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2,
S3, Unbalance current, Power factor and displacement PF (signed, four
quadrant), Calculated neutral current, Active, reactive, apparent energy
(signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32,
U13, V1, V2, V3, Phase currents, Average current Iag, Peak demand
currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us]
rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network
frequency 50 Hz, Type of network 3P, Display type 7 segments LED,
Display colour Red, Messages display capacity 3 fields of 4 characters,
Display digits 12 digit(s) - 14.2 mm in height
311 SECTION 4.00 LIGHT FIXTURE AND FAN 315.00 No. 589.84
ALL LIGHT FIXTURES SHALL COMPLY TECHNICAL PARAMETERS
AS MENTIONED BELOW:
1.The Fixture and driver should be of same make only.
2.The manufacture should provided Complete TTC and quality
assurance Plan for Fixtures during supply.
3.The Warranty letter for 5years should be provided by the Manufacturer.
4. Fixture should be warrantied for 5yrs for 50,000 hrs @ L70 (LM79
from NABL accredited Lab to be submitted along with Letter from
Manufacturer for the Life class claim of L70 @ 50,000 hrs.)
5. The product should be Manufactured in India (all the Components
should be manufactured in India except the Led source which can be
imported. (Approved Led source Nichia, Cree, Lumileds, Osram Only the
Invoice copy of the Purchase of Led modules from these manufacturer's
need to be submitted)
6. PF >=0.9 and THD <=15% (Certificate need to be submitted from
NABL Accredited lab)
7. The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004
8. The manufacturer should have its own NABL accredited Laboratory.
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet steel conforming to IS:
513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with
company mark/name 160V to 270V,Power Factor more than 0.9, THD <
CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver
efficiency > 85% (fitting required LM-79 & LM-80 Certificates) (NOTE:
Below description have shown ranges of Wattage capacity of LED
the ranges shown) (A) Square/ Circular shaped surface / Recessed
Mount Downlight with provision for spring loaded mounting clips
complete. IP20 (iii) 16-20 watts, Surge-2 KV CAT-III
312 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 129.00 Nos. 165.64
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. & corrosion resistance
with diffuser with company mark/name 160V to 270V, Power Factor more
than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt, LED
LED driver efficiency > 85%
(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description
have shown ranges of Wattage capacity of LED fittings. The Engineer
(A) Tube Light with integral/ non-integral driver
(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet CAT-III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
313 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 579.00 Nos. 373.70
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. & corrosion resistance
with diffuser with company mark/name 160V to 270V, Power Factor
more than 0.9, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt, LED
LED driver efficiency > 85%
(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description
have shown ranges of Wattage capacity of LED fittings. The Engineer
(A) Tube Light with integral/ non-integral driver
(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet CAT-III
314 FANS & ACCESSORIS. 248.00 Ea. 2629.03
Supply, Installation, Testing and Commissioning of suitable sweep, BEE
5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC)
permanent ferrite magnet Motor, class of insulation: B, Rust free
nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing
provision, copper winding, Power factor not < 0.9, Service Value
(CMM/W) minimum 6.85, Air delivery minimum 215 CMM,
RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible with
electronic regulator unit for Speed Control and all remaining accessories
including safety pin, nut bolts, washers, temperature rise = 75 degree C
(Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge,
over current and overload protection, 50 Hz, Single phase AC Supply,
earthing etc. complete as required.[ Make shall be approved by Engineer
in charge] (A) 1200 mm Sweep (48")
315 FAN ACCESSORIES. 248.00 Mtr. 108.07
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.
Pipe down rod erected duly painted for fan complete with proper
insulation without leakage and earthing.
316 Supplying & erecting S type Fan Hook of 10 mm M.S. Roundbar grouted 248.00 Ea. 43.43
in RCC slab with Making the site as original.
317 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 248.00 Ea. 108.07
the RCC bars up to 50mm length each side and pierced through a
Gauge M.S. box / Heavy Duty PVC box complete erected concealed in
Ceiling with necessary finishing..
318 Providing Fan clamp of 30 x 5 mm flat/Stype hook of required length & 248.00 Ea. 98.98
10 mm M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S.
Round Bar.
319 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or 12.00 Ea. 18.18
320 TABLE FANS, EXHAUST FANS & ACCESSORIES. 92.00 Ea. 1703.87
Supplying & erecting approved make low noise decorative exhaust fan
having size 200mm with 1350 RPM with square frame ABS body with
inbuilt lowers & square frame. (Make shall be approved by Engineer in
charge). Cat-II
321 BRACKET FANS. 3.00 Nos 2534.09
Supplying and erecting approved make Cabin fan of 230V. A.C. 50 Cy/s.
400 mm. sweep oscillating type complete erected with lead wires as
directed.frame ms body & round and fan wing also ms body. Cat-II
322 SECTION 5.00 EARTHING AND LIGHTINING PROTECTION 550.00 Kg. 77.77
Providing and erecting required size HOT deep Galvanised iron strip for
earthing of H.T., OCB/ ACB/ Transformer LT panel board, Motors etc.
using proper clamp.
323 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 180.00 Kg. 77.77
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
324 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel 28.00 Ea. 5992.33
electrode with 250 micron copper bonding & 1 bag of Carbon fill Based
environment friendly backfill tested as per IEC 62561-7 in NABL
accredited Laboratory and suitable stainless Steel double sided clamp.
Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit
Chamber with following dimensions : 254 mm dia (top), 330 mm dia
(bottom) & 260 mm (height).
325 SECTION 6.00 UPS SYSTEM 1.00 Nos 29616.23
Supplying and erecting approved make online Un-interruptible Power
Supply system comprising flat cum-boost charger with IGBT base
rectifier & Inverter & sealed maintenance free SMF batteries. The
charger having operating capacity for input 160-270V AC & inverter
having output 230V,50 Hz Ac with 0.8 load power factor with battery,
over/under voltage output with over load & short circuit protection
equipment. The system housed in CRC sheet duly powder coated paint
with following power backup.with MS painted batteries stand, 10%
Overload capacity for momentary load.
(A) 1 KVA with 1Hr Backup
326 SECTION 07.00 WATER COOLER & AC-GEYSER 2.00 Ea. 49559.69
Providing and erecting water cooler having storage capacity 80Ltr. &
cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet
temp. of the water should drop by 15˚ C within a hour, The water cooler
should be comprising of hermetically sealed compressor, fan motor,
condensing unit, water tank surrounded by evaporating coil, thermostats,
relay etc. complete with necessary inlet & outlet connection. The body of
water cooler will be made from Stainless Steel. ◦
327 Supplying and erecting water filter cum purifier with ultra violate 1.00 Ea. 5424.71
technology. (Aquaguard / waterdoc model or equivalent symphony/
crystal/videocon model)
328 Supplying and laying UPVC cable trunking system comprising 150.00 Mtr. 277.75
unplasticised polyvinyl, chloride rigid material with ignition free and flame
proof confirming BS with necessary end caps Internal and external bend,
flat bends, coupler, tee etc. all necessary accessories and measuring of
following sizes (1) 75 mm x 50 mm trunking
329 SECTION 2.00 CABLES & ACCESSORIES 100.00 Mtr. 731.24
ARMOURED ALLUMINIUM CABLES.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
(G) 3 1/2 core 150 Sq.mm (70 Sq.mm 1/2 core)
330 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 300.00 Mtr. 378.75
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
(D) 3 1/2 core 70 Sq.mm (35 Sq.mm 1/2 core)
331 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 400.00 Mtr. 153.52
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
(a) 4 Core 16 Sq.mm.
332 Providing and fixing heavy duty flange type brass cable gland with rubber 14.00 Ea. 47.47
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc. for following size of cables. (D) 2 to 4 core 16 Sq.mm
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
333 Providing and fixing heavy duty flange type brass double compression 10.00 Ea. 103.02
type cable gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc. for following size of
cables. (C) 3 & 1/2 core 70 Sq.mm
334 Providing and fixing heavy duty flange type brass double compression 4.00 Ea. 190.89
type cable gland with rubber ring for PVC insulated armoured cable
complete with out going tails, insulating tape etc. for following size of
cables. (F) 3 & 1/2 core 150 Sq. mm
335 Solder less crimping type Aluminium lugs conforming to IS suitable for 80.00 Ea. 15.15
cable of following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass/cadmium plated nut bolts in
an approved manner. (C) 16/25 Sq.mm. (ISI MARKED)
336 Solder less crimping type Aluminium lugs conforming to IS suitable for 40.00 Ea. 25.25
cable of following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass / cadmium plated nut bolts
in an approved manner. (E) 70 Sq.mm.
337 Solder less crimping type Aluminium lugs conforming to IS suitable for 16.00 Ea. 61.61
cable of following size evenly crimped with high pressure tool &
connected to switchgear terminals with brass / cadmium plated nut bolts
in an approved manner. (H) 150 Sq.mm.
338 Providing and erecting Epoxy Outdoor / Indoor end termination Kit 2.00 Ea. 775.68
suitable for LT PVC insulated armoured cable1.1 KV grade complete
with ferrule bushing and accessories and suitable clamps duly erected
and connected to the supply for all cores cables of following size. (D)
339 Providing and fixing approved make Perforated C type cable tray. Made 50.00 Rmt. 471.67
from pre- galvanized sheet steel. The cable tray should be bended as
per IS 2062/1079 with max 17.5% perforation with coupler plate / Fish
plate and GI hardware like nut - bolt and washers etc. erected on existing
support as per specification and as per instruction of engineer in charge.
(5) 300 x 50 x 1.5 mm thick
340 Providing and fixing approved make 'T' Junction for Perforated C type 2.00 Ea. 249.47
cable tray. Made from pre galvanized sheet steel. The Junction should
be bended as per IS 2062/1079 with max 17.5% perforation with coupler
plate / Fish plate and GI hardware like nut - bolt and washers etc.
erected on existing support as per specification and as per instruction of
engineer in charge. (5) 300 x 50 x 2.0 mm thick 'T' Junction
341 Providing and fixing approved make '90° Elbow' for Perforated C type 3.00 Ea. 219.17
cable tray. Made from pre galvanized sheet steel. The Junction should
be bended as per IS 2062/1079 with coupler plate / Fish plate and GI
hardware like nut - bolt and washers etc. erected on existing support as
per Specification and as per instruction of engineer in charge. (5) 300 x
50 x 2.0 mm thick 90° Elbow
342 SECTION 3.00 FLOOR METAL TRUNKING 100.00 Mtr. 377.74
Supplying under floor pregalvanised corrosion proof rectangular sheet
steel cable trunking of 1.6 mm thick having with stand point load up to
1.33 Ton & free from seepage of concrete of screed water with all
accessories, Junction Box, Joints as required and demanded by
engineer-incharge and laying/erecting as per OEM guidelines and as
per instruction of engineer incharge having following size of dimensions
and No of compartments (W x D x T) Cat-III [7] 50mm x 38mm x 1.6 mm
with One Compartments
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
343 Supplying under floor pregalvanised corrosion proof rectangular sheet 100.00 Mtr. 548.43
steel cable trunking of 1.6 mm thick having with stand point load up to
1.33 Ton & free from seepage of concrete of screed water with all
accessories, Junction Box, Joints as required and demanded by
engineer-incharge and laying / erecting as per OEM guidelines and as
per instruction of engineer incharge having following size of dimensions
and No of compartments (W x D x T) Cat-III [9] 100mm x 38mm x
mm with One Compartments
344 Supplying under floor pregalvanised corrosion proof rectangular sheet 30.00 Mtr. 1342.29
steel cable trunking of 1.6 mm thick having with stand point load up to
1.33 Ton & free from seepage of concrete of screed water with all
accessories, Junction Box, Joints as required and demanded by
engineer-incharge and laying/erecting as per OEM guidelines and as
per instruction of engineer incharge having following size of dimensions
and No of compartments (W x D x T) Cat-III [13] 300mm x 38mm x
mm with Three Compartments
345 SENSOR FOR TOILETS 10.00 Ea. 4366.23
Providing & erecting stand alone ceiling mount PIR motion Sensor with
ABS Housing single phase AC operation. Complete with Dual element
pyroelectric sensor, Digital Signal Processing Detection Range 14 feet at
10 feet height, angle 360 degree, RFI and EMI immunity, Detects motion
in it's coverage area. Multipurpose device can be used as security
device, an energy saving device, an automatic switch. Complete with
infra red sensor, Light & sensitivity Sensor, Timer with Bye pass facility.
Suitable for 400 watts electrical load
346 SECTION 4.00 SWITCHGEARS & DISTRIBUTION BOARDS 410.00 Ea. 112.11
MINIATURE CIRCUIT BREAKERS.
Providing and erecting Miniature circuit breaker single pole 6A to 25A
suitable to operate on 240 V A.C. system and having breaking capacity
10 KA to be erected in existing box confirming to IS 8828/1996 with ISI
Mark Cat-III
347 Providing and erecting Sheet Steel powder coated MCB distribution 2.00 Ea. 3874.36
board - flush / surface mounted fitted with busbar, neutral link, earth bar
and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB
to house appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for
(B) three phase incoming and single phase horizontal type outgoing Per
phase isolation type (PPI) (b) sheet steel double door (IP-43)
(iv) 12 way CAT-III
348 Providing and erecting Sheet Steel powder coated MCB distribution 8.00 Ea. 2913.85
board - flush / surface mounted fitted with busbar, neutral link, earth bar
and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB
to house appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for
(B) three phase incoming and single phase horizontal type outgoing Per
phase isolation type (PPI) (b) sheet steel double door (IP-43)
(ii) 6 way Cat-III
349 Providing and erecting Sheet Steel powder coated MCB distribution 82.00 Ea. 629.23
board - flush / surface mounted fitted with busbar, neutral link, earth bar
and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB
to house appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase outgoing
(b) sheet steel double door (IP-43) (i) 4 way Cat-III
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
350 Providing and erecting Approved make Four pole moulded case circuit 1.00 Ea. 16221.61
breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal
current rating 200A.with variable Thermal & magnetic release suitable to
work on A.C.supply 50 c/s. with all internal connections, spreader tinned
copper & complete erected in existing 16 G.M.S. housing. Operational
Handle Assembly Complete with spreader links and rotary handle.
The cost inclusive of spreader links and rotary handle. No extra price will
be provided for the same. ICS=100% of ICU only. Cat III
351 Providing and erecting Approved make Four pole moulded case circuit 1.00 Ea. 25228.79
breaker having breaking capacity ICU of 50 KA and above at 415 V
having Normal current rating 400A. with variable Thermal & magnetic
release suitable to work on A.C.supply 50 c/s. With all internal
connections, spreader tinned copper & complete erected in existing
G.M.S. housing. Operational Handle Assembly Complete with spreader
links and rotary handle. The cost inclusive of spreader links and rotary
handle. No extra price will be provided for the same. ICS=100% of ICU
only. Cat III
352 Providing and erecting Approved make Earth fault Relay suitable to 1.00 Ea. 5415.62
mount with inter connection suitable to following size of moulded case
circuit breaker having CT ratio & MCCB rating as following along with
shunt trip 220V AC. with all internal connections & complete erected in
existing M.S.housing. (3) 250 A -400 A, CT Ratio 1/400
353 Supplying and erecting triple pole & neutral 440V/ 500V panel mounting 4.00 Rn.Mtr 2204.83
Aluminium Busbars with four equal Nos. of bus having current density
not more than 0.8 Amp. / sq.mm (Rated current / cross section area)
duly wrapped with colour insulating tape for phase sequence of following
current carrying capacity, erected with necessary bus bar supports
/insulators, main cable socket to each busbar,erected in existing cubical
panel with necessary connections. (D) Suitable for 400 Amp. Capacity
354 CUPBOARDS. 5.00 Sq. 19387.96
Providing & erecting weather proof, dust & vermin proof, floor mounted Mtr
front operated indoor type cubical panel board necessary IP-42 and
above protection as per approval from engineer incharge made from
SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories , supporting
angles/ flats channel including cutting, bending, drilling, welding, riveting
with internal partitions & cable alley as per requirements & instruction of
engineer-in-charge with erection of supplied switch gears, BUSBARS,
suitable size of inter connecting PVC copper wire / copper-aluminium
strips, rubber grommets, rib, bakelite control fuses / MCB for measuring
instruments, earth bus & earth bolts, foundation flange - bolts-base
Plates, sufficient nos. of hinged doors, handles with locking arrangement
and rubber gasket, heavy duty end terminal connection, danger notice
board, necessary ventilation, earthing strip complete. The Panel shall be
painted with epoxy powder coating. (The rates excludes the cost of
switchgears, bus bars, inter connecting mains & Copper Aluminium
strips, meters, Fuses etc. The dimension shall be measured excluding
base beams) The panel shall be supplied with following approved
manufacturers with following size. (B) The standard companies switch
gear shall be used and only manufacturers at CPRI approved factory (ii)
with 550 mm. depth
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
355 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 80.00 Nos. 427.23
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with
company mark/name 160V to 270V,Power Factor more than 0.95, THD
< 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED
driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates)
(NOTE: Below description have shown ranges of Wattage capacity of
between the ranges shown) (A) Square/ Circular shaped surface /
Recessed Mount Downlight with provision for spring loaded mounting
clips complete. IP20 (ii) 11-15 watts, Surge-2 KV CAT-III
356 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 32.00 Nos. 758.51
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with
company mark/name 160V to 270V, Power Factor more than 0.95, THD
< 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED
driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates)
(NOTE: Below description have shown ranges of Wattage capacity of
between the ranges shown) (A) Square/ Circular shaped Surface /
Recessed Mount Downlight with provision for spring loaded mounting
clips complete. IP20 (iv) 22-24 watts, Surge-2 KV CAT-III
357 Supplying and erecting led lamps with following wattage capacity of 220 80.00 Nos. 69.69
to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22
lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder (i) 2 to 3 watts Cat-III
358 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and 250.00 Mtr. 299.97
tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party
laboratory to meet the requirement of IS/IEC 62305 with Required
Accessories - Aluminium Holding clamp at every 1 mtr distance,
Aluminium/SS cross splicer at every crossing of Alu. conductor,
Expansion piece with connectors at every 20 mtr distance, Aluminium
straight Splicer to connect conductors. All Accessories should be tested
as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for
Lightning impulse current withstand test: 100 kA of 10/350µs waveform
(Ageing & Electrical test) conducted in a sequence manner & tested in
the Govt. accredited Third party laboratory to meet the requirements of
IS/IEC
359 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia 3.00 Nos. 9416.23
and 1000 mm long. Air Termination Base tested for conditioning, Ageing
Test & Lightning impulse current withstand test: 100 kA of 10/350µs
waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC
62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold
Galvanized
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
360 SITC of 10 mm MS Round Solid Conductor having smooth surface 120.00 Mtr. 728.21
Should be tested and use exclusively for lightning protection (Vertical
Riser/Down Conductor which shall be concealed in Column OR Flushed
on) to meet the requirement of IS IEC 62305 With Accessories - Earthing
stud of dimension SS-75mm OD plate with 10mm dia tail connector used
in structural steel ring earthing system to meet the requirements of
IS/IEC 62305. (For Interconnecting the Column and the Terrace AL
Conductor / Strip / Flat), SS Cross Connector to connect Earth fixing
point to vertical raiser / Down conductor, SS Straight Splicer at every
Mtr to connect MS conductor in column, Bonding / Rebar Clamp at every
3 mtr suitable for interconnecting round conductor with reinforcement
inside the concrete for structural earthing system, SS connector -To
connect external conductor 8- 10 mm with earth fixing point. All
accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for
conditioning & Ageing Test & 6.4 for Lightning impulse current with stand
test: 100 kA of 10/350µs wave form (Ageing & Electrical test)
361 SITC of Galvanized Steel Flat 25 x 6 mm thickness from earth electrode 80.00 Mtr. 154.53
directly in ground as required. Zinc coating: 500 g/m square (Approx:70
micron coating) tested and used exclusively for lightning protection
earthing system and ring equipotential bonding.
362 SECTION 7.00 UPS SYSTEM 1.00 Nos 130103.15
Supplying and erecting approved make online Un-interruptible Power
Supply system comprising flat cum-boost charger with IGBT base
rectifier & Inverter & sealed maintenance free SMF batteries. The
charger having operating capacity for input 160-270V AC & inverter
having output 230V, 50 Hz Ac with 0.8 load power factor with battery,
over/under voltage output with over load & short circuit protection
equipment. The system housed in CRC sheet duly powder coated paint
with following power backup with MS painted batteries stand, 10%
Overload capacity for momentary load. (D) 5 KVA with 1Hr Backup
363 Providing & erecting water cooler having storage capacity 150 Ltr. & 4.00 Ea. 55893.40
cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The
outlet temp. of the water should drop by 15˚C within a hour, The water
cooler should be comprising of hermetically sealed compressor, fan
motor, condensing unit, water tank surrounded by evaporating, coil,
thermostats, relay etc.complete with necessary inlet & outlet connection.
The body of water cooler will be made from Stainless Steel.
364 Supplying and erecting approved make Instantaneous type water heater 58.00 Ea. 5639.84
with 3 Itr. capacity rust free container housed in ABS plastic body
insulated with glass wool / puff insulation and 3 Kw heating elements,
adjustable thermostat 300 C to 850 C with set to operate at 850 C (+ /-60
C) auto reset indication lamps, thermal cut-out, safety valve fusible plug
etc. Premium Category (Racold, A.o. Smith, Venus)
365 Supplying & erecting reverse osmosis (RO) water purification system 2.00 Ea. 217236.86
with M.S. powder coated pedestal frame, prefilter housing carbon filter
suitable buster DC pump, auto low & high pressure switches with
following size of LPH capacity & erected as directed [G] 1000 LPH with
3 phase Raw water pump of 1700LPH @ 3.0 kg/cm2 (1No - Kirloskar /
CRI/Lubi), Dual media filter 13" x 54" - 1 No, Micron catridge filter 20" x
4.0" - (1No), High pressure pump 1000LPH @ 11kg/cm2 - (1No -
Kirloskar / CRI / Lubi), RO Membrane housing with RO membrane of
40*40 -(4 Nos), RO pressure tube 4" x 2E - (2 Nos), 0 - 2400LPH
Rotameter (2 Nos). Dosing pump 0 -6 LPH (1 No) with 100 Ltr Dosing
tank - (1 No.), Recovery Rate 50%.
Section 01.00 Manual Fire Alarm System
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
366 SITC of Microprocessor based Intelligent Addressable Main Fire Alarm 1.00 Ea. 454500.00
Control Panel with 1 Loops modules and each loop capable of
supporting not less than 250 devices (detectors & modules should be in
any combination); Loop length up to 1.5 km, 8" Color LCD touch screen
display with bright colors to indicate alarms and events, 4 Nos of
Integrated Ethernet Ports & 2 Nos of RS 485 for networking, 200 Nos of
Soft programmable keys with status indicators for individual triggering of
NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch,
Smoke extraction Fans, Lifts etc. The Panel shall support 10000 history
logs in the non volatile memory (EPROM), power supply unit (230 ± 5%
V, 50 hz), 24 hrs back-up with 24 volt sealed maintenance free batteries
with automatic charger. The panel shall have seamless integration with
EVAC certified Public Address System and shall be complete with all
accessories. EN54 / Vds/UL Certification.
367 SITC of Addessable Manual call point with IP rating of IP 67 and with 10.00 Ea. 5555.00
inbuilt isolators as per NFPA 72 style 7 wiring requirements, with flexible
network structures & necessary fixing arrangements with key complete
as required. Shall be EN 54 / Vds/UL Certification.
368 SITC of Addressable Loop Powered Indoor Sounder cum Strobe with 15.00 Ea. 6565.00
inbuilt isolators as per NFPA 72 style 7 wiring requirements & with
5 levels, the sound pressure 92.1 dB(A), with flasher having
Synchronized flash rate of 1 Hz and Light intensity > 2 cd, should be
programmed from the panel. Shall be EN54 / Vds/UL Certification.
369 SITC of Addressable Control Module with inbuilt isolators as per NFPA 20.00 Ea. 3888.50
72 style 7 wiring requirements with a maximun switching current of 1A @
30V DC. Control module shall be used for to activate Conventional
Sounder cum Strobe / Sounders / Strobes. Shall be EN54/ Vds
Certification/UL.
370 SITC of Addressable Control Relay Module with inbuilt isolators as per 15.00 Ea. 3888.50
NFPA 72 style 7 wiring requirements with a maximun switching current of
1A @ 30V DC. Relay Control module shall be used for emergency
control functions including shutting down Fire dampers in AHU's, tripping
of AHU's, Fresh air fans, Ventilation fans, tripping of Access control
doors etc. shall be EN54/ Vds Certification/UL
371 SITC of Addressable Monitor Module with one input & one output 20.00 Ea. 3888.50
contacts, with inbuilt isolators & with 2 monitoring features, monitoring of
a line with EOL resistor, Potential free contact monitoring with Inbuilt
isolators for flow switches, Panic Bars & other Third Party Inputs. Shall
be EN54 / Vds/UL Certification.
372 SITC of 2 x 1.5 Sq.mm Fire Survival Armored Cable, for Fire Aalrm 500.00 Mtrs. 156.55
Device Looping & Power Supply. Outer Sheth Red color.
Section 02.00 IP CCTV SURVILLENCE SYSTEM
373 INDOOR IR DOME CAMERA 26.00 Ea. 27219.50
SITC of Progressive scan CMOS 4MP, 1/2.8”, 2048 x 1536, IP Bullet IR,
Cameras, Up to 30 fps @ 1080P, Progressive scan CMOS, 3 to 10mm
Verifocal, Colour: 0.08 lux at 33ms, B/W: 0.015 lux at 33ms and 0 Lux
with IR On Range: Adaptive IR Illumination 50 Mtrs, ONVIF Profile S,
Profile G, and Profile T Conformant, IK10,BI Directional audio, UL listed,
IP66 Rated casing (polyester polycarbonate blend) etc. PoE+ Power.
374 NETWORK VIDEO RECORDER 1.00 Ea. 263610.00
SITC of network video recoreder of 32 Channel, for camera recording @
25 fps, full HD for 30 Days compresion H.265.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
375 CLIENT STATION 2.00 Ea. 227250.00
SITC of Client Workstation with following configurations: Processor –
Intel i7 12th Gen, 3.10 GHz, Memory – Minimum 16 GB,Hard disks –
GB SDD, compatible OS for VMS, Network Card – 10 Gbit/s
network card, NVIDIA Graphic card of minimum 4 GB, Dual Port card for
connecting minimum of 2 LCD Screen complete with all accessories
required to complete the installation as per project requirements.
376 CCTV DISPLAY 2.00 Ea. 156550.00
SITC of wall mount 55" Professional Display unit Full HD/4K high
resolution diplay with 3XHDMI ports, 2XUSB Ports, 1X3.5mm Jack, 1X
External IR receiver etc.
Section 03.00 DATA, VOICE & WIRELESS ACCESS POINT SOLUTION
377 SITC of CAT6 UTP 23AWG Solid: Per Meter [Approved by Competent 8640.00 RMT 43.43
Authority i.e. not Below the rank of Executive Engineer]
378 Supplying & erecting approved make Telephone Cable electrolytic 100.00 Mtr. 467.63
copper conductor PE insulation twisted in two pairs & wrapped with
FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket
suitable for telephone wiring & confirming to C-DOT erected in existing
pipe of following size of conductors & nos.of pairs with necessary
connections. (b) Armoured [Jelly Filled] (3) Fifty Pairs
379 SITC of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath 100.00 RMT 50.50
[Approved by Competent Authority i.e. not Below the rank of Executive
380 SITC of Jack Cat 6 Keystone UTP [Approved by Competent Authority i.e. 260.00 Ea. 161.60
not Below the rank of Executive Engineer]
381 SITC of Face Plate - Dual (Keystone Jack, square) [Approved by 270.00 Ea. 101.00
Competent Authority i.e. not Below the rank of Executive Engineer]
382 SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag less 288.00 Ea. 200.99
[Approved by Competent Authority i.e. not Below the rank of Executive
383 SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less 260.00 Ea. 156.55
[Approved by Competent Authority i.e. not Below the rank of Executive
384 SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded 18.00 Ea. 4400.57
[Approved by Competent Authority i.e. not Below the rank of Executive
385 SITC of 24 x 10/100/1000BASE-T PoE ports 2.00 Ea. 31996.80
4 x Gigabit RJ45/SFP Combo ports
Advanced L2 switching and security features
L2+ Static Routing
Optional “standard mode” or “surveillance mode” management user
193 W PoE budget
[Approved by Competent Authority i.e. not Below the rank of Executive
386 SITC of 24 x 10/100/1000BASE-T ports 17.00 Ea. 15399.47
4 x Gigabit RJ45/SFP Combo ports
Advanced L2 switching and security features
L2+ Static Routing
Optional “standard mode” or “surveillance mode” management user
interface [Approved by Competent Authority i.e. not Below the rank of
Executive Engineer]
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
387 SITC of Maximum distance of up to 10 km 38.00 Ea. 4801.54
Hot-pluggable
Single-mode fiber
1000BASE-LX (IEEE 802.3z standard)
Duplex LC connector
MSA, RoHS-compliant [Approved by Competent Authority i.e. not Below
the rank of Executive Engineer]
388 Supply, Installation, Testing & Commissioning Wifi6 Access Point 1.00 Ea. 555500.00
controller for controlling upto 100WIFI access point & 500 Users
simultaniously.
389 SITC of LIU 12 PORT Rack Mount - Loaded (LC) SM [Approved by 4.00 Ea. 6901.33
Competent Authority i.e. not Below the rank of Executive Engineer]
390 SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m [Approved by 24.00 Ea. 779.72
Competent Authority i.e. not Below the rank of Executive Engineer]
391 SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m [Approved by 12.00 Ea. 1901.83
Competent Authority i.e. not Below the rank of Executive Engineer]
392 SITC OF 42U, 800mm x 1000mm server rack, with all accessories 1.00 Ea. 52520.00
393 SITC OF 15U, 500mm x 550 mm Wall mount network rack with all 5.00 Ea. 15150.00
accessories
394 Supplying, Erecting, Testing & Commissioning the Machine Room Less
passenger lift as per prevalling IS coad having following main features :
(c) The lifts of 6 and above passenger capacity shall be taken; Where in
Description “ Passenger Lifts” shall be mentioned.
[1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift
phase 440 V A. C. Permanent Magnet Synchronous motor of proper
rating with high efficiency shall be used.
[2] Micro processor based / PLC, ACVVVF, vector control drive with
encoder feedback closed loop system shall be used for lift car and door
demand response, UP/DOWN hall stops, Main, Up / Down Contactor
with overload and phase reversal relay and safety controls.
[3] Car with M S platform with bracings of adequate size and to sustain
the impact load cabin + passenger with safety factor of fire for steel and
side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will
be S.S. finishes with aesthetic appearance with LED ceiling lights. Car
flooring shall be of s/s 304 chaker plate design sugeested of engineer in
charge. of engineer in charge. Car doors shall be of stainless steel grade
304, hairline finish with centre opening / telescopic automatic doors. Car
panel will also be S.S. 304 finished with emergency stop device,
mechanical door safety device, facility of auto/ attended mode. All car
panel buttons and all floor switches must be with brail language as per lift
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
[4] All landing doors must be fire rated for 2 hour shall be fully automatic
centre opening/ telescopic opening made of hairline finish steel grade of
304 with key holes and infrared curtains with Unlocking facility from
[5] Appropriate battery operated emergency light in the car along with
alarm switch shall be provided. Also, Emergency Light & Fan should start
immediately without any Time Delay as soon as power fails.
[6] Digital scrolling indicator system for up-down arrow along with floor
position indicator shall be provided inside the car and at all floors.
[7] Full height infra red curtain with multiple cross / crossing light beams
shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided accordingly of
passenger capacity with Manual Rescue Operation (Manual Cranking
Facility).
[9] Audio visual indication in the lift car showing over loading shall be
provided such that doors kept open till excess load is removed.
[10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep timer shall
be provided.
[12] Voice annunciator with suitable music shall be provided in lift car.
[13] Self diagnostics system for operational and safety parameters shall
be provided in control panel.
[14] Mechanical over speed governor with governor calibration as per
actual site parameters and submission of calibration certificate
submission, door key holes in the floor doors, fireman switch shall be
[15] Lift machine hoisting arrangement in the lift machine room and
monkey ladder for lift pit should be provided by the lift agency, along with
the other steel structure works, foundations for the machine etc…
[16] In the hoist way fascia plate shall be provided without any extra cost,
where ever required as / if directed by engineer in charge.
[17] Permanent wiring with necessary safety devices like RCCB in all
circuit, Over Voltage Under Voltage protection and THD eliminator in
circuit for lift machine room and lift well with proper numbers of light
points, with fixtures, exhaust fan and plug points shall be provided by the
agency. Only 3 phase Power Supply shall be made available by
department in lift machine room. Necessary Earthing as per Lift
Act/Rules shall be arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in lift shaft and
machine room related to erection of lift shall be made by lift agency
without any extra cost. (granite/marble fixing around all landing door
openings are not in lift agency’s scope)
[19] Agency has to provide all working drawings and documents and
liaison services for obtaining all necessary permission from lift inspector
and other authorities.
[20] acrylic transparent licence/display A4 size holder in lift car
[20A] As per statutory requirement of Govt. of Gujarat lift & escalator act
2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor.
4. carrying out third party lift inspection during/after lift erection and
provide report by third party authorized by concern licensing authority.
5. Agency has to provide third party insurance upto completion of free
maintenance period and submit the document for the same.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
[21] Car Panel Operating Buttons with floor position indicator/buttons
must be of Auto Glow type clearly visible when view from inside cabin.
[22] For Physically Handicapped person Full Length Handrails of hairline
finish steel grade of 304 should be provided at appropriate height on the
Rear & Side Wall Panels in Lift Car.
[23] With Necessary KVA rating voltage controlled Stabilizer suitable for
your controller, drive and all equipments of lift.
[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope
of work which rating is sugested by CEICED Department (electrical
Inspector)
SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category
[25] Advanced control system dual 64 bit embedded microprocessor
with CANBUS Serial Communication mode including Regenerative
power efficient operation,on site programming facility, Anti nuisance, Pte-
opening, BMS/RMS with necessary online real time monitoring system
having necessary connectivity for remote monitoring & other suitable
supporting hardware & software devices to fulfil the purpose.
[26] Floor Indication LCD Display with call registration & brail mark with
arrival gong and hall lantern & TFT Screen in the car with MP3 Voice
Announcer.
[27] CAR Panel should be Scratch resistive SS Moonrock finish / Hair
Line / Honeycomb for car and all Doors, All landing doors must have fire
rating up to 2 hours and car door must have multi-level crisscross beam
door protection.
[28] To & from communication system & wiring (i.e. car, control room &
guard room) and Each elevator are equipped with remote monitoring
system. agency has to provide mobile app and user id and password for
monitoring
6 passengers. Ground Floor + 4 upper floors with Rated Speed of 1 4.00 Each 1392848.58
m/sec with micro price / PLC control and ACVVVF. drive
(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached
herewith. Prem. Cat.
395 SECTION 1.00 CABLES & ACCESSORIES 900.00 Mtr. 190.89
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
(B) 4 core 25 Sq. mm
396 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 2500.00 Mtr. 46.46
kv grade ISI marked copper wires of following size to be erected as
directed. (e) 1.50 Sq.mm 3 core round PVC sheathed.
397 Providing and fixing heavy duty flange type brass cable gland with rubber 6.00 Ea. 51.51
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc. for following size of cables. (E) 2 to 4 core 25 Sq. mm
398 Making trench in soft soil of suitable width of 90 cm deep for laying cable 5500.00 Mtr. 55.55
or locating the fault all over the run and back filling the same and
making the surface as normal ground.
399 Providing & laying approved make Double walled corrugated pipes 6000.00 Mtr. 73.73
(DWC) of polyethylene (conforming to IS 14930 II) with necessary
connecting accessories of same material at required depth in existing
trench for laying of cable below ground / road surface for enclosing
cable (B) 63mm outer dia
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
400 Providing & laying approved make Double walled corrugated pipes 1200.00 Mtr. 137.36
(DWC) of polyethylene (conforming to IS 14930 II) with necessary
connecting accessories of same material at required depth in existing
trench for laying of cable below ground / road surface for enclosing cable
(D) 120 mm outer dia.
401 SECTION 2.00 SWITCHGEARS & DISTRIBUTION BOARDS 394.00 Ea. 112.11
MINIATURE CIRCUIT BREAKERS.
Providing and erecting Miniature circuit breaker single pole 6A to 25A
suitable to operate on 240 V A.C. system and having breaking capacity
10 KA to be erected in existing box confirming to IS 8828/1996 with ISI
Mark. Cat.III
402 CUPBOARDS. 3.00 Ea. 16691.26
Supplying & erecting IP 55 grade following size section pillar fabricated
from joint less M.S. Sheet with angle iron legs made from jointless M.S.
Angle with cable clamps to be buried in ground to have appropriate
erection to work uniform until erected with cement concrete foundation
and 45 cm high bricks work finishing with plaster etc. hinged double door
internally supported on both side, with internal and outside looking
arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle
of Two Nos. one is welded and other with nut and bolt for erecting
Bakelite sheet. Painting the Section Pillar inside and out side with three
tank powder coated paint. section pillar roof should be without joint with
water leakage proof & tested as per IP 55 test & followed by IS 2147 of
1962 (A) 150 x 90 x 75 cm section pillar fabricated from 14 Gauge MS
Sheet with angle iron legs 95 cm long made from 40 x 40 x 6 mm thick
403 Supplying & erecting approved make Digital time switch having lithium 30.00 Ea. 3168.37
cell 6 years operative and operate battery backup 1 channel day clock
with 14 memory programme, suitable to operate on 240V + 5%, 16A
with, floating contacts Minimum switching setup time 1 minimum & LCD
display. Also comprised permanent ON/OFF switching. Programming
switches & housed in fire proof thermoplastic enclosure & transparent
cover erected as required with necessary connection erected as directed.
404 Supplying & erecting power contactor, AC3 duty for time switch complete 30.00 Ea. 857.49
erected as per direction Cat III [C] 4 pole 440V 16 Amp.
405 SECTION 3.00 LIGHT FIXTURE AND FAN 29.00 Ea. 4819.72
ALL LIGHT FIXTURES SHALL COMPLY TECHNICAL PARAMETERS
AS MENTIONED BELOW:
1.The Fixture and driver should be of same make only.
2.The manufacture should provided Complete TTC and quality
assurance Plan for Fixtures during supply.
3.The Warranty letter for 5years should be provided by the Manufacturer.
4.Fixture should be warrantied for 5yrs for 50,000 hrs @ L70 ( LM79
from NABL accredited Lab to be submitted along with Letter from
Manufacturer for the Life class claim of L70 @ 50,000 hrs.)
5.The product should be Manufactured in India (all the Components
should be manufactured in India except the Led source which can be
imported. (Approved Led source Nichia , Cree, Lumileds , Osram Only
the Invoice copy of the Purchase of Led modules from these
manufacturer's need to be submitted).)6. PF >=0.9 and THD <=15%
(Certificate need to be submitted from NABL Accredited lab)
7. The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
8. The manufacturer should have its own NABL accredited Laboratory.
Supplying and erecting LED street light / Flood light fittings with High
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V, Power Factor more than 0.95, THD < 10%, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED
driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates)
(NOTE: Below description have shown ranges of Wattage capacity of
between the ranges shown) (C) Post Top Lantern LED fitting comprises
of finish cast aluminum spigot and spun aluminum canopy fixed with opal
polycarbonate, pipe arrangement for vertical mounting driver and
accessories wired upto terminal block. IP 65. Cat-III (ii) 32-40W
406 Supplying and erecting LED street light / Flood light fittings with High 339.00 Ea. 3345.12
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics / lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to
5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED
driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates)
(NOTE: Below description have shown ranges of Wattage capacity of
between the ranges shown) (A) Street Light (IP-65), Surge protection -
4KV integral and light must have 440VAC line supply with over-voltage
protection. (i) above 36 to 48 watts Cat-III
407 Supplying and Installation of Approved make Integrated LED Solar light 5.00 Ea. 22358.37
fitting comprising in built Poly crystalline solar panel, Lithium-ion 3.7 V
battery, LED CRI Greater than 70, CCT-6500K, 80 lum/watt all housed in
Extruded Aluminium body,with motion sensor & auto on -off device
erected on existing pole with following specifications. (C) 18 watt LED
light, with 22 W Solar panel, 3.7 V 39500 to 40500 mAh battery, 1250-
1350 lm luminus flux,suitable for mount on 3.5 to 4 mtr height pole. (IP-
408 Supplying and erecting LED street light / Flood light fittings with High 12.00 Ea. 7266.95
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to
5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens / watt.
LED driver efficiency > 85 %. (fittings required LM-79 & LM-80
certificates) (NOTE: Below description have shown ranges of Wattage
capacity between the ranges shown) (B) Flood Light (IP-65), Surge
protection -4KV integral and light must have 440VAC line supply with
over-voltage protection. (iv) above 90 to 120 watts Cat-lll
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
409 Supplying and erecting LED street light / Flood light fittings with High 30.00 Ea. 9647.52
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics / lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V, Power Factor more than 0.95, THD < 10%, CCT 3000 K to
5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED
driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates)
(NOTE: Below description have shown ranges of Wattage capacity of
between the ranges shown) (B) Flood Light (IP-65), Surge protection -
4KV integral and ,Light must have 440VAC line supply with over-voltage
protection. (vi) above 160 to 200 watts Cat-lll
410 Supplying and erecting LED street light / Flood light fittings with High 113.00 Ea. 3161.30
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V, Power Factor more than 0.95, THD < 10 %, CCT 3000 K
to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt.
LED driver efficiency > 85%. (fittings required LM-79 & LM-80
certificates) (NOTE: Below description have shown ranges of Wattage
capacity between the ranges shown) (b) LED Bollard fittings of minimum
height 600 mm & dia.100mm having polycarbonate clear/milky diffuser
mounted on 3mm thick aluminium finished powder coated pipe with base
plate 160 x 160mm with erection by M8 x 75mm fastner with required
RCC foundation. IP65 for 15watt, surge-4kv- Cat-III
411 Supplying and erecting approved make Octagonal pole made from HR 30.00 Ea. 14010.72
sheet steel. The pole should be made as per IS and shall be coated with
hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local
wind speed with integral Junction box consist of terminal plate of min
6mm Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement for cable termination to be
erected with Suitable foundation (Included) as per details given by
manufacturer considering site requirement. (G) 8 Mtr. Long 70 mm top x
155 mm bottom dia, 3 mm thickness with 260mm x 260mm x 16mm
base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts
Approx Pole weight 84 kg
412 Supplying and erecting approved make Octagonal pole made from HR 279.00 Ea. 8192.11
sheet steel. The pole should be made as per IS and shall be coated with
hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local
wind speed with integral Junction box consist of terminal plate of min
6mm Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement for cable termination to be
erected With Suitable foundation (Included) as per details given by
manufacturer considering site requirement. (D) 6 Mtr. Long 70 mm top x
135 mm bottom dia, 3 mm thickness with 200mm x 200mm x 12mm
base plate, 4-M20 Bolts and 600mm long J-Bolt. Approx Pole weight
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
413 Supplying and erecting approved make Octagonal pole made from HR 29.00 Ea. 5556.01
sheet steel. The pole should be made as per IS. and shall be coated with
hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local
wind speed with integral Junction box consist of terminal plate of min
6mm Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for MCB
Mounting, stud type terminal and arrangement for cable termination to
be erected With Suitable foundation (Included) as per details given by
manufacturer considering site requirement. (B) 4 Mtr. Long 70 mm Top x
130 mm bottom dia, 3 mm thickness with 200mm x 200mm x 12mm
base plate, 4-M16 Bolts and 450mm long with necessary G.I. J Bolts.
Approx weight 37 kg
414 Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' 338.00 Ea. 823.15
grade G.I. pipe with necessary coupling buch buried in specially
prepared earth pit & G.I. earth wire of 8 SWG erected & connected as
directed (For panel)
415 For using salt and charcoal / coke as required for pipe type earthing. 338.00 Ea. 171.70
416 Providing and erecting street light pole bracket comprising main B Class 42.00 Nos 758.51
MS pipe of 4.2 cm/require outside dia. complete with suitable B Class
M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /
80mm. / require size pole top having sufficient fasteners for fixing the
brackets and having spread of 1 mtr. length with suitable rise as per site
condition & suitable welded stiffener reducer and nipple with check nut
complete painted with one coat of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of arms. [B]
Double Arm Bracket 1 Mtr
417 Providing and erecting street light pole bracket comprising main B Class 254.00 Nos 561.56
MS pipe of 4.2 cm/require outside dia. complete with suitable B Class
M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /
80mm. / require size pole top having sufficient fasteners for fixing the
brackets and having spread of 1 mtr. length with suitable rise as per site
condition & suitable welded stiffener reducer and nipple with check nut
complete painted with one coat of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of arms. [A] Single
Arm bracket 1 Mtr
418 Providing and erecting street light pole bracket comprising main B Class 2.00 Nos 955.46
MS pipe of 4.2 cm/require outside dia. complete with suitable B Class
M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /
80mm. / require size pole top having sufficient fasteners for fixing the
brackets and having spread of 1 mtr. length with suitable rise as per site
condition & suitable welded stiffener reducer and nipple with check nut
complete painted with one coat of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of arms. [C] Three
Arm Bracket 1 Mtr
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
419 Supplying, erecting, testing, commissioning approved make M.S. 5.00 Ea. 141616.14
Polygonal High Mast Pole having following general Specification.
(a) Polygonal Section fabricated from M.S. Plate confirms BSEN
& Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985)
Lantern carriage with ring and rubber lines for erection of luminaries of
suitable site.
(b) Maximum telescopic section not more than four
(c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For
16 mtr and above size)
(d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor =
No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable
Unarmoured.
(e) Bottom most section suitable for mounting reversible motor and
switchgears having door not more than 1400mm x 300mm with
waterproof gasket & hinges & locking arrangement.
(f) Pole structure comprises suitable size of reversible motor, cable and
necessary switchgears with control panel. (g) bottom section shall have
suitable size of thickness supports ribs foundation bolts nuts etc.
(h) Item not comprises the cost of lanterns.
(i) Necessary Cement Concrete foundation as per IS including testing &
commissioning of the entire structure for following size of High Mast poles
[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of
Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm
x 20 mm thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos.,
Suitable for mounting Fitting of Light - 6 Nos.
420 SECTION 1.00 Video Surveillance Solution 52.00 No. 26664.00
S/I/T/C of 4MP IP Network TDN IR Bullet Camera, 1/2.8" CMOS, 4 MP
@ 25fps, Min. Illumination required 0.05 lux , WDR>120dB, Min. Pixels
2560 x 1920, Adavance Video Compression technology such as H.265
HEVC / H.264 / MJPEG, Smart Codec,Verifocal - 2.7-13.5 mm , P-IRIS,
HLC, 3DNR, Minimum Edge Intelligence Video Analytics: Motion
Detection, Video Tampering, Intrusion, Loiter, Line crossing, Unattended
object, Missing object, Face detection; 5 nos Privacy Mask, 4 IR LEDs
Smart IR with upto 60m IR distance, Stream encryption, AES-128/256,
PCI Data Security Standard compliance, FIPS Chipset Built-In, 256GB
SD card support with SD card encryption, Dual channel Audio G.711a /
G.711 Mu / G.726, Alarm: 2 In/ 1out, In-built Heater; PoE+ (802.3 at) and
12V DC/24V AV; IP 66 / IP 67 / NEMA 4X, IK10, Having Operating temp
range : –40°C to 60° C. Certifications: ONVIF Profile S, G compliant, UL,
CE (EN 50130-4 & EN 55032) , FCC Part 15 & RoHS compliant along
with mounting Brackets suitable for Pole / Wall mounting & required
accesories. Make :- PRAMA-HIKVISION / HONEYWELL / SONY /
421 S/I/T/C of Network TDN Low-Light IR PTZ Camera with auto tracking, 12.00 No. 72103.90
1/2.8" CMOS, 4 MP @ 25fps, Min. Illumination required 0.005 lux @
F1.6 (color) or better, 120dB WDR, Min. Pixels 2560 x 1440, Triple
stream, 4mm –180 mm 45x motorized focus & zoom lens, BLC, HLC,
3DNR, Defog, Electronic Image Stabilitzation, 24 Privacy Mask,
Presets, Internal / External Illuminatrion range with upto 150m IR
distance, 265GB SD card support, Dual channel Audio, Alarm: 2 In/1 out,
PoE+ and 12V DC/24VAC, IP 67, IK 10 vandal proof, Having Operating
temp range : –30°C to 70° C. Profile S, G and Q compliant, UL, CE,
FCC certified along with mounting Brackets suitable for Pole / Wall
mounting & required accesories including Power Supply adaptor for
camera. Make :- PRAMA-HIKVISION / HONEYWELL / SONY /
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
422 Supply, Installation, testing & Commissioning of 64Ch NVR with Up to 12 1.00 No. 105545.00
Megapixels resolution recording, Support 2-ch HDMI, 2-ch VGA, HMDI1
resolution, Up to 64 IP cameras can be connected with 320M incoming
bandwidth & 256M outgoing Bandwidth, Up to 8 SATA interfaces,
Support HDD hot swap with RAID0, 1,5,6,10 storage scheme
configurable Make :- PRAMA-HIKVISION / HONEYWELL / SONY /
423 S/I/T/C of color high resolution LED TV comprising of 55 inch display, full 2.00 No. 83325.00
HD, HDMI input provision; complete with all supports and accessories.
Make:- SAMSUNG / LG / PANASONIC.
424 S/I/T/C of 12TB Survillence Hard Disk minimum 10K RPM, including 4.00 No. 21109.00
fixing accessories and cable termination with required, complete in all
respect as per instruction of engineer in-charge. Make :- PRAMA-
HIKVISION / SAMSUNG / WD
425 SITC of 24 Port Fiber Un Managed Network Switch, rack mount with 3.00 No. 277750.00
compleate accessories. (HP/ Cisco / D-Link Make)
426 SITC of 24 Port LIU, LC Duplex with pigtail, mounting cassate, gland etc. 3.00 No. 24442.00
with comlpeate accessories. (D-Link / Digilink / AE Connect Make)
427 SITC of 6 Core SM OFC Cable, Outdoor Burried type, corrogated steel 15000.00 mtr 76.66
tape. (D-Link / Digilink / AE Connect Make)
428 SITC of SM OFC GB Module (D-Link/Digilink/AE Connect) 50.00 Nos. 13332.00
429 SITC of Single port Media converter OFC to copper 10/100/1000 Mbps. 50.00 Nos. 13332.00
(D-Link / Digilink / AE Coonect Make)
430 SITC of CAT6 UTP Patch Cord 3 Mtr. (D-Link/Digilink/AE Coonect Make) 50.00 Nos. 305.53
431 SITC of Out door mounting box 250 x 250 x 150 MM, IP 66, Mounting on 50.00 Nos. 7221.50
Pole for housing, optical converter, Including 230VAC to 12VDC 1A
432 SITC of 27U, floor standing (upto size - 600mmW x 600mmD) 19" 1.00 Nos. 37551.80
Networking Enclosure as per specification and complete with all
accessories
433 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 7500.00 mtr 46.46
kv grade ISI marked copper wires of following size to be erected as
directed. (e) 1.50 Sq.mm 3 core round PVC sheathed
Total Rs.
i.e. Rs. Twenty Two Crore Eighty Nine lacs Nineteen thousand Four hundred Sixteen and Ten paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
is a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
5. The Contractor will have to submit the all required mix design at his own cost before execution as
directed and to be approved from the Engineer in charge.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and
Executive Engineer
R & B Division,
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
NIVIDA.pdf
PQ.pdf
BOQ.pdf
Drawings.pdf
Electrical.pdf
GRs.pdf
Lift.pdf
SBD.pdf
SCH OF TEST.pdf
SPECI.pdf
STD SPECI.pdf
REV - BOQ.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .