Construction Community Centre at Shanti Nagar at Ward No.20

Earth work excavation in all kind of soil within 50 m.initial lead and 1.5 m lift including rough dressing and levelling the bed and depositing the soil within initial lead and lift as per direction of the Engineer-in-Charge.

Filling in foundation and plinth & trenches with sand well watered and rammed including cost and conveyance of all material to site all complete as per direction of the Engineer-in-Charge.

Cement Concrete (1:3:6) with 4 CM size HGCB stone including cost of all materials and labour etc. complete in all respect as per direction of the Engineer-in-Charge.

Fly Ash bricks masonry in CM (1:4) using fly ash brick of size 25cm x12cm x 8cm in Foundation & Plinth as per direction of the Engineer-in-Charge

2.5cm thick A.S. flooring with C.C. (1:2:4) including punning using 12mm to 20mm guage h.g. chips. (Per Sqm.) as per direction of the Engineer-in-Charge.

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.Column Base ,,RccPlinth beam

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.Ground floor( Below GL - 0.5 & Above GL - 3.5),Hanging Beam

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.1st Floor

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.RCC lintel,Ground Floor 1

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge1st Floor

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.RCC Window Chajja

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.Ground Floor 1 Roof slab (Cornice - 0.15 One Side),Ground Floor 2 Roof Slab

RCC M20 work with 20mm & down graded size black h.g.c,b chips including hoisting & laying including cost of all materials and labour etc.complete in all respect as per direction of the Engineer-in-Charge.1st Floor Roof Slab (Cornice - 0.4)

Suppling,fitting & placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance of all materials etc. all complete as per direction of the Engineer-in-Charge.Steel @ 0.85 qtl/ cum of RCC vol.(as per item no 4)

Suppling,fitting & placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance of all materials etc. all complete as per direction of the Engineer-in-Charge.Steel @ 0.85 qtl/ cum of RCC vol.(as per item no 4)

Fly Ash bricks masonry in CM (1:6) using fly ash brick of size 25cm x12cm x 8cm in superstructure including cost conveyance, royalties of all materials etc all complete as per direction of the Engineer-in-Charge.Ground Floor wall

Fly Ash bricks masonry in CM (1:6) using fly ash brick of size 25cm x12cm x 8cm in superstructure including cost conveyance, royalties of all materials etc all complete as per direction of the Engineer-in-Charge.1St Floor wall

16mm thick cement plaster (1:6) over brick work including cost, conveyance, royalties of all matertials etc complete as per direction of the Engineer-in-Charge.Ground Floor wall

16mm thick cement plaster (1:6) over brick work including cost, conveyance, royalties of all matertials etc complete as per direction of the Engineer-in-Charge.1St Floor wall

12mm thick cement plaster (1:6) over brick work including cost, conveyance, royalties of all matertials etc complete as per direction of the Engineer-in-Charge.

12mm thick cement plaster (1:6) over brick work including cost, conveyance, royalties of all matertials etc complete as per direction of the Engineer-in-Charge.

Supplying, fitting & fixing of vitrifed floor Tile of size 600 x 600 mm of approved make laid on 20mm thick cement mortar (1:4) & finishing joints with white cement etc as per direction of the Engineer-in-Charge.1st Floor Room

Supplying, fitting & fixing of vitrifed floor Tile of size 600 x 600 mm of approved make laid on 20mm thick cement mortar (1:4) & finishing joints with white cement etc as per direction of the Engineer-in-Charge.Dado

Providing, supplying, fitting, fixing up aluminium Door with OEL andodlize Al. Door section of 9202 as vertical member, 9201 as top member and 12mm thick pre laminated boarde fixed on door frame by means to tapered clip No.4660 and the frame to be completed by mens of jointing angle No.1855 including all cost of labour T&P, hire charges of drilling all cost of labour machines charges etc. as per direction of the Engineer-in-Charge.

Supplying, fitting, fixing up window (Sliding type) made up aluminium Section 151-154, 151-155 as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. as per direction of Engineer-in-charge. Data for 4'-0" x 4'-0"=16 Sft or 1.49 Sqm. as per direction of the Engineer-in-Charge.

Supplying, fitting & fixing of M.S. window grill of approved design as per direction of the Engineer-in-Charge.Window ( 6x0.9x1.2) =6.48sqm

Supplying of MS grill gate, MS angle chowkhat of approved for Windows welded with MS sheet shuters of 18 to 20 gauge thick, openable and electrically welded with all necessary fittings including cost of all materials, labour, T&P,transportation to worksite etc all complete in all respect.W Grill ,Ventilator

Painting 2 coats with any approved Enamel paint on new iron work including cost of all labours and materials etc all complete.

Finishing wall surface with acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour, T&P etc. complete. as per direction of the Engineer-in-Charge.

Priming 1 Coat with any approved Primer with cost of all materials, taxes, labour. T&P etc. complete

Wall painting two coats with distemper of approved shade to give an even shade including cost of materials as per direction of the Engineer-in-Charge.

Finishing to the exposed surface of wall with weather coat of any approved shade on new work two coats to give an even shade including cost of weather coat all cost of labours and T&P etc. complete as per direction of the Engineer-in-Charge.

Supplying fitting & fixing of Electrical & P.H items as per direction of the Engineer-in-Charge.

Construction of display board at work site with photo

Adding GST18%

Please Enable Macros to View BoQ information