Repair and Maint of Internal wiring fitting fixture and allied works in OP NP RP and MES area at AF station Halwara

Amount

Taking down aluminium / copper point wiring with surface/ concealed stove enamelled steel/ PVC conduit or wooden batten ( light, fan, socket, or power ) including sunk in cast iron / pressed steel terminal boxes such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc complete.

M & L for concealed Point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in PVC conduit not less than 19/20 mm dia with all fittings shunk in MS Pressed steel terminal boxessuitable depth and 1.6mm thick (duly painted with two coat of anticorrosive paint outsite and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc complete all as specified.

All as per item No. 2 above but for ceiling Fan, one point controlled by one switch on the same board.

All as per item No. 2 above but for Exhaust Fan point, one point controlled by one switch on the same board.

All as per item No. 2 above but for socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 2 above but for socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 2 above but for call bell point, one point controlled by one switch.

All as per item No. 2 above but with 4.0 sq mm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

M & L for concealed Point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in existing PVC / ERW steel conduit with all fittings shunk in MS Pressed steel terminal boxessuitable depth and 1.6mm thick (duly painted with two coat of anticorrosive paint outsite and Aluminium paint inside) with top cover 2.8 mm thick Hylem sheet cover for mounting of switches/sockets and fan regulators etc complete all as specified.

All as per item No. 9 above but for ceiling Fan, one point controlled by one switch on the same board.

All as per item No. 9 above but for Exhaust Fan point, one point controlled by one switch on the same board.

All as per item No. 9 above but for One socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 9 above but for call bell point, one point controlled by one switch.

All as per item No. 9 above but with 4.0 sqmm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

M & L for Surface Point wiring for light points with PVC insulated unsheathed FRLS two run of 1.5 Sqmm multi stranded copper conductor cable 1100 volts grade & one run of 1.5 Sq mm multi stranded copper conductor cable as continuous earth wire drawn in surface PVC conduit/ PVC casing & caping with PVC gang box suitable ways fixing on wall with all fittings/ accessories for mounting of switches/sockets and fan regulators etc complete all as specified.

All as per item No. 15 above but for ceiling Fan, one point controlled by one switch on the same board.

All as per item No. 15 above but for Exhaust Fan point, one point controlled by one switch on the same board.

All as per item No. 15 above but for socket outlet 5 Amps controlled by one switch on the same board.

All as per item No. 15 above but for socket outlet 5 Amps controlled by one switch on independent board.

All as per item No. 15 above but for call bell point, one point controlled by one switch.

All as per item No. 15 above but with 4.0 sqmm for one 15 Amps socket outlet on independent board and 2.5 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

Supply and fixing Switch piano type one way 5 amps 240 volts complete.

Supply and fixing Bell push flush type 5 amps 240 volts complete.

Supply and fixing Socket outlet 5 pin 5 Amps flush type complete.

Supply and fixing for Switch piano flush button single pole one way 15 amps 240 volts complete.

Supply and fixing for Socket out let 2 in 1, 6 pin, 5 and 15 amps multi purpose flush type, 230 volts.

Supply and fixing electronic fan regulator step, 250V flush type on the exiting phenolic laminated sheet etc.

Supply and fixing ceiling rose surface bakelite 3 terminals.

Supply & fixing Lamp holder PVC/ Polycarbonate insulated body with back plate for angle/batten fittings complete.

S &F LED light fitting, 20 W, 4 ft long 230V, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre-wired complete all as specified.

Supply and fixing recess mounting LED slim ceiling light with extruded aluminium housing and milky diffuser with 36W, 2'X2' (600X600X11mm) LED slim panel complete all as specified.

Supply and fixing LED Mirror light fitting 1 Feet long 5 Watt LED Batten light for mirror and as wall light application complete

Supply and fixing LED light fitting 2 Feet long 10 Watt LED Batten light for mirror and as wall light application complete

Supply and fixing LED flat Bulkhead fitting 10 watt complete and fixing to wall / celing including fixing arrangement with clamps/ scrue/nuts/ bots /washers etc and connecting complete.

Supply and fixing of building security light fitting 35 W LED New generation Energy Saving & Environment friendly long life versatile pressure die-cast aluminium IP-66 roadwayluminars with high power LEDs as light source and electronic drive including connecting complete.

Supply and fix security light mounting bracket, GI pipe 40mm dia medium grade for mounting bracket bent to shape 0.6 meter length and fixing arrangement with two Nos of MS clamps set, nut, bolts, washers, and applying two coats of aluminium paints over one coat of Zinc oxide primer complete all as directed.

Supply and fix in replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size for up to 350mm sweep with all accessories, fixing on wall complete all as directed.

Supply and fix in replacement of MS sheet 1.00 mm thick, louver shutter for exhaust fan suitable size for 350mm to 450mm sweep with all accessories, fixing on wall complete all as directed.

M&L and fixing Decorative LED gate light 40 Watt, made up of high grade unbreakable polycarbonate material suitable for mounting on pipe dia 40/50 mm including connecting and fixing on post top with necessary fixing arrangement complete all as directed.

M&L Flexible cord copper conductor of size 1.00 Sqmm, twin core, flat cable for connection to light fitting/fans from ceiling roses complete as in repair all as specified.

M&L for Sub main wiring with PVC insulated cable of size 2 X 4.0 Sqmm + 1 X 2.5 Sqmm earth wire multi stranded copper conductor drawing into and including heavy duty 25mm dia surface PVC conduit and continuous earth wire complete and making good disturbed surfaces of wall/ floor etc.

All as per item No.41 above but sub main wiring of size 2 X 6 Sqmm + 1 X 4.0 Sqmm as earth wire

Supply and fix sheet metal enclosure with metal clad socket & plug top and MCB single pole neutral 32 Amps complete all as specified and directed.

S & F Electric Meter cover box made of UV stabilized transparent polycarbonate, unique arrangement for pilfer proof interlocking with hinge type box, sealable optical port provision, IP 54 requirment for environmental protection, push fit & hinge type top cover complete

Supply and fixing Loadline Vertical TPN DB prewired distribution board double door, 8 way TPN-DPX 12-63, one No MCCB 100 Amps as incomer and four Nos of MCB TPN 40 Amp for outgoing, double door type sheet metal enclosure 415V with 63 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB SPN distribution board, 12 way, Double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush concealed in wall including taking out old DB's and chases wall for fixing DB and making good distributed wall/surfaces to match with existing specification.

All as per item No.46 but MCB DB, 8 Way.

All as per item No.46 but MCB DB, 4 Way.

All as per item No.46 but MCB DB, 2 Way, single door.

Supply and fixing of MCCB 100 Amp, four pole 415 Volts, breaking capacity 25 KA, fixed thermal & magnetic setting with extended terminals connecting lugs complete.

Supply and fix MCB TPN 'B' series, 415 volts, 50Hz, 63 Amps, suitable for high inrush current loads complete all as directed.

Supply and fix 'B' series MCB SPN 40/32 amps, 240 volts, 50Hz.

Supply and fix 'B' series MCB SP 6 to 32 amps, 240 volts, 50Hz.

Supply and fix 1100 Volts grade heavy duty service line cable PVC insulated stranded aluminium conductor, twin core cable, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or cicrular of aluminium condoctors size 10 Sqmm stranded conductor all as directed.

All as per item No.54 but stranded aluminium condoctors size 6 Sqmm.

Supply and fix of PVC flexible copper conductor cable of size 2.5 sqmm, 3 core as connections to MCB/socket to geysers all as specified.

Supply and fix door bell, Ding Dong AC, 230 volts, single pole

kailu construction co

BEHL AND COMPANY

R N Enterprises

JAI DURGA CONSTRUCTION COMPANY