REPAIR TO DECORATIVE CEILING/WALL PANELLING AND OTHER MISC WORKS OF GUEST ROOMS OF OFFRS MESS AT DGRE RDC UNDER AGE I R AND D MANALI

Amount

S&F in repair for synthetic wooven flooring carpet weight 1.5kg/sqm fixed with approved rubber base adhesive as in floors complete all as specified and directed by Engr-in-Charge. Make :BAJAJ/Unitex Carpet/Responsive Industries Ltd/LG.

S&F in repair for 1.5mm thick PVC sheets laminated plain coloured marble mosaic or molted finish laid with rubber based adhesive in floors and skirtings etc complete all as specified and directed by Engineer-In- Charge.Make :LG / M/s Krishna Vinlye/Armstrong

S & F in repair for wooden coloured interlocking tiles 1215 X 168 X 8 mm thick rectangular in floor/ dado laid over existing floor with foam sheet of approved best quality including joint/ polished end covering strip of make Kajaria/ Action tesa, complete all as specified and directed by Engineer-In- Charge.

M & L for Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed by Engineer-In- Charge

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-In- Charge.

Dismantling wall and ceiling board,of any description complete all as specified and directed by Engr-in-Charge

S&F, false ceiling with 4mm thick E-board Everest make white prelaminated set embosed rainforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire including two coat of plastic emulsion paint over one coat primer complete all as specified. Note. All exposed surface of grid work shall be powder coated white.complete all as specified and directed by Engr-in-Charge

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in Wall/ceiling complete all as specified and directed by Engr-in-Charge.

M&L for 12 mm thick perforated particle board of any size fixed with screws to timber frame as in ceilings complete all as specified and directed by Engr-in-Charge( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition.complete all as specified and directed by Engr-in-Charge.

M&L for 4mm thick Asbestos cement plain boards as in ceiling fixed with screws to framework complete all as specified and directed by Engr-in-Charge( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition.complete all as specified and directed by Engr-in-Charge.

Dismentling timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section.complete all as specified and directed by Engr-in-Charge.

S&F, plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 13 and not Exc 25 Sqcm complete all as specified and directed by Engr-in-Charge.

S&F, plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 3 Sqcm and not Exc 6 Sqcm complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new surfaces and applying three coats of white wash as in ceiling complete all as specified and directed by Engr-in-Charge.

Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

S&F mild steel of joist channel, angle, Tee section, or hollow tubes (rectangle/square/round) fixed indepently without connecting plates confirming to Grade Fe 410-0 or Gde E-250 quality( A) complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engr-in-charge.

NATHU RAM AND SONS