Replacement of Non functioning Existing Non Clog Dry Pit Centrifugal Pump motor set no. 1 of GR II at Indraprastha under GAP Phase I with allied electromechanical works under MEDB, PHE Dte. in Murshidabad.

Amount

Engagement of labour, majdoor , mathor , sand bag as required number for blockedge of inlet feed water channel for a specific duration without hampering drianedge system as per direction of EIC. Dismantling part by part then Withdrawing of existing Non functioning pump motor set from Under cut of pump house by proper lifting arrangment after disconnecting all pipe line & power connection, earthing connection ETC as per direction of EIC

Supply, Delivery and storage at site of Centrifugal Vertical Execution Sewage Application Pump with Transmission Shafts, Plumer Block, Coupling, Campanion Flange, foundation bolt etc. having the following specification and as per NIT. (For pumping Drain/ Sewage water from Reservior to Pond, Gr.-II) Pump Discharge :- 250 m3 per hour Generated Head :- 14 MWC H-Q-P Curve of pumps in test has to be submitted during the delivery As per scope of work of NIET PHED approved Make

Supply, Delivery and storage at site of Vertical Execution Motor, Motor Stool, Motor 18.5KW (frame size ND200L)/6 Pole/IE3. As per scope of work of NIET PHED approved Make

Supply Delivery of 200 mm dia Non rising spindle CIDF Sluice valve PN1.0 As per IS 14846 At suction side of pump as per direction of EIC .PHED approved Make

Supply Delivery of 200 mm dia Non rising spindle CIDF Sluice valve PN1.0 As per IS 14846 At delivery side of pump as per direction of EIC PHED approved Make

Supply Delivery of 200 mm dia CIDF single door Non return valve PN1.0 As per IS 15312 at delivery side of valve. PHED approved Make

Installation of the above supplied Pump Motor set, including removing existing damaged pumps, pump-foundations, shafts, plumer block, etc as required and construction of Pump foundations, pipe supports, valve supports, fixing of Plumer Blocks, etc. including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding Fabrication, Supply, Delivery and Storage at site of suitable size Enlarger made of MS Black Pipe conforming to IS (For Suction, Delivery & Delivery Header) along with necessary fittings viz. flanges, bolts, nuts, gaskets , etc. as reqd. to make the installation complete in all respect etc. as required to complete installation as per Hydraulic standard & IE rules in compliance with specification of NIT and upto entire satisfaction of EIC.

Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A of (Sl no. ) as per direction and to the entire satisfaction of E.I.C.

Painting the Existing running pump motro set with anticorrosive paint after scraping out the old paint and rust .

Carring the unservisable pump motor set from pump house to departmental stack yard as per direction of EIC

Add GST @18%

Add CESS @1%

ORIENTAL ENGINEERING CO. (BID ID -6276538)

WEST BENGAL ENGINEERING CO. (BID ID -6280185)

Bidder Name

ORIENTAL ENGINEERING CO.

WEST BENGAL ENGINEERING CO.

DAS ENTERPRISE