CA NO GE SOUTH AMB 66 2024 2025 PROVISION OF MECHANICAL LAUNDARY IN KLP OF AGE B R I AND AGE E M SOUTH UNDER GE SOUTH AMBALA CANTT

Amount

[B&R PORTION] Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour for brick work with sub class B bricks , straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Material and labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 finished even and fair without using extra cement, complete all as specified and directed.

Material and labour Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortor 1:4 finished even and fair without using extra cement, complete all as specified and directed.

Demolition of beams, chajjas, lintels and similar work reinforced cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified & as directed.

Material and labour machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed

Material and labour for plain cement concrete in foundation, filling & mass concrete Type D2 (1:4:8) (using 40mm graded aggregate) complete all as specified & as directed.

Material and labour 150mm thick fair cement concrete type B-2, 1:2:4 (40 mm graded aggregate) complete all as specified & as directed.

Supply and fixing steel rolling shutter 1.25mm thick lath thickness, gear operated type with bevel gear box and crank handle complete all as specified & as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surface of walls & applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre & UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit / 10 sqm over & including priming coat of exterior primer applied @ 0.90 lit /10 sqm over new surface complete all as specified & as diretced

Material and labour for preparation of new plastered surface of walls including applying two coats of Oil Bound Distamper over a coat of primer specified and as directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Forming Construction joint 50mm deep x 10mm wide filled with sealing compound grade B complete all as specified and directed.

[E&M PORTION] Supply, install, testing and commsioning Front loading Commercial washing machine with in built Hydro extractor of Capcity 30 Kg (Per Charge), operating on 415 V, 3 phase, 50 Hz Ac supply, including Inner basket & outer drum fabricated out of high quality 304 grade stainless steel, fully automatic control panel provided with PLC for automatic forwarding and reversing digital timer & temperature controller, washing machine shall have provision for driven by traingular belt for best efficiency, simple operation with start stop button and LED display light, all stainless steel parts polished in glossy finish and all mild steel parts are painted with epoxy paint and have three coats of epoxy primer layer for long lasting and havy duty operation. Technical specification are as follows :- (a) Basket Size - 900 mm dia x 500 mm depth., (b) Vol of Inner Basket - 318 Ltrs., (c) Operation Cycle - 30-40 min., (d) Opening door Size - 500 mm dia., (e) Wash Motor - 3.75 kW (5HP) Make of Motor - ABB/Siemens/Schneider., (f) Drive - Variable Frequency Drive , 5 HP Make of Drive - Crompton/Schneider/Inovanse, (g) Wash Speed - 40-50 RPM (Approx).,(h) Extract speed - 200 RPM (j) Electric Heating load - Water Immersion heater 12 kW Make - Neel/Dovy,. (k) Water Consumption - 300 Ltrs/Cycle., (l) Water Inlet - 25mm BSP having Solenoid Valve., (m) Drain - 65 mm BSP with Motorised Drain Valve (n) Door - S. S sheet fitted with toughened Glass., (o) Make of Belt - Ecodrive/Hindon/Alaska/ISI., (p) Make of bearing - ARB/NBC/SKF/URB.,(q) Thickness of SS Inner Basket - 1.5 mm to 1.6 mm SS 304 grade sheet to be punched & die sunk and duly buffed & polished. (r) Thickness of SS Outer Drum - 1.5 mm to 1.6 mm Stainless steel 304 grade., (s) Thickness of SS Sheet Front - 1.5 mm to 1.6 mm thick SS 304 grade and duly buffed & polished. (t) Main body - Made out of Mild steel plate and Channel base frame. (u) Overall Dimension - 1050mm (W) x 1200 mm (D) x 1640 mm (H). (v) Electrical Control Box - Consisting of L&T/Schneider/Seimens.

Supply, install, testing and commissioning Drying Tumbler Machine Capacity 30 Kg (Per Charge) operating on 415 v, 3 phase, 50 Hz AC Supply, front loading type with electric heated and including inner basket made of high quality 304 grade stainless steel, double wall & glass wool insulated , outer body made of mild steel, PLC for automatic forwarding and reversing digital timer & temperature controller all stainless steel parts polished in glossy finish and all mild steel parts are painted with epoxy paint and have threee coats of epoxy primer layer for long lasting and heavy duty operation, state of art control panel also including electric motor of suitable HP with Starter. Technical specification are as follows :- (a) Loading Capacity - 30 kg , (b) Operation cycle - 40-60 Min., (c) Inner Basket Size - 950mm dia x 850 mm depth., (d) Vol. of inner Basket - 602 Ltrs. (e) Basket Speed - 36-40 RPM (f) Opening Door Size - 650 mm dia Approx. (g) Drive Motor - 0.75kW 1 (HP), 415v, 3 Ph, 50 Hz AC Supply Make - ABB/Schneider/Seimens., (h) Blower Motor - 0.75kW 1 (HP), 415v, 3 Ph, 50 Hz AC Supply Make - ABB/Schneider/Seimens., (j) Loading Door - Made from mild steel fitted with thoughened glass., (k) Electric heating load - Fin type Air Heating element 18 kW Make - Neel/Dovy., (l) Waste Air Exhaust - 210 x 210 mm (m) Make of Belt - Ecodrive/Alaska/ISI., (n) Make of Bearing - ARB/NBC/SKF/URB., (o) Insulaton - Glass Wool., (p) Lint Screen - Manual cleaning lint screen of SS for easy maintenance. (q) Suction Blower - Heavy duty aluminium cast suction blower driven by independent blower. (r) Thickness of SS Inner Basket - 1mm SS Perforated sheet fitted with back & front plate 1.5 mm to 1.6 mm SS Sheet 304 grade duly buffed and polished. (s) Outer body Front, Back & Side - Made of 1.2 mm to 1.6 mm MS Sheet., (t) Overall dimension - 1050 mm W x 1500mm (D) x 1980mm (H)., (u) Electrical Control box - L&T/Schneider/Seimens NOTES for Item Srl No. 14 & 15 :- (i) PCC platform as recommended by OEM shall be constructed by the contractor within quoted rate. (ii) Water connection is available upto building wall. Plumbing works for independent water connections upto machines with GI pipe & valves of suitable size as recommended by the OEM shall be installed by the contractor within quoted rate.. (iii) Any other connected accessories required to make the machine operational shall be installed by the contractor within quoted rate.. (iv) Rates includes installation electrically / mechanically and testing complete. (v) One year manufacturer warranty including replacement of defective spares and comprehensive maintenance shall be provided by the contractor after installation within quoted rate. (vi) Rates includes 2-3 days operational training of machines to user rep.

Supply and fixing Triple pole and earth enclosure with three pin and earth plug with socket complete with one triple pole MCB 40 Amps complete all as specified and directed.

Material and labour for submain wiring of 4X16 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volt grade ISI marked with multi stranded copper conductor with one run of 16 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor connected to common earth dolly including capping & casing or concealed on wall/ceiling in PVC conduit medium grade not less than 25 mm dia ISI marked of adequate size for housing the wires complete all as specified. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) 5 runs of 16 Sqmm cable, will be measured as one unit .

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip 32x6mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 50 mm dia, GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I), complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Material & labour for earthing earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and as directed by Engineer-in-charge. Note : The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Supply and laying in trenches LT UG cable XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armoured electric power 1100 Volts grade with stranded aluminium conductor of 50 Sqmm 3.5 Core,complete all as specified and as directed.

Supply and fixing in replacement of light grade, GI tubing, of size 50mm dia, for cable protection and fixed with clamp to pole and wall with nuts and bolts complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- The punned thickness 18cm shall be considered for payment purposes.

Supply and lay bricks, common burnt clay, sub class "B', old size, laid in vertical direction to cable as cable protection complete all as specified and as directed.

Supply and fixing MCCB DB 06 way VTPN double door powder coated complete alongwith suitable size rated Bus bar, 415 Volts IP 54 protection, including MCCB 4 Pole 200 Amp as incommer. Note: Thimble/lugs of rating of MCB TPN should be used with wire for fixing in the MCB. Complete all as specified and directed.

Supply and fixing MCCB 3 pole 415V, 63 Amps suitable for VTPN DB outgoing with breaking capacity 10KA complete all as specified and directed.

NOTE:- Amount of credit of Rs. 1912.50 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender.